On 19 December 2014 19:00:17 GMT+08:00, "Пламен Христов"
2014-12-18 8:08 GMT+02:00 Peter Robinson
> I'm running F-21 on two revisions of the Panda-ES without issues. I'm
> running one with a minimal install and one with XFCE.
> I've not seen any errors around thermal errors even when compiling
> things. Have you tried installing the kernel-tools package and
> the tmon util? My devices sit at around 30 degrees at idle.
> The wlcore module error is a known issue. I black list them as I
> use wireless. The chip needs a userspace util called uim to put the
> chip into the right mode, also the patches to support DeviceTree
> haven't landed upstream. In general the WiLink wireless drivers
> in a great state.
> I create a file called:
> And add the following two lines:
> blacklist wl12xx
> blacklist wlcore
> I can't help with the other error without more information. Overall
> with F-21 GA the Panda-ES does work relatively well in my experience.
> There's certainly some improvements to be made but it's generally
> usable with XFCE or as a minimal install system.
Thank You fo reply, Peter!
I'have installed kernel-tools and banned wlcore. Than reboot before
Tmon indicates ~50C at Idle and goes 79 with little load. Based on
Is it really idle? Something seems to be making him abnormally hot.
Any clues in top or cat /proc/interrupts?
expiriance it can't survive full system update, without termal
Here is my logs:
Last time I forgot to mention that mouse is working badly, but think
It's be nice if there was some interrupt going nuts we could see in /proc/interrupts
making execessive latency.
How about the U-Boot / MLO pieces? They have nasty deps like gpu clock state and default
If the only clue is excess heat it can be something like a contended SoC GPIO.
this is not important now. I use XFCE edition of F21. Power adapter is
mA and I think that is OK also.
arm mailing list