[FZH] who is the list moderator?
by jack black
Your mail to 'Chinese' with the subject
Re: [FZH] FAD ???????? Ready
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post to moderated list
我发送到fedora china的每个邮件都显示被hold,请问list moderator能否批准一下,另外出现这种情况的原因是什么?
12 years, 3 months
[FZH] Gwibber总是崩溃
by Dee.H.Y
Gwibber总是崩溃,不知道谁用且遇到了?
崩溃在当遇到twitter或者Sina插件这些个东西,需要o验证的时候.已经输入帐号密码且点击同意后.
12 years, 3 months
[FZH] Fwd: Mutter and Wayland
by Yu Chen
或许你有兴趣了解下
---------- 转发的邮件 ----------
发件人: Giovanni Campagna
日期: 2011年8月24日星期三
主题: Mutter and Wayland
收件人: Gnome Shell List <gnome-shell-list(a)gnome.org>
I should have written this mail earlier, but anyway: at the Desktop
Summit 2011 there was a BoF on KWin/Plasma and Wayland. Attendees were
members of the KDE community (including the maintainer of KWin), me
(kind of representing GNOME), and Benjamin Franzke from the Wayland
devs.
We discussed the necessary developments of the wayland protocol to fully
replace X11, and I think they may be interesting to you as well.
First of all, client side windows won't happen. KWin will never-ever
have it, at the cost of sticking a secondary title-bar on top of the
client-drawn one. The KDE use case for this is different decorations
under the different environments they target (desktop, netbook, mobile).
I explained the gnome-shell use case (different decorations in workspace
view and in the activities overview).
Also, the main advantages of client-side decorations (tabs on top,
toolbars, menus) are not seen as advantages, as they reduce consistency
among apps and facilitate developer "creativity". I think I agree on
this. For the specific case where this is desirable (like Firefox menu),
a new protocol could be devised between the compositor/wm and the app to
represent the menu (dbusmenu? GActions?), which btw would allow the
shell to place it inside the App Menu.
In any case, further discussion on this topic, in particular with the
wayland devs, which so far have been supportive of c-s-d, should happen
on the wayland-devel mailing list at freedesktop.org.
Second important point: Martin doesn't want to port KWindows
(K-equivalent of libwnck) to wayland, and as a result, much of the
functionality of EMWH won't have a wayland equivalent. The only parts
covered by wayland natively (as part of wl_shell, probably) will be
client-to-compositor coordination (wm_title, wm_state, restacking,
handling focus, move-resizing, etc.), whereas all the dock/tray related
stuff will be exported by KWin to Plasma using a private DBus interface.
We discussed coordinating this interface, for the benefits of
cairo-dock, awn, docky and the like, but at the moment they don't feel
it would be stable enough. Since the other major compositors
(mutter/gnome-shell and compiz/unity) already handle the shell parts in
process, this isn't immediately needed. The GNOME fallback case is not
affected as wayland is GL only, and metacity would still run on X11.
Third point: as I was the only GNOMEr attending, I presented myself as
"interested in porting mutter to wayland", and so I started. So far all
my work has been towards separating the X stuff from the general window
management. It lives in a branch at my local repo, but I can publish in
github if someone wants to see it. It's not guaranteed to work, although
I tried to make every commit buildable.
If on the other hand, someone else has started (or is planning to start)
this work, I think we can coordinate. Of course, this is 3.4/3.6 matter.
Giovanni
--
Yu
12 years, 3 months
[FZH] 求教一个数学问题
by Dee.H.Y
210 15
237 15
239 15
258 15
284 15
290 15
300 15
307 15
341 15
366 15
372 15
605 15
608 15
205 16
212 16
237 16
239 16
290 16
300 16
314 16
341 16
351 16
370 16
607 16
608 16
这样一组数据
假如前面的3位数为用户的编号,后面的2位数为服务的编号
现在有15跟16这2个服务
然后如何分析这2个服务之间是否存在相关性?
12 years, 3 months
[FZH] #test 測試我是否能單獨發主題
by CyrusYzGTt
test..
3.2. 拷贝 *.ttf 到 /usr/share/fonts 下面。
4. 修改配置文件:/etc/fonts/conf.d/49-sansserif.conf。这个文件实际指向
/etc/fonts/conf.avail/49-sansserif.conf。所以修改后面的文件即可。把倒数
第四行改成:
12 years, 3 months
[FZH] 请问如何控制编译内核的分辨率?
by Unix
请问如何控制编译内核的分辨率?
我的情况是自己编译的内核在字符界面下字都老大,可是yum来的内核就能够自动适应屏幕。
请问内核编译的时候哪些参数是控制自适应屏幕的?
------------------
欢迎访问我的网站:http://www.so-u.info
请多提保贵意见 不胜感谢!
12 years, 3 months
[FZH] fedora15 连不上无线
by lzw
上不了无线
可以搜到信号,每次都显示连接中,然后弹出来“无线网络需要认证”
我输的密码是对的,我在win7下一直连的好好的
新安装的fedora15 ,64位的系统
网卡是Atheros的,ath5k的驱动,wep加密
我试了fedora 15的live cd也连不上,用fedora 12可以上
[lzw@localhost ~]$ lspci | grep net
03:00.0 Ethernet controller: Atheros Communications Inc. AR5001
Wireless Network Adapter (rev 01)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
[lzw@localhost ~]$ nm-tool
NetworkManager Tool
State: disconnected
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: ath5k
State: disconnected
Default: no
HW Address: 00:26:5E:E8:69:13
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
qq: Ad-Hoc, 02:1C:BF:00:9E:66, Freq 2462 MHz, Rate 54
Mb/s, Strength 70 WEP
huang: Ad-Hoc, F6:1D:C5:34:98:E1, Freq 2457 MHz, Rate 54
Mb/s, Strength 64 WEP
ChinaNet: Infra, 00:1A:1E:4E:1A:F0, Freq 2462 MHz, Rate 54
Mb/s, Strength 0
ChinaNet: Infra, 00:24:6C:E9:A3:F0, Freq 2462 MHz, Rate 54
Mb/s, Strength 15
ChinaNet: Infra, 00:24:6C:E9:9F:E0, Freq 2412 MHz, Rate 54
Mb/s, Strength 39
ChinaNet: Infra, 00:1A:1E:4E:2A:A0, Freq 2412 MHz, Rate 54
Mb/s, Strength 39
ChinaNet: Infra, 00:1A:1E:4E:86:A0, Freq 2412 MHz, Rate 54
Mb/s, Strength 45
ChinaNet: Infra, 00:1A:1E:4D:C5:80, Freq 2437 MHz, Rate 54
Mb/s, Strength 80
TP-LINK_22E7DC: Infra, E0:05:C5:22:E7:DC, Freq 2437 MHz, Rate 54
Mb/s, Strength 5 WEP
dlink: Infra, 00:1C:F0:42:27:9E, Freq 2437 MHz, Rate 54
Mb/s, Strength 17 WEP
- Device: em2 ------------------------------------------------------------------
Type: Wired
Driver: r8169
State: unavailable
Default: no
HW Address: 90:E6:BA:0B:52:09
Capabilities:
Carrier Detect: yes
Speed: 10 Mb/s
Wired Properties
Carrier: off
[lzw@localhost ~]$
[lzw@localhost ~]$ rfkill list
bash: rfkill: command not found...
[lzw@localhost ~]$ lsmod | grep rfkill
rfkill 16552 3 asus_laptop,cfg80211
[lzw@localhost ~]$ lsmod | grep acer
[lzw@localhost ~]$ sudo service NetworkManager restart
Restarting NetworkManager (via systemctl): [ OK ]
[lzw@localhost ~]$ nmcli -p nm
===============================================================================================
网络管理器状态
===============================================================================================
运行中 状态 WIFI 硬件 WIFI WWAN 硬件 WWAN
-----------------------------------------------------------------------------------------------
运行中 连接中 已启用 已启用 已启用 已禁用
[lzw@localhost ~]$
dmesg的结果:
[ 0.698076] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.698094] TCP cubic registered
[ 0.698096] Initializing XFRM netlink socket
[ 0.698107] NET: Registered protocol family 17
[ 0.698126] Registering the dns_resolver key type
[ 0.698258] PM: Hibernation image not present or could not be loaded.
[ 0.698273] registered taskstats version 1
[ 0.698457] IMA: No TPM chip found, activating TPM-bypass!
[ 0.698924] Magic number: 7:644:750
[ 0.698944] ata_link link1: hash matches
[ 0.698946] link1: hash matches
[ 0.698962] tty ttyS1: hash matches
[ 0.699074] rtc_cmos 00:03: setting system clock to 2011-08-11
20:44:20 UTC (1313095460)
[ 0.699103] Initalizing network drop monitor service
[ 0.739476] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 0.948072] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.949376] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 0.949458] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 0.949462] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 0.991595] ata1.00: ATA-8: WDC WD2500BEVS-08VAT2, 14.01A14, max UDMA/133
[ 0.991598] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.993538] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 0.993661] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 0.993665] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 0.995537] ata1.00: configured for UDMA/133
[ 1.027022] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.185363] usb 2-5: New USB device found, idVendor=17ef, idProduct=4808
[ 1.185367] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.185370] usb 2-5: Product: CNF7237&CNF7238
[ 1.185372] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.185375] usb 2-5: SerialNumber: SN0001
[ 1.365351] ACPI: Deprecated procfs I/F for battery is loaded,
please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.365359] ACPI: Battery Slot [BAT0] (battery present)
[ 1.365546] scsi 0:0:0:0: Direct-Access ATA WDC
WD2500BEVS-0 14.0 PQ: 0 ANSI: 5
[ 1.365705] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks:
(250 GB/232 GiB)
[ 1.365737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.365769] sd 0:0:0:0: [sda] Write Protect is off
[ 1.365773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.365800] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.393040] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 1.446375] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 1.446827] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.546784] usb 6-1: New USB device found, idVendor=1b1a, idProduct=0000
[ 1.546790] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.546794] usb 6-1: Product: USB Mouse
[ 1.562061] input: USB Mouse as
/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4
[ 1.562187] generic-usb 0003:1B1A:0000.0001: input,hidraw0: USB HID
v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1/input0
[ 1.670044] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.671899] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.673333] ata2.00: ATAPI: MATSHITADVD-RAM UJ880A, SB21, max UDMA/33
[ 1.675408] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.676792] ata2.00: configured for UDMA/33
[ 1.679553] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ880A
SB21 PQ: 0 ANSI: 5
[ 1.681133] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.681137] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.681261] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.681334] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.782975] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1,
caps: 0xd04791/0xb00000/0x20000
[ 1.782983] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 1.826771] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input5
[ 1.986130] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.291131] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.293975] Freeing unused kernel memory: 948k freed
[ 2.294321] Write protecting the kernel read-only data: 10240k
[ 2.302277] Freeing unused kernel memory: 1528k freed
[ 2.311659] Freeing unused kernel memory: 1728k freed
[ 2.353417] dracut: dracut-009-10.fc15
[ 2.362810] dracut: rd.luks=0: removing cryptoluks activation
[ 2.365664] dracut: rd.lvm=0: removing LVM activation
[ 2.372026] udev[118]: starting version 167
[ 2.412818] ACPI Warning: _BQC returned an invalid level (20110112/video-473)
[ 2.418916] acpi device:21: registered as cooling_device2
[ 2.419578] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/LNXVIDEO:01/input/input6
[ 2.419690] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 2.452145] [drm] Initialized drm 1.1.0 20060810
[ 2.485337] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.485345] nouveau 0000:01:00.0: setting latency timer to 64
[ 2.488820] [drm] nouveau 0000:01:00.0: Detected an NV50 generation
card (0x298600a2)
[ 2.492260] [drm] nouveau 0000:01:00.0: Attempting to load BIOS
image from PRAMIN
[ 2.586256] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 2.586261] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 2.586264] [drm] nouveau 0000:01:00.0: Bios version 62.98.67.00
[ 2.586268] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 2.586272] [drm] nouveau 0000:01:00.0: Found Display Configuration
Block version 4.0
[ 2.586276] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 2.586279] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 2.586282] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02032312 00020010
[ 2.586284] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[ 2.586288] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 2.586291] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40
idx 0 tag 0xff
[ 2.586295] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00
idx 1 tag 0xff
[ 2.586298] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61
idx 2 tag 0x07
[ 2.586303] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0
at offset 0xDCAB
[ 2.611665] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1
at offset 0xE0B0
[ 2.618524] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2
at offset 0xE882
[ 2.618534] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3
at offset 0xE950
[ 2.619627] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4
at offset 0xEBF9
[ 2.619629] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at
offset 0xEC5E
[ 2.639637] [drm] nouveau 0000:01:00.0: 0xEC5E: Condition still not
met after 20ms, skipping following opcodes
[ 2.658687] [drm] nouveau 0000:01:00.0: 4 available performance level(s)
[ 2.658693] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core
169MHz shader 338MHz voltage 900mV fanspeed 100%
[ 2.658698] [drm] nouveau 0000:01:00.0: 1: memory 301MHz core
275MHz shader 550MHz voltage 900mV fanspeed 100%
[ 2.658703] [drm] nouveau 0000:01:00.0: 2: memory 450MHz core
500MHz shader 1000MHz voltage 1090mV fanspeed 100%
[ 2.658708] [drm] nouveau 0000:01:00.0: 3: memory 702MHz core
640MHz shader 1600MHz voltage 1200mV fanspeed 100%
[ 2.658728] [drm] nouveau 0000:01:00.0: c: memory 300MHz core
275MHz shader 1100MHz voltage 900mV
[ 2.658849] [TTM] Zone kernel: Available graphics memory: 1545768 kiB.
[ 2.658852] [TTM] Initializing pool allocator.
[ 2.658875] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 2.662637] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 2.699784] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.699787] [drm] No driver support for vblank timestamp query.
[ 2.707397] [drm] nouveau 0000:01:00.0: ACPI backlight interface
available, not registering our own
[ 2.886737] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb:
0x40000000, bo ffff8800377a2000
[ 2.886815] fbcon: nouveaufb (fb0) is primary device
[ 4.214396] Console: switching to colour frame buffer device 160x50
[ 4.216734] fb0: nouveaufb frame buffer device
[ 4.216736] drm: registered panic notifier
[ 4.216763] [drm] Initialized nouveau 0.0.16 20090420 for
0000:01:00.0 on minor 0
[ 4.225830] dracut: Starting plymouth daemon
[ 4.535253] dracut: rd.dm=0: removing DM RAID activation
[ 4.538372] dracut: rd.md=0: removing MD RAID activation
[ 4.697867] firewire_ohci 0000:0d:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 4.719711] sdhci: Secure Digital Host Controller Interface driver
[ 4.719715] sdhci: Copyright(c) Pierre Ossman
[ 4.760713] firewire_ohci: Added fw-ohci device 0000:0d:00.0, OHCI
v1.0, 4 IR + 4 IT contexts, quirks 0x1
[ 4.760932] sdhci-pci 0000:0d:00.1: SDHCI controller found
[1180:0822] (rev 22)
[ 4.760949] sdhci-pci 0000:0d:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 4.761988] sdhci-pci 0000:0d:00.1: Will use DMA mode even though
HW doesn't fully claim to support it.
[ 4.764245] Registered led device: mmc0::
[ 4.764307] mmc0: SDHCI controller on PCI [0000:0d:00.1] using DMA
[ 5.261166] firewire_core: created device fw0: GUID 001e8c0000a4a960, S400
[ 5.664095] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[ 5.769693] dracut: Checking filesystems
[ 5.769720] dracut: fsck -T -t noopts=_netdev -A -a
[ 5.816828] dracut: _Fedora-15-x86_6: Superblock last mount time is
in the future. (by less than a day, probably due to the hardware clock
being incorrectly set) FIXED. _Fedora-15-x86_6: clean, 82869/2097152
files, 740451/8368384 blocks
[ 5.816985] dracut: Remounting
/dev/disk/by-uuid/0bc943c7-46c3-4904-844c-fae44577db36 with -o ro,
[ 5.832121] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[ 5.846361] dracut: Mounted root filesystem /dev/sda4
[ 5.984198] dracut: Switching root
[ 6.520820] type=1404 audit(1313095466.320:2): enforcing=1
old_enforcing=0 auid=4294967295 ses=4294967295
[ 6.747609] SELinux: 2048 avtab hash slots, 220448 rules.
[ 6.838435] SELinux: 2048 avtab hash slots, 220448 rules.
[ 7.294062] SELinux: 9 users, 13 roles, 3606 types, 191 bools, 1
sens, 1024 cats
[ 7.294067] SELinux: 81 classes, 220448 rules
[ 7.303349] SELinux: Completing initialization.
[ 7.303352] SELinux: Setting up existing superblocks.
[ 7.303362] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.303370] SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
[ 7.303390] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 7.303397] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.303407] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 7.303452] SELinux: initialized (dev devtmpfs, type devtmpfs),
uses transition SIDs
[ 7.304159] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.304167] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
[ 7.305991] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.306011] SELinux: initialized (dev anon_inodefs, type
anon_inodefs), uses genfs_contexts
[ 7.306017] SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
[ 7.306036] SELinux: initialized (dev hugetlbfs, type hugetlbfs),
uses transition SIDs
[ 7.306059] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
[ 7.306090] SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
[ 7.306117] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 7.306131] SELinux: initialized (dev securityfs, type securityfs),
uses genfs_contexts
[ 7.306138] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.307067] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 7.307084] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 7.307577] SELinux: initialized (dev sda4, type ext4), uses xattr
[ 7.310717] type=1403 audit(1313095467.110:3): policy loaded
auid=4294967295 ses=4294967295
[ 7.484494] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 7.485221] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.835506] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.839588] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.841160] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.843207] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.843607] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.847189] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.847542] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.850144] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.853206] SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
[ 7.915500] systemd[1]: systemd 26 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 8.147756] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.183833] NET: Registered protocol family 10
[ 8.212652] systemd[1]: Set hostname to <localhost.localdomain>.
[ 8.384278] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio4/serio5/input/input7
[ 9.255879] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 9.259950] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 9.260841] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 9.261282] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 9.262150] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 9.815157] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 9.827929] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 10.727925] udev[455]: starting version 167
[ 11.013418] cfg80211: Calling CRDA to update world regulatory domain
[ 11.358892] iTCO_vendor_support: vendor-support=0
[ 11.360717] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 11.360829] iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
[ 11.446854] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 11.446866] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 11.446930] microcode: Microcode Update Driver: v2.00
<tigran(a)aivazian.fsnet.co.uk>, Peter Oruba
[ 11.464847] Linux video capture interface: v2.00
[ 11.666708] r852 0000:0d:00.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.666798] r852: driver loaded succesfully
[ 11.686484] uvcvideo: Found UVC 1.00 device CNF7237&CNF7238 (17ef:4808)
[ 11.703853] input: CNF7237&CNF7238 as
/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
[ 11.704344] usbcore: registered new interface driver uvcvideo
[ 11.704347] USB Video Class driver (v1.0.0)
[ 11.720910] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.720923] ath5k 0000:03:00.0: setting latency timer to 64
[ 11.720982] ath5k 0000:03:00.0: registered as 'phy0'
[ 12.219289] ath: EEPROM regdomain: 0x67
[ 12.219292] ath: EEPROM indicates we should expect a direct regpair map
[ 12.219296] ath: Country alpha2 being used: 00
[ 12.219298] ath: Regpair used: 0x67
[ 12.288159] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.288453] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 12.356322] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
[ 12.356744] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
[ 12.401436] mtp-probe[597]: checking bus 6, device 2:
"/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1"
[ 12.485024] asus_laptop: Asus Laptop Support version 0.42
[ 12.485431] asus_laptop: BSTS called, 0xff7f returned
[ 12.485449] asus_laptop: BOXSTER model detected
[ 12.485662] asus_laptop: Backlight controlled by ACPI video driver
[ 12.485782] input: Asus Laptop extra buttons as
/devices/platform/asus_laptop/input/input9
[ 12.583174] mtp-probe[597]: bus: 6, device: 2 was not an MTP device
[ 12.755802] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 12.755832] r8169 0000:0c:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 12.755885] r8169 0000:0c:00.0: setting latency timer to 64
[ 12.755956] r8169 0000:0c:00.0: irq 46 for MSI/MSI-X
[ 12.756221] r8169 0000:0c:00.0: eth0: RTL8168c/8111c at
0xffffc9001500e000, 90:e6:ba:0b:52:09, XID 1c4000c0 IRQ 46
[ 12.840253] cfg80211: World regulatory domain updated:
[ 12.840257] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 12.840261] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 12.840265] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 12.840268] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 12.840271] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 12.840274] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 13.218237] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 13.218307] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 13.218341] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.353414] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.353645] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.353805] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.353963] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.474495] cfg80211: Calling CRDA for country: US
[ 13.483667] cfg80211: Regulatory domain changed to country: US
[ 13.483671] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 13.483675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2700 mBm)
[ 13.483678] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 1700 mBm)
[ 13.483681] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 13.483684] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 13.483688] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 13.483691] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 3000 mBm)
[ 13.639120] udev[467]: renamed network interface eth0 to em2
[ 14.579018] SELinux: initialized (dev hugetlbfs, type hugetlbfs),
uses transition SIDs
[ 17.211249] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.315661] auditd (891): /proc/891/oom_adj is deprecated, please
use /proc/891/oom_score_adj instead.
[ 21.635186] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.644882] r8169 0000:0c:00.0: em2: link down
[ 21.645481] ADDRCONF(NETDEV_UP): em2: link is not ready
[ 21.839500] 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com>
[ 21.839504] All bugs added by David S. Miller <davem(a)redhat.com>
[ 32.773882] [drm:drm_debugfs_create_files] *ERROR* Cannot create
/sys/kernel/debug/dri/I�|�/4
[ 34.916028] wlan0: no IPv6 routers present
[ 39.587495] fuse init (API version 7.16)
[ 39.627351] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 39.670476] SELinux: initialized (dev fusectl, type fusectl), uses
genfs_contexts
[lzw@localhost ~]$
12 years, 3 months