On Jul 26, 2013, at 4:53 PM, Pádraig Brady <P(a)draigBrady.com> wrote:
On 07/26/2013 09:13 PM, Miloslav Trmač wrote:
> Hello all,
> with thin provisioning available, the total and free space values
> reported by a filesystem do not necessarily mean that that much space
> is _actually_ available (the actual backing storage may be smaller, or
> shared with other filesystems).
>
> If your package reports disk space usage to users, and bases this on
> filesystem free space, please consider whether it might need to take
> LVM thin provisioning into account.
>
> The same applies if your package automatically allocates a certain
> proportion of the total or available space.
>
> A quick way to check whether your package is likely to be affected, is
> to look for statfs() or statvfs() calls in C, or the equivalent in
> your higher-level library / programming language.
Anything df(1) should do here?
Example: Creating a btrfs raid1 volume from two 2TB drives, df shows it as having 4TB
available:
# parted -l
Error: /dev/sdb: unrecognised disk label
Model: ATA VBOX HARDDISK (scsi)
Disk /dev/sdb: 2199GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Error: /dev/sdc: unrecognised disk label
Model: ATA VBOX HARDDISK (scsi)
Disk /dev/sdc: 2199GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
# mkfs.btrfs -d raid1 -m raid1 /dev/sd[bc]
WARNING! - Btrfs v0.20-rc1 IS EXPERIMENTAL
WARNING! - see
http://btrfs.wiki.kernel.org before using
adding device /dev/sdc id 2
fs created label (null) on /dev/sdb
nodesize 4096 leafsize 4096 sectorsize 4096 size 4.00TB
Btrfs v0.20-rc1
# mount /dev/sdb /mnt
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 79G 4.2G 71G 6% /
devtmpfs 1.5G 0 1.5G 0% /dev
tmpfs 1.5G 0 1.5G 0% /dev/shm
tmpfs 1.5G 680K 1.5G 1% /run
tmpfs 1.5G 0 1.5G 0% /sys/fs/cgroup
tmpfs 1.5G 4.0K 1.5G 1% /tmp
none 224G 87G 138G 39% /media/sf_chris
/dev/sdb 4.0T 56K 4.0T 1% /mnt
The explanation is that the file system isn't raid1, but rather the allocated chunks
have this attribute. Presently a volume only allocates with one profile, but the future
plan is per subvolume and even per file raid profiles. So establishing how much free space
there is on a btrfs volume is absolutely less than clear.
Anyway, I think it will cause some confusion if by "available" an application
thinks it can write out more than 2TB of data to this example volume.
Chris Murphy