config file and initscript
--
Matt Domsch
Software Architect
Dell Linux Solutions
linux.dell.com &
www.dell.com/linux
Linux on Dell mailing lists @
http://lists.us.dell.com
--- /dev/null 2005-05-08 18:50:01.506062864 -0500
+++ OpenIPMI/ipmi.sysconf 2005-05-19 16:43:13.000000000 -0500
@@ -0,0 +1,30 @@
+# Enable standard hardware interfaces (KCS, BT, SMIC)
+# You probably want this enabled.
+IPMI_SI=1
+
+# Enable nonstandard interfaces (SMB via i2c)
+# IPMI_SMB=1
+
+# Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd,
+# and other userspace IPMI-using applications.
+# You probably want this enabled.
+DEV_IPMI=1
+
+# Enable IPMI_WATCHDOG if you want the IPMI watchdog
+# to reboot the system if it hangs
+# IPMI_WATCHDOG=1
+
+# Enable IPMI_POWEROFF if you want the IPMI
+# poweroff module to be loaded.
+# IPMI_POWEROFF=1
+
+# Enable IPMI_POWERCYCLE if you want the system to be power-cycled (power
+# down, delay briefly, power on) rather than power off, on systems
+# that support such. IPMI_POWEROFF=1 is also required.
+# IPMI_POWERCYCLE=1
+
+# Enable "legacy" interfaces for applications
+# Intel IMB driver interface
+# IPMI_IMB=1
+# Radisys driver interface
+# IPMI_RADISYS=1
--- /dev/null 2005-05-08 18:50:01.506062864 -0500
+++ OpenIPMI/ipmi.init 2005-05-19 16:42:58.000000000 -0500
@@ -0,0 +1,196 @@
+#!/bin/sh
+#############################################################################
+#
+# ipmi: OpenIPMI Driver init script
+#
+# Authors: Matt Domsch <Matt_Domsch(a)dell.com>
+# Chris Poblete <Chris_Poblete(a)dell.com>
+#
+# chkconfig: - 04 96
+# description: OpenIPMI Driver init script
+#
+### BEGIN INIT INFO
+# Provides: ipmidrv
+# Required-Start: $localfs $remotefs $syslog
+# Required-Stop: $localfs $remotefs $syslog
+# Default-Start:
+# Default-Stop:
+# Short-Description: OpenIPMI Driver init script
+# Description: OpenIPMI Driver init script
+### END INIT INFO
+#
+#############################################################################
+# for log_success_msg and friends
+[ -r /lib/lsb/init-functions ] && . /lib/lsb/init-functions
+# source config info
+[ -r /etc/sysconfig/ipmi ] && . /etc/sysconfig/ipmi
+
+#############################################################################
+# GLOBALS
+#############################################################################
+MODULE_NAME="ipmi"
+INTF_NUM=0
+
+IPMI_SMB_MODULE_NAME="ipmi_smb"
+IPMI_SI_MODULE_NAME="ipmi_si"
+kernel=`uname -r | cut -d. -f1-2`
+if [ "${kernel}" == "2.4" ]; then
+ IPMI_SMB_MODULE_NAME="ipmi_smb_intf"
+ IPMI_SI_MODULE_NAME="ipmi_si_drv"
+fi
+
+MODULES="ipmi_radisys ipmi_imb ipmi_poweroff ipmi_watchdog \
+ ipmi_devintf ${IPMI_SMB_MODULE_NAME} ${IPMI_SI_MODULE_NAME} \
+ ipmi_msghandler"
+
+
+RETVAL=0
+LOCKFILE=/var/lock/subsys/ipmi
+
+#############################################################################
+start_watchdog()
+{
+ if [ "${IPMI_WATCHDOG}" = "1" ]; then
+ modprobe ipmi_watchdog || RETVAL=2
+ fi
+}
+
+stop_watchdog()
+{
+ modprobe -r ipmi_watchdog
+}
+
+start_powercontrol()
+{
+ local poweroff_opts=""
+ if [ "${IPMI_POWEROFF}" = "1" ]; then
+ [ "${IPMI_POWERCYCLE}" == "1" ] &&
poweroff_opts="chassis_ctrl_cmd_param=2"
+ modprobe ipmi_poweroff "${poweroff_opts}" || RETVAL=2
+ fi
+}
+
+stop_powercontrol()
+{
+ modprobe -r ipmi_poweroff
+}
+
+#############################################################################
+load_ipmi_modules ()
+{
+ modprobe ipmi_msghandler || RETVAL=1
+ if [ "${IPMI_SI}" = "1" ]; then
+ modprobe ${IPMI_SI_MODULE_NAME} || RETVAL=1
+ fi
+ if [ "${IPMI_SMB}" = "1" ]; then
+ modprobe ${IPMI_SMB_MODULE_NAME} || RETVAL=1
+ fi
+ [ "${RETVAL}" = "1" ] && return
+
+ if [ "${DEV_IPMI}" = "1" ]; then
+ modprobe ipmi_devintf || RETVAL=2
+ if [ "${RETVAL}" != "2" ]; then
+ # Note, this really should be done by udev on 2.6
+ DEVMAJOR=`cat /proc/devices | awk '/ipmidev/{print $1}'`
+ mknod -m 0600 /dev/ipmi${INTF_NUM} c ${DEVMAJOR} 0 || RETVAL=2
+ ln -sf /dev/ipmi${INTF_NUM} /dev/ipmi || RETVAL=2
+ fi
+ fi
+
+ start_watchdog
+ start_powercontrol
+ if [ "${IPMI_IMB}" = "1" ]; then
+ modprobe ipmi_imb || RETVAL=2
+ # FIXME create canonical /dev/foo entry
+ fi
+ if [ "${IPMI_RADISYS}" = "1" ]; then
+ modprobe ipmi_radisys || RETVAL=2
+ # FIXME create canonical /dev/foo entry
+ fi
+ return
+}
+
+#############################################################################
+unload_ipmi_modules()
+{
+ # Note, deleting these /dev files really should be done by udev
+ # so this function will change soon as the driver changes
+ # to allow such to happen automatically.
+ rm -f "/dev/ipmi${INTF_NUM}"
+ rm -f "/dev/ipmi"
+ for m in ${MODULES}; do
+ modprobe -q -r ${m}
+ done
+}
+
+#############################################################################
+start()
+{
+ echo -n $"Starting ${MODULE_NAME} drivers: "
+ load_ipmi_modules
+ [ "${RETVAL}" = "1" ] && log_failure_msg &&
return
+ [ "${RETVAL}" = "2" ] && touch ${LOCKFILE} &&
log_warning_msg
+ [ "${RETVAL}" = "0" ] && touch ${LOCKFILE} &&
log_success_msg
+}
+
+#############################################################################
+stop()
+{
+ echo -n $"Stopping ${MODULE_NAME} drivers: "
+ unload_ipmi_modules
+ rm -f ${LOCKFILE}
+ log_success_msg
+}
+
+#############################################################################
+restart()
+{
+ stop
+ start
+}
+
+#############################################################################
+status ()
+{
+ for m in ${MODULES}; do
+ if /sbin/lsmod | grep $m >/dev/null 2>&1 ; then
+ echo "$m module loaded"
+ else
+ echo "$m module not loaded"
+ fi
+ done
+}
+
+usage ()
+{
+ echo $"Usage: $0 {start|stop|status|restart|condrestart|"
+ echo $"
start-watchdog|stop-watchdog|start-powercontrol|stop-powercontrol}" 1>&2
+ RETVAL=1
+}
+
+condrestart ()
+{
+ [ -e ${LOCKFILE} ] && restart
+}
+
+#############################################################################
+# MAIN
+#############################################################################
+case "$1" in
+ start) start ;;
+ stop) stop ;;
+ restart) restart ;;
+ status) status ;;
+ condrestart) condrestart ;;
+ start-watchdog) start_watchdog ;;
+ stop-watchdog) stop_watchdog ;;
+ start-powercontrol) start_powercontrol ;;
+ stop-powercontrol) stop_powercontrol ;;
+ *) usage ;;
+esac
+
+exit ${RETVAL}
+
+#############################################################################
+# end of file
+#############################################################################
+