From: Peter Robinson [mailto:email@example.com]
Sent: Saturday, October 29, 2016 4:52 AM
To: Timothy Krantz <tkrantz(a)stahurabrenner.com>
Subject: Re: [fedora-arm] Re: Jetson TK1 and kernel 4.8
>> > > > > Mine has as of yet failed to boot on any of them.
>> > > >
>> > > > Mine is currently running 4.8.1-1.fc25 without issues, just
>> > > > upgrading it to the latest now to test that too.
>> > >
>> > > Was running 4.8.2-300.fc25.armv7hl+lpae, upgraded to
>> > > 4.8.4-301.fc25 without any issues. Could you post output of your
>> > >
>> > > Paul
>> You might have better luck with a more recent version of U-Boot. I'm
>> running U-Boot 2016.11-rc2 with 4.8.4-301.fc25 on sata.
> That made sense to me so I upgraded to the uboot that you are using but
Do you have any extra peripherals added like a mPCIe card, camera or other
such things or is it just the base board? What device do you have the rootfs
on? eMMC, SD or SATA?
I have mine running as a bare device with the OS on the eMMC, I think Paul
might have the OS on a sata SSD. Just trying to work out what if any
differences there are here as there's not much that can be different.
Mine is yet another variation. It is a bare board with the boot partition on an SD card
and the root filesystem on an SSD. I left the original eMMC untouched until I upgraded
The only thing other than the SDcard and the SSD is the serial console.
Just for kicks I tried an LPAE kernel and the first time I booted it got some kenel oops
that I had not seen before but I was not logging the console output so I turned on capture
and tried again but have not seen that kernel oops since.
For some reason my board is not seeing the sata controller (or not getting it initialized
properly) on 4.7 and 4.8 kernels but does on 4.6.7.