On Mon, Dec 15, 2014 at 4:52 AM, Robert Brown
<rebrown(a)exemail.com.au> wrote:
> Found several log files with date 01/01/1970 (attached).
>
> /var/log/chrony was empty.
Would be until network comes up and chrony can start
> Messages log reports:
> EXYNOS: PMU not supported and
> edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
> edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
All spurious, for HW other than AllWinner
> fairly early on. And
>
> ahci-sunxi 1c18000.sata: PHY power up failed.
> ahci-sunxi: probe of 1c18000.sata failed with error -5
Do you have a SATA device attached?
No sata device attached.
> Generated key 1
> Fatal error : getpwnam(chrony) failed
> getpwnam(chrony) failed
>
> A search found all of these were empty:
>
> /media/rbrown/__/etc/systemd/user
> /media/rbrown/__/etc/xdg/systemd/user
> /media/rbrown/__/var/kerberos/krb5/user
> /media/rbrown/__/usr/share/perl5/User
> /media/rbrown/__/usr/lib/systemd/user
> /media/rbrown/__/run/user
>
> First things to check for?
Maybe I missed in it earlier posts but what A10 device are you using?
This is a
Rikomagic MK802II hdmi device. Trying to boot headless with no
serial console!
> On 15/12/14 08:57, Robert Brown wrote:
>> Found I had an error on writing u-boot so corrected that and after next
>> boot attempt found that a
>> __/var/log/journal/a1a25eeb66844538a8c8a85672fcaf38/system.journal file of
>> 8MB had been written. Looks like I have had a boot.
>> Bit clumsy trying to read this file but in among the gobblydegook it was
>> looking good and then (apologies for the long text):
>>
>> MESSAGE=Starting System Logging Service...
>> MESSAGE=can't open any entropy source
>> MESSAGE=Maybe RNG device modules are not loaded
>> MESSAGE=Failed to find user 'avahi'
>> MESSAGE=Starting OpenSSH Server Key Generation...
>> MESSAGE=Starting Login Service...
>> MESSAGE=Generated key 1
>> MESSAGE=Fatal error : getpwnam(chrony) failed
>> MESSAGE=Can't find user 'abrt': No such file or directory
>> MESSAGE=Could not get password database information for UID of current
>> process: User "???" unknown or no memory to allocate password entry
>> MESSAGE=Unknown username "pulse" in message bus configuration file
>> MESSAGE=Problem creating device name scan list
>> MESSAGE=In the system's table of devices NO devices found to scan
>> MESSAGE=Monitoring 0 ATA and 0 SCSI devices
>> MESSAGE=Unknown username "root" in message bus configuration file
>> MESSAGE=Unknown username "colord" in message bus configuration file
>> MESSAGE=Unknown group "lp" in message bus configuration file
>> MESSAGE=Unknown username "systemd-resolve" in message bus
configuration
>> file
>> SYSLOG_IDENTIFIER=sshd-keygen
>> MESSAGE=Generating SSH2 RSA host key: [FAILED]
>> MESSAGE=Unknown username "polkitd" in message bus configuration file
>> MESSAGE=Unknown username "avahi" in message bus configuration file
>> MESSAGE=Unknown username "rtkit" in message bus configuration file
>> MESSAGE=Failed to start message bus: Could not get UID and GID for
>> username "dbus"
>> MESSAGE=Failed to register match for Disconnected message: Connection
>> timed out
>> MESSAGE=Failed to add match for NameOwnerChanged: Connection timed out
>> MESSAGE=Started System Logging Service.
>> MESSAGE=Started Console System Startup Logging.
>> MESSAGE=firewalld.service: main process exited, code=exited,
>> status=1/FAILURE
>> MESSAGE=abrtd.service: main process exited, code=exited, status=1/FAILURE
>> MESSAGE=rngd.service: main process exited, code=exited, status=1/FAILURE
>> MESSAGE=avahi-daemon.service: main process exited, code=exited,
>> status=255/n/a
>> MESSAGE=Failed to start Avahi mDNS/DNS-SD Stack.
>> MESSAGE=Started Install ABRT coredump hook.
>> MESSAGE=chronyd.service: control process exited, code=exited status=1
>> MESSAGE=sshd-keygen.service: main process exited, code=exited,
>> status=1/FAILURE
>> MESSAGE=Failed to start OpenSSH Server Key Generation.
>> MESSAGE=systemd-logind.service: main process exited, code=exited,
>> status=1/FAILURE
>> MESSAGE=systemd-logind.service failed.
>> MESSAGE=dbus.service: main process exited, code=exited, status=1/FAILURE
>> MESSAGE=systemd-logind.service has no holdoff time, scheduling restart.
>> CMDLINE=/bin/xinit /bin/firstboot-windowmanager /bin/initial-setup --
>> /bin/Xorg :9 -ac -nolisten tcp
>> SYSTEMD_CGROUP=/system.slice/initial-setup-graphical.ser
>> MESSAGE=Kernel command line: ro
>> root=UUID=d072ca14-7c80-40e2-b291-a4eaa4837b0d console=ttyS0,115200
>> MESSAGE=rtkit-daemon.service start operation timed out. Terminating.
>>
>> A few service went into failed state from this but maybe all due to not
>> logging in?
>> Anyone have any clues for what I might be able to edit in the fs on the
>> card before a next boot attempt?
>>
>> Thanks for your patience.
>>
>> Rob
>>
>>
>>
>>
>>
>> No wireless connection being made as evidenced by nmap.
>>
>>
>> On 14/12/14 15:54, Robert Brown wrote:
>>> For the benefit of others this is about booting this device without
>>> having serial console or a monitor to view first boot prompts.
>>> On 14/12/14 11:27, Robert Moskowitz wrote:
>>>>
>>>> On 12/13/2014 01:52 AM, Robert Brown wrote:
>>>>>
>>>>> On 08/12/14 22:36, Robert Moskowitz wrote:
>>>>>> On 12/08/2014 06:30 AM, Robert Brown wrote:
>>>>>>> On 08/12/14 22:11, Robert Moskowitz wrote:
>>>>>>>> On 12/08/2014 05:16 AM, Robert Brown wrote:
>>>>>>>>> Thanks for the reply.
>>>>>>>>> On 08/12/14 14:43, Peter Robinson wrote:
>>>>>>>>>> On Fri, Dec 5, 2014 at 10:57 PM, Robert Brown
>>>>>>>>>> <rebrown(a)exemail.com.au> wrote:
>>>>>>>>>>> Anyone working on a FC21 image for the A10?
My device does not
>>>>>>>>>>> give me
>>>>>>>>>>> access to a serial monitor so am hoping to
change the dtb file
>>>>>>>>>>> for the A10
>>>>>>>>>>> on a remix build and get this unit booting on
3.17.
>>>>>>>>>>> Thanks
>>>>>>>>>> You don't mention what your device is but a
change in the .dtb
>>>>>>>>>> won't
>>>>>>>>>> fix the lack of display, there's a complete
lack of driver,
>>>>>>>>> Yes my wording could have been better.
>>>>>>>>> Changing the .dtb was only about getting the device
to boot as I
>>>>>>>>> realise hdmi is not yet ready.
>>>>>>>>> The device is a Rikomagic MK802II. Booting it
headless with 3.17 is
>>>>>>>>> my aim but the soldering job for a serial console is
a challenge beyond my
>>>>>>>>> soldering skills - see
>>>>>>>>>
http://www.rikomagic.co.uk/forum/viewtopic.php?f=6&t=2488
>>>>>>>>> so am hoping some-one with a compatible device such
as Mele A1000
>>>>>>>>> or CB1 could develop an image. A howto for the build
and to get wireless
>>>>>>>>> configured for an ssh connection is an alternative.
>>>>>>>>
>>>>>>>> You could just try booting without serial console if you
provide
>>>>>>>> --norootpass on building the SD card. SSHD permits
logging in as root, just
>>>>>>>> don't do this on the Internet, as you are sitting
wide open!
>>>>>>> I think I would need to manually configure and select my
local
>>>>>>> network SSID and passphrase to get it on the network so I can
ssh to it. A
>>>>>>> new world for me under systemd.
>>>>>>
>>>>>> After first boot, you can see what interface name it used, the
create
>>>>>> an appropriate ifcfg- file. They still work.
>>>>>>
>>>>>>>> Thinking about the firstboot script the only really
needed things it
>>>>>>>> does is set the timezone and root password. You can add
your user after
>>>>>>>> logging in as root.
>>>>>>>>
>>>>>>>> I would suspect that if no serial console, it just comes
up as ready
>>>>>>>> as possible. All you need is your WiFi to be working;
that is a pretty big
>>>>>>>> assumption. You might have to get a supported ethernet
dongle.
>>>>>>> As above.
>>>>>>>>
>>>>>>>> What has happened in booting without a serial console so
far?
>>>>>>> I am running blind so I either see a new connection open up
when I do
>>>>>>> an nmap search from my PC or more likely there is no new
connection for the
>>>>>>> reasons I mention. The real trick is to know if I have even
had a successful
>>>>>>> boot.
>>>>>>
>>>>>> What else are you going to do right now but try?
>>>>> So on my attempts using Fedora-LXDE-armhfp-21-5-sda.raw.xz written
to
>>>>> the sdcard using the manual instructions here
>>>>>
https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation
>>>>> including writing the appropriate u-boot to the media
>>>>>
>>>>> and setting up wpa using tips from
>>>>>
http://wiki.centos.org/HowTos/Laptops/WpaSupplicant with edits of
>>>>> /etc/wpa_supplicant/wpa_supplicant.conf and
>>>>> /etc/sysconfig/network-scripts/ifcfg-wlan0
>>>>
>>>> Do you know what ethernet name is being used? Since your WiFi is a USB
>>>> dongle, there are a lot of possiblities. All the more reason for
>>>> journalctl.
>>>>
>>>> If you know the MAC address you can create:
>>>>
>>>> /etc/udev/rules.d/70-persistent-net.rules
>>>>
>>>> SUBSYSTEM=="net", ACTION=="add",
DRIVERS=="?*",
>>>> ATTR{address}=="02:c3:04:01:77:c3", ATTR{type}=="1",
KERNEL=="eth*",
>>>> NAME="wlan0"
>>>>
>>>> This will 'fix' the name you need for ifcfg-wlan0
>>> I will have ago at this but atm I don't think I am getting far into the
>>> boot. Certainly does not seem to be logging in. Not sure if networking can
>>> be enabled prior to login to allow ssh connection.
>>>>
>>>>> I don't believe the boot is getting very far as messages in
/var/log is
>>>>> empty.
>>>>
>>>> No /var/log/messages anymore. It is all journalctl. Look in that
>>>> directory.
>>>
>>> From my reading on journalctl I have not seen how to view any logs it may
>>> have created. /var/log contains a folder named journal but this is also
>>> empty so maybe same conclusion.
>>>>
>>>>> Maybe because I am not yet logged in. Tried setting autologin in
>>>>> lxdm.conf.
>>>>
>>>> Would not know about lxdm.conf
>>> Yes I have considered using Minimal or xfce instead.
>>>
>> _______________________________________________
>> arm mailing list
>> arm(a)lists.fedoraproject.org
>>
https://admin.fedoraproject.org/mailman/listinfo/arm
>
>
> _______________________________________________
> arm mailing list
> arm(a)lists.fedoraproject.org
>
https://admin.fedoraproject.org/mailman/listinfo/arm