Hey all,
Finally found some time to try to get this up and running, and of course
I have trouble out of the starting gate. It's a fresh Guruplug and the
F17 GA release image without any modifications. I wrote the kirkwood
image onto a 16G USB flasg drive for boot/root and followed the rest of
the instructions on the wiki ( both
http://fedoraproject.org/wiki/Architectures/ARM/Fedora_17_GA and
http://fedoraproject.org/wiki/Architectures/ARM/Kirkwood ).
Alas, it's a no-go. The system isn't booting, it just hangs at
"Uncompressing Linux... done, booting the kernel."
I added the arcNumber and mainlineLinux variables, but it doesn't seem
to make a difference whether I include them or not.
I'm sure I'm missing something silly/stupid but googling all day hasn't
helped. SO.. I'm reaching out.
Here's the session log.
Thanks,
-derek
U-Boot 2009.11-rc1-00602-g8e6db3d (Dec 24 2009 - 03:11:17)
Marvell-Plug2
SoC: Kirkwood 88F6281_A0
DRAM: 512 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
88E1121 Initialized on egiga0
Hit any key to stop autoboot: 0
Marvell>> setenv arcNumber 2659
Marvell>> setenv mainlineLinux yes
Marvell>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs
rootdelay=10'
Marvell>> setenv loadInitrd 'fatload usb 0 0x7400000 uInitrd-kirkwood'
Marvell>> setenv loadImage 'fatload usb 0 0x6400000 uImage-kirkwood'
Marvell>> bootcmd 'usb start; ${loadImage}; ${loadInitrd} ; bootm 0x6400000
0x7400000'
Marvell>> boot
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
reading uImage-kirkwood
................................................................................
3291896 bytes read
reading uInitrd-kirkwood
................................................................................
10112646 bytes read
## Booting kernel from Legacy Image at 06400000 ...
Image Name: 3.4.2-3.fc17.armv5tel.kirkwood
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3291832 Bytes = 3.1 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 07400000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 10112582 Bytes = 9.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[hang]
--
Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
Member, MIT Student Information Processing Board (SIPB)
URL:
http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH
warlord(a)MIT.EDU PGP key available