I have an Olimex a10s-olinuxino-micro-4mb
(
https://www.olimex.com/Products/OLinuXino/A10S/A10S-OLinuXino-MICRO-4GB/o...
). It has:
Allwinner A10S CPU
4MB onboard flash memory
MicroSD slot
SD slot
HDMI video and audio out
headphone out
audio line in
10/100 Ethernet port
USB2 port
OTG USB port
LCD interface (4.3", 7", 10")
I downloaded the rawhide image
Fedora-Xfce-armhfp-rawhide-20140712-sda.raw.xz. unxz'd it.
I then wrote it to a microSD card.
When it finished, I popped it out and re-inserted it so that it would
mount the partitions. I read the instructions for the CubieTruck on the
ARM Rawhide Installation page
(
https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation
). I looked around in the /usr/share/uboot directory, but didn't find a
directory I thought was more appropriate.
Are there any instructions for how to build the uboot .bin file? I'd
like to see if I can build one that is more appropriate for my board.
I also noticed in the Known Issues & Usage Tips section that graphical
display is not currently supported. Are there plans to have the
graphical display working by the time Fedora 21 is released?
Craig