Ooups!
I accidentally send the previous email to early....
Now to the issue,
The system - has 3 network interfaces, were the third (presented by bios)
interface is used as the public interface. We do a cobbler installing using
the third interface.
When installing Red Hat 5.5, interface 'eth0' will be assigned to the
interface which was used during the installation.
- This is fine, however is it possible to have it labeled as the instance
number it was detected as (eg. eth2)?
When installing Red Hat 6.0 or 6.1 the interface pointing at the third
interface gets labeled eth2-eth0 (seen when running ifconfig -a)
(see attached image)
Is this a known issue for Red hat 6.x or does it sound familiar to anyone?
Best Regards,
Daniel
On Tue, Nov 1, 2011 at 10:42 AM, Daniel Kertby <kertby(a)gmail.com> wrote:
Hi all,
First, thanks to you developers for continuing the excellent work on
Cobbler!
Now to the issue,
The system - has 3 network interfaces, were the third interface is used as
the public interface.
When installing Red Hat 5.5, interface 'eth0' will be assigned to the
interface which was used during the installation.