What does the command "cobbler profile list" return ?

If one of the lines is not "ORACLE", then that is your first problem.

“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)


From: "Sam Sen" <ssen@ariasystems.com>
To: cobbler@lists.fedorahosted.org
Sent: Tuesday, March 19, 2013 1:06:56 PM
Subject: [cobbler] Assigning a system to a profile

Not sure what I’m missing but I’m attempting to automatically install the OS with our new blade systems using a cobbler iso (generated by buildiso). The cobbler menu shows up with the list of available systems, but I want it to automatically install when it loads the ISO. I don’t have DHCP hence the use of the buildiso command.

 

I added a new system by running the following command. Please note, the install works fine when I select the system but that’s not what I want. Notice I have the “mac” specified and I went as far as using the mac address of eth0 as the name for the system. Both times, I’m greeted with the menu and I’m forced to choose.

 

cobbler system add --name=blade1 –mac=XX:XX:XX:XX:XX:XX --profile=ORACLE --interface=bond0 --interface-type=bond --bonding-opts="mode=6 miimon=1000" --ip-address=172.31.20.45 --hostname=blade1.domain.com --ksmeta='server_type=DB disk_layout=BLADES_ORACLE' --subnet=255.255.255.0 --gateway=172.31.20.250 --kopts='ksdevice=eth0 ip=172.31.20.45 netmask=255.255.255.0 dns=172.31.10.220 gateway=172.31.20.250' --static=1

 

 

 

--

Sam Sen

Sr Systems Administrator

215.913.4797

 

Aria Systems, Inc.

600 Reed Road, Suite 302

Broomall, PA 19008

www.ariasystems.com

 


_______________________________________________
cobbler mailing list
cobbler@lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/cobbler