Hi,
On 26-01-15 08:31, Frans Meulenbroeks wrote:
Apparently this did not make it to the list. Guess this is because my
list
membership was not approved yet then.
2015-01-25 11:30 GMT+01:00 Frans Meulenbroeks <fransmeulenbroeks(a)gmail.com>:
> Hi,
>
> I was trying to see which of the ARM boards I had lying around would boot
> FC21.
> I followed these instructions:
>
>
http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation
>
> With these I managed to boot FC21 successfully on
> - orange pi (A20, similar to banana pi)
> - pandaboard
> - beaglebone white
>
> However, although according to the instructions the same MLO and u-boot
> are to be used for beaglebone black, it does not boot there, although the
> very same card works with beaglebone white.
> I have added a serial port to the BBB and captured the boot log. See at
> the end of this message.
> Anyone an idea what is wrong?
>
> While at it:
> According to
>
http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation/Hardware...
> beagleboard XM also works but there is no u-boot data in the image for XM.
> Suggestions for this?
>
> And I noticed the u-boot dir also contains a u-boot for the Mele A1000. I
> wanted to try that one the A2000 which is identical hw, but it did not work
> (and I do not have serial for the A2000)
> Anyone a suggestion.
u-boot & the kernel in F-21 do not support hdmi out on A10 devices, however
rawhide does, so give rawhide a try with the A1000 u-boot (from rawhide)
that should give you video output and hopefully will tell you more.
Regards,
Hans