Gitweb:
http://git.fedorahosted.org/git/cluster.git?p=cluster.git;a=commitdiff;h=...
Commit: a6d691f0925effe140e5970522eb1c560da9802e
Parent: 3505bc008d71100acf8b11bcfc494873904957ef
Author: Lon Hohberger <lhh(a)redhat.com>
AuthorDate: Thu Feb 3 16:34:30 2011 -0500
Committer: Lon Hohberger <lhh(a)redhat.com>
CommitterDate: Thu Feb 3 17:46:01 2011 -0500
config: Update schema
Resolves: rhbz#618705
Signed-off-by: Lon Hohberger <lhh(a)redhat.com>
---
config/tools/xml/cluster.rng.in | 848 ++++++++++++++++++++++++++++++++++++---
1 files changed, 783 insertions(+), 65 deletions(-)
diff --git a/config/tools/xml/cluster.rng.in b/config/tools/xml/cluster.rng.in
index 505e07a..75bbd28 100644
--- a/config/tools/xml/cluster.rng.in
+++ b/config/tools/xml/cluster.rng.in
@@ -1011,6 +1011,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1038,6 +1044,9 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="sleeptime" rha:description="Amount of time
(seconds) to sleep."/>
</optional>
+ <optional>
+ <attribute name="disable_rdisc" rha:description="Disable
updating of routing using RDISC protocol"/>
+ </optional>
</group>
</choice>
<optional>
@@ -1053,6 +1062,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1105,6 +1120,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1144,6 +1165,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1178,6 +1205,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1223,6 +1256,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1273,6 +1312,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1318,6 +1363,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1363,6 +1414,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1408,6 +1465,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1456,6 +1519,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1501,52 +1570,10 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
- <ref name="CHILDREN"/>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
</optional>
- </element>
- </define>
-
-
- <define name="TOMCAT-5">
- <element name="tomcat-5" rha:description="Defines a Tomcat
server">
- <choice>
- <group>
- <!-- rgmanager specific stuff -->
- <attribute name="ref" rha:description="Reference to existing
tomcat-5 resource in the resources section."/>
- </group>
- <group>
- <attribute name="name" rha:description="Name"/>
- <optional>
- <attribute name="config_file" rha:description="Config
File"/>
- </optional>
- <optional>
- <attribute name="tomcat_user" rha:description="User who runs
the Tomcat server"/>
- </optional>
- <optional>
- <attribute name="catalina_options" rha:description="Other
command-line options for Catalina"/>
- </optional>
- <optional>
- <attribute name="catalina_base" rha:description="Catalina
base directory (differs for each service)"/>
- </optional>
- <optional>
- <attribute name="shutdown_wait" rha:description="Wait X
seconds for correct end of service shutdown"/>
- </optional>
- <optional>
- <attribute name="service_name" rha:description="Inherit the
service name."/>
- </optional>
- </group>
- </choice>
<optional>
- <attribute name="__independent_subtree" rha:description="Treat
this and all children as an independent subtree."/>
- </optional>
- <optional>
- <attribute name="__enforce_timeouts" rha:description="Consider
a timeout for operations as fatal."/>
- </optional>
- <optional>
- <attribute name="__max_failures" rha:description="Maximum
number of failures before returning a failure to a status check."/>
- </optional>
- <optional>
- <attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
</optional>
<optional>
<ref name="CHILDREN"/>
@@ -1588,6 +1615,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1628,6 +1661,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1712,6 +1751,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1769,6 +1814,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1839,6 +1890,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1887,6 +1944,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1927,6 +1990,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -1963,6 +2032,94 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
+ <ref name="CHILDREN"/>
+ </optional>
+ </element>
+ </define>
+
+
+ <define name="ORAINSTANCE">
+ <element name="orainstance" rha:description="Oracle 10g Failover
Instance">
+ <choice>
+ <group>
+ <!-- rgmanager specific stuff -->
+ <attribute name="ref" rha:description="Reference to existing
orainstance resource in the resources section."/>
+ </group>
+ <group>
+ <attribute name="name" rha:description="Oracle SID"/>
+ <attribute name="user" rha:description="Oracle User
Name"/>
+ <attribute name="home" rha:description="Oracle Home
Directory"/>
+ <optional>
+ <attribute name="listeners" rha:description="Oracle
listeners"/>
+ </optional>
+ <optional>
+ <attribute name="lockfile" rha:description="Pathname for
lockfile"/>
+ </optional>
+ </group>
+ </choice>
+ <optional>
+ <attribute name="__independent_subtree" rha:description="Treat
this and all children as an independent subtree."/>
+ </optional>
+ <optional>
+ <attribute name="__enforce_timeouts" rha:description="Consider
a timeout for operations as fatal."/>
+ </optional>
+ <optional>
+ <attribute name="__max_failures" rha:description="Maximum
number of failures before returning a failure to a status check."/>
+ </optional>
+ <optional>
+ <attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
+ </optional>
+ <optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
+ <ref name="CHILDREN"/>
+ </optional>
+ </element>
+ </define>
+
+
+ <define name="ORALISTENER">
+ <element name="oralistener" rha:description="Oracle 10g Listener
Instance">
+ <choice>
+ <group>
+ <!-- rgmanager specific stuff -->
+ <attribute name="ref" rha:description="Reference to existing
oralistener resource in the resources section."/>
+ </group>
+ <group>
+ <attribute name="name" rha:description="Listener
name"/>
+ <attribute name="user" rha:description="Oracle User
Name"/>
+ <attribute name="home" rha:description="Oracle Home
Directory"/>
+ </group>
+ </choice>
+ <optional>
+ <attribute name="__independent_subtree" rha:description="Treat
this and all children as an independent subtree."/>
+ </optional>
+ <optional>
+ <attribute name="__enforce_timeouts" rha:description="Consider
a timeout for operations as fatal."/>
+ </optional>
+ <optional>
+ <attribute name="__max_failures" rha:description="Maximum
number of failures before returning a failure to a status check."/>
+ </optional>
+ <optional>
+ <attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
+ </optional>
+ <optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -2019,6 +2176,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -2060,6 +2223,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="__failure_expire_time" rha:description="Amount
of time before a failure is forgotten."/>
</optional>
<optional>
+ <attribute name="__max_restarts" rha:description="Maximum
number restarts for an independent subtree before giving up."/>
+ </optional>
+ <optional>
+ <attribute name="__restart_expire_time" rha:description="Amount
of time before a failure is forgotten for an independent subtree."/>
+ </optional>
+ <optional>
<ref name="CHILDREN"/>
</optional>
</element>
@@ -2081,7 +2250,6 @@ To validate your cluster.conf against this schema, run:
<ref name="SAMBA"/>
<ref name="MYSQL"/>
<ref name="POSTGRES-8"/>
- <ref name="TOMCAT-5"/>
<ref name="TOMCAT-6"/>
<ref name="LVM"/>
<ref name="VM"/>
@@ -2090,6 +2258,8 @@ To validate your cluster.conf against this schema, run:
<ref name="NAMED"/>
<ref name="ASEHAAGENT"/>
<ref name="NFSSERVER"/>
+ <ref name="ORAINSTANCE"/>
+ <ref name="ORALISTENER"/>
<ref name="FS"/>
<ref name="ORACLEDB"/>
<ref name="RESOURCEACTION"/>
@@ -2186,8 +2356,10 @@ To validate your cluster.conf against this schema, run:
the impilan fence device.-->
<!-- Brocade, McData, SANBox2, Bladecenter,bullpap, ipmilan -->
<group>
+ <optional>
<attribute name="ipaddr" rha:description="IP address or the
name
of the device." rha:sample="rack007"/>
+ </optional>
<optional>
<attribute name="login" rha:description="The login name used
to
access the device. " rha:sample="admin"/>
@@ -2386,6 +2558,11 @@ To validate your cluster.conf against this schema, run:
<!-- end non-generated device definitions -->
<!-- begin auto-generated device definitions -->
+ <!-- No metadata for fencing.py -->
+ <!-- No metadata for fencing_snmp.py -->
+ <!-- No metadata for fence_nss_wrapper -->
+ <!-- No metadata for fence_vmware_helper -->
+
<!-- fence_vmware -->
<group>
<optional>
@@ -2419,6 +2596,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="vmware_datacenter" rha:description="Show
only machines in specified datacenter" />
</optional>
<optional>
@@ -2436,6 +2616,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2463,6 +2661,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="partition" rha:description="Partition
name" />
</optional>
<optional>
@@ -2498,6 +2699,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2557,6 +2776,27 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="missing_as_off" rha:description="Missing
port returns OFF instead of failure" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2628,6 +2868,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2699,6 +2957,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2726,6 +3002,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
</optional>
<optional>
+ <attribute name="hidden_page" rha:description="Name of hidden
page" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode"
/>
</optional>
<optional>
@@ -2740,6 +3019,12 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2799,8 +3084,120 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
+ <!-- No metadata for fence_xcat -->
+ <!-- No metadata for fence_rackswitch -->
+ <!-- No metadata for fence_rsb -->
+
+ <!-- fence_bladecenter_snmp -->
+ <group>
+ <optional>
+ <attribute name="option"/> <!-- deprecated; for
compatibility. use "action" -->
+ </optional>
+ <optional>
+ <attribute name="action" rha:description="Fencing
Action" />
+ </optional>
+ <optional>
+ <attribute name="ipaddr" rha:description="IP Address or
Hostname" />
+ </optional>
+ <optional>
+ <attribute name="login" rha:description="Login Name"
/>
+ </optional>
+ <optional>
+ <attribute name="passwd" rha:description="Login password or
passphrase" />
+ </optional>
+ <optional>
+ <attribute name="passwd_script" rha:description="Script to
retrieve password" />
+ </optional>
+ <optional>
+ <attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
+ </optional>
+ <optional>
+ <attribute name="snmp_version" rha:description="Specifies
SNMP version to use (1,2c,3)" />
+ </optional>
+ <optional>
+ <attribute name="community" rha:description="Set the
community string" />
+ </optional>
+ <optional>
+ <attribute name="snmp_auth_prot" rha:description="Set
authentication protocol (MD5|SHA)" />
+ </optional>
+ <optional>
+ <attribute name="snmp_sec_level" rha:description="Set
security level (noAuthNoPriv|authNoPriv|authPriv)" />
+ </optional>
+ <optional>
+ <attribute name="snmp_priv_prot" rha:description="Set privacy
protocol (DES|AES)" />
+ </optional>
+ <optional>
+ <attribute name="snmp_priv_passwd" rha:description="Set
privacy protocol password" />
+ </optional>
+ <optional>
+ <attribute name="snmp_priv_passwd_script"
rha:description="Script to run to retrieve privacy password" />
+ </optional>
+ <optional>
+ <attribute name="udpport" rha:description="UDP/TCP port to
use for connection with device" />
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to
use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to
use IPv6 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="verbose" rha:description="Verbose mode"
/>
+ </optional>
+ <optional>
+ <attribute name="debug" rha:description="Write debug
information to given file" />
+ </optional>
+ <optional>
+ <attribute name="version" rha:description="Display version
information and exit" />
+ </optional>
+ <optional>
+ <attribute name="help" rha:description="Display help and
exit" />
+ </optional>
+ <optional>
+ <attribute name="separator" rha:description="Separator for
CSV created by operation list" />
+ </optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
+ </group>
+
+ <!-- No metadata for fence_cpint -->
+ <!-- No metadata for fence_drac -->
<!-- fence_ipmilan -->
<group>
@@ -2826,7 +3223,7 @@ To validate your cluster.conf against this schema, run:
<attribute name="login" rha:description="Username/Login (if
required) to control power on IPMI device" />
</optional>
<optional>
- <attribute name="action" rha:description="Operation to
perform. Valid operations: on, off, reboot, status, list, monitor or metadata" />
+ <attribute name="action" rha:description="Operation to
perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata"
/>
</optional>
<optional>
<attribute name="timeout" rha:description="Timeout (sec) for
IPMI operation" />
@@ -2838,6 +3235,12 @@ To validate your cluster.conf against this schema, run:
<attribute name="method" rha:description="Method to fence
(onoff or cycle)" />
</optional>
<optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after on/off operation" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
+ <optional>
<attribute name="verbose" rha:description="Verbose mode"
/>
</optional>
</group>
@@ -2870,6 +3273,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="ipport" rha:description="TCP port to use for
connection with device" />
</optional>
<optional>
@@ -2884,6 +3290,92 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="help" rha:description="Display help and
exit" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
+ </group>
+
+
+ <!-- fence_cisco_ucs -->
+ <group>
+ <optional>
+ <attribute name="option"/> <!-- deprecated; for
compatibility. use "action" -->
+ </optional>
+ <optional>
+ <attribute name="action" rha:description="Fencing
Action" />
+ </optional>
+ <optional>
+ <attribute name="ipaddr" rha:description="IP Address or
Hostname" />
+ </optional>
+ <optional>
+ <attribute name="login" rha:description="Login Name"
/>
+ </optional>
+ <optional>
+ <attribute name="passwd" rha:description="Login password or
passphrase" />
+ </optional>
+ <optional>
+ <attribute name="passwd_script" rha:description="Script to
retrieve password" />
+ </optional>
+ <optional>
+ <attribute name="ssl" rha:description="SSL connection"
/>
+ </optional>
+ <optional>
+ <attribute name="inet4_only" rha:description="Forces agent to
use IPv4 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="inet6_only" rha:description="Forces agent to
use IPv6 addresses only" />
+ </optional>
+ <optional>
+ <attribute name="ipport" rha:description="TCP port to use for
connection with device" />
+ </optional>
+ <optional>
+ <attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
+ </optional>
+ <optional>
+ <attribute name="verbose" rha:description="Verbose mode"
/>
+ </optional>
+ <optional>
+ <attribute name="debug" rha:description="Write debug
information to given file" />
+ </optional>
+ <optional>
+ <attribute name="version" rha:description="Display version
information and exit" />
+ </optional>
+ <optional>
+ <attribute name="help" rha:description="Display help and
exit" />
+ </optional>
+ <optional>
+ <attribute name="separator" rha:description="Separator for
CSV created by operation list" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -2940,8 +3432,28 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
+ <!-- No metadata for fence_mcdata -->
+ <!-- No metadata for fence_bullpap -->
<!-- fence_wti -->
<group>
@@ -2970,6 +3482,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
</optional>
<optional>
@@ -2996,8 +3511,27 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
+ <!-- No metadata for fence_zvm -->
<!-- fence_drac5 -->
<group>
@@ -3026,6 +3560,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="drac_version" rha:description="Force DRAC
version to use" />
</optional>
<optional>
@@ -3055,8 +3592,55 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
+ <!-- No metadata for fence_vixel -->
+ <!-- No metadata for fence_baytech -->
+
+ <!-- fence_scsi -->
+ <group>
+ <optional>
+ <attribute name="option"/> <!-- deprecated; for
compatibility. use "action" -->
+ </optional>
+ <optional>
+ <attribute name="aptpl" rha:description="Use APTPL flag for
registrations" />
+ </optional>
+ <optional>
+ <attribute name="devices" rha:description="List of devices to
be used for fencing action" />
+ </optional>
+ <optional>
+ <attribute name="logfile" rha:description="File to write
error/debug messages" />
+ </optional>
+ <optional>
+ <attribute name="key" rha:description="Key value to be used
for fencing action" />
+ </optional>
+ <optional>
+ <attribute name="action" rha:description="Fencing
action" />
+ </optional>
+ <optional>
+ <attribute name="nodename" rha:description="Name of
node" />
+ </optional>
+ </group>
+
+ <!-- No metadata for fence_brocade -->
<!-- fence_ilo_mp -->
<group>
@@ -3082,6 +3666,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="cmd_prompt" rha:description="Force command
prompt" />
</optional>
<optional>
@@ -3108,6 +3695,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -3138,6 +3743,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="switch" rha:description="Physical switch
number on device" />
</optional>
<optional>
@@ -3164,6 +3772,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -3191,6 +3817,9 @@ To validate your cluster.conf against this schema, run:
<attribute name="secure" rha:description="SSH
connection" />
</optional>
<optional>
+ <attribute name="identity_file" rha:description="Identity
file for ssh" />
+ </optional>
+ <optional>
<attribute name="inet4_only" rha:description="Forces agent to
use IPv4 addresses only" />
</optional>
<optional>
@@ -3211,10 +3840,28 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="help" rha:description="Display help and
exit" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
- <!-- fence_ibmblade -->
+ <!-- fence_rhevm -->
<group>
<optional>
<attribute name="option"/> <!-- deprecated; for
compatibility. use "action" -->
@@ -3235,55 +3882,53 @@ To validate your cluster.conf against this schema, run:
<attribute name="passwd_script" rha:description="Script to
retrieve password" />
</optional>
<optional>
- <attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
- </optional>
- <optional>
- <attribute name="snmp_version" rha:description="Specifies
SNMP version to use (1,2c,3)" />
+ <attribute name="ssl" rha:description="SSL connection"
/>
</optional>
<optional>
- <attribute name="community" rha:description="Set the
community string" />
+ <attribute name="inet4_only" rha:description="Forces agent to
use IPv4 addresses only" />
</optional>
<optional>
- <attribute name="snmp_auth_prot" rha:description="Set
authentication protocol (MD5|SHA)" />
+ <attribute name="inet6_only" rha:description="Forces agent to
use IPv6 addresses only" />
</optional>
<optional>
- <attribute name="snmp_sec_level" rha:description="Set
security level (noAuthNoPriv|authNoPriv|authPriv)" />
+ <attribute name="ipport" rha:description="TCP port to use for
connection with device" />
</optional>
<optional>
- <attribute name="snmp_priv_prot" rha:description="Set privacy
protocol (DES|AES)" />
+ <attribute name="port" rha:description="Physical plug number
or name of virtual machine" />
</optional>
<optional>
- <attribute name="snmp_priv_passwd" rha:description="Set
privacy protocol password" />
+ <attribute name="verbose" rha:description="Verbose mode"
/>
</optional>
<optional>
- <attribute name="snmp_priv_passwd_script"
rha:description="Script to run to retrieve privacy password" />
+ <attribute name="debug" rha:description="Write debug
information to given file" />
</optional>
<optional>
- <attribute name="udpport" rha:description="UDP/TCP port to
use for connection with device" />
+ <attribute name="version" rha:description="Display version
information and exit" />
</optional>
<optional>
- <attribute name="inet4_only" rha:description="Forces agent to
use IPv4 addresses only" />
+ <attribute name="help" rha:description="Display help and
exit" />
</optional>
<optional>
- <attribute name="inet6_only" rha:description="Forces agent to
use IPv6 addresses only" />
+ <attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
<optional>
- <attribute name="verbose" rha:description="Verbose mode"
/>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
</optional>
<optional>
- <attribute name="debug" rha:description="Write debug
information to given file" />
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
</optional>
<optional>
- <attribute name="version" rha:description="Display version
information and exit" />
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
</optional>
<optional>
- <attribute name="help" rha:description="Display help and
exit" />
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
</optional>
<optional>
- <attribute name="separator" rha:description="Separator for
CSV created by operation list" />
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
</optional>
</group>
+ <!-- No metadata for fence_ibmblade -->
<!-- fence_sanbox2 -->
<group>
@@ -3329,8 +3974,27 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
+ <!-- No metadata for fence_egenera -->
<!-- fence_apc_snmp -->
<group>
@@ -3400,6 +4064,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -3450,6 +4132,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="help" rha:description="Display help and
exit" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
@@ -3521,6 +4221,24 @@ To validate your cluster.conf against this schema, run:
<optional>
<attribute name="separator" rha:description="Separator for
CSV created by operation list" />
</optional>
+ <optional>
+ <attribute name="power_timeout" rha:description="Test X
seconds for status change after ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="shell_timeout" rha:description="Wait X
seconds for cmd prompt after issuing command" />
+ </optional>
+ <optional>
+ <attribute name="login_timeout" rha:description="Wait X
seconds for cmd prompt after login" />
+ </optional>
+ <optional>
+ <attribute name="power_wait" rha:description="Wait X seconds
after issuing ON/OFF" />
+ </optional>
+ <optional>
+ <attribute name="retry_on" rha:description="Count of attempts
to retry power on" />
+ </optional>
+ <optional>
+ <attribute name="delay" rha:description="Wait X seconds
before fencing is started" />
+ </optional>
</group>
<!-- end auto-generated device definitions -->