Conitinuing testing on my Cubietruck.
I was switched away from the Cubietruck on my KVM for a while. Came back to of course a blank screen. No response to mouse of keyboard actions. No coming out of screensave mode.
I unplugged the KVM USB and plugged in a real keyboard. No messages in the log about the keyboard, and no response on the screen.
I unplugged the keyboard and replugged the KVM. Got messages on the console about this: [ 3283.336250] usb 1-1: USB disconnect, device number 2 [ 3287.658034] usb 1-1: new low-speed USB device number 3 using ohci-platform [ 3287.867066] usb 1-1: New USB device found, idVendor=050d, idProduct=0119 [ 3287.873817] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3287.880998] usb 1-1: Product: USB-PS2 Adapter [ 3287.885515] usb 1-1: Manufacturer: Belkin Components [ 3287.904484] input: Belkin Components USB-PS2 Adapter as /devices/platform/soc@01c00000/1c14400.usb/usb1/1-1/1-1:1.0/0003:050D:0119.0003/input/input2 [ 3287.974767] hid-generic 0003:050D:0119.0003: input,hidraw0: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-1c14400.usb-1/input0 [ 3287.996086] input: Belkin Components USB-PS2 Adapter as /devices/platform/soc@01c00000/1c14400.usb/usb1/1-1/1-1:1.1/0003:050D:0119.0004/input/input3 [ 3288.012321] hid-generic 0003:050D:0119.0004: input,hidraw1: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-1c14400.usb-1/input1
But still no response.
Rebooted from the serial console and eventually the video showed the login in screen. No keyboard response. Unplugged the KVM and attached a keyboard, still no response. Reversed to KVM and nothing.
Powered off from the serial console and repowered up. Now the KVM keyboard responded and I could log in.
I have turned off the screensaver for now.
I experienced a similar problem with screensaver when I ran the F19-Xfce remix on my Cubies. Even with a direct connected kybd, I could not get a response once it went into screensaver, and I had to disable screensaver.
Of course F21 does not have video support for Allwinner, so did not get to test this during the F21 development.
More testing. Seems the problem is more in the USB support. I am running now with a real USB kybd and mouse, and just left the system alone and no response on the keyboard or mouse. Looking at the serial console I see:
# [ 3125.892236] usb 2-1: USB disconnect, device number 3 [ 3125.897847] usb 1-1: USB disconnect, device number 4
I did not do anything with the devices. Just left them idle.
On 02/11/2015 11:27 AM, Robert Moskowitz wrote:
Conitinuing testing on my Cubietruck.
I was switched away from the Cubietruck on my KVM for a while. Came back to of course a blank screen. No response to mouse of keyboard actions. No coming out of screensave mode.
I unplugged the KVM USB and plugged in a real keyboard. No messages in the log about the keyboard, and no response on the screen.
I unplugged the keyboard and replugged the KVM. Got messages on the console about this: [ 3283.336250] usb 1-1: USB disconnect, device number 2 [ 3287.658034] usb 1-1: new low-speed USB device number 3 using ohci-platform [ 3287.867066] usb 1-1: New USB device found, idVendor=050d, idProduct=0119 [ 3287.873817] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3287.880998] usb 1-1: Product: USB-PS2 Adapter [ 3287.885515] usb 1-1: Manufacturer: Belkin Components [ 3287.904484] input: Belkin Components USB-PS2 Adapter as /devices/platform/soc@01c00000/1c14400.usb/usb1/1-1/1-1:1.0/0003:050D:0119.0003/input/input2 [ 3287.974767] hid-generic 0003:050D:0119.0003: input,hidraw0: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-1c14400.usb-1/input0 [ 3287.996086] input: Belkin Components USB-PS2 Adapter as /devices/platform/soc@01c00000/1c14400.usb/usb1/1-1/1-1:1.1/0003:050D:0119.0004/input/input3 [ 3288.012321] hid-generic 0003:050D:0119.0004: input,hidraw1: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-1c14400.usb-1/input1
But still no response.
Rebooted from the serial console and eventually the video showed the login in screen. No keyboard response. Unplugged the KVM and attached a keyboard, still no response. Reversed to KVM and nothing.
Powered off from the serial console and repowered up. Now the KVM keyboard responded and I could log in.
I have turned off the screensaver for now.
I experienced a similar problem with screensaver when I ran the F19-Xfce remix on my Cubies. Even with a direct connected kybd, I could not get a response once it went into screensaver, and I had to disable screensaver.
Of course F21 does not have video support for Allwinner, so did not get to test this during the F21 development.
arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
I did a yum update so I am running on most recent stuff. Did a poweroff and pressed the power button. The keyboard was unresponsive. I did a poweroff via the serial console then unplugged the power, plugged back in, and the system came up and I could log via the kybd/monitor. I then just let the system sit and here is what I see in the message log:
Feb 11 17:13:31 cubiet journal: <audit-1131> pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Feb 11 17:50:31 cubiet kernel: [ 3130.045252] usb 3-1: USB disconnect, device number 2 Feb 11 17:50:31 cubiet kernel: [ 3130.050864] usb 2-1: USB disconnect, device number 2 Feb 11 17:50:31 cubiet kernel: usb 3-1: USB disconnect, device number 2 Feb 11 17:50:31 cubiet kernel: usb 2-1: USB disconnect, device number 2 Feb 11 17:50:31 cubiet systemd-udevd: error opening USB device 'descriptors' file Feb 11 17:50:32 cubiet systemd-udevd: error opening USB device 'descriptors' file
37 minutes? I am sure there is some basis for this.
Of course the keyboard is unresponsive and the monitor is blanked.
Powering the testbed down for the night.
On 02/11/2015 01:51 PM, Robert Moskowitz wrote:
More testing. Seems the problem is more in the USB support. I am running now with a real USB kybd and mouse, and just left the system alone and no response on the keyboard or mouse. Looking at the serial console I see:
# [ 3125.892236] usb 2-1: USB disconnect, device number 3 [ 3125.897847] usb 1-1: USB disconnect, device number 4
I did not do anything with the devices. Just left them idle.
On 02/11/2015 11:27 AM, Robert Moskowitz wrote:
Conitinuing testing on my Cubietruck.
I was switched away from the Cubietruck on my KVM for a while. Came back to of course a blank screen. No response to mouse of keyboard actions. No coming out of screensave mode.
I unplugged the KVM USB and plugged in a real keyboard. No messages in the log about the keyboard, and no response on the screen.
I unplugged the keyboard and replugged the KVM. Got messages on the console about this: [ 3283.336250] usb 1-1: USB disconnect, device number 2 [ 3287.658034] usb 1-1: new low-speed USB device number 3 using ohci-platform [ 3287.867066] usb 1-1: New USB device found, idVendor=050d, idProduct=0119 [ 3287.873817] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3287.880998] usb 1-1: Product: USB-PS2 Adapter [ 3287.885515] usb 1-1: Manufacturer: Belkin Components [ 3287.904484] input: Belkin Components USB-PS2 Adapter as /devices/platform/soc@01c00000/1c14400.usb/usb1/1-1/1-1:1.0/0003:050D:0119.0003/input/input2 [ 3287.974767] hid-generic 0003:050D:0119.0003: input,hidraw0: USB HID v1.00 Keyboard [Belkin Components USB-PS2 Adapter ] on usb-1c14400.usb-1/input0 [ 3287.996086] input: Belkin Components USB-PS2 Adapter as /devices/platform/soc@01c00000/1c14400.usb/usb1/1-1/1-1:1.1/0003:050D:0119.0004/input/input3 [ 3288.012321] hid-generic 0003:050D:0119.0004: input,hidraw1: USB HID v1.00 Mouse [Belkin Components USB-PS2 Adapter ] on usb-1c14400.usb-1/input1
But still no response.
Rebooted from the serial console and eventually the video showed the login in screen. No keyboard response. Unplugged the KVM and attached a keyboard, still no response. Reversed to KVM and nothing.
Powered off from the serial console and repowered up. Now the KVM keyboard responded and I could log in.
I have turned off the screensaver for now.
I experienced a similar problem with screensaver when I ran the F19-Xfce remix on my Cubies. Even with a direct connected kybd, I could not get a response once it went into screensaver, and I had to disable screensaver.
Of course F21 does not have video support for Allwinner, so did not get to test this during the F21 development.
arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm