Orphaning jcharts
by Markus Mayer
I've just orphand jcharts in rawhide, because I don't use it anymore and
no package depends on it.
If you are interested in maintaining it, feel free to take it.
regards,
Markus
10 years, 6 months
F21/F22 System Wide Change: Python 3 as the Default Implementation
by Jaroslav Reznik
= Proposed System Wide Change: Python 3 as the Default Implementation =
https://fedoraproject.org/wiki/Changes/Python_3_as_Default
Note: Change requested by FESCo in advance for targeted Fedora.
Change owner(s): Slavek Kabrda <bkabrda(a)redhat.com>, Matej Stuchlik
<mstuchli(a)redhat.com>
Up until now, Fedora has used Python 2 as the default Python implementation.
This change proposes switching to Python 3. The details of the term
"switching" are explained thoroughly in the Scope section.
== Detailed description ==
Python 3 is the next generation of Python programming language. It is
currently mature and stable, since it has been under active development for
five years - version 3.0 was released in December 2008, current latest stable
version is 3.3.2 released in May 2013. The main reason to switch to Python 3
as the default implementation is that Python 2 is in maintenance mode, thus
only bugfixes and security fixes are accepted upstream. Further reasons are
mentioned in the Benefit to Fedora section. For this Change to be carried out
successfully, it is necessary that the key packages in the Fedora software
stack be ported to Python 3. These are parts of the minimal buildroot, the
default package manager, programs present on the LiveCD etc. More information
on the packages involved can be found in Dependencies. While porting of some
packages is rather trivial, other packages need significant amount of work to
get rid of the Python 2 dependence.
== Scope ==
The main goal is switching to Python 3 as a default, in which state:
* DNF is the default package manager instead of Yum, which only works with
Python 2
* Python 3 is the only Python implementation in the minimal buildroot
* Python 3 is the only Python implementation on the LiveCD
* Anaconda and all of its dependencies run on Python 3
* cloud-init and all of its dependencies run on Python 3
(see Dependencies for the list of packages that need to be ported)
This will also require revisiting Python guidelines (broader discussion with
community and FPC approval - TBD). The result of the discussion will reflect in
this Change in further instructions for Fedora packagers.
There are basically two types of packages that need to undergo the conversion:
* Python extension modules and libraries that provide Python bindings -
assuming that there is upstream support, these can receive python3- subpackage
anytime without any damage to Fedora; we can then just utilize this subpackage
when switching to Python 3 (instead of using current python- subpackage).
* Packages that build with some sort of "embedded Python support", like gdb,
or Rhythmbox with its plugins. In these cases, it makes no sense to do a
python3- subpackage, since the whole package would need to be duplicated (e.g.
python3-gdb). These packages should be tested with Python 3 locally without
any modifications to how they're currently built in Fedora. When we get a Koji
side tag, these packages will switch and build against Python 3 in the side
tag.
==== Work in Fedora 21 Timeframe ====
* Proposal owners:
** Discussing changes in Python packaging guidelines with Fedora community and
FPC
** Helping upstreams with porting to Python 3
** Introducing python3- packages where appropriate, testing packages that only
build with Python once (e.g. gdb, Rhythmbox)
* Other developers:
** Hopefully the same as proposal owners.
* Release engineering:
** Nothing in F21 timeframe
* Policies and guidelines:
** As mentioned above, this will require a discussion with community and FPC
and preparation of changes to Python packaging guidelines. The changes related
to the actual switch should however be merged in F22 timeframe and only if the
switch is successful.
==== Work in Fedora 22 Timeframe ====
* Proposal owners:
** Continue the work from F21 timeframe
** Request Koji side tag and encourage packagers to rebuilt their packages
with Python 3 there
** If the switch to Python 3 is achieved in the side tag:
*** Modify comps accordingly
*** Apply the changes to Python packaging guidelines
*** Ask relengs to merge the side tag into F22
** Else:
*** Postpone the Change for another release
*** Do not merge side tag into F22
*** Do not apply changes to Python packaging guidelines
* Other developers:
** Introduce python3- subpackages where appropriate, build against Python 3 in
the side tag where appropriate
* Release engineering:
** Create the Koji side tag
** Merge the side tag back in F22 if the switch is achieved
* Policies and guidelines:
** Apply the changes to Python guidelines if the switch is achieved
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 6 months
rawhide report: 20131028 changes
by Fedora compose checker
Compose started at Mon Oct 28 08:15:02 UTC 2013
Broken deps for i386
----------------------------------------------------------
[OpenEXR_CTL]
OpenEXR_CTL-1.0.1-16.fc20.i686 requires libImath.so.6
OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIlmThread.so.6
OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIlmImf.so.7
OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIexMath.so.6
OpenEXR_CTL-1.0.1-16.fc20.i686 requires libIex.so.6
OpenEXR_CTL-1.0.1-16.fc20.i686 requires libHalf.so.6
OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmThread.so.6
OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmImf.so.7
OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIex.so.6
[R-RScaLAPACK]
R-RScaLAPACK-0.6.1-13.fc20.i686 requires libatlas.so.3
[apbs]
apbs-1.3-6.fc20.i686 requires libf77blas.so.3
apbs-1.3-6.fc20.i686 requires libatlas.so.3
[blueman]
blueman-1.23-7.fc20.i686 requires obex-data-server >= 0:0.4.3
blueman-1.23-7.fc20.i686 requires gvfs-obexftp
[cinepaint]
cinepaint-libs-1.3-9.fc19.i686 requires libImath.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libIlmThread.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libIlmImf.so.7
cinepaint-libs-1.3-9.fc19.i686 requires libIexMath.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libIex.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libHalf.so.6
[converseen]
converseen-0.6.2-2.fc20.i686 requires libMagick++-6.Q16.so.1
[cp2k]
cp2k-2.4-6.fc20.i686 requires libf77blas.so.3
cp2k-2.4-6.fc20.i686 requires libatlas.so.3
cp2k-mpich-2.4-6.fc20.i686 requires libf77blas.so.3
cp2k-openmpi-2.4-6.fc20.i686 requires libf77blas.so.3
[dayplanner]
dayplanner-0.11-1.fc21.noarch requires perl(Date::HolidayParser::iCalendar) >= 0:0.4
[derelict]
derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod
[drawtiming]
drawtiming-0.7.1-11.fc20.i686 requires libMagick++-6.Q16.so.1
[ekiga]
ekiga-4.0.1-6.fc20.i686 requires libcamel-1.2.so.45
[evolution-mapi]
evolution-mapi-3.10.1-1.fc21.i686 requires libcamel-1.2.so.45
[evolution-rss]
1:evolution-rss-0.3.94-1.fc21.i686 requires libcamel-1.2.so.45
[fatrat]
1:fatrat-1.2.0-0.14.beta2.fc20.i686 requires liblog4cpp.so.4
[freefem++]
freefem++-3.19-3.1.fc18.i686 requires libf77blas.so.3
freefem++-3.19-3.1.fc18.i686 requires libcblas.so.3
freefem++-3.19-3.1.fc18.i686 requires libatlas.so.3
freefem++-glx-3.19-3.1.fc18.i686 requires libf77blas.so.3
freefem++-glx-3.19-3.1.fc18.i686 requires libcblas.so.3
freefem++-glx-3.19-3.1.fc18.i686 requires libatlas.so.3
freefem++-mpi-3.19-3.1.fc18.i686 requires libf77blas.so.3
freefem++-mpi-3.19-3.1.fc18.i686 requires libcblas.so.3
freefem++-mpi-3.19-3.1.fc18.i686 requires libatlas.so.3
[gfal]
gfal-1.16.0-1.fc21.i686 requires libgsoap.so.3
gfal-doc-1.16.0-1.fc21.i686 requires libgsoap.so.3
gfal-python-1.16.0-1.fc21.i686 requires libgsoap.so.3
[gnome-contacts]
gnome-contacts-3.10-1.fc21.i686 requires libcamel-1.2.so.45
[gradle]
gradle-1.0-18.fc20.noarch requires plexus-container-default
[gtkd]
gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60
[httpdtap]
httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo
httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo
httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo
httpdtap-0.2-2.fc21.noarch requires apr-debuginfo
[kawa]
1:kawa-1.11-5.fc19.i686 requires servlet25
[koji]
koji-vm-1.8.0-2.fc20.noarch requires python-virtinst
[kxstitch]
kxstitch-0.8.4.1-16.fc20.i686 requires libMagick++-6.Q16.so.1
[kyua-cli]
kyua-cli-0.5-3.fc19.i686 requires liblutok.so.0
kyua-cli-tests-0.5-3.fc19.i686 requires liblutok.so.0
[libghemical]
libghemical-2.99.1-24.fc20.i686 requires libf77blas.so.3
libghemical-2.99.1-24.fc20.i686 requires libatlas.so.3
[libopensync-plugin-evolution2]
1:libopensync-plugin-evolution2-0.22-37.fc20.i686 requires libcamel-1.2.so.45
[libopensync-plugin-irmc]
1:libopensync-plugin-irmc-0.22-7.fc20.i686 requires libopenobex.so.1
[mpqc]
mpqc-2.3.1-23.fc20.i686 requires libf77blas.so.3
mpqc-2.3.1-23.fc20.i686 requires libatlas.so.3
[netdisco]
netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay)
[nifti2dicom]
nifti2dicom-0.4.6-3.fc20.i686 requires libvtksys.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkWidgets.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkVolumeRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkViews.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkTextAnalysis.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkParallel.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkInfovis.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkImaging.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkIO.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkHybrid.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGraphics.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGeovis.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGenericFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCommon.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCharts.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libgdcmMSFF.so.2.2
nifti2dicom-0.4.6-3.fc20.i686 requires libgdcmDICT.so.2.2
nifti2dicom-0.4.6-3.fc20.i686 requires libQVTK.so.5.10
[nocpulse-common]
nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI)
[nodejs-mongodb]
nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2
[obexfs]
obexfs-0.12-7.fc20.i686 requires libopenobex.so.1
[obexftp]
obexftp-0.23-15.fc20.i686 requires libopenobex.so.1
obexftp-libs-0.23-15.fc20.i686 requires libopenobex.so.1
perl-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1
python-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1
ruby-obexftp-0.23-15.fc20.i686 requires libopenobex.so.1
[octave-dicom]
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmjpeg8.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmjpeg16.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmjpeg12.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmMSFF.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmIOD.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmDSED.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmDICT.so.2.2
octave-dicom-0.1.1-5.fc20.i686 requires libgdcmCommon.so.2.2
[openbox]
gdm-control-3.5.2-2.fc20.i686 requires gnome-panel
gnome-panel-control-3.5.2-2.fc20.i686 requires gnome-panel
[ovaldi]
ovaldi-5.9.1-7.fc20.i686 requires libxalan-c.so.110
[perl-Language-Expr]
perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2)
[perl-PDL-Graphics-PLplot]
perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires perl(:MODULE_COMPAT_5.16.1)
perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires libplplotd.so.11
[pion-net]
pion-net-4.0.9-8.fc20.i686 requires liblog4cpp.so.4
[python-pandas]
python-pandas-0.12.0-1.fc21.i686 requires python-bottleneck
[python-tag]
python-tag-2013.1-1.fc20.i686 requires libboost_python.so.1.53.0
[remmina]
remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-rail.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-kbd.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-gdi.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-core.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-codec.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.i686 requires libfreerdp-channels.so.1.0
[resource-agents]
resource-agents-3.9.5-8.i686 requires /sbin/quotaon
resource-agents-3.9.5-8.i686 requires /sbin/quotacheck
resource-agents-3.9.5-8.i686 requires /bin/hostname
[rubygem-audited-activerecord]
rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4
[scala]
scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar
[spacewalk-admin]
spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base
spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert)
[subsurface]
subsurface-3.1.1-2.fc20.i686 requires libosmgpsmap.so.2
[syncevolution]
1:syncevolution-1.3.99.3-6.fc20.i686 requires libopenobex.so.1
1:syncevolution-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45
1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libopenobex.so.1
1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45
[tango]
tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60
[totpcgi]
totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html
[vdsm]
vdsm-4.12.1-4.fc21.i686 requires /bin/hostname
Broken deps for x86_64
----------------------------------------------------------
[OpenEXR_CTL]
OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libImath.so.6()(64bit)
OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIlmThread.so.6()(64bit)
OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIlmImf.so.7()(64bit)
OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIexMath.so.6()(64bit)
OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libIex.so.6()(64bit)
OpenEXR_CTL-1.0.1-16.fc20.x86_64 requires libHalf.so.6()(64bit)
OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmThread.so.6
OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIlmImf.so.7
OpenEXR_CTL-libs-1.0.1-16.fc20.i686 requires libIex.so.6
OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIlmThread.so.6()(64bit)
OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIlmImf.so.7()(64bit)
OpenEXR_CTL-libs-1.0.1-16.fc20.x86_64 requires libIex.so.6()(64bit)
[R-RScaLAPACK]
R-RScaLAPACK-0.6.1-13.fc20.x86_64 requires libatlas.so.3()(64bit)
[apbs]
apbs-1.3-6.fc20.i686 requires libf77blas.so.3
apbs-1.3-6.fc20.i686 requires libatlas.so.3
apbs-1.3-6.fc20.x86_64 requires libf77blas.so.3()(64bit)
apbs-1.3-6.fc20.x86_64 requires libatlas.so.3()(64bit)
[blueman]
blueman-1.23-7.fc20.x86_64 requires obex-data-server >= 0:0.4.3
blueman-1.23-7.fc20.x86_64 requires gvfs-obexftp
[cinepaint]
cinepaint-libs-1.3-9.fc19.i686 requires libImath.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libIlmThread.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libIlmImf.so.7
cinepaint-libs-1.3-9.fc19.i686 requires libIexMath.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libIex.so.6
cinepaint-libs-1.3-9.fc19.i686 requires libHalf.so.6
cinepaint-libs-1.3-9.fc19.x86_64 requires libImath.so.6()(64bit)
cinepaint-libs-1.3-9.fc19.x86_64 requires libIlmThread.so.6()(64bit)
cinepaint-libs-1.3-9.fc19.x86_64 requires libIlmImf.so.7()(64bit)
cinepaint-libs-1.3-9.fc19.x86_64 requires libIexMath.so.6()(64bit)
cinepaint-libs-1.3-9.fc19.x86_64 requires libIex.so.6()(64bit)
cinepaint-libs-1.3-9.fc19.x86_64 requires libHalf.so.6()(64bit)
[converseen]
converseen-0.6.2-2.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit)
[cp2k]
cp2k-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit)
cp2k-2.4-6.fc20.x86_64 requires libatlas.so.3()(64bit)
cp2k-mpich-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit)
cp2k-openmpi-2.4-6.fc20.x86_64 requires libf77blas.so.3()(64bit)
[dayplanner]
dayplanner-0.11-1.fc21.noarch requires perl(Date::HolidayParser::iCalendar) >= 0:0.4
[derelict]
derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-3-20.20130626gite70c293.fc20.x86_64 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.x86_64 requires tcod
[drawtiming]
drawtiming-0.7.1-11.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit)
[ekiga]
ekiga-4.0.1-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit)
[evolution-mapi]
evolution-mapi-3.10.1-1.fc21.i686 requires libcamel-1.2.so.45
evolution-mapi-3.10.1-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit)
[evolution-rss]
1:evolution-rss-0.3.94-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit)
[fatrat]
1:fatrat-1.2.0-0.14.beta2.fc20.i686 requires liblog4cpp.so.4
1:fatrat-1.2.0-0.14.beta2.fc20.x86_64 requires liblog4cpp.so.4()(64bit)
[freefem++]
freefem++-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit)
freefem++-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit)
freefem++-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit)
freefem++-glx-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit)
freefem++-glx-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit)
freefem++-glx-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit)
freefem++-mpi-3.19-3.1.fc18.x86_64 requires libf77blas.so.3()(64bit)
freefem++-mpi-3.19-3.1.fc18.x86_64 requires libcblas.so.3()(64bit)
freefem++-mpi-3.19-3.1.fc18.x86_64 requires libatlas.so.3()(64bit)
[gfal]
gfal-1.16.0-1.fc21.i686 requires libgsoap.so.3
gfal-1.16.0-1.fc21.x86_64 requires libgsoap.so.3()(64bit)
gfal-doc-1.16.0-1.fc21.x86_64 requires libgsoap.so.3()(64bit)
gfal-python-1.16.0-1.fc21.x86_64 requires libgsoap.so.3()(64bit)
[gnome-contacts]
gnome-contacts-3.10-1.fc21.x86_64 requires libcamel-1.2.so.45()(64bit)
[gradle]
gradle-1.0-18.fc20.noarch requires plexus-container-default
[gtkd]
gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60
gtkd-2.0.0-29.20120815git9ae9181.fc18.x86_64 requires libphobos-ldc.so.60()(64bit)
[httpdtap]
httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo
httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo
httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo
httpdtap-0.2-2.fc21.noarch requires apr-debuginfo
[kawa]
1:kawa-1.11-5.fc19.x86_64 requires servlet25
[koji]
koji-vm-1.8.0-2.fc20.noarch requires python-virtinst
[kxstitch]
kxstitch-0.8.4.1-16.fc20.x86_64 requires libMagick++-6.Q16.so.1()(64bit)
[kyua-cli]
kyua-cli-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit)
kyua-cli-tests-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit)
[libghemical]
libghemical-2.99.1-24.fc20.i686 requires libf77blas.so.3
libghemical-2.99.1-24.fc20.i686 requires libatlas.so.3
libghemical-2.99.1-24.fc20.x86_64 requires libf77blas.so.3()(64bit)
libghemical-2.99.1-24.fc20.x86_64 requires libatlas.so.3()(64bit)
[libopensync-plugin-evolution2]
1:libopensync-plugin-evolution2-0.22-37.fc20.x86_64 requires libcamel-1.2.so.45()(64bit)
[libopensync-plugin-irmc]
1:libopensync-plugin-irmc-0.22-7.fc20.x86_64 requires libopenobex.so.1()(64bit)
[mpqc]
mpqc-2.3.1-23.fc20.x86_64 requires libf77blas.so.3()(64bit)
mpqc-2.3.1-23.fc20.x86_64 requires libatlas.so.3()(64bit)
[netdisco]
netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay)
[nifti2dicom]
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtksys.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkWidgets.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkVolumeRendering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkViews.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkTextAnalysis.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkRendering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkParallel.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkInfovis.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkImaging.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkIO.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkHybrid.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGraphics.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGeovis.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGenericFiltering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkFiltering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCommon.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCharts.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libgdcmMSFF.so.2.2()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libgdcmDICT.so.2.2()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libQVTK.so.5.10()(64bit)
[nocpulse-common]
nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI)
[nodejs-mongodb]
nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2
[obexfs]
obexfs-0.12-7.fc20.x86_64 requires libopenobex.so.1()(64bit)
[obexftp]
obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit)
obexftp-libs-0.23-15.fc20.i686 requires libopenobex.so.1
obexftp-libs-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit)
perl-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit)
python-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit)
ruby-obexftp-0.23-15.fc20.x86_64 requires libopenobex.so.1()(64bit)
[octave-dicom]
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmjpeg8.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmjpeg16.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmjpeg12.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmMSFF.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmIOD.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmDSED.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmDICT.so.2.2()(64bit)
octave-dicom-0.1.1-5.fc20.x86_64 requires libgdcmCommon.so.2.2()(64bit)
[openbox]
gdm-control-3.5.2-2.fc20.x86_64 requires gnome-panel
gnome-panel-control-3.5.2-2.fc20.x86_64 requires gnome-panel
[ovaldi]
ovaldi-5.9.1-7.fc20.x86_64 requires libxalan-c.so.110()(64bit)
[perl-Language-Expr]
perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2)
[perl-PDL-Graphics-PLplot]
perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires perl(:MODULE_COMPAT_5.16.1)
perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires libplplotd.so.11()(64bit)
[pion-net]
pion-net-4.0.9-8.fc20.i686 requires liblog4cpp.so.4
pion-net-4.0.9-8.fc20.x86_64 requires liblog4cpp.so.4()(64bit)
[python-pandas]
python-pandas-0.12.0-1.fc21.x86_64 requires python-bottleneck
[python-tag]
python-tag-2013.1-1.fc20.x86_64 requires libboost_python.so.1.53.0()(64bit)
[remmina]
remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-rail.so.1.0()(64bit)
remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-kbd.so.1.0()(64bit)
remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-gdi.so.1.0()(64bit)
remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-core.so.1.0()(64bit)
remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-codec.so.1.0()(64bit)
remmina-plugins-rdp-1.0.0-8.fc20.x86_64 requires libfreerdp-channels.so.1.0()(64bit)
[resource-agents]
resource-agents-3.9.5-8.x86_64 requires /sbin/quotaon
resource-agents-3.9.5-8.x86_64 requires /sbin/quotacheck
resource-agents-3.9.5-8.x86_64 requires /bin/hostname
[rubygem-audited-activerecord]
rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4
[scala]
scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar
[spacewalk-admin]
spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base
spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert)
[subsurface]
subsurface-3.1.1-2.fc20.x86_64 requires libosmgpsmap.so.2()(64bit)
[syncevolution]
1:syncevolution-1.3.99.3-6.fc20.x86_64 requires libopenobex.so.1()(64bit)
1:syncevolution-1.3.99.3-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit)
1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libopenobex.so.1
1:syncevolution-libs-1.3.99.3-6.fc20.i686 requires libcamel-1.2.so.45
1:syncevolution-libs-1.3.99.3-6.fc20.x86_64 requires libopenobex.so.1()(64bit)
1:syncevolution-libs-1.3.99.3-6.fc20.x86_64 requires libcamel-1.2.so.45()(64bit)
[tango]
tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60
tango-2-12.20120821git7b92443.fc19.x86_64 requires libphobos-ldc.so.60()(64bit)
[totpcgi]
totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html
[vdsm]
vdsm-4.12.1-4.fc21.x86_64 requires /bin/hostname
Broken deps for armhfp
----------------------------------------------------------
[OpenEXR_CTL]
OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libImath.so.6
OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIlmThread.so.6
OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIlmImf.so.7
OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIexMath.so.6
OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libIex.so.6
OpenEXR_CTL-1.0.1-16.fc20.armv7hl requires libHalf.so.6
OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIlmThread.so.6
OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIlmImf.so.7
OpenEXR_CTL-libs-1.0.1-16.fc20.armv7hl requires libIex.so.6
[R-RScaLAPACK]
R-RScaLAPACK-0.6.1-13.fc20.armv7hl requires libatlas.so.3
[apbs]
apbs-1.3-6.fc20.armv7hl requires libf77blas.so.3
apbs-1.3-6.fc20.armv7hl requires libatlas.so.3
[blueman]
blueman-1.23-7.fc20.armv7hl requires obex-data-server >= 0:0.4.3
blueman-1.23-7.fc20.armv7hl requires gvfs-obexftp
[cinepaint]
cinepaint-libs-1.3-9.fc19.armv7hl requires libImath.so.6
cinepaint-libs-1.3-9.fc19.armv7hl requires libIlmThread.so.6
cinepaint-libs-1.3-9.fc19.armv7hl requires libIlmImf.so.7
cinepaint-libs-1.3-9.fc19.armv7hl requires libIexMath.so.6
cinepaint-libs-1.3-9.fc19.armv7hl requires libIex.so.6
cinepaint-libs-1.3-9.fc19.armv7hl requires libHalf.so.6
[cloud-init]
cloud-init-0.7.2-4.fc20.noarch requires dmidecode
[cobbler]
cobbler-2.4.0-2.fc20.noarch requires syslinux
[converseen]
converseen-0.6.2-2.fc20.armv7hl requires libMagick++-6.Q16.so.1
[cp2k]
cp2k-2.4-6.fc20.armv7hl requires libf77blas.so.3
cp2k-2.4-6.fc20.armv7hl requires libatlas.so.3
cp2k-mpich-2.4-6.fc20.armv7hl requires libf77blas.so.3
cp2k-openmpi-2.4-6.fc20.armv7hl requires libf77blas.so.3
[dayplanner]
dayplanner-0.11-1.fc21.noarch requires perl(Date::HolidayParser::iCalendar) >= 0:0.4
[drawtiming]
drawtiming-0.7.1-11.fc20.armv7hl requires libMagick++-6.Q16.so.1
[ekiga]
ekiga-4.0.1-6.fc20.armv7hl requires libcamel-1.2.so.45
[evolution-mapi]
evolution-mapi-3.10.1-1.fc21.armv7hl requires libcamel-1.2.so.45
[evolution-rss]
1:evolution-rss-0.3.94-1.fc21.armv7hl requires libcamel-1.2.so.45
[fatrat]
1:fatrat-1.2.0-0.14.beta2.fc20.armv7hl requires liblog4cpp.so.4
[fence-agents]
fence-agents-common-4.0.3-1.fc21.armv7hl requires pexpect
[gfal]
gfal-1.16.0-1.fc21.armv7hl requires libgsoap.so.3
gfal-doc-1.16.0-1.fc21.armv7hl requires libgsoap.so.3
gfal-python-1.16.0-1.fc21.armv7hl requires libgsoap.so.3
[gnome-contacts]
gnome-contacts-3.10-1.fc21.armv7hl requires libcamel-1.2.so.45
[gnome-do-plugins]
gnome-do-plugins-thunderbird-0.8.4-14.fc20.armv7hl requires thunderbird
[gradle]
gradle-1.0-18.fc20.noarch requires plexus-container-default
[gtkd]
gtkd-geany-tags-2.0.0-29.20120815git9ae9181.fc18.noarch requires gtkd = 0:2.0.0-29.20120815git9ae9181.fc18
[httpdtap]
httpdtap-0.2-2.fc21.noarch requires kernel-debuginfo
httpdtap-0.2-2.fc21.noarch requires httpd-debuginfo
httpdtap-0.2-2.fc21.noarch requires apr-util-debuginfo
httpdtap-0.2-2.fc21.noarch requires apr-debuginfo
[ipython]
python-ipython-console-0.13.2-2.fc20.noarch requires pexpect
python3-ipython-console-0.13.2-2.fc20.noarch requires python3-pexpect
[kawa]
1:kawa-1.11-5.fc19.armv7hl requires servlet25
[koji]
koji-vm-1.8.0-2.fc20.noarch requires python-virtinst
[kxstitch]
kxstitch-0.8.4.1-16.fc20.armv7hl requires libMagick++-6.Q16.so.1
[kyua-cli]
kyua-cli-0.5-3.fc19.armv7hl requires liblutok.so.0
kyua-cli-tests-0.5-3.fc19.armv7hl requires liblutok.so.0
[libghemical]
libghemical-2.99.1-24.fc20.armv7hl requires libf77blas.so.3
libghemical-2.99.1-24.fc20.armv7hl requires libatlas.so.3
[libopensync-plugin-evolution2]
1:libopensync-plugin-evolution2-0.22-37.fc20.armv7hl requires libcamel-1.2.so.45
[libopensync-plugin-irmc]
1:libopensync-plugin-irmc-0.22-7.fc20.armv7hl requires libopenobex.so.1
[mozilla-firetray]
mozilla-firetray-thunderbird-0.3.6-0.5.143svn.fc18.1.armv7hl requires thunderbird >= 0:11
[mpqc]
mpqc-2.3.1-23.fc20.armv7hl requires libf77blas.so.3
mpqc-2.3.1-23.fc20.armv7hl requires libatlas.so.3
[msp430-libc]
msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3
[netdisco]
netdisco-1.1-6.fc20.noarch requires perl(SNMP::Info::Layer2::Bay)
[nifti2dicom]
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtksys.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkWidgets.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkVolumeRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkViews.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkTextAnalysis.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkParallel.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkInfovis.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkImaging.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkIO.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkHybrid.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGraphics.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGeovis.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGenericFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCommon.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCharts.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libgdcmMSFF.so.2.2
nifti2dicom-0.4.6-3.fc20.armv7hl requires libgdcmDICT.so.2.2
nifti2dicom-0.4.6-3.fc20.armv7hl requires libQVTK.so.5.10
[nocpulse-common]
nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI)
[nodejs-mongodb]
nodejs-mongodb-1.3.19-1.fc21.noarch requires npm(bson) = 0:0.2.2
[obexfs]
obexfs-0.12-7.fc20.armv7hl requires libopenobex.so.1
[obexftp]
obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1
obexftp-libs-0.23-15.fc20.armv7hl requires libopenobex.so.1
perl-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1
python-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1
ruby-obexftp-0.23-15.fc20.armv7hl requires libopenobex.so.1
[octave-dicom]
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmjpeg8.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmjpeg16.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmjpeg12.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmMSFF.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmIOD.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmDSED.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmDICT.so.2.2
octave-dicom-0.1.1-5.fc20.armv7hl requires libgdcmCommon.so.2.2
[openbox]
gdm-control-3.5.2-2.fc20.armv7hl requires gnome-panel
gnome-panel-control-3.5.2-2.fc20.armv7hl requires gnome-panel
[ovaldi]
ovaldi-5.9.1-7.fc20.armv7hl requires libxalan-c.so.110
[perl-Language-Expr]
perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2)
[pion-net]
pion-net-4.0.9-8.fc20.armv7hl requires liblog4cpp.so.4
[pure]
pure-doc-0.57-4.fc20.noarch requires pure = 0:0.57-4.fc20
[python-pandas]
python-pandas-0.12.0-1.fc21.armv7hl requires python-bottleneck
[python-tag]
python-tag-2013.1-1.fc20.armv7hl requires libboost_python.so.1.53.0
[remmina]
remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-rail.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-kbd.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-gdi.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-core.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-codec.so.1.0
remmina-plugins-rdp-1.0.0-8.fc20.armv7hl requires libfreerdp-channels.so.1.0
[resource-agents]
resource-agents-3.9.5-8.armv7hl requires /sbin/quotaon
resource-agents-3.9.5-8.armv7hl requires /sbin/quotacheck
resource-agents-3.9.5-8.armv7hl requires /bin/hostname
[rootplot]
rootplot-2.2.1-7.fc19.noarch requires root-python
[rubygem-audited-activerecord]
rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4
[scala]
scala-2.10.3-5.fc21.noarch requires /usr/share/java/jline2/jline2.jar
[sigul]
sigul-0.100-3.fc20.noarch requires pexpect
[spacewalk-admin]
spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base
spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert)
[spring-installer]
ca-installer-20090316-14.fc20.armv7hl requires spring
spring-installer-20090316-14.fc20.armv7hl requires spring
[spring-maps-default]
spring-maps-default-0.1-11.fc20.noarch requires spring
[springlobby]
springlobby-0.169-5.fc20.armv7hl requires spring
[stylus-toolbox]
stylus-toolbox-0.2.7-6.fc20.noarch requires pexpect
[subsurface]
subsurface-3.1.1-2.fc20.armv7hl requires libosmgpsmap.so.2
[syncevolution]
1:syncevolution-1.3.99.3-6.fc20.armv7hl requires libopenobex.so.1
1:syncevolution-1.3.99.3-6.fc20.armv7hl requires libcamel-1.2.so.45
1:syncevolution-libs-1.3.99.3-6.fc20.armv7hl requires libopenobex.so.1
1:syncevolution-libs-1.3.99.3-6.fc20.armv7hl requires libcamel-1.2.so.45
[syntastic]
syntastic-d-2.3.0-11.20120917git72856e6.fc20.noarch requires ldc
[tango]
tango-doc-2-12.20120821git7b92443.fc19.noarch requires tango-devel = 0:2-12.20120821git7b92443.fc19
tango-geany-tags-2-12.20120821git7b92443.fc19.noarch requires tango = 0:2-12.20120821git7b92443.fc19
[totpcgi]
totpcgi-selinux-0.5.5-1.fc21.noarch requires file:///usr/share/doc/selinux-policy/html/index.html
[vdsm]
vdsm-4.12.1-4.fc21.armv7hl requires /bin/hostname
[yumex]
yumex-3.0.13-1.fc21.noarch requires python-pexpect
Removed package: gxine-0.5.907-10.fc20
Removed package: xine-plugin-1.0.2-8.fc20
Updated Packages:
NaturalDocs-1.52-1.fc21
-----------------------
* Mon Oct 28 2013 Lubomir Rintel (GoodData) <lubo.rintel(a)gooddata.com> - 1.52-1
- Update to a later upstream release
Size change: 37464 bytes
abi-dumper-0.99.7-1.fc21
------------------------
* Sun Oct 27 2013 Richard Shaw <hobbes1069(a)gmail.com> - 0.99.7-1
- Update to latest upstream release.
Size change: 178 bytes
baekmuk-bdf-fonts-2.2-15.fc21
-----------------------------
* Mon Oct 28 2013 Daiki Ueno <dueno(a)redhat.com> - 2.2-15
- Don't run fc-cache with /usr/share/fonts (Closes: #1021754)
Size change: -945 bytes
bwa-0.7.5a-2.fc21
-----------------
* Sun Oct 27 2013 Adam Huffman <bloch(a)verdurin.com> - 0.7.5a-2
- Remove nosse2 patch because 0.7+ versions only build on x86_64
* Sat Oct 26 2013 Adam Huffman <bloch(a)verdurin.com> - 0.7.5a-1
- Update to upstream 0.7.5a
Size change: 18427 bytes
ejabberd-2.1.13-7.fc21
----------------------
* Sun Oct 27 2013 Peter Lemenkov <lemenkov(a)gmail.com> - 2.1.13-7
- Fixed systemd service-file
Size change: 97 bytes
ghc-Diff-0.3.0-1.fc21
---------------------
* Mon Oct 28 2013 Jens Petersen <petersen(a)redhat.com> - 0.3.0-1
- update to 0.3.0
- add static provides
Size change: -15 bytes
glusterfs-3.4.1-3.fc21
----------------------
* Sun Oct 27 2013 Niels de Vos <ndevos(a)redhat.com> - 3.4.1-3
- Correctly start+stop glusterfsd.service (#1022542)
- fix "warning: File listed twice: .../glusterd.info" while building
* Sat Oct 26 2013 Niels de Vos <ndevos(a)redhat.com>
- add base-port config option to /etc/glusterd/glusterd.vol (#1023653)
* Wed Oct 09 2013 Kaleb S. KEITHLEY <kkeithle[at]redhat.com>
- nit, sync with upstream spec
* Wed Oct 09 2013 Niels de Vos <ndevos(a)redhat.com>
- glusterfs-api-devel requires glusterfs-devel (#1016938, #1017094)
* Tue Oct 01 2013 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 3.4.1-2
- resurrect /etc/init.d/glusterfsd, BUG 1014242
Size change: 3878 bytes
gnome-epub-thumbnailer-1.3-2.fc21
---------------------------------
* Sun Oct 27 2013 Yanko Kaneti <yaneti(a)declera.com> - 1.3-2
- Don't crash on failure to find a cover file - #1001559
Size change: 94 bytes
lbzip2-2.3-2.fc21
-----------------
* Sun Oct 27 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 2.3-2
- Add patch to fix sefgault during decompression
- Resolves: rhbz#1017957
- Update upstream URLs
Size change: 767 bytes
liblo-0.27-3.fc21
-----------------
* Sun Oct 27 2013 Orcan Ogetbil <oget [dot] fedora [at] gmail [dot] com> - 0.27-3
- Backported bugfix: fluidsynth-dssi dialog does not appear RHBZ#988421
Size change: -42 bytes
libnss-pgsql-1.5.0-0.10.beta.fc21
---------------------------------
* Sun Oct 27 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 1.5.0-0.10.beta
- Fix reference to docs in %description when doc dir is unversioned.
Size change: -876 bytes
libreport-2.1.9-1.fc21
----------------------
* Sat Oct 26 2013 Jakub Filak <jfilak(a)redhat.com> 2.1.9-1
- rephrase a message for missing configuration
- ask for missing configuration instead of dying
- Client API: introduce non-iteractive mode
- spec: add systemd-devel to BuildRequires
- Use log_ family instead of VERBn log calls
- Add journald support
- Modify logging to use various logging levels
- Include hostname in mailx notification
- enable reporting to Red Hat Support tool for anaconda bugs
- bugzilla: set URL field
- fix an overflow condition in parse time fn for x32 arch
- add a short explanation of private tickets - related rhbz#1011916
- don't use popup to ask for a private ticket - related rhbz#1011916
Size change: 1212 bytes
libupnp-1.6.18-4.fc21
---------------------
* Sun Oct 27 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 1.6.18-4
- Adapt to possibly unversioned doc dirs.
- Include LICENSE and THANKS in main package.
Size change: -917 bytes
mingw-postgresql-9.3.1-1.fc21
-----------------------------
* Mon Oct 28 2013 Michael Cronenworth <mike(a)cchtml.com> - 9.3.1-1
- Rebase to 9.3 branch.
Size change: 506498 bytes
msktutil-0.5.1-1.fc21
---------------------
* Sun Oct 27 2013 Ken Dreyer <ktdreyer(a)ktdreyer.com> - 0.5.1-1
- Update to 0.5.1
Size change: -1646 bytes
nss-3.15.2-3.fc21
-----------------
* Sun Oct 27 2013 Elio Maldonado <emaldona(a)redhat.com> - 3.15.2-3
- Revert one change from last commit to preserve full nss pluggable ecc supprt [1019245]
Size change: 219 bytes
octave-control-2.6.0-1.fc21
---------------------------
* Wed Nov 27 2013 Thomas Sailer <t.sailer(a)alumni.ethz.ch> - 2.6.0-1
- update to 2.6.0
Size change: 30690 bytes
perl-App-Cmd-0.321-1.fc21
-------------------------
* Sun Oct 27 2013 Emmanuel Seyman <emmanuel(a)seyman.fr> - 0.321-1
- Update to 0.321
Size change: -1776 bytes
perl-Mojolicious-4.50-1.fc21
----------------------------
* Sun Oct 27 2013 Emmanuel Seyman <emmanuel(a)seyman.fr> - 4.50-1
- Update to 4.50
Size change: 1489 bytes
perl-Net-Amazon-EC2-0.23-1.fc21
-------------------------------
* Mon Oct 28 2013 Lubomir Rintel <lkundrak(a)v3.sk> - 0.23-1
- Update to a later upstream release
Size change: 15094 bytes
perl-Net-Stomp-0.45-1.fc21
--------------------------
* Mon Oct 28 2013 Lubomir Rintel (GoodData) <lubo.rintel(a)gooddata.com> - 0.45-1
- Update to a later upstream release
Size change: 3849 bytes
perl-PadWalker-1.98-1.fc21
--------------------------
* Sun Oct 27 2013 Paul Howarth <paul(a)city-fan.org> - 1.98-1
- Update to 1.98
- Improve peek_sub error handling (CPAN RT#89679)
- Specify all dependencies
- Don't use macros for commands
- Make %files list more explicit
Size change: -272 bytes
perl-Software-License-0.103007-1.fc21
-------------------------------------
* Sun Oct 27 2013 Paul Howarth <paul(a)city-fan.org> - 0.103007-1
- Update to 0.103007
- Fix regex to allow guessing from meta things like perl_5
- Replace 'use base' with 'use parent'
- BR: perl(Try::Tiny) for the test suite
- Update patch for building with old Test::More versions
Size change: 709 bytes
php-PHP-CSS-Parser-5.1.0-1.fc21
-------------------------------
* Sun Oct 27 2013 Remi Collet <remi(a)fedoraproject.org> - 5.1.0-1
- update to 5.1.0
Size change: 903 bytes
php-tcpdf-6.0.042-1.fc21
------------------------
* Sun Oct 27 2013 Remi Collet <remi(a)fedoraproject.org> - 6.0.042-1
- update to 6.0.042
Size change: 1901 bytes
python-backports-ssl_match_hostname-3.4.0.2-1.fc21
--------------------------------------------------
* Sun Oct 27 2013 Toshio Kuratomi <toshio(a)fedoraproject.org> - 3.4.0.2-1
- Update to upstream 3.4.0.2 for a security fix
- http://bugs.python.org/issue17997
Size change: -4082 bytes
python-ptrace-0.6.5-1.fc21
--------------------------
* Sun Oct 27 2013 Terje Rosten <terje.rosten(a)ntnu.no> - 0.6.5-1
- 0.6.5
Size change: -697 bytes
rubygem-goocanvas-2.0.2-1.fc21
------------------------------
* Mon Oct 28 2013 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 2.0.2-1
- 2.0.2
Size change: -6272 bytes
rubygem-rsvg2-2.0.2-2.fc21
--------------------------
* Mon Oct 28 2013 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 2.0.2-2
- Fix Obsoletes / Provides (bug 1023341)
Size change: -977 bytes
xml-security-1.5.5-1.fc21
-------------------------
* Sun Oct 27 2013 gil cattaneo <puntogil(a)libero.it> 0:1.5.5-1
- update to 1.5.5
Size change: -88 bytes
Summary:
Added Packages: 0
Removed Packages: 2
Modified Packages: 30
Size of added packages: 0 (0 )
Size change of modified packages: 604864 (591 k)
Size of removed packages: 1518228 (1.4 M)
Size change: -913364 (-892 k)
Compose finisheded at Mon Oct 28 13:29:52 UTC 2013
10 years, 6 months
Ambassadors places in new Working Groups
by Alexandre Moine
Hi all,
Sorry for the double-post, but I think it's necessary.
Recently, some Working Groups has been created [1]. In the most of
case (except in the Server WG with Truong Anh. Tuan), we don't have
any representant of the ambassador group.
I exaggerate, because some developers are ambassadors (like C.
Wickert, H. Guémar...), but they are in these groups primary for their
skills in programming. I don't say "they are bad ambassadors", but I
think developper task + ambassador reprensentant task are too much for
one person.
I think it's a great idea to strengthens the links between ambassadors
and WG. The ambassador is an important link between users and
developpers, on my mind, he must be in these groups.
Alexandre, Fedora User and Ambassador
Ps: For more information, see the "Working Group Nominations" part in
https://fedoraproject.org/wiki/Fedora.next<https://www.google.com/url?q=https%3A%2F%2Ffedoraproject.org%2Fwiki%2FFed...>
[1]:
https://lists.fedoraproject.org/pipermail/devel/2013-October/190732.html<https://www.google.com/url?q=https%3A%2F%2Flists.fedoraproject.org%2Fpipe...>
10 years, 6 months
F-20 Branched report: 20131028 changes
by Fedora compose checker
Compose started at Mon Oct 28 09:15:03 UTC 2013
Broken deps for armhfp
----------------------------------------------------------
[blueman]
blueman-1.23-7.fc20.armv7hl requires obex-data-server >= 0:0.4.3
blueman-1.23-7.fc20.armv7hl requires gvfs-obexftp
[bwm-ng]
bwm-ng-0.6-11.1.fc20.armv7hl requires libstatgrab.so.9
[cloud-init]
cloud-init-0.7.2-7.fc20.noarch requires dmidecode
[cobbler]
cobbler-2.4.0-2.fc20.noarch requires syslinux
[condor-wallaby]
condor-wallaby-client-5.0.3-4.fc20.noarch requires python-qmf >= 0:0.9.1073306
[fts]
fts-server-3.1.1-1.fc20.armv7hl requires libactivemq-cpp.so.14
[glpi]
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Version
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Stdlib
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-ServiceManager
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Loader
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-I18n
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Cache-apc
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Cache
[gnome-do-plugins]
gnome-do-plugins-thunderbird-0.8.4-14.fc20.armv7hl requires thunderbird
[gofer]
ruby-gofer-0.75-4.fc20.noarch requires rubygem(qpid) >= 0:0.16.0
[gradle]
gradle-1.0-18.fc20.noarch requires plexus-container-default
[grass]
grass-6.4.3-2.fc20.armv7hl requires libgeos-3.3.8.so
grass-libs-6.4.3-2.fc20.armv7hl requires libgeos-3.3.8.so
[gtkd]
gtkd-geany-tags-2.0.0-29.20120815git9ae9181.fc18.noarch requires gtkd = 0:2.0.0-29.20120815git9ae9181.fc18
[kawa]
1:kawa-1.11-5.fc19.armv7hl requires servlet25
[koji]
koji-vm-1.8.0-2.fc20.noarch requires python-virtinst
[kyua-cli]
kyua-cli-0.5-3.fc19.armv7hl requires liblutok.so.0
kyua-cli-tests-0.5-3.fc19.armv7hl requires liblutok.so.0
[monotone]
monotone-1.0-11.fc19.armv7hl requires libbotan-1.8.2.so
perl-Monotone-1.0-11.fc19.armv7hl requires perl(:MODULE_COMPAT_5.16.2)
[mozilla-firetray]
mozilla-firetray-thunderbird-0.3.6-0.5.143svn.fc18.1.armv7hl requires thunderbird >= 0:11
[msp430-libc]
msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3
[nifti2dicom]
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtksys.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkWidgets.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkVolumeRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkViews.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkTextAnalysis.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkParallel.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkInfovis.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkImaging.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkIO.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkHybrid.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGraphics.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGeovis.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkGenericFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCommon.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libvtkCharts.so.5.10
nifti2dicom-0.4.6-3.fc20.armv7hl requires libQVTK.so.5.10
[nocpulse-common]
nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI)
[openbox]
gdm-control-3.5.2-2.fc20.armv7hl requires gnome-panel
gnome-panel-control-3.5.2-2.fc20.armv7hl requires gnome-panel
[openpts]
openpts-0.2.6-7.fc20.armv7hl requires tboot
[osm2pgsql]
osm2pgsql-0.82.0-1.fc20.armv7hl requires libgeos-3.3.8.so
[oyranos]
oyranos-libs-0.4.0-7.fc19.armv7hl requires libraw.so.5
[perl-BerkeleyDB]
perl-BerkeleyDB-0.53-1.fc20.armv7hl requires libdb = 0:5.3.21
[perl-Language-Expr]
perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2)
[perl-MIME-Lite-HTML]
perl-MIME-Lite-HTML-1.24-4.fc18.noarch requires perl(:MODULE_COMPAT_5.16.0)
[perl-Padre]
perl-Padre-0.90-6.fc18.noarch requires perl(:MODULE_COMPAT_5.16.0)
[pure]
pure-doc-0.57-4.fc20.noarch requires pure = 0:0.57-4.fc20
[python-tag]
python-tag-2013.1-1.fc20.armv7hl requires libboost_python.so.1.53.0
[rootplot]
rootplot-2.2.1-7.fc19.noarch requires root-python
[ruby-spqr]
ruby-spqr-0.3.6-7.fc20.noarch requires ruby-qpid-qmf
[rubygem-audited-activerecord]
rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4
[rubygem-fog]
rubygem-fog-1.11.1-1.fc20.noarch requires rubygem(nokogiri) < 0:1.6
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
scala-2.9.2-2.fc19.noarch requires /usr/share/java/jansi.jar
[scilab]
scilab-doc-5.4.1-4.fc20.noarch requires scilab = 0:5.4.1-4.fc20
scilab-tests-5.4.1-4.fc20.noarch requires scilab = 0:5.4.1-4.fc20
[shrinkwrap-resolver]
shrinkwrap-resolver-1.0.0-0.6.beta7.fc20.noarch requires aether-connector-wagon
[slic3r]
slic3r-0.9.10b-2.fc20.noarch requires perl(:MODULE_COMPAT_5.16.3)
[spacewalk-admin]
spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base
spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert)
[spring-installer]
ca-installer-20090316-14.fc20.armv7hl requires spring
spring-installer-20090316-14.fc20.armv7hl requires spring
[spring-maps-default]
spring-maps-default-0.1-11.fc20.noarch requires spring
[springlobby]
springlobby-0.169-5.fc20.armv7hl requires spring
[subsurface]
subsurface-3.1.1-2.fc20.armv7hl requires libosmgpsmap.so.2
[sugar-write]
sugar-write-79-4.fc20.noarch requires pyabiword
[syntastic]
syntastic-d-2.3.0-11.20120917git72856e6.fc20.noarch requires ldc
[tango]
tango-doc-2-12.20120821git7b92443.fc19.noarch requires tango-devel = 0:2-12.20120821git7b92443.fc19
tango-geany-tags-2-12.20120821git7b92443.fc19.noarch requires tango = 0:2-12.20120821git7b92443.fc19
[thunderbird-enigmail]
thunderbird-enigmail-1.5.2-2.fc20.armv7hl requires thunderbird >= 0:17.0.7
[thunderbird-lightning]
thunderbird-lightning-1.9.1-5.fc20.armv7hl requires thunderbird < 0:18.0
thunderbird-lightning-1.9.1-5.fc20.armv7hl requires thunderbird >= 0:17.0
[truezip]
truezip-parent-7.6.6-5.fc20.noarch requires schlichtherle-oss-parent
truezip-parent-7.6.6-5.fc20.noarch requires mvn(de.schlichtherle:oss-parent)
[vfrnav]
vfrnav-20130829-1.fc20.armv7hl requires libgeos-3.3.8.so
vfrnav-utils-20130829-1.fc20.armv7hl requires libgeos-3.3.8.so
[wallaby]
python-wallaby-0.16.0-4.fc20.noarch requires python-qpid-qmf
ruby-wallaby-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-http-server-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-utils-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
Broken deps for i386
----------------------------------------------------------
[blueman]
blueman-1.23-7.fc20.i686 requires obex-data-server >= 0:0.4.3
blueman-1.23-7.fc20.i686 requires gvfs-obexftp
[bwm-ng]
bwm-ng-0.6-11.1.fc20.i686 requires libstatgrab.so.9
[condor-wallaby]
condor-wallaby-client-5.0.3-4.fc20.noarch requires python-qmf >= 0:0.9.1073306
[derelict]
derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod
[fts]
fts-server-3.1.1-1.fc20.i686 requires libactivemq-cpp.so.14
[glpi]
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Version
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Stdlib
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-ServiceManager
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Loader
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-I18n
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Cache-apc
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Cache
[gradle]
gradle-1.0-18.fc20.noarch requires plexus-container-default
[grass]
grass-6.4.3-2.fc20.i686 requires libgeos-3.3.8.so
grass-libs-6.4.3-2.fc20.i686 requires libgeos-3.3.8.so
[gtkd]
gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60
[iwhd]
iwhd-1.6-4.fc20.i686 requires libboost_thread-mt.so.1.53.0
iwhd-1.6-4.fc20.i686 requires libboost_system-mt.so.1.53.0
[kawa]
1:kawa-1.11-5.fc19.i686 requires servlet25
[koji]
koji-vm-1.8.0-2.fc20.noarch requires python-virtinst
[kyua-cli]
kyua-cli-0.5-3.fc19.i686 requires liblutok.so.0
kyua-cli-tests-0.5-3.fc19.i686 requires liblutok.so.0
[monotone]
monotone-1.0-11.fc19.i686 requires libbotan-1.8.2.so
perl-Monotone-1.0-11.fc19.i686 requires perl(:MODULE_COMPAT_5.16.2)
[nifti2dicom]
nifti2dicom-0.4.6-3.fc20.i686 requires libvtksys.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkWidgets.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkVolumeRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkViews.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkTextAnalysis.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkRendering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkParallel.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkInfovis.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkImaging.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkIO.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkHybrid.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGraphics.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGeovis.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkGenericFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkFiltering.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCommon.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libvtkCharts.so.5.10
nifti2dicom-0.4.6-3.fc20.i686 requires libQVTK.so.5.10
[nocpulse-common]
nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI)
[openbox]
gdm-control-3.5.2-2.fc20.i686 requires gnome-panel
gnome-panel-control-3.5.2-2.fc20.i686 requires gnome-panel
[osm2pgsql]
osm2pgsql-0.82.0-1.fc20.i686 requires libgeos-3.3.8.so
[oyranos]
oyranos-libs-0.4.0-7.fc19.i686 requires libraw.so.5
[perl-BerkeleyDB]
perl-BerkeleyDB-0.53-1.fc20.i686 requires libdb = 0:5.3.21
[perl-Language-Expr]
perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2)
[perl-MIME-Lite-HTML]
perl-MIME-Lite-HTML-1.24-4.fc18.noarch requires perl(:MODULE_COMPAT_5.16.0)
[perl-PDL]
perl-PDL-2.4.10-6.fc19.i686 requires perl(:MODULE_COMPAT_5.16.2)
perl-PDL-2.4.10-6.fc19.i686 requires libgd.so.2
[perl-PDL-Graphics-PLplot]
perl-PDL-Graphics-PLplot-0.59-3.fc19.i686 requires perl(:MODULE_COMPAT_5.16.1)
[perl-Padre]
perl-Padre-0.90-6.fc18.noarch requires perl(:MODULE_COMPAT_5.16.0)
[python-tag]
python-tag-2013.1-1.fc20.i686 requires libboost_python.so.1.53.0
[rubygem-audited-activerecord]
rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4
[rubygem-fog]
rubygem-fog-1.11.1-1.fc20.noarch requires rubygem(nokogiri) < 0:1.6
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
scala-2.9.2-2.fc19.noarch requires /usr/share/java/jansi.jar
[shrinkwrap-resolver]
shrinkwrap-resolver-1.0.0-0.6.beta7.fc20.noarch requires aether-connector-wagon
[slic3r]
slic3r-0.9.10b-2.fc20.noarch requires perl(:MODULE_COMPAT_5.16.3)
[spacewalk-admin]
spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base
spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert)
[subsurface]
subsurface-3.1.1-2.fc20.i686 requires libosmgpsmap.so.2
[sugar-write]
sugar-write-79-4.fc20.noarch requires pyabiword
[tango]
tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60
[thunderbird-lightning]
thunderbird-lightning-1.9.1-5.fc20.i686 requires thunderbird < 0:18.0
[truezip]
truezip-parent-7.6.6-5.fc20.noarch requires schlichtherle-oss-parent
truezip-parent-7.6.6-5.fc20.noarch requires mvn(de.schlichtherle:oss-parent)
[vfrnav]
vfrnav-20130829-1.fc20.i686 requires libgeos-3.3.8.so
vfrnav-utils-20130829-1.fc20.i686 requires libgeos-3.3.8.so
[wallaby]
ruby-wallaby-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-http-server-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-utils-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
Broken deps for x86_64
----------------------------------------------------------
[blueman]
blueman-1.23-7.fc20.x86_64 requires obex-data-server >= 0:0.4.3
blueman-1.23-7.fc20.x86_64 requires gvfs-obexftp
[bwm-ng]
bwm-ng-0.6-11.1.fc20.x86_64 requires libstatgrab.so.9()(64bit)
[condor-wallaby]
condor-wallaby-client-5.0.3-4.fc20.noarch requires python-qmf >= 0:0.9.1073306
[derelict]
derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-3-20.20130626gite70c293.fc20.x86_64 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.x86_64 requires tcod
[fts]
fts-server-3.1.1-1.fc20.x86_64 requires libactivemq-cpp.so.14()(64bit)
[glpi]
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Version
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Stdlib
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-ServiceManager
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Loader
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-I18n
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Cache-apc
glpi-0.84.2-1.fc20.noarch requires php-ZendFramework2-Cache
[gradle]
gradle-1.0-18.fc20.noarch requires plexus-container-default
[grass]
grass-6.4.3-2.fc20.x86_64 requires libgeos-3.3.8.so()(64bit)
grass-libs-6.4.3-2.fc20.i686 requires libgeos-3.3.8.so
grass-libs-6.4.3-2.fc20.x86_64 requires libgeos-3.3.8.so()(64bit)
[gtkd]
gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60
gtkd-2.0.0-29.20120815git9ae9181.fc18.x86_64 requires libphobos-ldc.so.60()(64bit)
[iwhd]
iwhd-1.6-4.fc20.x86_64 requires libboost_thread-mt.so.1.53.0()(64bit)
iwhd-1.6-4.fc20.x86_64 requires libboost_system-mt.so.1.53.0()(64bit)
[kawa]
1:kawa-1.11-5.fc19.x86_64 requires servlet25
[koji]
koji-vm-1.8.0-2.fc20.noarch requires python-virtinst
[kyua-cli]
kyua-cli-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit)
kyua-cli-tests-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit)
[monotone]
monotone-1.0-11.fc19.x86_64 requires libbotan-1.8.2.so()(64bit)
perl-Monotone-1.0-11.fc19.x86_64 requires perl(:MODULE_COMPAT_5.16.2)
[nifti2dicom]
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtksys.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkWidgets.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkVolumeRendering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkViews.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkTextAnalysis.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkRendering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkParallel.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkInfovis.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkImaging.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkIO.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkHybrid.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGraphics.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGeovis.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkGenericFiltering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkFiltering.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCommon.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libvtkCharts.so.5.10()(64bit)
nifti2dicom-0.4.6-3.fc20.x86_64 requires libQVTK.so.5.10()(64bit)
[nocpulse-common]
nocpulse-common-2.2.7-2.fc20.noarch requires perl(RHN::DBI)
[openbox]
gdm-control-3.5.2-2.fc20.x86_64 requires gnome-panel
gnome-panel-control-3.5.2-2.fc20.x86_64 requires gnome-panel
[osm2pgsql]
osm2pgsql-0.82.0-1.fc20.x86_64 requires libgeos-3.3.8.so()(64bit)
[oyranos]
oyranos-libs-0.4.0-7.fc19.i686 requires libraw.so.5
oyranos-libs-0.4.0-7.fc19.x86_64 requires libraw.so.5()(64bit)
[perl-BerkeleyDB]
perl-BerkeleyDB-0.53-1.fc20.x86_64 requires libdb = 0:5.3.21
[perl-Language-Expr]
perl-Language-Expr-0.19-4.fc19.noarch requires perl(:MODULE_COMPAT_5.16.2)
[perl-MIME-Lite-HTML]
perl-MIME-Lite-HTML-1.24-4.fc18.noarch requires perl(:MODULE_COMPAT_5.16.0)
[perl-PDL]
perl-PDL-2.4.10-6.fc19.x86_64 requires perl(:MODULE_COMPAT_5.16.2)
perl-PDL-2.4.10-6.fc19.x86_64 requires libgd.so.2()(64bit)
[perl-PDL-Graphics-PLplot]
perl-PDL-Graphics-PLplot-0.59-3.fc19.x86_64 requires perl(:MODULE_COMPAT_5.16.1)
[perl-Padre]
perl-Padre-0.90-6.fc18.noarch requires perl(:MODULE_COMPAT_5.16.0)
[python-tag]
python-tag-2013.1-1.fc20.x86_64 requires libboost_python.so.1.53.0()(64bit)
[rubygem-audited-activerecord]
rubygem-audited-activerecord-3.0.0-3.fc19.noarch requires rubygem(activerecord) < 0:4
[rubygem-fog]
rubygem-fog-1.11.1-1.fc20.noarch requires rubygem(nokogiri) < 0:1.6
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
scala-2.9.2-2.fc19.noarch requires /usr/share/java/jansi.jar
[shrinkwrap-resolver]
shrinkwrap-resolver-1.0.0-0.6.beta7.fc20.noarch requires aether-connector-wagon
[slic3r]
slic3r-0.9.10b-2.fc20.noarch requires perl(:MODULE_COMPAT_5.16.3)
[spacewalk-admin]
spacewalk-admin-2.0.1-2.fc20.noarch requires spacewalk-base
spacewalk-admin-2.0.1-2.fc20.noarch requires perl(RHN::SatelliteCert)
[subsurface]
subsurface-3.1.1-2.fc20.x86_64 requires libosmgpsmap.so.2()(64bit)
[sugar-write]
sugar-write-79-4.fc20.noarch requires pyabiword
[tango]
tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60
tango-2-12.20120821git7b92443.fc19.x86_64 requires libphobos-ldc.so.60()(64bit)
[thunderbird-lightning]
thunderbird-lightning-1.9.1-5.fc20.x86_64 requires thunderbird < 0:18.0
[truezip]
truezip-parent-7.6.6-5.fc20.noarch requires schlichtherle-oss-parent
truezip-parent-7.6.6-5.fc20.noarch requires mvn(de.schlichtherle:oss-parent)
[vfrnav]
vfrnav-20130829-1.fc20.x86_64 requires libgeos-3.3.8.so()(64bit)
vfrnav-utils-20130829-1.fc20.x86_64 requires libgeos-3.3.8.so()(64bit)
[wallaby]
ruby-wallaby-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-http-server-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
wallaby-utils-0.16.0-4.fc20.noarch requires ruby-qmf >= 0:0.7.929717
Removed package: gxine-0.5.907-10.fc20
Removed package: xine-plugin-1.0.2-8.fc20
Summary:
Added Packages: 0
Removed Packages: 2
Modified Packages: 0
Size of added packages: 0 (0 )
Size change of modified packages: 0 (0 )
Size of removed packages: 1518228 (1.4 M)
Size change: -1518228 (-1.4 M)
Compose finished at Mon Oct 28 12:03:16 UTC 2013
10 years, 6 months
Re: Ambassadors places in new Working Groups
by Alexandre Moine
2013/10/27, Frank Murphy <frankly3d(a)gmail.com>:
> On Sun, 27 Oct 2013 19:05:37 +0800
> Christopher Meng <cickumqt(a)gmail.com> wrote:
>
>> It seems that most of members from the new formed groups are
>> working for Red Hat. Well it's helpful to strengthen our technical
>> base but are there any plots for other people?
Well, if I believe this ticket [1]: "Each working group should be
comprised of no more than half (rounded up) of Red Hat employees. This
is to avoid the misconception that Red Hat is dictating the planning
here. "
That a good rule.
>>
>> Thanks.
>
> The working groups are about code,
> how it interacts with other code.
>
> Then marketing will be needed to
> spread what has been accepted
> to the world.
>
> What other need do you see?
In my mind, Ambassadors are more near of users than developers or
marketing team. Ambassadors organize all the events, submit new
idea... It is really important to have at least an ambassador in WG
Alexandre
10 years, 6 months
The trouble with metadata-extractor
by Andrea Musuruane
Hi all,
last April the following bug report was opened:
https://bugzilla.redhat.com/show_bug.cgi?id=947457
As I stated on bugzilla, metadata-extractor was just needed by JOSM.
Updating metadata-extractor would break JOSM. Anyway I suggested to
patch JOSM to use a newer version of metadata-extractor if he really
needed it. I had no response at all.
BTW, I am metadata-extractor maintainer, and not JOSM maintainer.
This evening the submitter emailed me privately and I discovered that
meanwhile, a new review request for a newer version of
metadata-extractor was approved and now it is part of Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1004563
As I understand now, newer metadata-extractor is required by Apache
Sorl and Apache Tika, which are not yet part of Fedora.
He asked me to "exchange our repository" "to simplify some build with
maven". And with that I presume that he would like to have his package
called metadata-extractor because he has troubles to build sorl and
tika.
I think all this have been handled very badly. He could have told why
he needed a more recent version of metadata-extractor in the first
place, the reviewer of #1004563 could have checked if the package
followed the naming guidelines and/or have checked if the package was
already in Fedora.
I still think that my original plan (i.e. patching JOSM). was more sensible.
What to do now? What do you think?
If it helps, if it makes things easier, I can release the ownership of
metadata-extractor and someone else can have good care. I just
packaged it because, as an openstreetmap mapper, I longed to have JOSM
in Fedora.
Regards,
Andrea.
10 years, 6 months