El mié, 23-08-2017 a las 11:46 -0700, Stewart Samuels escribió:
Dennis,
Have you tried building the system on an eMMC card and booting that?
Just curious.
Thanks,
Stewart
I have not, I do not have a emmc card
Dennis
On 08/23/2017 10:41 AM, Dennis Gilmore wrote:
> El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
> > Hi Dennis,
> >
> > I have been doing the same process as you with the exception that
> > I
> > change the UUIDs in extlinux.conf and /etc/fstab. The other
> > thing I
> > do, because I change update the UUIDs, is create a new
> > initramfs. I
> > will try again later without creating a new initramfs to see if I
> > can
> > get to where you are. BTW, I also am trying to load the Mate
> > spin,
> > not the server release.
> >
> > Can you try an experiment for me? Can you try to upgrade your
> > system
> > doing a "dnf -y update" command. The reboot to ensure it reboots
> > with the new kernel? By doing the dnf upgrade, you will force
> > the
> > system to use dracut to create a new initramfs image. Let's see
> > if
> > this now works. This is essentially where the system began
> > failing
> > after f24. We need some confidence that the upgrade process is
> > not
> > going to kill our path forward.
>
> I plugged in a usb2 ethernet adapter and updated the system and it
> came
> back fine, however I had to use a usb2 ethernet adapater in the
> usb2
> port as it seems the usb3 port is not working, the ethernet onboard
> is
> wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
>
>
> Dennis
>
> > Thanks.
> >
> > Stewart
> >
> > On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
> > > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> > > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> > > > --
> > > >
> > > > Hello Dennis,
> > > >
> > > > that looks beautiful. You have a running Odroid-XU4 with
> > > > actual
> > > > Kernel
> > > > with Fedora 26 !!
> > > >
> > > > How did you manage it? I haven't so much luck with the
> > > > installation.
> > > >
> > > > Thanks
> > > > Andreas
> > >
> > > I ran
> > >
> > > xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb
> > > bs=4MiB
> > > cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
> > > cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
> > > I grabbed from
https://github.com/hardkernel/u-boot/tree/odroid
> > > xu4-
> > > v201
> > > 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
> > > tzsw.bin.hardkernel and sd_fusing.sh
> > > then ran
> > > sh sd_fusing.sh /dev/sdb
> > > I used parted to resize partition 4 mounted it and ran
> > > xfs_growfs
> > > so it
> > > filled the sd card
> > >
> > > I mounted partition 2 and edited extlinux/extlinux.conf adding
> > > cpuidle.off=1 to the append line. I did have to edit etc/passwd
> > > and
> > > unlock the root account as initial-setup is not running.
> > >
> > > of couse /dev/sdb was my sdcard, make sure you have the right
> > > device
> > > for yours. It does seem that the nic is not detected however.
> > >
> > > Dennis
> > >
> > >
> > > _______________________________________________
> > > arm mailing list -- arm(a)lists.fedoraproject.org
> > > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.o
> > > rg
> >
> >
> > _______________________________________________
> > arm mailing list -- arm(a)lists.fedoraproject.org
> > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> >
> >
> > _______________________________________________
> > arm mailing list -- arm(a)lists.fedoraproject.org
> > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org