On Mon, Nov 1, 2021 at 7:34 PM Peter Boy <pboy(a)uni-bremen.de> wrote:
> Am 01.11.2021 um 20:23 schrieb Peter Robinson <pbrobinson(a)gmail.com>:
>
>>> You don't state what kernel version you're running is.
>>
>> Oh, sorry
>>
>> The F35 fedora-server disk image comes with 5.14.0-60
>
> Are you sure that's not the beta image? The GA kernel is
> kernel-5.14.9-300.fc35, we fixed the issue you mention around beta,
> but I don't think the fix landed in beta. It's definitely not an issue
> from my testing with other rk3399 devices now.
>
I downloaded from get fedora -> Fedora Server -> Raw image beta
https://download.fedoraproject.org/pub/fedora/linux/releases/test/35_Beta...
At least for x86_64 Beta 1.2 is the go image that will get distributed as F35 release. I
guess, it is the same for arch? The page should show the latest builds.
No, it's not, it's the RC-1.2 image, the Beta 1.2 image is exactly
that Btea. You can find the RC 1.2 images at the following link (until
GA links go live tomorrow):
https://dl.fedoraproject.org/pub/alt/stage/35_RC-1.2/
>
> Peter
>
>
>
>
>
> > P
> >
> >> The fully updated F34 fedora-server is using 5.14.14-200
> >>
> >>
> >>>
> >>> On Mon, Nov 1, 2021 at 4:44 PM Peter Boy <pboy(a)uni-bremen.de>
wrote:
> >>>>
> >>>> I tried to install F35 on my Rock Pi 4 A yesterday and ended up with
a basically working box but without an ethernet connection. An ‚ip a‘ just shows the
device without any IP settings. After setting hostname and locale and reboot I got an IPv6
local link (fe80::…) but nothing else. And after a while that vanished, too.
> >>>>
> >>>> A 'nmcli dev‘ shows an ethernet device eth0, at first in status
‚connection‘ and after a while ‚disconnected‘.
> >>>> A ’nmcli con’ first showed ‚wired connection 1‘ and device eth0,
later no device.
> >>>>
> >>>>
> >>>> In boot log I found several entries with warnings about something
not found, but in the end:
> >>>>
> >>>> rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
> >>>> rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW
Watchdog Timer
> >>>> RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver
(mii_bus:phy_addr=stmmac-0:01, irq=POLL)
> >>>>
> >>>> And NetworkManager
> >>>>
> >>>> (NM)[1103]: <info> ... device (lo): carrier: link connected
> >>>> (NM)[1103]: <info> ... manager: (lo): new Generic device
(/org/freedesk...ces/1)
> >>>> (NM)[1103]: <info> ... device (eth0): driver '(null)'
does not support carrier detection.
> >>>> (NM)[1103]: <info> ... device (eth0): driver
'rk_gmac-dwmac' does not support carrier detection.
> >>>> (NM)[1103]: <info> ... manager: (eth0): new Ethernet device
(/org/freede.../Devices/2)
> >>>> (NM)[1103]: <info> ... settings: (eth0): created default
wired connection 'Wired connection 1'
> >>>> (NM)[1103]: <info> ... device (eth0): state change: unmanaged
-> unavailable (reason 'managed', sys-iface-state: 'external‘)
> >>>>
> >>>> rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver
[RTL8211E Gigabit Ethernet] (irq=POLL)
> >>>> rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL
RxQ-0
> >>>> rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support
found
> >>>> rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
> >>>> rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link
mode
> >>>> ...
> >>>> rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow
control rx/tx
> >>>>
> >>>>
> >>>> With current fully updated F34 everything works fine, even PCIe NVMe
ssd M.2 works.
> >>>>
> >>>> I hesitate to update to F35 online. If I then find myself without a
network connection, it is difficult to reinstall F34 (with the F34 install image the
network works, but not the terminal).
> >>>>
> >>>>
> >>>>
> >>>> Any idea how getting this to work?
> >>>>
> >>>>
> >>>>
> >>>> Any help greatly appreciated.
> >>>>
> >>>> Peter
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> arm mailing list -- arm(a)lists.fedoraproject.org
> >>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> >>>> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> >>>> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> >>>> List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
> >>>> Do not reply to spam on the list, report it:
https://pagure.io/fedora-infrastructure
> >>> _______________________________________________
> >>> arm mailing list -- arm(a)lists.fedoraproject.org
> >>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> >>> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> >>> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> >>> List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
> >>> Do not reply to spam on the list, report it:
https://pagure.io/fedora-infrastructure
> >>
> >
>