You don't state what kernel version you're running is.
On Mon, Nov 1, 2021 at 4:44 PM Peter Boy <pboy(a)uni-bremen.de> wrote:
> I tried to install F35 on my Rock Pi 4 A yesterday and ended up with a basically
working box but without an ethernet connection. An ‚ip a‘ just shows the device without
any IP settings. After setting hostname and locale and reboot I got an IPv6 local link
(fe80::…) but nothing else. And after a while that vanished, too.
> A 'nmcli dev‘ shows an ethernet device eth0, at first in status ‚connection‘ and
after a while ‚disconnected‘.
> A ’nmcli con’ first showed ‚wired connection 1‘ and device eth0, later no device.
> In boot log I found several entries with warnings about something not found, but in
> rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
> rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
> RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver
> And NetworkManager
> (NM): <info> ... device (lo): carrier: link connected
> (NM): <info> ... manager: (lo): new Generic device
> (NM): <info> ... device (eth0): driver '(null)' does not support
> (NM): <info> ... device (eth0): driver 'rk_gmac-dwmac' does not
support carrier detection.
> (NM): <info> ... manager: (eth0): new Ethernet device
> (NM): <info> ... settings: (eth0): created default wired connection
'Wired connection 1'
> (NM): <info> ... device (eth0): state change: unmanaged ->
unavailable (reason 'managed', sys-iface-state: 'external‘)
> rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit
> rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
> rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
> rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
> rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
> rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
> With current fully updated F34 everything works fine, even PCIe NVMe ssd M.2 works.
> I hesitate to update to F35 online. If I then find myself without a network
connection, it is difficult to reinstall F34 (with the F34 install image the network
works, but not the terminal).
> Any idea how getting this to work?
> Any help greatly appreciated.
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
> Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure