I am a little confused with the following, just tried Fedora-Minimal-armhfp-24-20160422.n.0 on a Utilite-pro
Using U-Boot SPL 2016.03 (Apr 09 2016 - 14:33:27) Trying to boot from MMC
U-Boot 2016.03 (Apr 09 2016 - 14:33:27 +0000)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: CM-FX6 I2C: ready DRAM: 2 GiB NAND: 0 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB Display: HDMI (1024x768)
Distorted logo
Using
U-Boot SPL 2016.03 (Apr 19 2016 - 15:07:05) Trying to boot from MMC
U-Boot 2016.03 (Apr 19 2016 - 15:07:05 +0000)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: CM-FX6 I2C: ready DRAM: 2 GiB NAND: 0 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB Display: HDMI (1024x768) In: serial Out: vga Err: vga PCB: 1.0 Net: FEC starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc2 is current device Scanning mmc 2:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 558 bytes read in 45 ms (11.7 KiB/s) Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring malformed menu command: hidden Ignoring unknown command: totaltimeout Fedora-Minimal-armhfp-24-20160422.n.0 Boot Options. 1: Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) Enter choice: 1: Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) Retrieving file: /initramfs-4.5.1-300.fc24.armv7hl.img 40016290 bytes read in 1984 ms (19.2 MiB/s) Skipping Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) for failure retrieving kernel SCRIPT FAILED: continuing... Found U-Boot script /boot.scr 2 bytes read in 40 ms (0 Bytes/s) ## Executing script at 17e00000 Wrong image format for "source" command SCRIPT FAILED: continuing... FEC Waiting for PHY auto negotiation to complete.......user interrupt! BOOTP broadcast 1
extlinux.conf contains
# extlinux.conf generated by appliance-creator ui menu.c32 menu autoboot Welcome to Fedora-Minimal-armhfp-24-20160422.n.0. Automatic boot in # second{,s}. Press a key for options. menu title Fedora-Minimal-armhfp-24-20160422.n.0 Boot Options. menu hidden timeout 20 totaltimeout 600
label Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) kernel /vmlinuz-4.5.1-300.fc24.armv7hl append ro root=UUID=2bd7ab38-4655-40a2-bbe0-f2f83feb2b4f console=ttymxc3,115200 fdtdir /dtb-4.5.1-300.fc24.armv7hl/ initrd /initramfs-4.5.1-300.fc24.armv7hl.img
The boot partition does contain the vmlinuz-4.5.1-300.fc24.armv7hl
I tried the same on a cuboxi-4pro, the system boots and generates output on the serial connection, no problems with ssh either.
Regards
David
On Wed, Apr 27, 2016 at 5:17 PM, David Jones djones-proj@bluewin.ch wrote:
I am a little confused with the following, just tried Fedora-Minimal-armhfp-24-20160422.n.0 on a Utilite-pro
I believe there's issues with the utilite in general. The upstream support is truly terrible so it's quite possible it doesn't work currently at all. The patches we have to try to support it at best support 1 eth, mmc, SATA and serial console. I have one to try and improve the situation but I've not had the time to do so.
Peter
Using U-Boot SPL 2016.03 (Apr 09 2016 - 14:33:27) Trying to boot from MMC
U-Boot 2016.03 (Apr 09 2016 - 14:33:27 +0000)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: CM-FX6 I2C: ready DRAM: 2 GiB NAND: 0 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB Display: HDMI (1024x768)
Distorted logo
Using
U-Boot SPL 2016.03 (Apr 19 2016 - 15:07:05) Trying to boot from MMC
U-Boot 2016.03 (Apr 19 2016 - 15:07:05 +0000)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: CM-FX6 I2C: ready DRAM: 2 GiB NAND: 0 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB Display: HDMI (1024x768) In: serial Out: vga Err: vga PCB: 1.0 Net: FEC starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc2 is current device Scanning mmc 2:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 558 bytes read in 45 ms (11.7 KiB/s) Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring malformed menu command: hidden Ignoring unknown command: totaltimeout Fedora-Minimal-armhfp-24-20160422.n.0 Boot Options. 1: Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) Enter choice: 1: Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) Retrieving file: /initramfs-4.5.1-300.fc24.armv7hl.img 40016290 bytes read in 1984 ms (19.2 MiB/s) Skipping Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) for failure retrieving kernel SCRIPT FAILED: continuing... Found U-Boot script /boot.scr 2 bytes read in 40 ms (0 Bytes/s) ## Executing script at 17e00000 Wrong image format for "source" command SCRIPT FAILED: continuing... FEC Waiting for PHY auto negotiation to complete.......user interrupt! BOOTP broadcast 1
extlinux.conf contains
# extlinux.conf generated by appliance-creator ui menu.c32 menu autoboot Welcome to Fedora-Minimal-armhfp-24-20160422.n.0. Automatic boot in # second{,s}. Press a key for options. menu title Fedora-Minimal-armhfp-24-20160422.n.0 Boot Options. menu hidden timeout 20 totaltimeout 600
label Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl) kernel /vmlinuz-4.5.1-300.fc24.armv7hl append ro root=UUID=2bd7ab38-4655-40a2-bbe0-f2f83feb2b4f console=ttymxc3,115200 fdtdir /dtb-4.5.1-300.fc24.armv7hl/ initrd /initramfs-4.5.1-300.fc24.armv7hl.img
The boot partition does contain the vmlinuz-4.5.1-300.fc24.armv7hl
I tried the same on a cuboxi-4pro, the system boots and generates output on the serial connection, no problems with ssh either.
Regards
David _______________________________________________ arm mailing list arm@lists.fedoraproject.org http://lists.fedoraproject.org/admin/lists/arm@lists.fedoraproject.org