Re: F18 users unable to log in due to cached nsswitch.conf
by Simo Sorce
On Wed, 2012-10-17 at 14:31 -0600, Jeff Law wrote:
> On 10/17/2012 02:26 PM, Simo Sorce wrote:
> > On Wed, 2012-10-17 at 14:12 -0600, Jeff Law wrote:
> >> On 10/17/2012 11:07 AM, Simo Sorce wrote:
> >>>
> >>> Personally I do not like the nss_init() calls, it will just make it even
> >>> more difficult to diagnose 'heisenbugs' when some apps start doing it,
> >>> some don't and some other do it at the wrong time.
> >>>
> >>> I would rather have glibc do it automatically with rate limiting.
> >>> Like no more than once every 3 minutes do a stat on one of the getent
> >>> calls and reload if necessary, still this would be thousands of
> >>> unnecessary (vs 0 necessary) stat() calls every day, not the best
> >>> solution.
> >> Rather than polling, why not use inotify?
> >
> > Because you do not want to have one inotify file descriptor open for
> > each and every process in your system, it consumes system resources for
> > no good reason.
> Certainly wouldn't have one for each and every process, they'd be lazily
> set up. However, even with lazy setup, we're probably still burning too
> many fds.
Given that a truckload of libraries touch the nsswitch interface it
would still be most processes IMO.
Simo.
--
Simo Sorce * Red Hat, Inc * New York
11 years, 6 months
Re: F18 users unable to log in due to cached nsswitch.conf
by Simo Sorce
On Wed, 2012-10-17 at 14:12 -0600, Jeff Law wrote:
> On 10/17/2012 11:07 AM, Simo Sorce wrote:
> >
> > Personally I do not like the nss_init() calls, it will just make it even
> > more difficult to diagnose 'heisenbugs' when some apps start doing it,
> > some don't and some other do it at the wrong time.
> >
> > I would rather have glibc do it automatically with rate limiting.
> > Like no more than once every 3 minutes do a stat on one of the getent
> > calls and reload if necessary, still this would be thousands of
> > unnecessary (vs 0 necessary) stat() calls every day, not the best
> > solution.
> Rather than polling, why not use inotify?
Because you do not want to have one inotify file descriptor open for
each and every process in your system, it consumes system resources for
no good reason.
> However, this really needs to be taken upstream (libc-alpha). I'm not
> in a position to champion this kind of change.
True,
but I haven;t done anything so far because I can't see a good solution.
It's the same problem we have with resolv.conf, there too I think the
solution is not res_init() but to have a default dns caching daemon, and
have resolv.conf permanently welded to 127.0.0.1, but that's just me.
Simo.
--
Simo Sorce * Red Hat, Inc * New York
11 years, 6 months
Debugging Fedora UEFI boot problems on Intel DQ77MK
by Pasi Kärkkäinen
Hello,
I hope someone here can help me out..
I have a new Intel DQ77MK motherboard, based on the Intel Q77 chipset.
CPU is Intel Ivy Bridge i7-3770.
I'm running the latest BIOS version (0048), and UEFI boot is enabled in the BIOS.
I've tried UEFI booting the following operating systems from burned DVDR discs:
- Fedora 16 x64 DVD.
- Fedora 17 x64 DVD.
- Redhat Enterprise Linux (RHEL) 6.3 Server DVD. (Redhat Linux is supposed to be UEFI supported per the motherboard manuals).
UEFI boot fails with all of the listed operating systems. Symptoms:
- I get the Fedora/RHEL EFI boot menu, and I let it boot with the default options.
- I get text on the screen about allocating memory pages for Linux-EFI, loading VMLINUZ, etc.
- The screen goes empty/black, there's only a cursor blinking, and nothing happens..
- The boot failed or is stuck with nothing happening. I need to reset the box.
It looks like Linux kernel doesn't get started at all.. so it could be a UEFI firmware or a bootloader problem.
I'm actually expecting this is an Intel BIOS/UEFI firmware bug,
because I've seen reports about UEFI boot problems on other Intel 7-series chipset aswell.
Does anyone know how to debug/troubleshoot UEFI boot problems?
The motherboard in question has Intel vPro/AMT, so it has SOL, so I could use a serial console,
if there's a way to use it with UEFI/bootloader before Linux is started..
Any help is welcome!
Thanks,
-- Pasi
11 years, 6 months
Please review your packages against the list of services started by default
by Miloslav Trmač
Hello all,
On Wed, Oct 17, 2012 at 7:40 PM, Miloslav Trmač <mitr(a)volny.cz> wrote:
> * #950 Cleanup of the default enabled services list (mitr, 17:11:50)
> * AGREED: Will revisit when there is a list of specific changes
> (mitr, 17:17:30)
Please review https://fedoraproject.org/wiki/Starting_services_by_default
and how it applies to your packages:
* If your package starts by default, is it allowed by the policy? If
not, should it be added as an exception?
* If your package currently has an exception, is it still starting by
default? If not, should the exception be removed?
In either case, please note the suggested policy change at
https://fedorahosted.org/fesco/ticket/950 .
Note that the first two paragraphs of the wiki page give general
approval to starting certain kinds of services by default; it is not
necessary to have a specific exception if your package matches the
general approval criteria.
Thank you,
Mirek
11 years, 6 months
Summary/Minutes for today's FESCo meeting (2012-10-17)
by Miloslav Trmač
===================================
#fedora-meeting: FESCO (2012-10-17)
===================================
Meeting started by mitr at 17:00:50 UTC. The full logs are available at
http://meetbot.fedoraproject.org/fedora-meeting/2012-10-17/fesco.2012-10-...
.
Meeting summary
---------------
* init process (mitr, 17:00:57)
* #932 F18 Features - progress at Feature Freeze (mitr, 17:06:14)
* #946 Fedora 18 Beta freeze readiness: is major functionality in place?
(mitr, 17:08:52)
* #950 Cleanup of the default enabled services list (mitr, 17:11:50)
* AGREED: Will revisit when there is a list of specific changes
(mitr, 17:17:30)
* #958 Exception for updating ecj across major version boundary in f17
(mitr, 17:17:45)
* AGREED: ecj major update in F17 is OK (+7) (mitr, 17:20:47)
* #959 Mediation needed for cobbler in EPEL (mitr, 17:20:55)
* AGREED: : Please ask epel-devel for a decision, and reopen a ticket
if that doesn't lead to a resolution (+5) (mitr, 17:33:02)
* Next week's chair (mitr, 17:33:09)
* limburgher will chair the Oct 24 meeting (mitr, 17:34:47)
* Open Floor (mitr, 17:34:52)
Meeting ended at 17:38:21 UTC.
Action Items
------------
Action Items, by person
-----------------------
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* mitr (48)
* nirik (35)
* limburgher (17)
* t8m (10)
* notting (10)
* mmaslano (9)
* zodbot (9)
* vanaltj (8)
* abadger1999 (6)
* pjones (3)
* mjg59 (0)
* jwb (0)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
11 years, 6 months
Fedora ARM weekly status meeting 2012-10-17
by Paul Whalen
Good day all,
This weeks Fedora ARM status meeting will take place today (Wednesday Oct 10th) in #fedora-meeting-1 on Freenode.
Times in various time zones (please let us know if these do not work):
PDT: 1pm
MDT: 2pm
CDT: 3pm
EDT: 4pm
UTC: 8pm
BST: 9pm
CST: 10pm
Current items on the agenda:
1) F18/19 build status - problem packages?
2) Fedora 18 ARM TC1 VFAD - results summary
3) F18 ARM Alpha release
4) Your topic here
If you have any other items you would like to discuss that are not mentioned, please feel free to send an email to the list or bring it up at the end of the meeting.
Paul
11 years, 6 months
F17: Illuminated keyboard turns off with kernel 3.6.1 upgrade
by Gerry Reno
I just upgraded my F17 kernel to 3.6.1 and when I reboot then my Logitech illuminated keyboard is not lit until I touch
a key and then it goes right back off.
Kind of defeats the purpose of having an illuminated keyboard.
Anyone know why this might happen after this particular kernel upgrade?
11 years, 6 months
rawhide report: 20121017 changes
by Fedora compose checker
Compose started at Wed Oct 17 08:15:06 UTC 2012
Broken deps for x86_64
----------------------------------------------------------
[LabPlot]
LabPlot-1.6.0.2-12.fc18.i686 requires libaudiofile.so.0
LabPlot-1.6.0.2-12.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[PackageKit]
PackageKit-yum-0.8.4-4.fc19.x86_64 requires yum >= 0:3.4.3-45
[PyKDE]
PyKDE-3.16.6-10.fc18.x86_64 requires sip-api(8) >= 0:8.1
[PyQt]
PyQt-3.18.1-12.fc18.x86_64 requires sip-api(8) >= 0:8.1
[alt-ergo]
alt-ergo-0.94-6.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[apron]
ocaml-apron-0.9.10-8.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-apron-0.9.10-8.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[banshee-community-extensions]
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Lastfm) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Hyena.Gui) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Hyena.Data.Sqlite) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Hyena) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Banshee.Widgets) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Banshee.WebBrowser) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Banshee.ThickClient) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Banshee.Services) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.x86_64 requires mono(Banshee.Core) = 0:2.4.0.0
[brltty]
ocaml-brlapi-0.5.6-7.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[cduce]
cduce-0.5.5-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[coccinelle]
coccinelle-1.0.0-0.rc14.5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[coq]
coq-8.4-1.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
coq-coqide-8.4-1.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
coq-coqide-8.4-1.fc19.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[dragonegg]
dragonegg-3.1-13.fc19.x86_64 requires gcc = 0:4.7.2-4.fc19
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.x86_64 requires libphobos-ldc.so.59()(64bit)
[dvipdfm]
dvipdfm-0.13.2d-44.fc18.x86_64 requires libkpathsea.so.4()(64bit)
[dvipdfmx]
dvipdfmx-0-0.35.20090708cvs.fc18.x86_64 requires libkpathsea.so.4()(64bit)
[dvipng]
dvipng-1.14-4.fc18.x86_64 requires libkpathsea.so.4()(64bit)
[dvisvgm]
dvisvgm-1.0.12-1.fc19.x86_64 requires libkpathsea.so.4()(64bit)
[e16]
e16-1.0.10-3.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[esound]
1:esound-libs-0.2.41-6.fc18.i686 requires libaudiofile.so.0
1:esound-libs-0.2.41-6.fc18.x86_64 requires libaudiofile.so.0()(64bit)
1:esound-tools-0.2.41-6.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[evolution-exchange]
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedataserverui-3.0.so.3()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedataserver-1.2.so.16()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedata-cal-1.2.so.17()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libedata-book-1.2.so.14()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libecal-1.2.so.12()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libebook-1.2.so.13()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libebackend-1.2.so.3()(64bit)
evolution-exchange-3.5.2-1.fc18.x86_64 requires libcamel-1.2.so.36()(64bit)
[flush]
flush-0.9.10-7.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
flush-0.9.10-7.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
flush-0.9.10-7.fc18.x86_64 requires libboost_signals-mt.so.1.48.0()(64bit)
flush-0.9.10-7.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[frama-c]
frama-c-1.7-9.fc19.i686 requires ocaml(runtime) = 0:4.00.0
frama-c-1.7-9.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
frama-c-devel-1.7-9.fc19.i686 requires ocaml(runtime) = 0:4.00.0
frama-c-devel-1.7-9.fc19.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
frama-c-devel-1.7-9.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
frama-c-devel-1.7-9.fc19.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[func]
func-0.28-1.fc17.noarch requires smolt
[gappalib-coq]
gappalib-coq-0.18.0-4.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
gcc-python2-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
gcc-python3-debug-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
gcc-python3-plugin-0.9-4.fc19.x86_64 requires gcc = 0:4.7.1-7.fc19
[gcstar]
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Table)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::HBox)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Frame)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::EventBox)
[gdb-heap]
gdb-heap-0.5-9.fc18.x86_64 requires glibc(x86-64) = 0:2.15
[ghc-ghc-mtl]
ghc-ghc-mtl-1.0.1.1-2.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-ghc-mtl-devel-1.0.1.1-2.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[ghc-ltk]
ghc-ltk-0.12.1.0-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-ltk-devel-0.12.1.0-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[glom]
glom-1.18.6-1.fc17.x86_64 requires libboost_python.so.1.48.0()(64bit)
glom-libs-1.18.6-1.fc17.i686 requires libboost_python.so.1.48.0
glom-libs-1.18.6-1.fc17.x86_64 requires libboost_python.so.1.48.0()(64bit)
[gnome-do-plugins]
gnome-do-plugins-banshee-0.8.4-10.fc18.x86_64 requires mono(Banshee.CollectionIndexer) = 0:2.4.0.0
[gnome-libs]
1:gnome-libs-1.4.2-21.fc18.i686 requires libaudiofile.so.0
1:gnome-libs-1.4.2-21.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[gnome-pilot]
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libedataserverui-3.0.so.1()(64bit)
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libedataserver-1.2.so.16()(64bit)
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libecal-1.2.so.11()(64bit)
gnome-pilot-eds-2.91.93-5.fc17.x86_64 requires libebook-1.2.so.13()(64bit)
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc19.noarch requires gnome-shell-extensions-user-theme
[gnuplot]
gnuplot-latex-4.6.0-2.fc18.noarch requires texlive-texmf-xetex
[graphviz]
graphviz-ocaml-2.28.0-23.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[gwibber]
1:gwibber-3.4.2-3.fc18.i686 requires libgee-0.8.so.0
1:gwibber-3.4.2-3.fc18.x86_64 requires libgee-0.8.so.0()(64bit)
[haddock]
ghc-haddock-2.10.0-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-haddock-devel-2.10.0-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
haddock-2.10.0-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[hivex]
ocaml-hivex-1.3.7-1.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[js-of-ocaml]
js-of-ocaml-1.0.9-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[kamoso]
kamoso-2.0.2-6.fc18.x86_64 requires libkipi.so.9()(64bit)
[kphotoalbum]
kphotoalbum-4.2-4.fc18.x86_64 requires libkipi.so.9()(64bit)
kphotoalbum-4.2-4.fc18.x86_64 requires libkdcraw.so.21()(64bit)
[leksah]
ghc-leksah-0.12.1.3-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-leksah-devel-0.12.1.3-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
leksah-0.12.1.3-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[leksah-server]
ghc-leksah-server-0.12.1.2-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-leksah-server-devel-0.12.1.2-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
leksah-server-0.12.1.2-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
1:libsyncml-0.4.6-4.fc17.x86_64 requires libsoup-2.2.so.8()(64bit)
[llvm]
llvm-ocaml-3.1-11.fc19.i686 requires ocaml(runtime) = 0:4.00.0
llvm-ocaml-3.1-11.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.x86_64 requires httpd-mmn = 0:20051115-x86-64
[ocaml-SDL]
ocaml-SDL-0.8.0-6.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-ancient]
ocaml-ancient-0.9.0-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-augeas]
ocaml-augeas-0.5-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-bin-prot]
ocaml-bin-prot-2.0.9-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-bisect]
ocaml-bisect-1.1-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-bitstring]
ocaml-bitstring-2.0.3-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-cairo]
1:ocaml-cairo-1.2.0-0.7.git08b40192975.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-calendar]
ocaml-calendar-2.03.1-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-camlidl]
ocaml-camlidl-1.05-16.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-camlimages]
ocaml-camlimages-4.0.1-6.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-camlimages-4.0.1-6.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-camlp5]
ocaml-camlp5-6.06-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-camomile]
ocaml-camomile-0.8.3-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-cil]
ocaml-cil-1.4.0-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-cryptokit]
ocaml-cryptokit-1.6-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-csv]
ocaml-csv-1.1.7-12.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-curl]
ocaml-curl-0.5.3-6.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-curses]
ocaml-curses-1.0.3-13.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-dbus]
ocaml-dbus-0.29-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-deriving]
ocaml-deriving-0.1.1a-16.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-expat]
ocaml-expat-0.9.1-23.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-extlib]
ocaml-extlib-1.5.2-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-facile]
ocaml-facile-1.1-18.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-fileutils]
ocaml-fileutils-0.4.0-10.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-gettext]
ocaml-gettext-0.3.4-6.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-gettext-camomile-0.3.4-6.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-gsl]
ocaml-gsl-0.6.0-15.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-static]
ocaml-json-static-0.9.8-7.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-json-static-0.9.8-7.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-wheel]
ocaml-json-wheel-1.0.6-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-lablgl]
ocaml-lablgl-20120306-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgl-20120306-3.fc18.x86_64 requires ocaml(Tk) = 0:bda20e4b76674d01a02b252d6f4c2fa7
ocaml-lablgl-20120306-3.fc18.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-lablgtk]
ocaml-lablgtk-2.14.2-12.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgtk-2.14.2-12.fc18.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
ocaml-lablgtk-devel-2.14.2-12.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgtk-devel-2.14.2-12.fc18.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
ocaml-lablgtk-devel-2.14.2-12.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgtk-devel-2.14.2-12.fc18.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-lacaml]
ocaml-lacaml-5.5.2-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-libvirt]
ocaml-libvirt-0.6.1.2-5.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-lwt]
ocaml-lwt-2.3.2-7.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-menhir]
ocaml-menhir-devel-20120123-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-menhir-devel-20120123-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-mikmatch]
ocaml-mikmatch-1.0.4-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-mlgmpidl]
ocaml-mlgmpidl-1.2-0.5.20120508.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-mysql]
ocaml-mysql-1.1.0-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-mysql-1.1.0-3.fc18.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-newt]
ocaml-newt-0.9-13.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-ocamlgraph]
ocaml-ocamlgraph-1.8.2-1.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-ocamlnet]
ocaml-ocamlnet-3.5.1-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-ocamlnet-nethttpd-3.5.1-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-openin]
ocaml-openin-20070524-15.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-ounit]
ocaml-ounit-1.1.2-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-p3l]
ocaml-p3l-2.03-11.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-pa-do]
ocaml-pa-do-0.8.13-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-pa-monad]
ocaml-pa-monad-6.0-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-pcre]
ocaml-pcre-6.2.5-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-perl4caml]
ocaml-perl4caml-0.9.5-22.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-pgocaml]
ocaml-pgocaml-1.5-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-postgresql]
ocaml-postgresql-1.18.0-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-preludeml]
ocaml-preludeml-0.1-0.21.20100314.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-pxp]
ocaml-pxp-1.2.3-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-react]
ocaml-react-0.9.2-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-reins]
ocaml-reins-0.1a-13.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-res]
ocaml-res-3.2.0-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-sexplib]
ocaml-sexplib-7.0.5-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-sexplib-7.0.5-3.fc18.x86_64 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-sqlite]
ocaml-sqlite-1.6.3-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-ssl]
ocaml-ssl-0.4.6-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-type-conv]
ocaml-type-conv-3.0.5-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-ulex]
ocaml-ulex-1.1-14.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-xml-light]
ocaml-xml-light-2.3-0.1.svn234.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-xmlrpc-light]
ocaml-xmlrpc-light-0.6.1-10.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-zip]
ocaml-zip-1.04-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[php-pecl-gearman]
php-pecl-gearman-1.0.2-1.fc18.x86_64 requires libgearman.so.6()(64bit)
[plplot]
plplot-ocaml-5.9.9-10.svn12202.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ppl]
ppl-swiprolog-0.11.2-10.fc18.x86_64 requires libswipl.so.6.0.2()(64bit)
[pyexiv2]
pyexiv2-0.3.2-4.fc18.x86_64 requires libboost_python.so.1.48.0()(64bit)
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[python-webob1.2]
python3-webob1.2-1.2.1-4.fc17.noarch requires python(abi) = 0:3.2
[qemu]
2:qemu-system-ppc-1.2.0-13.fc19.x86_64 requires SLOF = 0:0-0.1.git20120731.fc19
[reciteword]
reciteword-0.8.4-10.fc18.x86_64 requires esound
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libedataserver-1.2.so.16()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libecal-1.2.so.12()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libebook-1.2.so.13()(64bit)
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.x86_64 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.x86_64 requires libruby.so.1.8()(64bit)
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires libruby.so.1.8()(64bit)
[sgabios]
1:sgabios-0.20110622svn-1.fc19.x86_64 requires sgabios-bin = 0:0.20110622svn-1.fc19
[spacechart]
spacechart-0.9.5-8.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[tetex-tex4ht]
tetex-tex4ht-1.0.2008_09_16_1413-10.fc18.x86_64 requires libkpathsea.so.4()(64bit)
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[vigra]
vigra-python-1.8.0-5.fc18.x86_64 requires libboost_python-mt.so.1.48.0()(64bit)
[whenjobs]
whenjobs-0.7.3-3.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[why]
why-jessie-2.31-3.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[wine]
wine-1.5.15-1.fc19.i686 requires mingw32-wine-gecko = 0:1.8
wine-1.5.15-1.fc19.x86_64 requires mingw64-wine-gecko = 0:1.8
wine-1.5.15-1.fc19.x86_64 requires mingw32-wine-gecko = 0:1.8
[xdvik]
xdvik-22.84.14-12.fc18.x86_64 requires libkpathsea.so.4()(64bit)
[xdvipdfmx]
xdvipdfmx-0.4-9.fc18.x86_64 requires libkpathsea.so.4()(64bit)
[xen]
xen-ocaml-4.1.3-4.fc19.x86_64 requires ocaml(runtime) = 0:4.00.0
[xlockmore]
xlockmore-5.38-2.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[znc-infobot]
znc-infobot-0.206-2.fc18.x86_64 requires znc = 0:0.206
Broken deps for i386
----------------------------------------------------------
[LabPlot]
LabPlot-1.6.0.2-12.fc18.i686 requires libaudiofile.so.0
[PackageKit]
PackageKit-yum-0.8.4-4.fc19.i686 requires yum >= 0:3.4.3-45
[PyKDE]
PyKDE-3.16.6-10.fc18.i686 requires sip-api(8) >= 0:8.1
[PyQt]
PyQt-3.18.1-12.fc18.i686 requires sip-api(8) >= 0:8.1
[alt-ergo]
alt-ergo-0.94-6.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[apron]
ocaml-apron-0.9.10-8.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[banshee-community-extensions]
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Lastfm) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Hyena.Gui) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Hyena.Data.Sqlite) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Hyena) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Banshee.Widgets) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Banshee.WebBrowser) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Banshee.ThickClient) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Banshee.Services) = 0:2.4.0.0
banshee-community-extensions-2.4.0-3.fc19.i686 requires mono(Banshee.Core) = 0:2.4.0.0
[brltty]
ocaml-brlapi-0.5.6-7.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[cduce]
cduce-0.5.5-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[coccinelle]
coccinelle-1.0.0-0.rc14.5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[coq]
coq-8.4-1.fc19.i686 requires ocaml(runtime) = 0:4.00.0
coq-coqide-8.4-1.fc19.i686 requires ocaml(runtime) = 0:4.00.0
coq-coqide-8.4-1.fc19.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[dragonegg]
dragonegg-3.1-13.fc19.i686 requires gcc = 0:4.7.2-4.fc19
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.i686 requires libphobos-ldc.so.59
[dvipdfm]
dvipdfm-0.13.2d-44.fc18.i686 requires libkpathsea.so.4
[dvipdfmx]
dvipdfmx-0-0.35.20090708cvs.fc18.i686 requires libkpathsea.so.4
[dvipng]
dvipng-1.14-4.fc18.i686 requires libkpathsea.so.4
[dvisvgm]
dvisvgm-1.0.12-1.fc19.i686 requires libkpathsea.so.4
[e16]
e16-1.0.10-3.fc18.i686 requires libaudiofile.so.0
[esound]
1:esound-libs-0.2.41-6.fc18.i686 requires libaudiofile.so.0
1:esound-tools-0.2.41-6.fc18.i686 requires libaudiofile.so.0
[evolution-exchange]
evolution-exchange-3.5.2-1.fc18.i686 requires libedataserverui-3.0.so.3
evolution-exchange-3.5.2-1.fc18.i686 requires libedataserver-1.2.so.16
evolution-exchange-3.5.2-1.fc18.i686 requires libedata-cal-1.2.so.17
evolution-exchange-3.5.2-1.fc18.i686 requires libedata-book-1.2.so.14
evolution-exchange-3.5.2-1.fc18.i686 requires libecal-1.2.so.12
evolution-exchange-3.5.2-1.fc18.i686 requires libebook-1.2.so.13
evolution-exchange-3.5.2-1.fc18.i686 requires libebackend-1.2.so.3
evolution-exchange-3.5.2-1.fc18.i686 requires libcamel-1.2.so.36
[flush]
flush-0.9.10-7.fc18.i686 requires libboost_thread-mt.so.1.48.0
flush-0.9.10-7.fc18.i686 requires libboost_system-mt.so.1.48.0
flush-0.9.10-7.fc18.i686 requires libboost_signals-mt.so.1.48.0
flush-0.9.10-7.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[frama-c]
frama-c-1.7-9.fc19.i686 requires ocaml(runtime) = 0:4.00.0
frama-c-devel-1.7-9.fc19.i686 requires ocaml(runtime) = 0:4.00.0
frama-c-devel-1.7-9.fc19.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[func]
func-0.28-1.fc17.noarch requires smolt
[gappalib-coq]
gappalib-coq-0.18.0-4.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
gcc-python2-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
gcc-python3-debug-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
gcc-python3-plugin-0.9-4.fc19.i686 requires gcc = 0:4.7.1-7.fc19
[gcstar]
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Table)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::HBox)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Frame)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::EventBox)
[gdb-heap]
gdb-heap-0.5-9.fc18.i686 requires glibc(x86-32) = 0:2.15
[ghc-ghc-mtl]
ghc-ghc-mtl-1.0.1.1-2.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-ghc-mtl-devel-1.0.1.1-2.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[ghc-ltk]
ghc-ltk-0.12.1.0-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-ltk-devel-0.12.1.0-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[glom]
glom-1.18.6-1.fc17.i686 requires libboost_python.so.1.48.0
glom-libs-1.18.6-1.fc17.i686 requires libboost_python.so.1.48.0
[gnome-do-plugins]
gnome-do-plugins-banshee-0.8.4-10.fc18.i686 requires mono(Banshee.CollectionIndexer) = 0:2.4.0.0
[gnome-libs]
1:gnome-libs-1.4.2-21.fc18.i686 requires libaudiofile.so.0
[gnome-pilot]
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libedataserverui-3.0.so.1
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libedataserver-1.2.so.16
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libecal-1.2.so.11
gnome-pilot-eds-2.91.93-5.fc17.i686 requires libebook-1.2.so.13
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc19.noarch requires gnome-shell-extensions-user-theme
[gnuplot]
gnuplot-latex-4.6.0-2.fc18.noarch requires texlive-texmf-xetex
[graphviz]
graphviz-ocaml-2.28.0-23.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[gwibber]
1:gwibber-3.4.2-3.fc18.i686 requires libgee-0.8.so.0
[haddock]
ghc-haddock-2.10.0-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-haddock-devel-2.10.0-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
haddock-2.10.0-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[hivex]
ocaml-hivex-1.3.7-1.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[js-of-ocaml]
js-of-ocaml-1.0.9-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[kamoso]
kamoso-2.0.2-6.fc18.i686 requires libkipi.so.9
[kphotoalbum]
kphotoalbum-4.2-4.fc18.i686 requires libkipi.so.9
kphotoalbum-4.2-4.fc18.i686 requires libkdcraw.so.21
[leksah]
ghc-leksah-0.12.1.3-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-leksah-devel-0.12.1.3-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
leksah-0.12.1.3-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[leksah-server]
ghc-leksah-server-0.12.1.2-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-leksah-server-devel-0.12.1.2-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
leksah-server-0.12.1.2-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
[llvm]
llvm-ocaml-3.1-11.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.i686 requires httpd-mmn = 0:20051115-x86-32
[ocaml-SDL]
ocaml-SDL-0.8.0-6.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-ancient]
ocaml-ancient-0.9.0-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-augeas]
ocaml-augeas-0.5-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-bin-prot]
ocaml-bin-prot-2.0.9-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-bisect]
ocaml-bisect-1.1-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-bitstring]
ocaml-bitstring-2.0.3-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-cairo]
1:ocaml-cairo-1.2.0-0.7.git08b40192975.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-calendar]
ocaml-calendar-2.03.1-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-camlidl]
ocaml-camlidl-1.05-16.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-camlimages]
ocaml-camlimages-4.0.1-6.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-camlp5]
ocaml-camlp5-6.06-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-camomile]
ocaml-camomile-0.8.3-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-cil]
ocaml-cil-1.4.0-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-cryptokit]
ocaml-cryptokit-1.6-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-csv]
ocaml-csv-1.1.7-12.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-curl]
ocaml-curl-0.5.3-6.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-curses]
ocaml-curses-1.0.3-13.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-dbus]
ocaml-dbus-0.29-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-deriving]
ocaml-deriving-0.1.1a-16.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-expat]
ocaml-expat-0.9.1-23.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-extlib]
ocaml-extlib-1.5.2-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-facile]
ocaml-facile-1.1-18.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-fileutils]
ocaml-fileutils-0.4.0-10.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-gettext]
ocaml-gettext-0.3.4-6.fc19.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-gettext-camomile-0.3.4-6.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-gsl]
ocaml-gsl-0.6.0-15.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-static]
ocaml-json-static-0.9.8-7.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-wheel]
ocaml-json-wheel-1.0.6-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-lablgl]
ocaml-lablgl-20120306-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgl-20120306-3.fc18.i686 requires ocaml(Tk) = 0:bda20e4b76674d01a02b252d6f4c2fa7
ocaml-lablgl-20120306-3.fc18.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-lablgtk]
ocaml-lablgtk-2.14.2-12.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgtk-2.14.2-12.fc18.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
ocaml-lablgtk-devel-2.14.2-12.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-lablgtk-devel-2.14.2-12.fc18.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-lacaml]
ocaml-lacaml-5.5.2-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-libvirt]
ocaml-libvirt-0.6.1.2-5.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-lwt]
ocaml-lwt-2.3.2-7.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-menhir]
ocaml-menhir-devel-20120123-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-mikmatch]
ocaml-mikmatch-1.0.4-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-mlgmpidl]
ocaml-mlgmpidl-1.2-0.5.20120508.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-mysql]
ocaml-mysql-1.1.0-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-mysql-1.1.0-3.fc18.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-newt]
ocaml-newt-0.9-13.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-ocamlgraph]
ocaml-ocamlgraph-1.8.2-1.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-ocamlnet]
ocaml-ocamlnet-3.5.1-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-ocamlnet-nethttpd-3.5.1-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-openin]
ocaml-openin-20070524-15.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-ounit]
ocaml-ounit-1.1.2-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-p3l]
ocaml-p3l-2.03-11.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-pa-do]
ocaml-pa-do-0.8.13-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-pa-monad]
ocaml-pa-monad-6.0-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-pcre]
ocaml-pcre-6.2.5-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-perl4caml]
ocaml-perl4caml-0.9.5-22.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-pgocaml]
ocaml-pgocaml-1.5-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-postgresql]
ocaml-postgresql-1.18.0-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-preludeml]
ocaml-preludeml-0.1-0.21.20100314.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-pxp]
ocaml-pxp-1.2.3-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-react]
ocaml-react-0.9.2-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-reins]
ocaml-reins-0.1a-13.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-res]
ocaml-res-3.2.0-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-sexplib]
ocaml-sexplib-7.0.5-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-sexplib-7.0.5-3.fc18.i686 requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635
[ocaml-sqlite]
ocaml-sqlite-1.6.3-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-ssl]
ocaml-ssl-0.4.6-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-type-conv]
ocaml-type-conv-3.0.5-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-ulex]
ocaml-ulex-1.1-14.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-xml-light]
ocaml-xml-light-2.3-0.1.svn234.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-xmlrpc-light]
ocaml-xmlrpc-light-0.6.1-10.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-zip]
ocaml-zip-1.04-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires libsal_textenc.so
[php-pecl-gearman]
php-pecl-gearman-1.0.2-1.fc18.i686 requires libgearman.so.6
[plplot]
plplot-ocaml-5.9.9-10.svn12202.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ppl]
ppl-swiprolog-0.11.2-10.fc18.i686 requires libswipl.so.6.0.2
[pyexiv2]
pyexiv2-0.3.2-4.fc18.i686 requires libboost_python.so.1.48.0
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[python-webob1.2]
python3-webob1.2-1.2.1-4.fc17.noarch requires python(abi) = 0:3.2
[qemu]
2:qemu-system-ppc-1.2.0-13.fc19.i686 requires SLOF = 0:0-0.1.git20120731.fc19
[reciteword]
reciteword-0.8.4-10.fc18.i686 requires esound
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libedataserver-1.2.so.16
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libecal-1.2.so.12
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libebook-1.2.so.13
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.i686 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.i686 requires libruby.so.1.8
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires libruby.so.1.8
[sgabios]
1:sgabios-0.20110622svn-1.fc19.i686 requires sgabios-bin = 0:0.20110622svn-1.fc19
[spacechart]
spacechart-0.9.5-8.fc18.i686 requires libaudiofile.so.0
[tetex-tex4ht]
tetex-tex4ht-1.0.2008_09_16_1413-10.fc18.i686 requires libkpathsea.so.4
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[vigra]
vigra-python-1.8.0-5.fc18.i686 requires libboost_python-mt.so.1.48.0
[whenjobs]
whenjobs-0.7.3-3.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[why]
why-jessie-2.31-3.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[wine]
wine-1.5.15-1.fc19.i686 requires mingw32-wine-gecko = 0:1.8
[xdvik]
xdvik-22.84.14-12.fc18.i686 requires libkpathsea.so.4
[xdvipdfmx]
xdvipdfmx-0.4-9.fc18.i686 requires libkpathsea.so.4
[xen]
xen-ocaml-4.1.3-4.fc19.i686 requires ocaml(runtime) = 0:4.00.0
[xlockmore]
xlockmore-5.38-2.fc18.i686 requires libaudiofile.so.0
[znc-infobot]
znc-infobot-0.206-2.fc18.i686 requires znc = 0:0.206
New package: ctstream-6-2.fc19
Get URLs of Czech Television video streams
New package: kde-plasma-akonadi-tasks-0.1.3-1.fc19
Tasks plasmoid for Akonadi resources
New package: leiningen-1.7.1-4.fc19
Clojure project automation tool
New package: libkdtree++-0.7.0-4.fc19
C++ template container implementation of kd-tree sorting
New package: obnam-1.2-1.fc19
An easy, secure backup program
New package: openshift-origin-port-proxy-0.3.3-2.fc19
Script to configure HAProxy to do port forwarding for OpenShift Origin
New package: rubygem-taskjuggler-3.3.0-2.fc19
A Project Management Software
New package: wxsqlite3-3.0.0.1-6.fc19
C++ wrapper around the SQLite 3.x database
Updated Packages:
MySQL-zrm-2.2.0-11.fc19
-----------------------
* Tue Oct 16 2012 Orion Poplawski <orion(a)cora.nwra.com> - 2.2.0-11
- Use new systemd macros (bug 850223)
SLOF-0.1.git20120731-1.fc19
---------------------------
* Tue Oct 16 2012 Paolo Bonzini <pbonzini(a)redhat.com> - 0.1.git20120731-1
- Move date from release to version.
akonadi-1.8.1-1.fc19
--------------------
* Tue Oct 16 2012 Rex Dieter <rdieter(a)fedoraproject.org> 1.8.1-1
- 1.8.1
* Sat Oct 13 2012 Rex Dieter <rdieter(a)fedoraproject.org> 1.8.0-3
- include a couple upstream patches
banshee-2.6.0-1.fc18
--------------------
* Thu Oct 11 2012 Kalev Lember <kalevlember(a)gmail.com> - 2.6.0-1
- Update to 2.6.0
colordiff-1.0.12-1.fc19
-----------------------
* Tue Oct 16 2012 Ville Skyttä <ville.skytta(a)iki.fi> - 1.0.12-1
- Update to 1.0.12.
cross-gcc-4.7.1-0.1.20120606.fc19.2
-----------------------------------
* Mon Oct 15 2012 Jon Ciesla <limburgher(a)gmail.com> - 4.7.1-0.1.20120606.2
- Provides: bundled(libiberty)
cryptsetup-1.5.1-1.fc19
-----------------------
* Tue Oct 16 2012 Milan Broz <mbroz(a)redhat.com> - 1.5.1-1
- Update to cryptsetup 1.5.1.
drupal7-date-2.6-3.fc19
-----------------------
* Sat Oct 27 2012 Jared Smith <jsmith(a)fedoraproject.org> - 2.6-3
- Update to upstream release 2.6
eclipse-jbosstools-4.0.0-0.2.fc19
---------------------------------
* Tue Oct 16 2012 Gerard Ryan <galileo(a)fedoraproject.org> - 4.0.0-0.2
- Update to tag jbosstools-4.0.0.Alpha2.
- Add subpackage runtime, necessary for 'as' subpackage.
- Shorten summary line.
- Rebase patches 14, 15, 16, 21, 23; append -4.0.0 to patch name.
- Remove patches 13, 20.
- Remove dependency on jbossxb.
* Mon Oct 08 2012 Gerard Ryan <galileo(a)fedoraproject.org> - 3.3.1-5
- Build as a noarch package.
ettercap-0.7.5-2.fc19.1.20120906gitc796e5
-----------------------------------------
* Tue Oct 16 2012 Jon Ciesla <limburgher(a)gmail.com> - 0.7.5-2.1.20120906gitc796e5
- Fix DHCP spoofing in gtk interface, BZ 867075.
finger-0.17-46.fc19
-------------------
* Tue Oct 16 2012 Tomas Hozza <thozza(a)redhat.com> - 0.17-46
- finger segfaults if pw->pw_gecos is NULL (#866873)
g2clib-1.4.0-1.fc19
-------------------
* Tue Oct 16 2012 Orion Poplawski <orion(a)cora.nwra.com> - 1.4.0-1
- Update to 1.4.0
- Rebase templates patch
gdb-7.5.0.20120926-25.fc18
--------------------------
* Fri Oct 05 2012 Jan Kratochvil <jan.kratochvil(a)redhat.com> - 7.5.0.20120926-25.fc18
- entry values: Fix resolving in inlined frames.
* Thu Sep 27 2012 Jan Kratochvil <jan.kratochvil(a)redhat.com> - 7.5.0.20120926-24.fc18
- Permit passing pointers as address number even for C++ methods (Keith Seitz).
* Thu Sep 27 2012 Jan Kratochvil <jan.kratochvil(a)redhat.com> - 7.5.0.20120926-23.fc18
- Fix crash printing classes (BZ 849357, Tom Tromey).
glib2-2.34.1-1.fc19
-------------------
* Tue Oct 16 2012 Kalev Lember <kalevlember(a)gmail.com> - 2.34.1-1
- Update to 2.34.1
glpi-0.83.6-1.fc19
------------------
* Tue Oct 16 2012 Remi Collet <remi(a)fedoraproject.org> - 0.83.6-1
- version 0.83.6 released (bugfix)
https://forge.indepnet.net/projects/glpi/versions/841
gnome-boxes-3.6.1.1-1.fc19
--------------------------
* Tue Oct 16 2012 Zeeshan Ali <zeenix(a)redhat.com> - 3.6.1.1-1
- Update to 3.6.1.1
gnome-documents-3.6.1-1.fc19
----------------------------
* Mon Oct 15 2012 Cosimo Cecchi <cosimoc(a)redhat.com> - 3.6.1-1
- Update to 3.6.1
gnome-themes-standard-3.6.1-1.fc19
----------------------------------
* Mon Oct 15 2012 Cosimo Cecchi <cosimoc(a)redhat.com> - 3.6.1-1
- Update to 3.6.1
* Tue Oct 02 2012 Matthias Clasen <mclasen(a)redhat.com> - 3.6.0.2-2
- Drop gtk2-engines dependency
gnomebaker-0.6.4-15.fc19
------------------------
* Tue Oct 16 2012 Tomas Smetana <tsmetana(a)redhat.com> - 0.6.4-15
- Add more icon sizes; fixes the wrong icon size in Xfce menu
gridengine-2011.11p1-6.fc19
---------------------------
* Tue Oct 16 2012 Orion Poplawski <orion(a)cora.nwra.com> 2011.11p1-6
- Build java with source/target 1.5 to properly compile generics (bug 842595)
* Wed Oct 03 2012 Orion Poplawski <orion(a)cora.nwra.com> 2011.11p1-5
- Add patch to generate load sensor reports just before sending them
- Only BR hostname on Fedora
- Fix Fedora conditional for db4 support
gtk3-3.6.1-1.fc19
-----------------
* Tue Oct 16 2012 Cosimo Cecchi <cosimoc(a)redhat.com> - 3.6.1-1
- Update to 3.6.1
* Fri Oct 12 2012 Bastien Nocera <bnocera(a)redhat.com> 3.6.0-2
- Add upstream patch to make Epiphany less painful to use
hplip-3.12.10-3.a.fc19
----------------------
* Tue Oct 16 2012 Tim Waugh <twaugh(a)redhat.com> 3.12.10-3.a
- CUPS filters should use TMPDIR when available (bug #865603).
iputils-20121011-1.fc19
-----------------------
* Mon Oct 15 2012 Jan Synáček <jsynacek(a)redhat.com> - 20121011-1
- Update to iputils-s20121011
+ drop unnecessary patches
+ update patches
+ improve spec
* Wed Aug 22 2012 Jan Synáček <jsynacek(a)redhat.com> - 20101006-18
- Improve spec for fedora
- Add systemd-rpm macros (#850167)
java-1.7.0-openjdk-1.7.0.9-2.3.3.fc19
-------------------------------------
* Tue Oct 16 2012 Deepak Bhole <dbhole(a)redhat.com> - 1.7.0.9-2.3.3.fc19
- Updated to IcedTea7-forest 2.3.3 primary arches
- Updated to IcedTea7-forest 2.1.3 for secondary arches
- Change permission of sa-jdi.jar to 644 (upstream for future)
- Resolves rhbz#s 856124, 865346, 865348, 865350, 865352, 865354, 865357,
865359, 865363, 865365, 865370, 865428, 865471, 865434, 865511, 865514,
865519, 865531, 865541, 865568
* Fri Sep 07 2012 jiri Vanek <jvanek(a)redhat.com> - 1.7.0.6-2.3.1.fc19.3
- Not-jit-archs source tarball updated to openjdk-icedtea-2.1.2.tar.gz
latex2rtf-2.3.1-1.fc19
----------------------
* Tue Oct 16 2012 Jussi Lehtola <jussilehtola(a)fedoraproject.org> - 2.3.1-1
- Update to 2.3.1.
* Tue Oct 16 2012 Jussi Lehtola <jussilehtola(a)fedoraproject.org> - 2.3.0-2
- Fixed build in EPEL.
* Tue Oct 16 2012 Jussi Lehtola <jussilehtola(a)fedoraproject.org> - 2.3.0-1
- Update to 2.3.0.
libgee-0.8.1-1.fc19
-------------------
* Tue Oct 16 2012 Michel Salim <salimma(a)fedoraproject.org> - 0.8.1-1
- Update to 0.8.1
libproxy-0.4.10-1.fc19
----------------------
* Tue Oct 16 2012 Nicolas Chauvet <kwizart(a)gmail.com> - 0.4.10-1
- Update to 0.4.10
- Fix CVE-2012-4504
libsoup-2.40.1-1.fc19
---------------------
* Tue Oct 16 2012 Kalev Lember <kalevlember(a)gmail.com> - 2.40.1-1
- Update to 2.40.1
libxcb-1.9-1.fc19
-----------------
* Tue Oct 16 2012 Adam Jackson <ajax(a)redhat.com> 1.9-1
- libxcb 1.9
lvm2-2.02.98-1.fc19
-------------------
* Tue Aug 07 2012 Alasdair Kergon <agk(a)redhat.com> - 2.02.98-1
- Don't try to issue discards to a missing PV to avoid segfault.
- Fix vgchange -aay not to activate non-matching LVs that follow a matching LV.
- Fix lvchange --resync for RAID LVs which had no effect.
- Add RAID10 support (--type raid10).
- Introduce blkdeactivate script to deactivate block devs with dependencies.
- Apply 'dmsetup mangle' for dm UUIDs besides dm names.
- Use -q as short form of --quiet.
- Suppress non-essential stdout with -qq.
- Add log/silent to lvm.conf equivalent to -qq.
- Add (p)artial attribute to lvs.
- Implement devices/global_filter to hide devices from lvmetad.
- Add lvmdump -l, to collect a state dump from lvmetad.
- Add --discards to lvconvert.
- Add support for lvcreate --discards.
- Add --poolmetadata to lvconvert and support thin meta/data dev stacking.
- Support creation of read-only thin volumes (lvcreate -p r).
- Support changes of permissions for thin snapshot volumes.
- Make lvremove ask before discarding data areas.
- Prohibit not yet supported change of thin-pool to read-only.
- Using autoextend percent 0 for thin pool fails 'lvextend --use-policies'.
- Make vgscan --cache an alias for pvscan --cache.
- Clear lvmetad metadata/PV cache before a rescan.
- Fix a segmentation fault upon receiving a corrupt lvmetad response.
- Give inconsistent metadata warnings in pvscan --cache.
- Avoid overlapping locks that could cause a deadlock in lvmetad.
- Fix memory leaks in libdaemon and lvmetad.
- Optimize libdaemon logging for a fast no-output path.
- Only create lvmetad pidfile when running as a daemon (no -f).
- Warn if lvmetad is running but disabled.
- Warn about running lvmetad with use_lvmetad = 0 in example.conf.
- Update lvmetad help output (flags and their meaning).
- Make pvscan --cache read metadata from LVM1 PVs.
- Make libdaemon buffer handling asymptotically more efficient.
- Make --sysinit suppress lvmetad connection failure warnings.
- Prohibit usage of lvcreate --thinpool with --mirrors.
- Fix lvm2api origin reporting for thin snapshot volume.
- Add implementation of lvm2api function lvm_percent_to_float.
- Allow non power of 2 thin chunk sizes if thin pool driver supports that.
- Allow limited metadata changes when PVs are missing via [vg|lv]change.
- Do not start dmeventd for lvchange --resync when monitoring is off.
- Remove pvscan --cache from lvm2-lvmetad init script.
- Remove ExecStartPost with pvscan --cache from lvm2-lvmetad.service.
- Report invalid percentage for property snap_percent of non-snaphot LVs.
- Disallow conversion of thin LVs to mirrors.
- Fix lvm2api data_percent reporting for thin volumes.
- Do not allow RAID LVs in a clustered volume group.
- Enhance insert_layer_for_lv() with recursive rename for _tdata LVs.
- Skip building dm tree for thin pool when called with origin_only flag.
- Ensure descriptors 0,1,2 are always available, using /dev/null if necessary.
- Use /proc/self/fd when available for closing opened descriptors efficiently.
- Fix inability to create, extend or convert to a large (> 1TiB) RAID LV.
- Update lvmetad communications to cope with clients using different filters.
- Clear LV_NOSYNCED flag when a RAID1 LV is converted to a linear LV.
- Disallow RAID1 upconvert if the LV was created with --nosync.
- Depend on systemd-udev-settle in units generated by activation generator.
- Disallow addition of RAID images until the array is in-sync.
- Fix RAID LV creation with '--test' so valid commands do not fail.
- Add lvm_lv_rename() to lvm2api.
- Fix setvbuf code by closing and reopening stream before changing buffer.
- Disable private buffering when using liblvm.
- When private stdin/stdout buffering is not used always use silent mode.
- Fix 32-bit device size arithmetic needing 64-bit casting throughout tree.
- Fix dereference of NULL in lvmetad error path logging.
- Fix buffer memory leak in lvmetad logging.
- Correct the discards field in the lvs manpage (2.02.97).
- Use proper condition to check for discards settings unsupported by kernel.
- Reinstate correct default to ignore discards for thin metadata from old tools.
- Issue error message when -i and -m args do not match specified RAID type.
- Change lvmetad logging syntax from -ddd to -l {all|wire|debug}.
- Add new libdaemon logging infrastructure.
- Support unmount of thin volumes from pool above thin pool threshold.
- Update man page to reflect that dm UUIDs are being mangled as well.
- Add 'mangled_uuid' and 'unmangled_uuid' fields to dmsetup info -c -o.
- Mangle device UUID on dm_task_set_uuid/newuuid call if necessary.
- Add dm_task_get_uuid_mangled/unmangled to libdevmapper.
- Always reset delay_resume_if_new flag when stacking thin pool over anything.
- Don't create value for dm_config_node and require dm_config_create_value call.
- Check for existing new_name for dmsetup rename.
- Fix memory leak in dmsetup _get_split_name() error path.
- Clean up spec file and keep support only for Fedora 18 upwards.
- Use systemd macros in rpm scriptlets to set up systemd units.
- Add Requires: bash >= 4.0 for blkdeactivate script.
maliit-plugins-0.92.5-3.fc19
----------------------------
* Tue Oct 16 2012 Peter Robinson <pbrobinson(a)fedoraproject.org> 0.92.5-3
- Update layout patches
* Fri Oct 05 2012 Peter Robinson <pbrobinson(a)fedoraproject.org> 0.92.5-2
- Add patch for olpc XO-Touch keyboard layouts
mapserver-6.0.3-6.fc19
----------------------
* Tue Oct 16 2012 Pavel Lisý <pali(a)fedoraproject.org> - 6.0.3-6
- temporary removed mapserver-java (mapscript) due to build problem
with jdk7
* Fri Oct 12 2012 Pavel Lisý <pali(a)fedoraproject.org> - 6.0.3-5
- Merged from 6.0.3-4
- fix of build for php4 and swig > 2.0.4
* Tue Aug 14 2012 Devrim GÜNDÜZ <devrim(a)gunduz.org> - 6.0.3-4
- Rebuilt for new perl.
* Thu Jul 19 2012 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 6.0.3-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Tue Jul 10 2012 Petr Pisar <ppisar(a)redhat.com> - 6.0.3-2
- Perl 5.16 rebuild
* Sat Jun 30 2012 Devrim GÜNDÜZ <devrim(a)gunduz.org> - 6.0.3-1
- Update to 6.0.3, for various fixes described at:
https://github.com/mapserver/mapserver/blob/rel-6-0-3-0/HISTORY.TXT
- Update URL, per bz #835426
* Fri Jun 08 2012 Petr Pisar <ppisar(a)redhat.com> - 6.0.2-2
- Perl 5.16 rebuild
* Mon Apr 16 2012 Devrim GÜNDÜZ <devrim(a)gunduz.org> - 6.0.2-1
- Update to 6.0.2, for various fixes described at:
http://trac.osgeo.org/mapserver/browser/tags/rel-6-0-2/mapserver/HISTORY.TXT
mate-control-center-1.4.0-9.fc19
--------------------------------
* Tue Oct 16 2012 Leigh Scott <leigh123linux(a)googlemail.com> - 1.4.0-9
- move unversioned .so back to main package
- fix directory ownership
- fix scriplets
- add missing build requires
mate-session-manager-1.4.0-8.fc19
---------------------------------
* Tue Oct 16 2012 Dan Mashal <dan.mashal(a)fedoraproject.org> - 1.4.0-8
- Add MATECONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 to install section
* Tue Oct 16 2012 Dan Mashal <dan.mashal(a)fedoraproject.org> - 1.4.0-7
- Fix configure flags
- Remove no replace macro from schemas
mate-themes-1.4.0-6.fc19
------------------------
* Tue Oct 16 2012 Leigh Scott <leigh123linux(a)googlemail.com> - 1.4.0-6
- fix mistake in scriptlets from last commit
mingw-crt-2.0.999-0.13.trunk.20121016.fc19
------------------------------------------
* Tue Oct 16 2012 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 2.0.999-0.13.trunk.20121016
- Update to 20121016 snapshot
- Use a different source tarball which doesn't contain unrelevant code (like libiberty)
- Removed Provides: bundled(libiberty)
mingw-headers-2.0.999-0.13.trunk.20121016.fc19
----------------------------------------------
* Tue Oct 16 2012 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 2.0.999-0.13.trunk.20121016
- Update to 20121016 snapshot
- Use a different source tarball which doesn't contain unrelevant code (like libiberty)
- Removed Provides: bundled(libiberty)
mod_wsgi-3.4-2.fc19
-------------------
* Wed Oct 17 2012 Matthias Runge <mrunge(a)redhat.com> - 3.4-2
- also use RPM_LD_FLAGS for build bz. #867137
nautilus-3.6.1-1.fc19
---------------------
* Mon Oct 15 2012 Cosimo Cecchi <cosimoc(a)redhat.com> - 3.6.1-1
- Update to 3.6.1
network-manager-applet-0.9.7.0-3.git20121016.fc19
-------------------------------------------------
* Tue Oct 16 2012 Jiří Klimeš <jklimes(a)redhat.com> - 0.9.7.0-3.git20121016
- Update to git snapshot (git20121016)
- editor: fix a crash when no VPN plugins are installed
ocaml-4.00.1-1.fc19
-------------------
* Tue Oct 16 2012 Richard W.M. Jones <rjones(a)redhat.com> - 4.00.1-1
- Update to upstream version 4.00.1.
- Clean up the spec file further.
* Thu Aug 16 2012 Richard W.M. Jones <rjones(a)redhat.com> - 4.00.0-2
- ppc supports natdynlink.
ocaml-findlib-1.3.3-2.fc19
--------------------------
* Tue Oct 16 2012 Richard W.M. Jones <rjones(a)redhat.com> - 1.3.3-2
- Rebuild for OCaml 4.00.1.
openbios-1.0.svn1063-1.fc19
---------------------------
* Tue Oct 16 2012 Paolo Bonzini <pbonzini(a)redhat.com> - 1.0.svn1063-1
- Move date from release to version.
openshift-origin-broker-0.6.7-14.fc19
-------------------------------------
* Thu Oct 11 2012 Troy Dawson <tdawson(a)redhat.com> 0.6.7-14
- Fixed 000000_stickshift_proxy.conf httpd 2.4 issues
openvswitch-1.7.1-3.fc19
------------------------
* Tue Oct 16 2012 Thomas Graf <tgraf(a)redhat.com> - 1.7.1-3
- require systemd instead of systemd-units to use macro helpers (#850258)
parted-3.1-8.fc19
-----------------
* Tue Oct 16 2012 Brian C. Lane <bcl(a)redhat.com> 3.1-8
- change partition UUID to use partX-UUID (#858704)
- fixup losetup usage in tests
- add support for implicit FBA DASD partitions (#707027)
- add support for EAV DASD partitions (#707032)
perl-HTML-Tree-5.02-6.fc19
--------------------------
* Tue Oct 16 2012 Petr Pisar <ppisar(a)redhat.com> - 1:5.02-6
- Do not build-require Test::LeakTrace on RHEL >= 7
perl-IO-CaptureOutput-1.1102-8.fc19
-----------------------------------
* Tue Oct 16 2012 Petr Pisar <ppisar(a)redhat.com> - 1.1102-8
- Specify all dependencies
perl-Net-Twitter-3.18004-1.fc19
-------------------------------
* Tue Oct 16 2012 Julian C. Dunn <jdunn(a)aquezada.com> - 3.18004-1
- Upgrade to 3.18004 (bz#866878)
perl-XML-XPath-1.13-21.fc19
---------------------------
* Tue Oct 16 2012 Marcela Mašláňová <mmaslano(a)redhat.com> - 1.13-21
- revert the patch. It breaks backward compatibility for some apps.
- the xpath has still man page installed.
perl-ZeroMQ-0.23-1.fc19
-----------------------
* Wed Oct 17 2012 Jose Pedro Oliveira <jpo at di.uminho.pt> - 0.23-1
- Update to 0.23 (this module is deprecated in favor of ZMQ::LibZMQ2,
ZMQ::LibZMQ3, and ZMQ).
python-billiard-2.7.3.17-1.fc19
-------------------------------
* Fri Sep 28 2012 Matthias Runge <mrunge(a)redhat.com> - 2.7.3.17-1
- update to upstream version 2.7.3.17
* Thu Sep 20 2012 Matthias Runge <mrunge(a)redhat.com> - 2.7.3.14-1
- update to upstream version 2.7.3.14
* Sun Aug 26 2012 Matthias Runge <mrunge(a)matthias-runge.de> - 2.7.3.12-1
- update to new upstream version 2.7.3.12
- provide python3 packages
- enable checks
python-celery-3.0.11-1.fc19
---------------------------
* Tue Oct 16 2012 Matthias Runge <mrunge(a)redhat.com> - 3.0.11-1
- update to upstream version 3.0.11
* Sun Aug 26 2012 Matthias Runge <mrunge(a)matthias-runge.de> - 3.0.7-1
- update to upstream version 3.0.7
* Thu Aug 23 2012 Matthias Runge <mrunge(a)matthias-runge.de> - 3.0.6-1
- update to upstream version 3.0.6
python-django-celery-3.0.11-1.fc19
----------------------------------
* Tue Oct 16 2012 Matthias Runge <mrunge(a)redhat.com> - 3.0.11-1
- update to version 3.0.11
python-keystoneclient-0.1.3.27-1.fc19
-------------------------------------
* Tue Oct 16 2012 Alan Pevec <apevec(a)redhat.com> 0.1.3.27-1
- Allow empty description for tenants (lp#1025929)
- Documentation updates
- change default wrap for tokens from 78 characters to 0 (lp#1061514)
- bootstrap a keystone user in one cmd
- Useful message when missing catalog (lp#949904)
python-nose-exclude-0.1.9-1.fc19
--------------------------------
* Tue Oct 16 2012 Matthias Runge <mrunge(a)redhat.com> - 0.1.9-1
- update to upstream release 0.1.9
qemu-1.2.0-13.fc19
------------------
* Thu Oct 11 2012 Paolo Bonzini <pbonzini(a)redhat.com> - 2:1.2.0-13
- Add ppc support to kvm.modules (original patch by David Gibson)
- Replace x86only build with kvmonly build: add separate defines and
conditionals for all packages, so that they can be chosen and
renamed in kvmonly builds and so that qemu has the appropriate requires
- Automatically pick libfdt dependancy
- Add knob to disable spice+seccomp
qpid-cpp-0.18-5.fc19
--------------------
* Tue Oct 16 2012 Darryl L. Pierce <dpierce(a)redhat.com> - 0.18-5
- Install CMake file for C++ messaging examples.
- Moved qfm2.pc from qpid-qmf to qpid-qmf-devel
- Resolves: BZ#866892
rpcbind-0.2.0-19.fc19
---------------------
* Tue Oct 16 2012 Steve Dickson <steved(a)redhat.com> - 0.2.0-19
- Renamed RPCBINDOPTS to RPCBIND_ARGS for backward compatibility (bz 861025)
rubygem-openshift-origin-node-0.14.6-6.fc19
-------------------------------------------
* Tue Oct 16 2012 Troy Dawson <tdawson(a)redhat.com> 0.14.6-6
- Fixed 000001_stickshift_node.conf httpd 2.4 issues
rubygem-rspec-rails-2.11.4-1.fc19
---------------------------------
* Tue Oct 16 2012 Vít Ondruch <vondruch(a)redhat.com> - 2.11.4-1
- Update to rspec-rails 2.11.4.
samba-4.0.0-158.fc19.rc3
------------------------
* Tue Oct 16 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-158.rc3
- Move pam_winbind.conf and the manpages to the right package.
* Tue Oct 16 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-157.rc3
* resolves: #866959 - Built auth_builtin as static module.
* Tue Oct 16 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-156.rc3
- Update systemd Requires to reflect latest packaging guidelines.
* Tue Oct 16 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-155.rc3
- Add back the AES patches which didn't make it in rc3.
* Tue Oct 16 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-154.rc3
- Update to 4.0.0rc3.
- resolves: #805562 - Unable to share print queues.
- resolves: #863388 - Unable to reload smbd configuration with systemctl.
* Wed Oct 10 2012 - Alexander Bokovoy <abokovoy(a)redhat.com> - 2:4.0.0-153.rc2
- Use alternatives to configure winbind_krb5_locator.so
- Fix Requires for winbind.
seamonkey-2.13.1-1.fc19
-----------------------
* Tue Oct 16 2012 Martin Stransky <stransky(a)redhat.com> 2.13.1-1
- Update to 2.13.1
setroubleshoot-plugins-3.0.45-1.fc18
------------------------------------
* Fri Sep 28 2012 <dwalsh(a)redhat.com> - 3.0.45-1
- Update translations
- Update mozplugger plugins to handle spice-xpi
* Thu Sep 20 2012 <dwalsh(a)redhat.com> - 3.0.44-1
- Update translations
- Add two new mozplugger plugins
* Mon Aug 13 2012 <dwalsh(a)redhat.com> - 3.0.43-1
- Update translations
- Use system setroubleshoot check_for_man
sgabios-0.20110622svn-1.fc19
----------------------------
* Mon Oct 15 2012 Paolo Bonzini <pbonzini(a)redhat.com> - 1:0.20110622svn-1
- Move date from release to version (requires epoch bump).
squid-3.2.2-1.fc19
------------------
* Tue Oct 16 2012 Tomas Hozza <thozza(a)redhat.com> - 7:3.2.2-1
- Update to latest upstream version 3.2.2
stunnel-4.54-1.fc19
-------------------
* Tue Oct 16 2012 Avesh Agarwal <avagarwa(a)redhat.com> - 4.54-1
- New upstream realease 4.54
- Updated local patches
sugar-0.97.8-1.fc19
-------------------
* Tue Oct 16 2012 Daniel Drake <dsd(a)laptop.org> 0.97.8-1
- 0.97.8 devel release
sugar-artwork-0.97.7-1.fc19
---------------------------
* Tue Oct 16 2012 Daniel Drake <dsd(a)laptop.org> 0.97.7-1
- 0.97.7 devel release
sugar-browse-144-1.fc19
-----------------------
* Tue Oct 16 2012 Manuel Quiñones <manuq(a)laptop.org> - 144-1
- New 144 release
sugar-toolkit-gtk3-0.97.7-1.fc19
--------------------------------
* Tue Oct 16 2012 Daniel Drake <dsd(a)laptop.org> 0.97.7-1
- 0.97.7 devel release
thunderbird-16.0.1-2.fc19
-------------------------
* Tue Oct 16 2012 Jan Horak <jhorak(a)redhat.com> - 16.0.1-2
- Fixed nss and nspr versions
tog-pegasus-2.12.0-2.fc19
-------------------------
* Tue Oct 16 2012 Vitezslav Crhonek <vcrhonek(a)redhat.com> - 2:2.12.0-2
- Fix local-or-remote-auth patch to work with IPv6
- Distribute modified access.conf file to conform README.RedHat.Security
tomcat-7.0.32-1.fc19
--------------------
* Wed Oct 17 2012 Ivan Afonichev <ivan.afonichev(a)gmail.com> 0:7.0.32-1
- Updated to 7.0.32
- Resolves: rhbz 842620 symlinks to taglibs
valgrind-3.8.1-4.fc19
---------------------
* Tue Oct 16 2012 Mark Wielaard <mjw(a)redhat.com> 3.8.1-4
- Add valgrind-3.8.1-xaddb.patch (#866793, KDE#307106)
warzone2100-3.1-0.10.rc3.fc19
-----------------------------
* Wed Oct 17 2012 Jan Synáček <jsynacek(a)redhat.com> - 3.1-0.10.rc3
- Update to rc3
webkitgtk3-1.10.0-2.fc18
------------------------
* Fri Oct 05 2012 Daniel Drake <dsd(a)laptop.org> - 1.10.0-2
- Restore compatibility with AMD Geode processors
xcb-proto-1.8-1.fc19
--------------------
* Tue Oct 16 2012 Adam Jackson <ajax(a)redhat.com> 1.8-1
- xcb-proto 1.8
xcm-0.5.1-1.fc19
----------------
* Tue Oct 16 2012 Nicolas Chauvet <kwizart(a)gmail.com> - 0.5.1-1
- Update to 0.5.1
- Silent an error in logs - rhbz#840502
xscreensaver-5.20-1.fc19
------------------------
* Wed Oct 17 2012 Mamoru Tasaka <mtasaka(a)fedoraproject.org> - 1:5.20-1
- Update to 5.20
* Sun Oct 07 2012 Mamoru Tasaka <mtasaka(a)fedoraproject.org> - 1:5.19-6
- Use AC_SYS_LARGEFILE to detect support for -D_FILE_OFFSET_BITS=64
* Wed Oct 03 2012 Mamoru Tasaka <mtasaka(a)fedoraproject.org> - 1:5.19-5
- May fix xscreensaver-getimage failure with BadMatch in
XPutImage (may fix debian bug 688955)
xulrunner-16.0.1-2.fc19
-----------------------
* Tue Oct 16 2012 Jan Horak <jhorak(a)redhat.com> - 16.0.1-2
- Fixed required nss and nspr version
Summary:
Added Packages: 8
Removed Packages: 0
Upgraded Packages: 81
Compose finisheded at Wed Oct 17 13:35:39 UTC 2012
11 years, 6 months