On Mar 5, 2013, at 12:37 PM, Peter Robinson wrote:
Hi All,
We're getting close to pushing a proper updates build for the F-18/17
releases to rebase them to kernel 3.8.x.
I have done a scratch build of 3.8.2-202 [1] and I would like some
wider testing especially on armv5tel devices.
I ran a test on my OpenRD Client. The system has 512 MB of RAM. A kirkwood SOC and a xgi
z11 video chip. I have uboot in the OpenRd client set to boot the kernel from a boot
partition on a sata drive and have the rootfs in another partition on the sata drive. I
use a file for swap. The roofs is Fedora 17.
I downloaded kernel-kirkwood-3.8.2-202.fc18.armv5tel.rpm from your scratch build
to the sata disk in the OpenRD Client and then ran
su -c 'yum -v localinstall kernel-kirkwood-3.8.2-202.fc18.armv5tel.rpm'
The installation went well. It did take a bit of time during the cleanup phase and
I assume that is due to dracut running.
I then rebooted the OpenRD Client and it booted cleanly with the new kernel.
[root@OpenRD ~]# uname -a
Linux OpenRD 3.8.2-202.fc18.armv5tel.kirkwood #1 Mon Mar 4 20:24:06 UTC 2013 armv5tel
armv5tel armv5tel GNU/Linux
lsmod shows the xgifb loaded for the OpenRD Clients xgi z11 video chip
cat /proc/cpuinfo
processor : 0
model name : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS : 1196.85
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Hardware : Marvell OpenRD Client Board
Revision : 0000
Serial : 0000000000000000
If you need any more info let me know.
Oh and thank you for all the hard work.
Robert H.
A quick overview of the status of this kernel on the various devices
we support:
* Beagle XM - I have it working on my XM! WOO! I plan on generating a
test image to allow wider testing of this because I know there's
interesting. You need DeviceTree to get it to work.
* Panda - Tested on the original Panda, ES testing still outstanding
* Trimslice - DTS tested working with uboot v2012.04-1.01 [3] (the one
with half the RAM)
* Highbank - tested and working
As we do further testing the wiki [2] will be updated.
As far as I'm concerned the remaining outstanding bugs are as follows:
* vexpress on qemu crashes on boot due to divide by zero bug.
* upgrade from kernel-highbank -> kernel
Peter
[1]
http://arm.koji.fedoraproject.org/koji/taskinfo?taskID=1530549
[2]
https://fedoraproject.org/wiki/Architectures/ARM/Quality_Assurance/Kernel...
[3]
http://www.trimslice.com/wiki/index.php/Trim-Slice_Firmware_Updater
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm