Linux version 2.6.9-1.650_devel (bhcompile@loma.build.redhat.com) (gcc version 3.4.3 20041114 (Red Hat 3.4.3-3)) #1 Mon Nov 15 18:55:19 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable) BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data) BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS) BIOS-e820: 00000000040ffc00 - 0000000020000000 (usable) BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. zapping low mappings. DMI 2.1 present. ACPI: BIOS age (1998) fails cutoff (2001), acpi=force is required to enable ACPI ACPI: Disabling ACPI support Built 1 zonelists Kernel command line: ks=http://tantra/~jorton/boot/trash.ks console=ttyS1,9600 Initializing CPU#0 CPU 0 irqstacks, hard=c03e2000 soft=c03e1000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 398.325 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 512148k/524288k available (2113k kernel code, 11576k reserved, 653k data, 144k init, 0k highmem) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium II (Deschutes) stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 3323k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1101136707.169:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 9ADF323F9B7F3153 - User ID: Red Hat, Inc. (Kernel Module GPG key) Limiting direct PCI/PCI transfers. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 isapnp: Scanning for PnP cards... isapnp: Card 'CS4236B' isapnp: 1 Plug & Play card detected total Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 440M agpgart: AGP aperture is 64M @ 0xf8000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A �ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALL CR13.0A, ATA DISK drive hdb: QUANTUM FIREBALLP KX27.3, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SAMSUNG CD-ROM SCR-3231, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=25228/16/63, UDMA(33) hda: hda1 hda2 hda3 hdb: max request size: 128KiB hdb: 53550304 sectors (27417 MB) w/418KiB Cache, CHS=53125/16/63, UDMA(33) hdb: hdb1 hdb2 hdc: ATAPI 32X CD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 37449) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: considering hdb2 ... md: adding hdb2 ... md: adding hda3 ... md: created md0 md: bind md: bind md: running: md: personality 2 is not loaded! md :do_md_run() returned -22 md: md0 stopped. md: unbind md: export_rdev(hdb2) md: unbind md: export_rdev(hda3) md: ... autorun DONE. EXT2-fs: unable to read superblock isofs_fill_super: bread failed, dev=md0, iso_blknum=16, block=32 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,0) <4>atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly. atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.