Hello Vince,

I have used your input to get my Odorid Xu4 to both blink and use all 8 cores now.  Thanks for the work you did to get that working.  However, unlike Andreas, my Driver r8152 still shows 480M.  I am using the latest 4.17.18-200 kernel.  See my output that follows:

Last login: Tue Aug 28 10:49:22 2018
[root@myodroid-wireless ~]#
[root@myodroid-wireless ~]#
[root@myodroid-wireless ~]# uname -a
Linux myodroid-wireless 4.17.18-200.fc28.armv7hl #1 SMP Wed Aug 22 20:36:45 UTC 2018 armv7l armv7l armv7l GNU/Linux
[root@myodroid-wireless ~]#
[root@myodroid-wireless ~]# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M
            |__ Port 1: Dev 4, If 0, Class=Hub, Driver=hub/4p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
            |__ Port 1: Dev 5, If 0, Class=Hub, Driver=hub/4p, 480M
                |__ Port 2: Dev 6, If 0, Class=Hub, Driver=hub/4p, 12M
                    |__ Port 4: Dev 9, If 2, Class=Human Interface Device, Driver=usbhid, 12M
                    |__ Port 4: Dev 9, If 0, Class=Human Interface Device, Driver=usbhid, 12M
                    |__ Port 4: Dev 9, If 1, Class=Human Interface Device, Driver=usbhid, 12M
                    |__ Port 2: Dev 8, If 1, Class=Wireless, Driver=btusb, 12M
                    |__ Port 2: Dev 8, If 0, Class=Wireless, Driver=btusb, 12M
                    |__ Port 1: Dev 7, If 2, Class=Human Interface Device, Driver=usbhid, 12M
                    |__ Port 1: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
                    |__ Port 1: Dev 7, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 4, If 0, Class=Vendor Specific Class, Driver=rtl8192cu, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
[root@myodroid-wireless ~]#

Also, it looks that although 8 cores are now being used, the cpu frequency is set to "ondemand" governor at 700 MHz.  You can change that to 1.3 GHz by changing the governor to "performance".  But I is not persistent between boots. Perhaps someone can provide some assistance in how to make it persistent between boots.  Anyway, here is what I did to change the governor.

 [root@myodroid-wireless ~]# cpupower frequency-info
analyzing CPU 0:
  driver: cpufreq-dt
  CPUs which run at the same hardware frequency: 0 1 2 3
  CPUs which need to have their frequency coordinated by software: 0 1 2 3
  maximum transition latency: 154 us
  hardware limits: 200 MHz - 1.30 GHz
  available frequency steps:  200 MHz, 300 MHz, 400 MHz, 500 MHz, 600 MHz, 700 MHz, 800 MHz, 900 MHz, 1000 MHz, 1.10 GHz, 1.20 GHz, 1.30 GHz
  available cpufreq governors: conservative userspace powersave ondemand performance schedutil
  current policy: frequency should be within 200 MHz and 1.30 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency: 700 MHz (asserted by call to hardware)
 [root@myodroid-wireless ~]#
 [root@myodroid-wireless ~]#
 [root@myodroid-wireless ~]# cpupower frequency-info --governors
analyzing CPU 0:
  available cpufreq governors: conservative userspace powersave ondemand performance schedutil
[root@myodroid-wireless ~]# cpupower frequency-set --governor performance
Setting cpu: 0
Setting cpu: 1
Setting cpu: 2
Setting cpu: 3
Setting cpu: 4
Setting cpu: 5
Setting cpu: 6
Setting cpu: 7
[root@myodroid-wireless ~]# cpupower frequency-info
analyzing CPU 0:
  driver: cpufreq-dt
  CPUs which run at the same hardware frequency: 0 1 2 3
  CPUs which need to have their frequency coordinated by software: 0 1 2 3
  maximum transition latency: 154 us
  hardware limits: 200 MHz - 1.30 GHz
  available frequency steps:  200 MHz, 300 MHz, 400 MHz, 500 MHz, 600 MHz, 700 MHz, 800 MHz, 900 MHz, 1000 MHz, 1.10 GHz, 1.20 GHz, 1.30 GHz
  available cpufreq governors: conservative userspace powersave ondemand performance schedutil
  current policy: frequency should be within 200 MHz and 1.30 GHz.
                  The governor "performance" may decide which speed to use
                  within this range.
  current CPU frequency: 1.30 GHz (asserted by call to hardware)

So, although we might be able to get to 1.30 GHz, the A15 Cortex frequency is suppose to be 2.0 GHz and the A7 Cortex process 1.4 GHz.
Does anyone know if I am missing something here?  I will check to see what Ubuntu 18.04 for the Odroid XU4 and report back later.

Stewart


On 08/27/2018 03:43 AM, arm_ml@rirasoft.de wrote:
Am 2018-08-27 10:41, schrieb Vince Geze:
---snip---

Hello Vince,
after newest kernel update and poweroff for 1 minute:

[root@odroidh2 ~]# lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
     |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
     |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
[root@odroidh2 ~]# uname -a
Linux odroidh2.reschke.lan 4.17.17-200.fc28.armv7hl #1 SMP Mon Aug 20
17:31:32 UTC 2018 armv7l armv7l armv7l GNU/Linux
[root@odroidh2 ~]#

Greetings
Andreas

Hi Andreas,

Thanks for the feedback, looks like both storage and Ethernet are
connected as USB3 now.
Out of curiosity, are you running from SD or eMMC? I'm still using SD
for testing, but once I got everything covered I'd like to switch to
eMMC.

Best regards,

Vince

Hello Vince,
this system is running only with /boot from SD, all other filesystems are on SSD.

I will now update my Odroid XU4, this should also work. I hope, I can take this in the near future as my working place.

Greetings
Andreas
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org