#378: Standee design required for FUDCon APAC 2015 ------------------------------+--------------------------- Reporter: pravins | Owner: Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Keywords: | Blocked By: Blocking: | ------------------------------+--------------------------- == Deadline ==
* Deadline for design to be sent to printer 28th May 2015 (Tentative)
* Deadline for items to be shipped and ready to hand out 18th June 2015 (Tentative)
* If you can, please provide us with example photos of items that are similar to the result you're looking for
Few earlier work already on https://fedorahosted.org/design- team/ticket/370. Hope so we can start working from there.
* Printer contact information if available
'''If you need printer recommendations, please include that in the ticket Include any text or content needed *No, we will not write your brochure for you'''
* Is this for an event? Yes
* Location, date, and website/wiki page for the event Details available on http://fudcon.in/
* Is this in a language other than English?
'''Size requirements, can be standard paper size or width and height'''
* For apparel or products Its required for Standee, going to print on cloth.
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: Blocked By: | Blocking: --------------------------------+------------------------- Changes (by ryanlerch):
* owner: => ryanlerch
Comment:
Happy to do this one. Just a few questions:
* What dimensions does the artwork need to be?
* What format does the printer require to print?
* Are you looking for a design where the Logo is on the standee? or something with more content on it?
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by siddhesh):
Replying to [comment:1 ryanlerch]:
Happy to do this one. Just a few questions:
- What dimensions does the artwork need to be?
7feet x 4feet with about 5 inch bleed. This is similar to the standee requirement in ticket #346, except that this standee will be made on a less expensive frame and in flex.
- What format does the printer require to print?
CMYK profile. Printers here usually work with Coral or Illustrator, but they are able to import PDF or EPS files.
- Are you looking for a design where the Logo is on the standee? or
something with more content on it?
We will definitely need one with the FUDCon Pune logo, maybe alongside the Fedora logo. Would it be OK if I post a full set of requirements after 6th June? We're going to do a walkthrough of the venue (and make a map) and will decide on banner and standee locations. I expect that walkthrough to give us a complete idea of the banners and standees required.
Also, if we need a couple of variants of the standee (say, one variant for the rooms and another for registration desk and hallways), do I need to file another ticket or is this one sufficient?
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Replying to [comment:2 siddhesh]:
Replying to [comment:1 ryanlerch]:
Happy to do this one. Just a few questions:
- What dimensions does the artwork need to be?
7feet x 4feet with about 5 inch bleed. This is similar to the standee
requirement in ticket #346, except that this standee will be made on a less expensive frame and in flex.
- What format does the printer require to print?
CMYK profile. Printers here usually work with Coral or Illustrator, but
they are able to import PDF or EPS files.
- Are you looking for a design where the Logo is on the standee? or
something with more content on it?
We will definitely need one with the FUDCon Pune logo, maybe alongside
the Fedora logo. Would it be OK if I post a full set of requirements after 6th June? We're going to do a walkthrough of the venue (and make a map) and will decide on banner and standee locations. I expect that walkthrough to give us a complete idea of the banners and standees required.
Also, if we need a couple of variants of the standee (say, one variant
for the rooms and another for registration desk and hallways), do I need to file another ticket or is this one sufficient?
We can just use this ticket to track them all since they are just variants of the same design.
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Here is a quick mockup of some designs (def not print ready yet)
the top one is a design for the Info-style standee to be used around.
and the bottom is just a general standee with the fudcon logo.
[[Image(fudcon-pune-standee1.png, , 100%)]]
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+------------------------- Changes (by duffy):
* keywords: => triaged
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by pravins):
Hi Ryan,
Design Looks nice. Please provide print ready both Registration and Generic. 6*4 foot, CMYK .pdf will work.
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Okies, here are the print-ready PDFs
The design is 7x4 feet (84x48) inches, but with the 5-inch bleed the actual size of the pdf is 94x58 inches.
https://fedorahosted.org/design-team/attachment/ticket/378/fudcon-pune- standee-normal.pdf https://fedorahosted.org/design-team/attachment/ticket/378/fudcon-pune- standee-registration.pdf
i had to guess a bit for the CMYK colours of the buildings, as they aren't normal colours from the Fedora logos, but the background and the fedora logo itself are definitely the correct CMYK colours
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
The last 4 files attached are just the source files (inkscape SVGs and Scribus SLAs) in case things need to be tweaked in the future.
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by siddhesh):
Sorry, the size I mentioned above is incorrect. The standee sizes are 3x6 and not 7x4. That is 6 feet tall and not wide - I didn't realize that I had mentioned the sizes incorrectly :/
Pravin has opened separate tickets for banners, so I'll only describe the standees here:
1. Registration standee - The general idea of your draft is nice, but adjusted to a vertical orientation 2. Content standees: 3 standee designs - Logo with "Follow: @fudconin" and a QR code pointing to https://twitter.com/fudconin - Logo with "Tweet: #fudconin" and a QR code pointing to https://twitter.com/search?q=fudconin - Logo with "Like: FUDCon India 2015" and a QR code pointing to https://www.facebook.com/groups/418266014990989/
On all these standees, have a footer (not too far down though) with the following text:
"Sessions in the Auditorium, Seminar Hall, D-203, D-204, D-205, D-405 and D-406"
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Okies, we just need to make sure we sign off on the correct designs and dimensions before i get them ready for print -- that conversion is pretty time consuming...
I will post some proofs of the new designs today for you to sign off on before I get them print-ready.
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Here are the updated designs:
[[Image(tall-standees-proof.png, 100%)]]
Is this what you were thinking?
These designs are 6x3 feet, with no bleeds currently shown (i'll add the 5inch bleeds when getting them print ready)
can you also double-check that the QR codes are correct on these? you might need to view the image whole, the png should have enough res to check them. Also, the QR code box is 6inchx6inch, so that should be large enough for people to scan easily.
cheers, ryanlerch
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by siddhesh):
Almost there, just a couple of changes:
1. Could the first standee say "REGISTRATION" like it did in your first mockup? 2. Could the footer be a bit higher up? It is currently at foot level, which seems too low
Thanks
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
okies, how about this?
[[Image(tall-standees-proof2.png, 100%)]]
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by siddhesh):
Looks perfect, thanks!
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Okies, will formulate for print. Just to confirm the formatting:
* 3x6 feet (36x72 inches) + 5inch bleeds on each edge (taking the size up to 46x82 inches) * CMYK PDFs
Did you get a chance to check the QR codes -- want to make sure those are right :)
--ryanlerch
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by pnemade):
QR codes are working and same as suggested by Siddhesh in comment#9
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by siddhesh):
Replying to [comment:15 ryanlerch]:
Okies, will formulate for print. Just to confirm the formatting:
- 3x6 feet (36x72 inches) + 5inch bleeds on each edge (taking the size
up to 46x82 inches)
- CMYK PDFs
Ack, CMYK PDFs with fonts converted to outlines.
Thanks
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Okies, here are the CMYK PDFs with all text as curves.
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- follow.pdf
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- like.pdf
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- tweet.pdf
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- registration.pdf
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by siddhesh):
There seems to be an issue with the pdf; the print vendor gets a "corrupted file" error when trying to import them into Corel. I compared them with some other PDFs that we generated earlier for printing and it seems to me that the only difference is that these pdfs are v1.4 while the others are v1.5. Could this be the problem? If yes, could you please generate the PDFs with v1.5?
If you post the source, I could work with the vendor on alternate formats too (like eps or tiff) if pdf doesn't work at all.
Thanks, Siddhesh
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
Sorry about that, I usually attach the Source files too, but ran out of time last night.
Here are the 1.5 versions of the PDFs as exported by scribus.
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- follow-pdf15.pdf
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- like-pdf15.pdf
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- tweet-pdf15.pdf
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- registration-pdf15.pdf
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: new Priority: medium | Severity: Quick & Easy Resolution: | Keywords: triaged Blocked By: | Blocking: --------------------------------+-------------------------
Comment (by ryanlerch):
And here are all the source files.
Here are the Scribus SLAs (these are the ones with the correct CMYK colours, and what i generate the PDFs from)
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- follow.sla
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- like.sla
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- registration.sla
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- tweet.sla
And for good measure, here are the SVGs that I imported into scribus to generate the above SLAs
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- follow-textaspaths.svg
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- like-textaspaths.svg
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- registration-textaspaths.svg
https://fedorahosted.org/design-team/attachment/ticket/378/tall-standee- tweet-textaspaths.svg
cheers, ryanlerch
#378: Standee design required for FUDCon APAC 2015 --------------------------------+------------------------- Reporter: pravins | Owner: ryanlerch Type: Print/Swag Design | Status: closed Priority: medium | Severity: Quick & Easy Resolution: fixed | Keywords: triaged Blocked By: | Blocking: --------------------------------+------------------------- Changes (by ryanlerch):
* status: new => closed * resolution: => fixed
Comment:
Marking this one as done now.
Feel free to reopen if changes need to be made to the print-ready PDFs.
cheers, ryanlerch
design-team-tickets@lists.fedoraproject.org