Hello All,
FYI. After my previous successes (see thread below) I earlier this week
performed an upgrade on my Odroid XU4 to the latest version of Rawhide
Mate Spin. For some reason, once again, although the system boots, it
no longer boots into graphical mode, complaining of a UDEV issue. This
is the same problem it seems I was running into with the latest updates
of F27 and why I switched over to the Rawhide releases with the newer
kernel. With the updated software, my Odroid boots into graphical mode
if I use the previously installed 4.16.0-0.rc3 kernel, but not with the
newer kernel.
I will upgrade it again to the latest rawhide release and post the log
of that, should I still have issues.
Stewart
On 03/04/2018 08:10 PM, Stewart Samuels wrote:
Hello All,
I am happy to report that the latest Rawhide spin
"Fedora-Mate-armhfp-Rawhide-20180301.n.0-sda.raw.xz
<
https://mirrors.rit.edu/fedora/fedora/linux/development/rawhide/Spins/arm...
seems to be working correctly now for the Odroid XU4. The system
boots into graphical mode and the USB 3 issues seem to be working as
well. This version of spins is using the 4.16.0-0.rc3 kernel.
Stewart
On 02/24/2018 09:09 AM, Stewart Samuels wrote:
> No. No other messages follow. The system freezes at this point.
>
> Stewart
>
> On 02/24/2018 04:07 AM, Peter Robinson wrote:
>> On Sat, Feb 24, 2018 at 4:40 AM, Stewart Samuels
>> <searider74(a)gmail.com> wrote:
>>> I just got a chance to test the 4.16.0-0.rc2 kernel using the
>>> 20180220 Xfce
>>> Rawhide Spin. It fails to boot due to a kernel paging request.
>>> Here are
>>> the snippets:
>>>
>>> [ 8.028149] Unable to handle kernel paging request at virtual
>>> address fffffffc
>> Wow kernel, thanks, it's very useful :-/
>>
>> Was there any further output after this? The kernel would normally
>> spit out a full traceback right after this line.
>>
>> There's some fixes for the exynos landed for rc3 so might be worth
>> trying that one when it lands next week.
>>
>> P
>>
>>
>>> Stewart
>>>
>>>
>>>
>>>
>>>
>>> On 02/22/2018 12:01 PM, Peter Robinson wrote:
>>>
>>> On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels
>>> <searider74(a)gmail.com>
>>> wrote:
>>>
>>> On 02/22/2018 11:39 AM, Peter Robinson wrote:
>>>
>>> On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels
>>> <searider74(a)gmail.com>
>>> wrote:
>>>
>>> Hi Peter,
>>>
>>> I just got a chance to update my Odroid Xu4 with the latest updates
>>> for
>>> F27.
>>> All was working fine with the exceptions for the Exynos 5 USB-3 issues
>>> prior
>>> to this upgrade. After the upgrade and a reboot, my system no longer
>>> boots
>>> into graphics mode. It seems to be failing somewhere along the
>>> line with
>>> udev, but I am not certain of this. The system will eventually
>>> boot into
>>> non-graphics mode, which can be seen when connecting the serial
>>> port and
>>> watching the boot messages.
>>>
>>> As I mentioned in previous posts, the Rawhide Spins all seem to
>>> have this
>>> issue too. In fact, they have had the problem for a long time
>>> now. On
>>> the
>>> positive side, both this release of F27 updates and the Rawhide
>>> spins do
>>> seem to have the USB-3 issues fixed.
>>>
>>> Can you try the 4.16rc2 kernel [1] and see if that has the same
>>> issues. The 4.16 kernel might help as there was a bunch of stuff that
>>> changed in the exynos drm driver.
>>>
>>>
https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
>>>
>>> Looking at the builds in this URL I see "rawhide" listed as one of
the
>>> "Tasks". Doe this mean the current rawhide build are already
>>> including the
>>> kernel-4.16.0-0.rc2 kernel?
>>>
>>> Yes, and the just branched F-28 will as well. So you can do an upgrade
>>> to F-28 and get it there too
>>>
>>> Attached, is a MS Word formatted file of my boot log. Hope this
>>> helps.
>>>
>>> Please don't do that, word processing docs are really not the way to
>>> handle this in open source just fpaste it or something. If it's booted
>>> just do "dmesg | fpaste" and provide the URL.
>>>
>>> Regards,
>>> Stewart
>>>
>>>
>>> On 02/12/2018 09:56 AM, Peter Robinson wrote:
>>>
>>> Hi All,
>>>
>>> Just a heads up that the 4.15 kernel is headed to stable releases.
>>>
>>> I did a bunch of testing over the weekend and fixed up a bunch of
>>> issues, added some minor enhancements across a number of platforms.
>>> There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
>>> for people to test, I expect a 4.15.3 kernel going to updates-testing
>>> later today or tomorrow.
>>>
>>> A few notes for the fixes I added:
>>> * fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
>>> * Crypto/rng engine on some AllWinner devices now loads/works
>>> (A10/A143/A20 at least, I suspect more will come with later kernels)
>>> * Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
>>> * A bunch of improvements for monitor detection on the Raspberry Pi
>>> * Ethernet driver more stable on AllWInner A64/H5 platforms (like
>>> Pine64)
>>> * Numerous other upstream fixes improvements that headed upstream
>>> * 4.15.3 (not in the build above) will include aarch64 fixes for
>>> Spectre/Meltdown.
>>>
>>> So please test and feel free to reply to this thread with any new
>>> issues you see with the 4.15 series, or any positive results.
>>>
>>> [1]
https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>>>
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>