po/kn.po | 74 ++++++++++++++++++++++++++++++---------------------------------
1 file changed, 36 insertions(+), 38 deletions(-)
New commits:
commit fb814a7dc99d6938558704b3400f892d816ecc59
Author: shanky <shanky(a)fedoraproject.org>
Date: Thu Dec 24 07:14:55 2009 +0000
Sending translation for Kannada
diff --git a/po/kn.po b/po/kn.po
index 8d5536c..6f4b443 100644
--- a/po/kn.po
+++ b/po/kn.po
@@ -7,7 +7,7 @@ msgstr ""
"Project-Id-Version: docs-install-guide.f12-tx.kn\n"
"Report-Msgid-Bugs-To:
http://bugs.kde.org\n"
"POT-Creation-Date: 2009-09-30 11:04+0000\n"
-"PO-Revision-Date: 2009-12-22 23:35+0530\n"
+"PO-Revision-Date: 2009-12-24 12:21+0530\n"
"Last-Translator: Shankar Prasad <svenkate(a)redhat.com>\n"
"Language-Team: American English <kde-l10n-kn(a)kde.org>\n"
"MIME-Version: 1.0\n"
@@ -2019,18 +2019,13 @@ msgid "Upgrading your computer"
msgstr "ನಿಮ್ಮ ಗಣಕವನ್ನು ನವೀಕರಿಸಲಾಗುತ್ತಿದೆ"
#. Tag: para
-#: adminoptions.xml:865
-#, fuzzy, no-c-format
+#: adminoptions.xml:865, no-c-format
msgid ""
"A previous boot option, <option>upgrade</option>, has been superceded
by a "
"stage in the installation process where the installation program prompts you
"
"to upgrade or reinstall earlier versions of Fedora that it detects on your "
"system."
-msgstr ""
-"ಹಿಂದಿನ ಒಂದು ಬೂಟ್ ಆಯ್ಕೆಯಾದಂತಹ <option>ನವೀಕರಿಸು</option> ಎನ್ನುವುದು, has
been superceded by a "
-"stage in the installation process where the installation program prompts you
"
-"to upgrade or reinstall earlier versions of Fedora that it detects on your "
-"system."
+msgstr "ಹಿಂದಿನ ಒಂದು ಬೂಟ್ ಆಯ್ಕೆಯಾದಂತಹ <option>ನವೀಕರಿಸು</option> ಎನ್ನುವುದು
ಅನುಸ್ಥಾಪನಾ ಪ್ರಕ್ರಿಯೆಯಲ್ಲಿ ಒಂದು ಹಂತ ಕೆಳಕ್ಕೆ ತರಲಾಗಿದ್ದು, ಇಲ್ಲಿ ಫೆಡೋರವು ನಿಮ್ಮ ಗಣಕದಲ್ಲಿ
ಗುರುತಿಸುವ ಈಗಾಗಲೆ ಇರುವ ಹಿಂದಿನ ಆವೃತ್ತಿಯನ್ನು ನವೀಕರಿಸುವಂತೆ ಅಥವ ಮರಳಿ ಅನುಸ್ಥಾಪಿಸುವಂತೆ ಅನುಸ್ಥಾಪನಾ
ಪ್ರೊಗ್ರಾಮ್ ಕೇಳುತ್ತದೆ."
#. Tag: para
#: adminoptions.xml:869
@@ -2165,7 +2160,7 @@ msgid ""
"The following table is a possible partition setup for a system with a "
"single, new 80 GB hard disk and 1 GB of RAM. Note that approximately 10 GB "
"of the volume group is unallocated to allow for future growth."
-msgstr ""
+msgstr "ಈ ಕೆಳಗಿನ ಕೋಷ್ಟಕವು ಒಂದೆ ಒಂದು, ಹೊಸತಾದ 80 GB ಹಾರ್ಡ್ ಡಿಸ್ಕ್ ಹಾಗು 1 GB ಯಷ್ಟು RAM
ಅನ್ನು ಹೊಂದಿರುವ ವ್ಯವಸ್ಥೆಯಲ್ಲಿ ಬಳಸಬಹುದಾದಂತಹ ಒಂದು ವಿಭಜನಾ ಸಿದ್ಧತೆಯನ್ನು ತೋರಿಸುತ್ತದೆ. ಸುಮಾರು 10
GB ಯಷ್ಟು ಜಾಗವನ್ನು ಭವಿಷ್ಯದಲ್ಲಿನ ಬೆಳವಣಿಗೆಗಾಗಿ ನಿಯೋಜಿಸದೆ ಉಳಿಸಲಾಗುತ್ತದೆ."
#. Tag: title
#: Advice_on_Partitions.xml:86
@@ -2444,7 +2439,7 @@ msgid ""
"options</guilabel>, then select <guilabel>Add iSCSI
target</guilabel>, then "
"select <guilabel>Add drive</guilabel>. Provide an IP address and the
iSCSI "
"initiator name, and select <guilabel>Add drive</guilabel>."
-msgstr ""
+msgstr "ಫೆಡೋರವನ್ನು <firstterm>iSCSI</firstterm> ಪ್ರೊಟೊಕಾಲ್ನಿಂದ
ಜೋಡಿಸಲಾಗಿರುವ ಒಂದು ಡ್ರೈವ್ಗೆ ಅನುಸ್ಥಾಪಿಸ ಬೇಕಿದ್ದರೆ, <guilabel>ಸುಧಾರಿತ ಶೇಖರಣಾ
ಆಯ್ಕೆಗಳು</guilabel> ಅನ್ನು ಆಯ್ಕೆ ಮಾಡಿ, ನಂತರ <guilabel>iSCSI ಗುರಿಯನ್ನು
ಸೇರಿಸು</guilabel> ಅನ್ನು ಆಯ್ಕೆ ಮಾಡಿ, ನಂತರ <guilabel>ಡ್ರೈವನ್ನು
ಸೇರಿಸು</guilabel> ಅನ್ನು ಆರಿಸಿ. ಒಂದು IP ವಿಳಾಸ ಹಾಗು iSCSI ಆರಂಭಕದ ಹೆಸರನ್ನು ಒದಗಿಸಿ, ನಂತರ
<guilabel>ಡ್ರೈವನ್ನು ಸೇರಿಸು</guilabel> ಅನ್ನು ಆಯ್ಕೆ ಮಾಡಿ."
#. Tag: para
#: Automatic_Partitioning_common-para-6.xml:21
@@ -2523,7 +2518,7 @@ msgid ""
"Also specify the <guilabel>Directory holding images</guilabel>. Enter
the "
"full directory path from the drive that contains the ISO image files. The "
"following table shows some examples of how to enter this information:"
-msgstr ""
+msgstr "<guilabel>ಚಿತ್ರಿಕೆಗಳನ್ನು ಹೊಂದಿರುವ ಕೋಶ</guilabel>ವನ್ನೂ ಸಹ
ಸೂಚಿಸಬೇಕು. ISO ಚಿತ್ರಿಕೆ ಕಡತಗಳನ್ನು ಹೊಂದಿರುವ ಸಂಪೂರ್ಣ ಕೋಶದ ಮಾರ್ಗವನ್ನು ನಮೂದಿಸಿ. ಈ ಮಾಹಿತಿಯನ್ನು
ಹೇಗೆ ನಮೂದಿಸಬೇಕು ಎನ್ನುವುದನ್ನು ಈ ಕೆಳಗಿನ ಕೋಷ್ಟಕದಲ್ಲಿ ಕೆಲವ ಉದಾಹರಣೆಗಳ ಮೂಲಕದಲ್ಲಿ
ತೋರಿಸಲಾಗಿದೆ:"
#. Tag: para
#: Beginning_Installation_Hard_Disk_common-para-11.xml:5
@@ -12915,6 +12910,8 @@ msgid ""
"<application>NetworkManager</application> will call the iscsi
initscript. "
"See:
<filename>/etc/NetworkManager/dispatcher.d/04-iscsi</filename>"
msgstr ""
+"ಜಾಲಬಂಧವನ್ನು ನಿಲುಕಿಸಿಕೊಳ್ಳಲು <application>NetworkManager</application>
ಅನ್ನು ಬಳಸುವಾಗ "
+"(ಪುರಾತನವಾದ ಜಾಲಬಂಧ ಸೇವಾ ಸ್ಕ್ರಿಪ್ಟ್ ಬದಲಿಗೆ), iscsi initscript ಅನ್ನು
<application>NetworkManager</application> ಸಕ್ರಿಯಗೊಳಿಸುತ್ತದೆ:
<filename>/etc/NetworkManager/dispatcher.d/04-iscsi</filename> ಅನ್ನು
ನೋಡಿ"
#. Tag: para
#: iSCSI.xml:53
@@ -12924,6 +12921,8 @@ msgid ""
"usr</filename>, you cannot use it to configure network access if
<filename>/"
"usr</filename> is on network-attached storage such as an iSCSI target."
msgstr ""
+"ಏಕೆಂದರೆ <application>NetworkManager</application> ಅನ್ನು
<filename>/"
+"usr</filename> ನಲ್ಲಿ ಅನುಸ್ಥಾಪಿಸಲಾಗಿರುತ್ತದೆ, ಎಲ್ಲಿಯಾದರೂ
<filename>/usr</filename> iSCSI ಗುರಿಯಂತಹ ಒಂದು ಜಾಲಬಂಧದಿಂದ-ಜೋಡಿಸಲಾದಂತಹ
ಶೇಖರಣಯಲ್ಲಿದ್ದರೆ ಅದನ್ನು ನೀವು ಸಂರಚಿಸಲು ಸಾಧ್ಯವಿರುವುದಿಲ್ಲ."
#. Tag: para
#: iSCSI.xml:58
@@ -13412,7 +13411,7 @@ msgid ""
"<command>--encrypted</command> — Should all devices with
support be "
"encrypted by default? This is equivalent to checking the
<guilabel>Encrypt</"
"guilabel> checkbox on the initial partitioning screen."
-msgstr ""
+msgstr "<command>--encrypted</command> — ಬೆಂಬಲಿಸಲಾಗುವ ಎಲ್ಲಾ
ಸಾಧನವನ್ನು ಪೂರ್ವನಿಯೋಜಿತವಾಗಿ ಗೂಢಲಿಪೀಕರಿಸಬೇಕೆ? ಇದು ಆರಂಭಿಕ ವಿಭಜನಾ ತೆರೆಯಲ್ಲಿ
<guilabel>ಗೂಢಲಿಪೀಕರಿಸು</guilabel> ಎಂಬ ಗುರುತು ಚೌಕದಲ್ಲಿ ಗುರುತು ಹಾಕುವುದಕ್ಕೆ
ಸಮನಾಗಿರುತ್ತದೆ."
#. Tag: para
#: Kickstart2.xml:233
@@ -14090,6 +14089,8 @@ msgid ""
"for an NFS mount are allowed. The options are listed in the
<command>nfs(5)</"
"command> man page. Multiple options are separated with a comma."
msgstr ""
+"<command>--opts=</command> — NFS ರಫ್ತನ್ನು ಆರೋಹಿಸುವಾಗ
ಬಳಸಬೇಕಿರುವ ಆರೋಹಣಾ ಆಯ್ಕೆ. ಒಂದು NFS ಆರೋಹಣಕ್ಕಾಗಿ ಬಳಸಲಾಗುವ ಯಾವುದೆ ಆಯ್ಕೆಗಳನ್ನು
<filename>/etc/fstab</filename> ನಲ್ಲಿ ಸೂಚಿಸಬಹುದಾಗಿದೆ. ಆಯ್ಕೆಗಳನ್ನು
<command>nfs(5)</"
+"command> ಮ್ಯಾನ್ ಪುಟದಲ್ಲಿ ಪಟ್ಟಿ ಮಾಡಲಾಗಿದೆ. ಹಲವಾರು ಆಯ್ಕೆಗಳನ್ನು ಸೂಚಿಸುವಾಗ ನಡುವೆ
ವಿರಾಮ ಚಿಹ್ನೆಯನ್ನು ಬಳಸಬಹುದಾಗಿದೆ."
#. Tag: term
#: Kickstart2.xml:638
@@ -15226,7 +15227,7 @@ msgid ""
"Note that although the presentation of this example on this page has broken "
"the line, in a real kickstart file, you must include all this information on
"
"a single line with no break."
-msgstr ""
+msgstr "ಈ ಉದಾಹರಣೆಯಲ್ಲಿ ಸಾಲನ್ನು ತುಂಡರಿಸಿ ತೋರಿಸಲಾಗಿದೆಯಾದರೂ ಸಹ, ನಿಜವಾದ ಕಿಕ್ಸ್ಟಾರ್ಟ್
ಕಡತದಲ್ಲಿ, ಈ ಮಾಹಿತಿಯನ್ನು ಮಧ್ಯದಲ್ಲಿ ತುಂಡಾಗದಂತೆ ಕೇವಲ ಒಂದೇ ಸಾಲಿನಲ್ಲಿ ಬರುವಂತೆ ಸೂಚಿಸಬೇಕು
ಎನ್ನುವುದನ್ನು ನೆನಪಿಡಿ."
#. Tag: screen
#: Kickstart2.xml:1383, no-c-format
@@ -15499,7 +15500,7 @@ msgid ""
"The recommended maximum swap size for machines with less than 2GB of RAM is "
"twice the amount of RAM. For machines with 2GB or more, this recommendation "
"changes to 2GB plus the amount of RAM."
-msgstr ""
+msgstr "2GB ಗಿಂತ ಕಡಿಮೆ RAM ಅನ್ನು ಹೊಂದಿರುವ ಗಣಕಗಳಲ್ಲಿ ಗರಿಷ್ಟ ಸ್ವಾಪ್ ಗಾತ್ರವು RAM ನ
ಎರಡರಷ್ಟು ಇರಬೇಕೆಂದು ಸಲಹೆ ಮಾಡಲಾಗುತ್ತದೆ. 2GB ಅಥವ ಹೆಚ್ಚಿನ RAM ಅನ್ನು ಹೊಂದಿರುವ ಗಣಕಗಳಲ್ಲಿ, 2GB ಯ
ಜೊತೆಗೆ RAM ನಷ್ಟು ಮೊತ್ತದ ಸ್ವಾಪ್ ಅನ್ನು ಹೊಂದುವಂತೆ ಸಲಹೆ ಮಾಡಲಾಗುತ್ತದೆ."
#. Tag: command
#: Kickstart2.xml:1596
@@ -15709,7 +15710,7 @@ msgid ""
"command> option, this option does nothing. If no passphrase is specified,
"
"the default system-wide one is used, or the installer will stop and prompt "
"if there is no default."
-msgstr ""
+msgstr "<command>--passphrase=</command> — ಇದು ಈ ವಿಭಾಗವನ್ನು
ಗೂಢಲಿಪೀಕರಿಸುವಾಗ ಬಳಸಬೇಕಿರುವ ಗುಪ್ತಪದವನ್ನು ಸೂಚಿಸುತ್ತದೆ. ಮೇಲಿನ
<command>--encrypted</command> ಆಯ್ಕೆ ಇಲ್ಲದೆ, ಈ ಆಯ್ಕೆಯು ಏನನ್ನೂ ಮಾಡುವುದಿಲ್ಲ.
ಯಾವುದೆ ಗುಪ್ತಪದವನ್ನು ಸೂಚಿಸದೆ ಇದ್ದಲ್ಲಿ, ಪೂರ್ವನಿಯೋಜಿತ ವ್ಯವಸ್ಥೆಯಾದ್ಯಂತ ಬಳಸಲಾಗುವದನ್ನೇ ಇಲ್ಲೂ
ಬಳಸಲಾಗುತ್ತದೆ ಅಥವ ಯಾವುದೆ ಪೂರ್ವನಿಯೋಜಿತವಿಲ್ಲದೆ ಹೋದಲ್ಲಿ ಅನುಸ್ಥಾಪಕವು ನಿಲ್ಲಲ್ಪಟ್ಟು ಒದಗಿಸುವಂತೆ
ಕೇಳುತ್ತದೆ."
#. Tag: para
#: Kickstart2.xml:1727
@@ -15931,7 +15932,7 @@ msgid ""
"command> option, this option does nothing. If no passphrase is specified,
"
"the default system-wide one is used, or the installer will stop and prompt "
"if there is no default."
-msgstr ""
+msgstr "<command>--passphrase=</command> — ಇದು ಈ RAID
ಸಾಧನವನ್ನು ಗೂಢಲಿಪೀಕರಿಸುವಾಗ ಬಳಸಬೇಕಿರುವ ಗುಪ್ತಪದವನ್ನು ಸೂಚಿಸುತ್ತದೆ. ಮೇಲಿನ
<command>--encrypted</command> ಆಯ್ಕೆ ಇಲ್ಲದೆ, ಈ ಆಯ್ಕೆಯು ಏನನ್ನೂ ಮಾಡುವುದಿಲ್ಲ.
ಯಾವುದೆ ಗುಪ್ತಪದವನ್ನು ಸೂಚಿಸದೆ ಇದ್ದಲ್ಲಿ, ಪೂರ್ವನಿಯೋಜಿತ ವ್ಯವಸ್ಥೆಯಾದ್ಯಂತ ಬಳಸಲಾಗುವದನ್ನೇ ಇಲ್ಲೂ
ಬಳಸಲಾಗುತ್ತದೆ ಅಥವ ಯಾವುದೆ ಪೂರ್ವನಿಯೋಜಿತವಿಲ್ಲದೆ ಹೋದಲ್ಲಿ ಅನುಸ್ಥಾಪಕವು ನಿಲ್ಲಲ್ಪಟ್ಟು ಒದಗಿಸುವಂತೆ
ಕೇಳುತ್ತದೆ."
#. Tag: para
#: Kickstart2.xml:1852
@@ -20638,8 +20639,8 @@ msgid ""
msgstr "ಬೂಟ್ ಮಾಡಬಹುದಾದಂತಹ USB ಮಾಧ್ಯಮವನ್ನು ನಿರ್ಮಿಸಲು, ಒಂದು ಫೆಡೋರ ಲೈವ್ ಚಿತ್ರಿಕೆಯನ್ನು
ಬಳಸಿ. ಬೂಟ್ ಮಾಡಬಹುದಾದ USB ಮಾಧ್ಯಮವನ್ನು ನಿರ್ಮಿಸಲು Windows ಅಥವ Linux ವ್ಯವಸ್ಥೆಯನ್ನು
ಬಳಸಿ."
#. Tag: title
-#: Making_USB_media.xml:12
-#, fuzzy, no-c-format
+#: Making_USB_media.xml:12, no-c-format
+#, fuzzy
msgid "USB Image Writing is Nondestructive"
msgstr "USB ಚಿತ್ರಿಕೆ ಬರೆಯುವಿಕೆಯು "
@@ -26018,7 +26019,7 @@ msgstr ""
#: pxe-server.xml:71
#, no-c-format
msgid "Network Locations"
-msgstr ""
+msgstr "ಜಾಲಬಂಧ ಸ್ಥಳಗಳು"
#. Tag: para
#: pxe-server.xml:72
@@ -26090,7 +26091,7 @@ msgstr "<![CDATA[/mnt/dvd *(ro,async)]]>"
#: pxe-server.xml:93
#, no-c-format
msgid "Start the NFS server using the following commands:"
-msgstr ""
+msgstr "ಈ ಕೆಳಗಿನ ಆಜ್ಞೆಯನ್ನು ಬಳಸಿಕೊಂಡು NFS ಪರಿಚಾರಕವನ್ನು ಆರಂಭಿಸಿ:"
#. Tag: screen
#: pxe-server.xml:94
@@ -26136,7 +26137,7 @@ msgstr ""
#: pxe-server.xml:108
#, no-c-format
msgid "Mirroring a Network Location"
-msgstr ""
+msgstr "ಒಂದು ಜಾಲಬಂಧ ಸ್ಥಳದ ತದ್ರೂಪು ಮಾಡುವಿಕೆ"
#. Tag: para
#: pxe-server.xml:109
@@ -26191,7 +26192,7 @@ msgstr ""
#: pxe-server.xml:131
#, no-c-format
msgid "Importing the Distribution"
-msgstr ""
+msgstr "ವಿತರಣೆಯನ್ನು ಆಮದು ಮಾಡಿಕೊಳ್ಳುವಿಕೆ"
#. Tag: para
#: pxe-server.xml:132
@@ -26253,7 +26254,7 @@ msgstr ""
#: pxe-server.xml:151
#, no-c-format
msgid "Importing a Source"
-msgstr ""
+msgstr "ಒಂದು ಆಕರವನ್ನು ಆಮದು ಮಾಡಿಕೊಳ್ಳುವಿಕೆ"
#. Tag: para
#: pxe-server.xml:152
@@ -26324,7 +26325,7 @@ msgstr
"http://<replaceable>192.168.1.1</replaceable>:/distro"
msgid ""
"If necessary, replace <replaceable>192.168.1.1</replaceable> with the
IP "
"address for your <command>cobbler</command> server."
-msgstr ""
+msgstr "ಅಗತ್ಯಬಿದ್ದಲ್ಲಿ, <replaceable>192.168.1.1</replaceable> ಅನ್ನು
ನಿಮ್ಮ <command>cobbler</command> ಪರಿಚಾರಕದ IP ವಿಳಾಸದೊಂದಿಗೆ ಬದಲಾಯಿಸಿ."
#. Tag: para
#: pxe-server.xml:184
@@ -26333,7 +26334,7 @@ msgid ""
"Run the command <command>cobbler sync</command> to apply the changes.
To "
"check that your <command>cobbler</command> server is listening on the
"
"correct ports, use the <command>netstat -lp</command> command."
-msgstr ""
+msgstr "ಬದಲಾವಣೆಗಳು ಕಾರ್ಯ ರೂಪಕ್ಕೆ ಬರಲು <command>cobbler sync</command>
ಆಜ್ಞೆಯನ್ನು ಚಲಾಯಿಸಿ. ನಿಮ್ಮ <command>cobbler</command>ಪರಿಚಾರಕವು ಸರಿಯಾದ
ಸಂಪರ್ಕಸ್ಥಾನದಲ್ಲಿ ಆಲಿಸುತ್ತಿದೆ ಎಂದು ಪರಿಶೀಲಿಸಲು, <command>netstat -lp</command>
ಆಜ್ಞೆಯನ್ನು ಬಳಸಿ."
#. Tag: para
#: pxe-server.xml:190
@@ -27299,13 +27300,13 @@ msgid ""
"Major update, incorporating material from the <citetitle>Red Hat Enterprise
"
"Linux Installation Guide</citetitle> and elsewhere, plus fixes for numerous
"
"bugs"
-msgstr ""
+msgstr "ಪ್ರಮುಖ ಅಪ್ಡೇಟ್, <citetitle>Red Hat ಎಂಟರ್ಪ್ರೈಸ್ ಲಿನಕ್ಸ್ ಅನುಸ್ಥಾಪನಾ
ಮಾರ್ಗದರ್ಶಿ</citetitle> ಹಾಗು ಬೇರೆ ಕಡೆಗಳಿಂದ ವಿಷಯವನ್ನು ಅಳವಡಿಸುತ್ತದೆ, ಜೊತೆಗೆ ಹಲವಾರು
ದೋಷಗಳ ಪರಿಹಾರಗವನ್ನು ಒದಗಿಸುತ್ತದೆ"
#. Tag: member
#: Revision_History.xml:74
#, no-c-format
msgid "Convert to build in Publican"
-msgstr ""
+msgstr "ಪಬ್ಲಿಕನ್ನಲ್ಲಿ ನಿರ್ಮಾಣವನ್ನು ಮಾರ್ಪಡಿಸುವುದು"
#. Tag: author
#: Revision_History.xml:81
@@ -27321,7 +27322,7 @@ msgstr ""
#: Revision_History.xml:88
#, no-c-format
msgid "Build and publish Fedora 10 version"
-msgstr ""
+msgstr "ಫೆಡೋರ 10 ರ ಆವೃತ್ತಿಯನ್ನು ನಿರ್ಮಿಸಿ ಹಾಗು ಪ್ರಕಟಿಸಿ"
#. Tag: author
#: Revision_History.xml:95
@@ -27337,13 +27338,13 @@ msgstr ""
#: Revision_History.xml:103
#, no-c-format
msgid "Prepare for release of Fedora 10"
-msgstr ""
+msgstr "ಫೆಡೋರ 10 ರ ಬಿಡುಗಡೆಗಾಗಿ ಸಿದ್ಧಗೊಳಿಸಿ"
#. Tag: member
#: Revision_History.xml:118
#, no-c-format
msgid "Fix incorrect livecd-tools instructions"
-msgstr ""
+msgstr "ಸರಿಯಲ್ಲದ livecd-ಉಪಕರಣದ ಸೂಚನೆಗಳನ್ನು ಸರಿಪಡಿಸಿ"
#. Tag: member
#: Revision_History.xml:133
@@ -27489,7 +27490,7 @@ msgid ""
"Download the <filename>boot.iso</filename> image file as described in
<xref "
"linkend=\"sn-which-files\"/> and use the
<application>livecd-iso-to-disk</"
"application> script to copy it to your USB device:"
-msgstr ""
+msgstr "<xref linkend=\"sn-which-files\"/> ನಲ್ಲಿ ವಿವರಿಸಿದಂತೆ
<filename>boot.iso</filename> ಚಿತ್ರಿಕಾ ಕಡತವನ್ನು ಡೌನ್ಲೋಡ್ ಮಾಡಿಕೊಳ್ಳಿ ಹಾಗು
ನಿಮ್ಮ USB ಸಾಧನಕ್ಕೆ ಇದನ್ನು ಕಾಪಿ ಮಾಡಲು
<application>livecd-iso-to-disk</application> ಸ್ಕ್ರಿಪ್ಟನ್ನು ಬಳಸಿ:"
#. Tag: screen
#: Steps_Cdrom-x86.xml:69, no-c-format
@@ -27739,7 +27740,7 @@ msgid ""
"The most recent list of supported hardware can be found in the Release Notes
"
"for Fedora &PRODVER;, available at <ulink
url=\"http://docs.fedoraproject."
"org/release-notes\">http://docs.fedoraproject.org/release-notes</ulink>
."
-msgstr ""
+msgstr "ಬೆಂಬಲಿಸಲಾಗುವ ಯಂತ್ರಾಂಶದ ಒಂದು ಇತ್ತೀಚಿನ ಪಟ್ಟಿಯನ್ನು ಫೆಡೋರ &PRODVER; ರ
ಬಿಡುಗಡೆ ಟಿಪ್ಪಣಿಗಳಲ್ಲಿ ನೋಡಬಹುದಾಗಿದೆ, ಅದು <ulink
url=\"http://docs.fedoraproject.org/release-notes\">http://d...
ಲಭ್ಯವಿದೆ."
#. Tag: para
#: Steps_Hardware-x86.xml:23
@@ -28573,7 +28574,7 @@ msgstr ""
#: techref.xml:86
#, no-c-format
msgid "Graphics System"
-msgstr ""
+msgstr "ಗ್ರಾಫಿಕ್ಸ್ ವ್ಯವಸ್ಥೆ"
#. Tag: para
#: techref.xml:88
@@ -32390,8 +32391,7 @@ msgstr ""
"<keycap>Enter</keycap> ಅನ್ನು ಒತ್ತಿ. ಇದು
<application>gedit</application> ಪಠ್ಯ ಸಂಪಾದಕದಲ್ಲಿ
<filename>grub.conf</filename> ಕಡತವನ್ನು ತೆರೆಯುತ್ತದೆ."
#. Tag: para
-#: X86_Uninstall-Linux-bootloader.xml:27
-#, fuzzy, no-c-format
+#: X86_Uninstall-Linux-bootloader.xml:27, no-c-format
msgid ""
"A typical Fedora entry in the <filename>grub.conf</filename> file
consists "
"of four lines: <example> <title>Example Fedora entry in
<filename>grub.conf</"
@@ -32408,9 +32408,7 @@ msgstr ""
"<para> root (hd0,1) </para> <para> kernel
/vmlinuz-2.6.27.19-170.2.35.fc10."
"i686 ro root=UUID=04a07c13-e6bf-6d5a-b207-002689545705 rhgb quiet </para>
"
"<para> initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img </para>
</example> "
-"Depending on the configuration of your system, there may be multiple Fedora "
-"entries in <filename>grub.conf</filename>, each corresponding to a
different "
-"version of the Linux kernel. Delete each of the Fedora entries from the
file."
+"ನಿಮ್ಮ ವ್ಯವಸ್ಥೆಯ ಸಂರಚನೆಗೆ ಅನುಗುಣವಾಗಿ, <filename>grub.conf</filename>
ನಲ್ಲಿ ಅನೇಕ ಫೆಡೋರ ನಮೂದುಗಳು ಇರಬಹುದು, ಹಾಗು ಇವುಗಳಳಲ್ಲಿ ಪ್ರತಿಯೊಂದೂ ಸಹ ಪ್ರತ್ಯೇಕ ಲಿನಕ್ಸ್ ಕರ್ನಲ್
ಆವೃತ್ತಿಯನ್ನು ಪ್ರತಿನಿಧಿಸುತ್ತವೆ. ಕಡತದಿಂದ ಪ್ರತಿ ಫೆಡೋರ ನಮೂದುಗಳನ್ನೂ ಅಳಿಸಿ ಹಾಕಿ."
#. Tag: para
#: X86_Uninstall-Linux-bootloader.xml:48