Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner anthony.schreiner@bc.edu wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner anthony.schreiner@bc.edu wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner anthony.schreiner@bc.edu wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
Cobbler sets up the following PXE boot stanza
default linux prompt 0 timeout 1 label linux kernel /images/jessie-x86_64/vmlinuz ipappend 2 append initrd=/images/jessie-x86_64/initrd.gz ksdevice=bootif lang= text auto-install/enable=true priority=critical url= http://10.0.0.1/cblr/svc/op/ks/system/lemans hostname=lemans domain=local.lan suite=jessie
(warning text wrap) which does but the system.
I can play with the preseed a bit, but I don't think I'm even getting there.
On Wed, May 25, 2016 at 4:35 PM, Locane locane@gmail.com wrote:
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner <anthony.schreiner@bc.edu
wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 but the developers have now seen the benefit of using centos. we have ubuntu 14.04 pxe booting too but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner anthony.schreiner@bc.edu wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
Hi Tony: Can you check the apache log to see if the Debian-installer try to get seed file from cobbler server?
slgray On May 26, 2016 04:50, alastair@alastair-munro.com wrote:
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 <1204> but the developers have now seen the benefit of using centos. we have ubuntu 14.04 <1404> pxe booting too but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner <anthony.schreiner@bc.edu
wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
I see no access from this client in the cobbler servers apache log.
On the failing client, after I get the missing CD-ROM message, I open another virtual console, and the ip link command shows only lo: I don't appear to be getting a network. I can look at /var/log/syslog in the console, and do not see any mention of network setup,
However I see in the syslog main-menu[204] : INFO: Menu item 'cdrom-detect' selected.
which I guess just reflects that the pop up menu came up. Looks like a clue, but I don't know how to disable that.
On Thu, May 26, 2016 at 1:52 PM, Libin Chen slgraychan@gmail.com wrote:
Hi Tony: Can you check the apache log to see if the Debian-installer try to get seed file from cobbler server?
slgray On May 26, 2016 04:50, alastair@alastair-munro.com wrote:
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 <1204> but the developers have now seen the benefit of using centos. we have ubuntu 14.04 <1404> pxe booting too but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner < anthony.schreiner@bc.edu> wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
I just tried putting the netinst CD in the drive, and PXE booting, and the installation does proceed further.
I still have things to resolve with my preseed.
On Thu, May 26, 2016 at 3:27 PM, Tony Schreiner anthony.schreiner@bc.edu wrote:
I see no access from this client in the cobbler servers apache log.
On the failing client, after I get the missing CD-ROM message, I open another virtual console, and the ip link command shows only lo: I don't appear to be getting a network. I can look at /var/log/syslog in the console, and do not see any mention of network setup,
However I see in the syslog main-menu[204] : INFO: Menu item 'cdrom-detect' selected.
which I guess just reflects that the pop up menu came up. Looks like a clue, but I don't know how to disable that.
On Thu, May 26, 2016 at 1:52 PM, Libin Chen slgraychan@gmail.com wrote:
Hi Tony: Can you check the apache log to see if the Debian-installer try to get seed file from cobbler server?
slgray On May 26, 2016 04:50, alastair@alastair-munro.com wrote:
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 <1204> but the developers have now seen the benefit of using centos. we have ubuntu 14.04 <1404> pxe booting too but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-installer-asking-fo...
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD-ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner < anthony.schreiner@bc.edu> wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, alastair@alastair-munro.com wrote:
Hi
How did u boot? pxe boot or via iso image? if iso image how was this presented? usb stick? if so how was the iso written to usb? dd works best in my experience.
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 20:45 Subject: [cobbler] cobbler managing debian install no CD-ROM detected
Have been managing CentOS system with cobbler for a while, and decided to try to add Debian to the mix.
I loop mounted the firmware-8.4.0-amd64-netinst.iso image, which is current Jessie netinst + non-free firmware, and ran import as
# cobbler import --name=jessie --breed=debian --os-version=jessie --path=/mnt
task started: 2016-05-25_144840_import task started (id=Media import, time=Wed May 25 14:48:40 2016) Found a candidate signature: breed=debian, version=jessie
running: /usr/bin/file /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release received on stdout: /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: ASCII text
received on stderr: Found a matching signature: breed=debian, version=jessie Adding distros from path /var/www/cobbler/ks_mirror/jessie: creating new distro: jessie-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-x86_64 creating new profile: jessie-x86_64 creating new distro: jessie-gtk-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-gtk-x86_64 creating new profile: jessie-gtk-x86_64 creating new distro: jessie-xen-x86_64 trying symlink: /var/www/cobbler/ks_mirror/jessie -> /var/www/cobbler/links/jessie-xen-x86_64 creating new profile: jessie-xen-x86_64 associating repos checking for apt repo(s) adding apt repo for jessie-x86_64 Added repos for jessie-x86_64 adding apt repo for jessie-gtk-x86_64 Added repos for jessie-gtk-x86_64 adding apt repo for jessie-xen-x86_64 Added repos for jessie-xen-x86_64 *** TASK COMPLETE ***
looks pretty normal. I have created a sub-profile based on jessie-x86_64 called jessie-precision670 (old dell workstation), but the only difference is the assignment of preseed file slightly modified from sample.seed as the kickstart. Then I assigned this profile to a system.
When the system installs, during the hardware discovery, it shows:
No common CD-ROM drive was detected.
...
and I cannot proceed. This seems to be before network detection takes place. I first tried with the regular debian-8.4.0-amd64.iso image; the network driver is e1000.
Any suggestions?
Tony S
cobbler mailing list cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
Hi,
I'm installing Ubuntu 16.04 LTS servers with Cobbler, which is basically also using the Debian installer.
My boot parameters are similar to yours, but I'm missing the interface parameter for network config (e.g. interface=eth0). Can you add the parameter and retry?
And what does your mirror setup look like in your preseed file?
Cheers, Tom.
On Thu, 2016-05-26 at 15:40 -0400, Tony Schreiner wrote:
I just tried putting the netinst CD in the drive, and PXE booting, and the installation does proceed further.
I still have things to resolve with my preseed.
On Thu, May 26, 2016 at 3:27 PM, Tony Schreiner <anthony.schreiner@bc .edu> wrote:
I see no access from this client in the cobbler servers apache log.
On the failing client, after I get the missing CD-ROM message, I open another virtual console, and the ip link command shows only lo: I don't appear to be getting a network. I can look at /var/log/syslog in the console, and do not see any mention of network setup,
However I see in the syslog main-menu[204] : INFO: Menu item 'cdrom-detect' selected.
which I guess just reflects that the pop up menu came up. Looks like a clue, but I don't know how to disable that.
On Thu, May 26, 2016 at 1:52 PM, Libin Chen slgraychan@gmail.com wrote:
Hi Tony: Can you check the apache log to see if the Debian-installer try to get seed file from cobbler server? slgray On May 26, 2016 04:50, alastair@alastair-munro.com wrote:
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 but the developers have now seen the benefit of using centos. we have ubuntu 14.04 pxe booting too but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no CD- ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-inst aller-asking-for-cdrom
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD- ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner <anthony.schr einer@bc.edu> wrote:
PXE boot with whatever the cobbler profile provides
On Wed, May 25, 2016 at 4:17 PM, <alastair@alastair-munro.c om> wrote: > Hi > > How did u boot? pxe boot or via iso image? if iso image > how was this presented? usb stick? if so how was the iso > written to usb? dd works best in my experience. > > -- > Alastair Munro > > > -----Original Message----- > From: Tony Schreiner anthony.schreiner@bc.edu > To: cobbler mailing list cobbler@lists.fedorahosted.org > Sent: Wed, 25 May 2016 20:45 > Subject: [cobbler] cobbler managing debian install no CD- > ROM detected > > Have been managing CentOS system with cobbler for a > while, and decided to try to add Debian to the mix. > > I loop mounted the firmware-8.4.0-amd64-netinst.iso > image, which is current Jessie netinst + non-free > firmware, and ran import as > > # cobbler import --name=jessie --breed=debian --os- > version=jessie --path=/mnt > > task started: 2016-05-25_144840_import > task started (id=Media import, time=Wed May 25 14:48:40 > 2016) > Found a candidate signature: breed=debian, version=jessie > > running: /usr/bin/file > /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release > received on stdout: > /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: > ASCII text > > received on stderr: > Found a matching signature: breed=debian, version=jessie > Adding distros from path > /var/www/cobbler/ks_mirror/jessie: > creating new distro: jessie-x86_64 > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > /var/www/cobbler/links/jessie-x86_64 > creating new profile: jessie-x86_64 > creating new distro: jessie-gtk-x86_64 > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > /var/www/cobbler/links/jessie-gtk-x86_64 > creating new profile: jessie-gtk-x86_64 > creating new distro: jessie-xen-x86_64 > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > /var/www/cobbler/links/jessie-xen-x86_64 > creating new profile: jessie-xen-x86_64 > associating repos > checking for apt repo(s) > adding apt repo for jessie-x86_64 > Added repos for jessie-x86_64 > adding apt repo for jessie-gtk-x86_64 > Added repos for jessie-gtk-x86_64 > adding apt repo for jessie-xen-x86_64 > Added repos for jessie-xen-x86_64 > *** TASK COMPLETE *** > > looks pretty normal. > I have created a sub-profile based on jessie-x86_64 > called jessie-precision670 (old dell workstation), but > the only difference is the assignment of preseed file > slightly modified from sample.seed as the kickstart. Then > I assigned this profile to a system. > > When the system installs, during the hardware discovery, > it shows: > > No common CD-ROM drive was detected. > > ... > > and I cannot proceed. This seems to be before network > detection takes place. > I first tried with the regular debian-8.4.0-amd64.iso > image; the network driver is e1000. > > Any suggestions? > > Tony S >
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedo rahosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedora hosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted .org
As I mentioned at the end of my day yesterday. The install via cobbler PXE boot did complete, if I have the netinst disk in the drive.
The /dists/jessie/main/binary-amd64/Packages.gz /dists/jessie/main/i18n/Translation-en.gz
were supplied by the cobbler server.
I am going to try Ubuntu using my same set up; just to compare; but my goal remains Debian.
On Fri, May 27, 2016 at 6:38 AM, Thomas Hager duke@sigsegv.at wrote:
Hi,
I'm installing Ubuntu 16.04 LTS servers with Cobbler, which is basically also using the Debian installer.
My boot parameters are similar to yours, but I'm missing the interface parameter for network config (e.g. interface=eth0). Can you add the parameter and retry?
And what does your mirror setup look like in your preseed file?
Cheers, Tom.
On Thu, 2016-05-26 at 15:40 -0400, Tony Schreiner wrote:
I just tried putting the netinst CD in the drive, and PXE booting, and the installation does proceed further.
I still have things to resolve with my preseed.
On Thu, May 26, 2016 at 3:27 PM, Tony Schreiner <anthony.schreiner@bc .edu> wrote:
I see no access from this client in the cobbler servers apache log.
On the failing client, after I get the missing CD-ROM message, I open another virtual console, and the ip link command shows only lo: I don't appear to be getting a network. I can look at /var/log/syslog in the console, and do not see any mention of network setup,
However I see in the syslog main-menu[204] : INFO: Menu item 'cdrom-detect' selected.
which I guess just reflects that the pop up menu came up. Looks like a clue, but I don't know how to disable that.
On Thu, May 26, 2016 at 1:52 PM, Libin Chen slgraychan@gmail.com wrote:
Hi Tony: Can you check the apache log to see if the Debian-installer try to get seed file from cobbler server? slgray On May 26, 2016 04:50, alastair@alastair-munro.com wrote:
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 but the developers have now seen the benefit of using centos. we have ubuntu 14.04 pxe booting too but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no CD- ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got farther with that guy's suggestion. I ended up abandoning it for other more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM, alastair@alastair-munro.com wrote:
http://serverfault.com/questions/754360/debian-8-3-0-pxe-inst aller-asking-for-cdrom
-- Alastair Munro
-----Original Message----- From: Tony Schreiner anthony.schreiner@bc.edu To: cobbler mailing list cobbler@lists.fedorahosted.org Sent: Wed, 25 May 2016 21:23 Subject: [cobbler] Re: cobbler managing debian install no CD- ROM detected
Failed to reply to the list, resend.
On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner <anthony.schr einer@bc.edu> wrote: > PXE boot with whatever the cobbler profile provides > > On Wed, May 25, 2016 at 4:17 PM, <alastair@alastair-munro.c > om> wrote: > > Hi > > > > How did u boot? pxe boot or via iso image? if iso image > > how was this presented? usb stick? if so how was the iso > > written to usb? dd works best in my experience. > > > > -- > > Alastair Munro > > > > > > -----Original Message----- > > From: Tony Schreiner anthony.schreiner@bc.edu > > To: cobbler mailing list cobbler@lists.fedorahosted.org > > Sent: Wed, 25 May 2016 20:45 > > Subject: [cobbler] cobbler managing debian install no CD- > > ROM detected > > > > Have been managing CentOS system with cobbler for a > > while, and decided to try to add Debian to the mix. > > > > I loop mounted the firmware-8.4.0-amd64-netinst.iso > > image, which is current Jessie netinst + non-free > > firmware, and ran import as > > > > # cobbler import --name=jessie --breed=debian --os- > > version=jessie --path=/mnt > > > > task started: 2016-05-25_144840_import > > task started (id=Media import, time=Wed May 25 14:48:40 > > 2016) > > Found a candidate signature: breed=debian, version=jessie > > > > running: /usr/bin/file > > /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release > > received on stdout: > > /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release: > > ASCII text > > > > received on stderr: > > Found a matching signature: breed=debian, version=jessie > > Adding distros from path > > /var/www/cobbler/ks_mirror/jessie: > > creating new distro: jessie-x86_64 > > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > > /var/www/cobbler/links/jessie-x86_64 > > creating new profile: jessie-x86_64 > > creating new distro: jessie-gtk-x86_64 > > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > > /var/www/cobbler/links/jessie-gtk-x86_64 > > creating new profile: jessie-gtk-x86_64 > > creating new distro: jessie-xen-x86_64 > > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > > /var/www/cobbler/links/jessie-xen-x86_64 > > creating new profile: jessie-xen-x86_64 > > associating repos > > checking for apt repo(s) > > adding apt repo for jessie-x86_64 > > Added repos for jessie-x86_64 > > adding apt repo for jessie-gtk-x86_64 > > Added repos for jessie-gtk-x86_64 > > adding apt repo for jessie-xen-x86_64 > > Added repos for jessie-xen-x86_64 > > *** TASK COMPLETE *** > > > > looks pretty normal. > > I have created a sub-profile based on jessie-x86_64 > > called jessie-precision670 (old dell workstation), but > > the only difference is the assignment of preseed file > > slightly modified from sample.seed as the kickstart. Then > > I assigned this profile to a system. > > > > When the system installs, during the hardware discovery, > > it shows: > > > > No common CD-ROM drive was detected. > > > > ... > > > > and I cannot proceed. This seems to be before network > > detection takes place. > > I first tried with the regular debian-8.4.0-amd64.iso > > image; the network driver is e1000. > > > > Any suggestions? > > > > Tony S > > >
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedo rahosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedora hosted.org
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted .org
-- Thomas "Duke" Hager duke@sigsegv.at GPG: 2048R/791C5EB1 http://www.sigsegv.at/gpg/duke.gpg ================================================================= "Never Underestimate the Power of Stupid People in Large Groups."
cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
Hi,
I did some testing with my set-up today. On the standard CD images, Debian is missing vital files and drivers for PXE booting. Download your architecture's netboot.tar.gz from https://www.debian.org/distrib/netinst#netboot and use the included kernel and initrd files to netboot your Debian servers.
I tested with an unmodified sample preseed file and the server successfully configured the network device and loaded the preseed file.
Cheers, Tom.
On 2016-05-27 14:55, Tony Schreiner wrote:
As I mentioned at the end of my day yesterday. The install via cobbler PXE boot did complete, if I have the netinst disk in the drive.
The
/dists/jessie/main/binary-amd64/Packages.gz /dists/jessie/main/i18n/Translation-en.gz
were supplied by the cobbler server.
I am going to try Ubuntu using my same set up; just to compare; but my goal remains Debian.
On Fri, May 27, 2016 at 6:38 AM, Thomas Hager duke@sigsegv.at wrote:
Hi,
I'm installing Ubuntu 16.04 LTS servers with Cobbler, which is basically also using the Debian installer.
My boot parameters are similar to yours, but I'm missing the interface parameter for network config (e.g. interface=eth0). Can you add the parameter and retry?
And what does your mirror setup look like in your preseed file?
Cheers, Tom.
On Thu, 2016-05-26 at 15:40 -0400, Tony Schreiner wrote:
I just tried putting the netinst CD in the drive, and PXE booting, and the installation does proceed further.
I still have things to resolve with my preseed.
On Thu, May 26, 2016 at 3:27 PM, Tony Schreiner
<anthony.schreiner@bc
.edu> wrote:
I see no access from this client in the cobbler servers apache
log.
On the failing client, after I get the missing CD-ROM message, I open another virtual console, and the ip link command shows only lo: I don't appear to be getting a network. I can look at /var/log/syslog in the console, and do not see any mention of network setup,
However I see in the syslog main-menu[204] : INFO: Menu item 'cdrom-detect' selected.
which I guess just reflects that the pop up menu came up. Looks like a clue, but I don't know how to disable that.
On Thu, May 26, 2016 at 1:52 PM, Libin Chen
wrote:
Hi Tony: Can you check the apache log to see if the Debian-installer
try
to get seed file from cobbler server? slgray On May 26, 2016 04:50, alastair@alastair-munro.com wrote:
Ah yes i remember you.
Personally i would stick with something more mainstream like Ubuntu LTS something. Enterprise Linux still makes the best servers imho.
We pxe build ubuntu 12.04 but the developers have now seen
the
benefit of using centos. we have ubuntu 14.04 pxe booting
too
but its not used much at our site.
-- Alastair Munro
-----Original Message----- From: Locane locane@gmail.com To: cobbler mailing list cobbler@lists.fedorahosted.org Cc: anthony.schreiner@bc.edu Sent: Wed, 25 May 2016 21:36 Subject: [cobbler] Re: cobbler managing debian install no
CD-
ROM detected
Hey that's me!
I can't remember where I ended up with this, but I got
farther
with that guy's suggestion. I ended up abandoning it for
other
more pressing projects.
I do remember it still not working totally.
On Wed, May 25, 2016 at 1:33 PM,
wrote: >
http://serverfault.com/questions/754360/debian-8-3-0-pxe-inst
> aller-asking-for-cdrom > > -- > Alastair Munro > > -----Original Message----- > From: Tony Schreiner anthony.schreiner@bc.edu > To: cobbler mailing list cobbler@lists.fedorahosted.org > Sent: Wed, 25 May 2016 21:23 > Subject: [cobbler] Re: cobbler managing debian install no
CD-
> ROM detected > > Failed to reply to the list, resend. > > On Wed, May 25, 2016 at 4:20 PM, Tony Schreiner
<anthony.schr
> einer@bc.edu> wrote: > > PXE boot with whatever the cobbler profile provides > > > > On Wed, May 25, 2016 at 4:17 PM,
<alastair@alastair-munro.c
> > om> wrote: > > > Hi > > > > > > How did u boot? pxe boot or via iso image? if iso
image
> > > how was this presented? usb stick? if so how was the
iso
> > > written to usb? dd works best in my experience. > > > > > > -- > > > Alastair Munro > > > > > > > > > -----Original Message----- > > > From: Tony Schreiner anthony.schreiner@bc.edu > > > To: cobbler mailing list
cobbler@lists.fedorahosted.org
> > > Sent: Wed, 25 May 2016 20:45 > > > Subject: [cobbler] cobbler managing debian install no
CD-
> > > ROM detected > > > > > > Have been managing CentOS system with cobbler for a > > > while, and decided to try to add Debian to the mix. > > > > > > I loop mounted the firmware-8.4.0-amd64-netinst.iso > > > image, which is current Jessie netinst + non-free > > > firmware, and ran import as > > > > > > # cobbler import --name=jessie --breed=debian --os- > > > version=jessie --path=/mnt > > > > > > task started: 2016-05-25_144840_import > > > task started (id=Media import, time=Wed May 25
14:48:40
> > > 2016) > > > Found a candidate signature: breed=debian,
version=jessie
> > > > > > running: /usr/bin/file > > > /var/www/cobbler/ks_mirror/jessie/dists/jessie/Release > > > received on stdout: > > >
/var/www/cobbler/ks_mirror/jessie/dists/jessie/Release:
> > > ASCII text > > > > > > received on stderr: > > > Found a matching signature: breed=debian,
version=jessie
> > > Adding distros from path > > > /var/www/cobbler/ks_mirror/jessie: > > > creating new distro: jessie-x86_64 > > > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > > > /var/www/cobbler/links/jessie-x86_64 > > > creating new profile: jessie-x86_64 > > > creating new distro: jessie-gtk-x86_64 > > > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > > > /var/www/cobbler/links/jessie-gtk-x86_64 > > > creating new profile: jessie-gtk-x86_64 > > > creating new distro: jessie-xen-x86_64 > > > trying symlink: /var/www/cobbler/ks_mirror/jessie -> > > > /var/www/cobbler/links/jessie-xen-x86_64 > > > creating new profile: jessie-xen-x86_64 > > > associating repos > > > checking for apt repo(s) > > > adding apt repo for jessie-x86_64 > > > Added repos for jessie-x86_64 > > > adding apt repo for jessie-gtk-x86_64 > > > Added repos for jessie-gtk-x86_64 > > > adding apt repo for jessie-xen-x86_64 > > > Added repos for jessie-xen-x86_64 > > > *** TASK COMPLETE *** > > > > > > looks pretty normal. > > > I have created a sub-profile based on jessie-x86_64 > > > called jessie-precision670 (old dell workstation), but > > > the only difference is the assignment of preseed file > > > slightly modified from sample.seed as the kickstart.
Then
> > > I assigned this profile to a system. > > > > > > When the system installs, during the hardware
discovery,
> > > it shows: > > > > > > No common CD-ROM drive was detected. > > > > > > ... > > > > > > and I cannot proceed. This seems to be before network > > > detection takes place. > > > I first tried with the regular debian-8.4.0-amd64.iso > > > image; the network driver is e1000. > > > > > > Any suggestions? > > > > > > Tony S > > > > > > > _______________________________________________ > cobbler mailing list > cobbler@lists.fedorahosted.org >
https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedo
> rahosted.org [1] >
cobbler mailing list cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedora
hosted.org [2]
cobbler mailing list cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted
.org
-- Thomas "Duke" Hager duke@sigsegv.at GPG: 2048R/791C5EB1 http://www.sigsegv.at/gpg/duke.gpg ================================================================= "Never Underestimate the Power of Stupid People in Large Groups."
cobbler mailing list cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
Links:
[1] http://rahosted.org [2] http://hosted.org _______________________________________________ cobbler mailing list cobbler@lists.fedorahosted.org https://lists.fedorahosted.org/admin/lists/cobbler@lists.fedorahosted.org
cobbler@lists.fedorahosted.org