[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.56-udooneo-02054-gc460cad (udooer@udoocompiler) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3) ) #4 SMP PREEMPT Thu Jun 15 13:32:59 UTC 2017 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: UDOO Neo Full [ 0.000000] Reserved memory: reserved region for node 'm4@0x84000000': base 0x84000000, size 8 MiB [ 0.000000] Reserved memory: reserved region for node 'm4@0xBFF00000': base 0xbff00000, size 1 MiB [ 0.000000] cma: CMA: reserved 320 MiB at aa000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 259840 [ 0.000000] free_area_init_node: node 0, pgdat 80abbc40, node_mem_map bf657000 [ 0.000000] DMA zone: 2048 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 259840 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @bf639000 s8256 r8192 d16320 u32768 [ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257792 [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 uart_from_osc clk_ignore_unused cpuidle.off=1 consoleblank=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 690500K/1039360K available (4911K kernel code, 284K rwdata, 5516K rodata, 244K init, 384K bss, 348860K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x80a36e3c (10428 kB) [ 0.000000] .init : 0x80a37000 - 0x80a74040 ( 245 kB) [ 0.000000] .data : 0x80a76000 - 0x80abd0a0 ( 285 kB) [ 0.000000] .bss : 0x80abd0ac - 0x80b1d43c ( 385 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L310 cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 256 kB [ 0.000000] Switching to timer-based delay loop [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns [ 0.000833] clocksource_of_init: no matching clocksources found [ 0.000994] Console: colour dummy device 80x30 [ 0.001018] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001030] pid_max: default: 32768 minimum: 301 [ 0.001173] Security Framework initialized [ 0.001232] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.007256] device-tree: Duplicate name in /soc/aips-bus@02200000/spba-bus@02200000/lcdif@02220000, renamed to "display#1" [ 0.009455] Initializing cgroup subsys devices [ 0.009474] Initializing cgroup subsys freezer [ 0.009521] CPU: Testing write buffer coherency: ok [ 0.009806] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.009845] Setting up static identity map for 0x804abd10 - 0x804abd68 [ 0.040362] Brought up 1 CPUs [ 0.040378] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.040388] CPU: All CPU(s) started in SVC mode. [ 0.040997] devtmpfs: initialized [ 0.044743] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.045067] pinctrl core: initialized pinctrl subsystem [ 0.045419] regulator-dummy: no parameters [ 0.061813] NET: Registered protocol family 16 [ 0.069092] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.069767] Use WDOG1 as reset source [ 0.075208] GPIO mask to reserved irq for M4 Core = 0x00000350 [ 0.075960] GPIO mask to reserved irq for M4 Core = 0x003cf000 [ 0.076725] GPIO mask to reserved irq for M4 Core = 0x000c0000 [ 0.078741] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered [ 0.079059] vdd1p1: 800 <--> 1375 mV at 1100 mV [ 0.079437] vdd3p0: 2800 <--> 3150 mV at 3000 mV [ 0.079791] vdd2p5: 2100 <--> 2875 mV at 2500 mV [ 0.080163] cpu: 725 <--> 1450 mV [ 0.080606] vddpcie-phy: 725 <--> 1450 mV [ 0.080986] vddsoc: 725 <--> 1450 mV [ 0.082949] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered [ 0.085659] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered [ 0.086092] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered [ 0.091162] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.091175] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.092311] imx6sx-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.093195] 20dc000.gpc supply pu not found, using dummy regulator [ 0.093969] MU is ready for cross core communication! [ 0.100266] bio: create slab at 0 [ 0.102730] mxs-dma 1804000.dma-apbh: initialized [ 0.103431] vref-3v3: 3300 mV [ 0.103674] PSU-5V0: 5000 mV [ 0.103975] usb_otg1_vbus: 5000 mV [ 0.104322] usb_otg2_vbus: 5000 mV [ 0.104563] wlan-en-regulator: 1800 mV [ 0.105410] SCSI subsystem initialized [ 0.105702] usbphy_nop1.12 supply vcc not found, using dummy regulator [ 0.107029] i2c i2c-0: IMX I2C adapter registered [ 0.108784] i2c i2c-1: IMX I2C adapter registered [ 0.109540] i2c i2c-2: IMX I2C adapter registered [ 0.110834] i2c i2c-3: IMX I2C adapter registered [ 0.110957] Linux video capture interface: v2.00 [ 0.111027] pps_core: LinuxPPS API ver. 1 registered [ 0.111036] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.111060] PTP clock support registered [ 0.111622] Advanced Linux Sound Architecture Driver Initialized. [ 0.112679] Loading modules backported from Linux version v4.1.7-0-g0c5c1f1 [ 0.112691] Backport integrated by backports.git v4.1.1-1-0-g8286954 [ 0.112871] Switched to clocksource mxc_timer1 [ 0.123429] NET: Registered protocol family 2 [ 0.124317] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.124401] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.124530] TCP: Hash tables configured (established 8192 bind 8192) [ 0.124606] TCP: reno registered [ 0.124621] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.124659] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.124927] NET: Registered protocol family 1 [ 0.125249] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.126782] Bus freq driver module loaded [ 0.127558] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.134710] VFS: Disk quotas dquot_6.5.2 [ 0.135013] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.136907] msgmni has been set to 1988 [ 0.140812] io scheduler noop registered [ 0.140826] io scheduler deadline registered [ 0.140872] io scheduler cfq registered (default) [ 0.141361] imx-weim 21b8000.weim: Driver registered. [ 0.143184] MIPI DSI driver module loaded [ 0.273712] tda19988 2-0034: Sucessfully initialised chip revision 301 [ 0.284716] mxsfb 2220000.lcdif: failed to find mxc display driver [ 0.285250] DISPLAY: Power-on latency exceeded, new value 495334 ns [ 0.287176] DISPLAY: Power-off latency exceeded, new value 497000 ns [ 0.304658] Console: switching to colour frame buffer device 160x45 [ 0.348696] tda19988 2-0034: Matching CEA mode is 4 for fb mode 1280x720-60 [ 0.398986] DISPLAY: Power-off latency exceeded, new value 498666 ns [ 0.401613] mxsfb 2220000.lcdif: initialized [ 0.404647] imx-sdma 20ec000.sdma: no iram assigned, using external mem [ 0.404968] imx-sdma 20ec000.sdma: no event needs to be remapped [ 0.405208] imx-sdma 20ec000.sdma: loaded firmware 3.1 [ 0.408227] imx-sdma 20ec000.sdma: initialized [ 0.409911] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 0.410480] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 0.410493] pfuze100-regulator 0-0008: pfuze3000 found. [ 0.411952] SW1A: 700 <--> 1475 mV at 1175 mV [ 0.413299] SW1B: 700 <--> 1475 mV at 1175 mV [ 0.414098] SW2: 1500 <--> 1850 mV at 1800 mV [ 0.414860] SW3: 900 <--> 1650 mV at 1350 mV [ 0.415608] SWBST: 5000 <--> 5150 mV at 5000 mV [ 0.416377] VSNVS: 1000 <--> 3000 mV at 3000 mV [ 0.416564] VREFDDR: 750 mV [ 0.417314] VLDO1: 1800 <--> 3300 mV at 1800 mV [ 0.418080] VLDO2: 800 <--> 1550 mV at 1500 mV [ 0.418825] VCCSD: 2850 <--> 3300 mV at 3150 mV [ 0.419582] V33: 2850 <--> 3300 mV at 3150 mV [ 0.420333] VLDO3: 1800 <--> 3300 mV at 1800 mV [ 0.421504] VLDO4: 1800 <--> 3300 mV at 1800 mV [ 0.421858] Serial: IMX driver [ 0.422194] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 1500000) is a IMX [ 1.230241] console [ttymxc0] enabled [ 1.234770] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 1500000) is a IMX [ 1.243854] serial: Freescale lpuart driver [ 1.249436] imx sema4 driver is registered. [ 1.254102] Installing ttyMCC driver! [ 1.257832] [ 1.257832] A9 ttyMCC prepares to run, MCC version is 002.000 [ 1.265169] IMX MCC TTY driver module loaded [ 1.269508] [drm] Initialized drm 1.1.0 20060810 [ 1.274605] [drm] Initialized vivante 1.0.0 20120216 on minor 0 [ 1.285247] loop: module loaded [ 1.291308] 2188000.ethernet supply phy not found, using dummy regulator [ 1.333319] pps pps0: new PPS source ptp0 [ 1.342439] libphy: fec_enet_mii_bus: probed [ 1.347445] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.353853] mousedev: PS/2 mouse device common for all mice [ 1.360321] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0 [ 1.370788] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed [ 1.378209] i2c /dev entries driver [ 1.382507] IR NEC protocol handler initialized [ 1.387131] IR RC5(x) protocol handler initialized [ 1.391935] IR RC6 protocol handler initialized [ 1.396501] IR JVC protocol handler initialized [ 1.401041] IR Sony protocol handler initialized [ 1.405679] IR RC5 (streamzap) protocol handler initialized [ 1.411257] IR SANYO protocol handler initialized [ 1.415982] IR MCE Keyboard/mouse protocol handler initialized [ 1.423836] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) [ 1.432338] sdhci: Secure Digital Host Controller Interface driver [ 1.438576] sdhci: Copyright(c) Pierre Ossman [ 1.442962] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.449658] mmc0: no vqmmc regulator found [ 1.453824] mmc0: no vmmc regulator found [ 1.502903] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.512693] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.526374] mmc2: no vqmmc regulator found [ 1.571417] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.585886] mmc0: new high speed SDHC card at address 0007 [ 1.591867] mmcblk0: mmc0:0007 SD4GB 3.70 GiB [ 1.597972] mmcblk0: p1 p2 [ 1.652891] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.662671] galcore: clk_get 2d core clock failed, disable 2d/vg! [ 1.662701] Galcore version 5.0.11.25762 [ 1.676856] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range [ 1.715246] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 1.734217] mmc2: new high speed SDIO card at address 0001 [ 1.910741] fsl-asrc 2034000.asrc: driver registered [ 1.921816] imx-tda19988 sound_hdmi.25: tda19988-codec <-> 202c000.ssi mapping ok [ 1.930588] nf_conntrack version 0.5.0 (15909 buckets, 63636 max) [ 1.937390] TCP: cubic registered [ 1.940728] NET: Registered protocol family 17 [ 1.945271] Key type dns_resolver registered [ 1.950301] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) [ 1.972917] failed to register cpuidle driver [ 1.977294] ThumbEE CPU extension supported. [ 1.982136] VLDO2: disabling [ 1.985541] SWBST: disabling [ 1.988435] usb_otg2_vbus: disabling [ 1.992017] usb_otg1_vbus: disabling [ 1.995763] PSU-5V0: disabling [ 1.998854] vref-3v3: disabling [ 2.002028] regulator-dummy: disabling [ 2.006752] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.013953] imx_thermal tempmon.11: Extended Commercial CPU temperature grade [ 2.021104] imx_thermal tempmon.11: max:105C crit:100C passive:95C [ 2.035680] clk: Not disabling unused clocks [ 2.039977] ALSA device list: [ 2.043070] #0: imx-audio-tda19988 [ 5.840054] random: nonblocking pool is initialized [ 9.041614] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [ 9.047341] EXT4-fs (mmcblk0p2): recovery complete [ 9.567714] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 9.576028] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 9.582286] devtmpfs: mounted [ 9.585819] Freeing unused kernel memory: 244K (80a37000 - 80a74000) [ 11.064987] init: mounted-proc main process (99) terminated with status 1 [ 12.141922] systemd-udevd[211]: starting version 204 [ 12.357241] fuse init (API version 7.22) [ 12.531226] (stk) :sysfs entries created [ 12.531270] (stk) : debugfs entries created [ 12.651064] Bluetooth: Core ver 2.20 [ 12.651685] NET: Registered protocol family 31 [ 12.651699] Bluetooth: HCI device and connection manager initialized [ 12.651723] Bluetooth: HCI socket layer initialized [ 12.651734] Bluetooth: L2CAP socket layer initialized [ 12.651777] Bluetooth: SCO socket layer initialized [ 12.658364] hdev a860f000 [ 12.675669] HCI device registered (hdev a860f000) [ 12.676886] hci0 a860f000 [ 12.676901] (stc): chnl_id list empty :4 [ 12.676908] (stk) : st_kim_start(stk) :ldisc_install = 1 [ 13.037726] usbcore: registered new interface driver usbfs [ 13.037906] usbcore: registered new interface driver hub [ 13.046605] usbcore: registered new device driver usb [ 13.060755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.096918] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator [ 13.175662] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 13.175706] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 13.192952] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 13.194140] hub 1-0:1.0: USB hub found [ 13.194199] hub 1-0:1.0: 1 port detected [ 13.381174] tsl2563 1-0029: detect error 5 [ 13.422390] tsl2563: probe of 1-0029 failed with error -5 [ 13.422905] lm75: probe of 1-0048 failed with error -5 [ 13.423341] si70xx: probe of 1-0040 failed with error -5 [ 13.423682] mpl3115: probe of 1-0060 failed with error -5 [ 13.542032] input: FreescaleAccelerometer as /devices/virtual/input/input1 [ 13.549992] input: FreescaleMagnetometer as /devices/virtual/input/input2 [ 13.577029] fxos8700_probe succ [ 13.578378] input: FreescaleGyroscope as /devices/virtual/input/input3 [ 13.579252] fxas2100x device driver probe successfully [ 13.647865] CSI: Registered sensor subdevice: fsl_vadc [ 13.672944] wait vadc auto detect video mode.... [ 13.782922] (stk) :ldisc installation timeout [ 13.787123] (stk) :ldisc_install = 0<6>[ 14.092946] video mode NTSC [ 14.092951] vadc driver loaded [ 14.452085] cfg80211: Calling CRDA to update world regulatory domain [ 14.772685] cfg80211: World regulatory domain updated: [ 14.772700] cfg80211: DFS Master region: unset [ 14.772706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.772718] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.772726] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.772734] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 14.772744] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 14.772753] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 14.772761] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 14.772768] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 14.772776] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 14.782954] (stk) : timed out waiting for ldisc to be un-installed [ 14.898698] (stk) :ldisc_install = 1<6>[ 14.911533] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 14.935806] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [ 14.935819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935827] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [ 14.935834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935840] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [ 14.935847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935854] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [ 14.935860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935866] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [ 14.935872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935878] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [ 14.935884] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935890] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [ 14.935896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935902] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [ 14.935909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935914] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [ 14.935921] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935927] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [ 14.935934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935939] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [ 14.935945] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935951] cfg80211: Updating information on frequency 2467 MHz with regulatory rule: [ 14.935958] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935963] cfg80211: Updating information on frequency 2472 MHz with regulatory rule: [ 14.935969] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 14.935975] cfg80211: Updating information on frequency 2484 MHz with regulatory rule: [ 14.935981] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm) [ 14.935989] cfg80211: Disabling freq 5040 MHz [ 14.935994] cfg80211: Disabling freq 5060 MHz [ 14.935999] cfg80211: Disabling freq 5080 MHz [ 14.936004] cfg80211: Disabling freq 5170 MHz [ 14.936011] cfg80211: Updating information on frequency 5180 MHz with regulatory rule: [ 14.936018] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936025] cfg80211: Updating information on frequency 5190 MHz with regulatory rule: [ 14.936032] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936039] cfg80211: Updating information on frequency 5200 MHz with regulatory rule: [ 14.936047] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936054] cfg80211: Updating information on frequency 5210 MHz with regulatory rule: [ 14.936060] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936067] cfg80211: Updating information on frequency 5220 MHz with regulatory rule: [ 14.936073] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936081] cfg80211: Updating information on frequency 5230 MHz with regulatory rule: [ 14.936087] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936093] cfg80211: Updating information on frequency 5240 MHz with regulatory rule: [ 14.936101] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936108] cfg80211: Updating information on frequency 5260 MHz with regulatory rule: [ 14.936114] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936121] cfg80211: Updating information on frequency 5280 MHz with regulatory rule: [ 14.936128] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936135] cfg80211: Updating information on frequency 5300 MHz with regulatory rule: [ 14.936141] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936148] cfg80211: Updating information on frequency 5320 MHz with regulatory rule: [ 14.936154] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm) [ 14.936160] cfg80211: Updating information on frequency 5500 MHz with regulatory rule: [ 14.936167] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936173] cfg80211: Updating information on frequency 5520 MHz with regulatory rule: [ 14.936179] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936186] cfg80211: Updating information on frequency 5540 MHz with regulatory rule: [ 14.936192] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936200] cfg80211: Updating information on frequency 5560 MHz with regulatory rule: [ 14.936206] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936212] cfg80211: Updating information on frequency 5580 MHz with regulatory rule: [ 14.936218] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936224] cfg80211: Updating information on frequency 5600 MHz with regulatory rule: [ 14.936230] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936236] cfg80211: Updating information on frequency 5620 MHz with regulatory rule: [ 14.936242] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936247] cfg80211: Updating information on frequency 5640 MHz with regulatory rule: [ 14.936254] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936259] cfg80211: Updating information on frequency 5660 MHz with regulatory rule: [ 14.936266] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936271] cfg80211: Updating information on frequency 5680 MHz with regulatory rule: [ 14.936278] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936284] cfg80211: Updating information on frequency 5700 MHz with regulatory rule: [ 14.936290] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm) [ 14.936296] cfg80211: Updating information on frequency 5745 MHz with regulatory rule: [ 14.936302] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm) [ 14.936308] cfg80211: Updating information on frequency 5765 MHz with regulatory rule: [ 14.936314] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm) [ 14.936320] cfg80211: Updating information on frequency 5785 MHz with regulatory rule: [ 14.936326] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm) [ 14.936332] cfg80211: Updating information on frequency 5805 MHz with regulatory rule: [ 14.936338] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm) [ 14.936345] cfg80211: Updating information on frequency 5825 MHz with regulatory rule: [ 14.936351] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm) [ 14.955902] wlcore: loaded [ 14.955940] wlcore: driver version: v3.14.56-2054-gc460cad [ 15.095796] using random self ethernet address [ 15.095814] using random host ethernet address [ 15.095823] using host ethernet address: 4e:71:9d:8c:3f:d7 [ 15.095829] using self ethernet address: 4e:71:9e:8c:3f:d7<6>[ 15.222251] Number of LUNs=8 [ 15.222268] Mass Storage Function, version: 2009/09/11 [ 15.222278] LUN: removable file: (no medium) [ 15.222293] Number of LUNs=1 [ 15.222390] LUN: removable file: /dev/mmcblk0p1 [ 15.222401] Number of LUNs=1 [ 15.223013] usb0: HOST MAC 4e:71:9d:8c:3f:d7 [ 15.223056] usb0: MAC 4e:71:9e:8c:3f:d7 [ 15.232716] g_multi gadget: Multifunction Composite Gadget [ 15.232728] g_multi gadget: g_multi ready [ 15.892941] (stk) :ldisc installation timeout [ 15.897303] (stk) :ldisc_install = 0<6>[ 16.510116] NET: Registered protocol family 10 [ 16.708971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.708982] Bluetooth: BNEP filters: protocol multicast [ 16.709011] Bluetooth: BNEP socket layer initialized [ 16.892933] (stk) : timed out waiting for ldisc to be un-installed [ 17.006026] (stk) :ldisc_install = 1(stc): st_tty_open [ 17.057464] (stk) :line discipline installed(stk) :TIInit_11.8.32.bts [ 17.063853] (stk) :change remote baud rate command in firmware(stk) :invalid action after change remote baud command [ 17.180886] Bluetooth: RFCOMM TTY layer initialized [ 17.181113] Bluetooth: RFCOMM socket layer initialized [ 17.181149] Bluetooth: RFCOMM ver 1.11 [ 18.059546] gyro enable setting active [ 18.217096] (stc): add_channel_to_table: id 4 [ 18.217113] (stc): add_channel_to_table: id 2 [ 18.217120] (stc): add_channel_to_table: id 3 [ 18.220556] hci0: type 1 len 4 [ 18.221128] hci0: type 1 len 4 [ 18.221737] hci0: type 1 len 4 [ 18.222396] hci0: type 1 len 4 [ 18.223714] hci0: type 1 len 4 [ 18.224264] hci0: type 1 len 4 [ 18.224739] hci0: type 1 len 4 [ 18.227807] hci0: type 1 len 4 [ 18.228432] hci0: type 1 len 4 [ 18.228871] hci0: type 1 len 4 [ 18.229342] hci0: type 1 len 5 [ 18.229935] hci0: type 1 len 6 [ 18.230381] hci0: type 1 len 4 [ 18.230869] hci0: type 1 len 4 [ 18.231411] hci0: type 1 len 4 [ 18.231956] hci0: type 1 len 4 [ 18.232431] hci0: type 1 len 4 [ 18.232943] hci0: type 1 len 4 [ 18.234088] hci0: type 1 len 245 [ 18.237282] hci0: type 1 len 5 [ 18.238135] hci0: type 1 len 4 [ 18.238585] hci0: type 1 len 5 [ 18.239100] hci0: type 1 len 12 [ 18.239600] hci0: type 1 len 11 [ 18.240150] hci0: type 1 len 6 [ 18.240574] hci0: type 1 len 4 [ 18.241033] hci0: type 1 len 4 [ 18.241462] hci0: type 1 len 12 [ 18.242028] hci0: type 1 len 4 [ 18.242518] hci0: type 1 len 11 [ 18.243491] hci0: type 1 len 4 [ 18.309251] hci0: type 1 len 5 [ 18.310125] hci0: type 1 len 6 [ 18.310714] hci0: type 1 len 36 [ 18.311515] hci0: type 1 len 36 [ 18.313120] hci0: type 1 len 5 [ 18.313676] hci0: type 1 len 7 [ 18.314143] hci0: type 1 len 252 [ 18.317853] hci0: type 1 len 245 [ 18.484756] init: avahi-cups-reload main process (639) terminated with status 1 [ 19.529216] init: failsafe main process (669) killed by TERM signal [ 20.130179] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 22.703134] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) [ 22.703582] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.433658] wlcore: PHY firmware version: Rev 8.2.0.0.233 [ 23.486870] wlcore: firmware booted (Rev 8.9.0.1.55) [ 23.508725] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.567824] wlan0: authenticate with a0:f3:c1:5e:ad:cb [ 25.567843] wlan0: Allocated STA a0:f3:c1:5e:ad:cb [ 25.609820] wlan0: Inserted STA a0:f3:c1:5e:ad:cb [ 25.609841] wlan0: send auth to a0:f3:c1:5e:ad:cb (try 1/3) [ 25.624297] wlan0: authenticated [ 25.624317] wlan0: moving STA a0:f3:c1:5e:ad:cb to state 2 [ 25.633096] wlan0: associate with a0:f3:c1:5e:ad:cb (try 1/3) [ 25.642442] wlan0: RX AssocResp from a0:f3:c1:5e:ad:cb (capab=0x431 status=0 aid=4) [ 25.642466] wlan0: moving STA a0:f3:c1:5e:ad:cb to state 3 [ 25.658438] wlan0: associated [ 25.658476] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 25.673096] wlan0: dropped frame to a0:f3:c1:5e:ad:cb (unauthorized port) [ 25.712959] wlan0: dropped frame to a0:f3:c1:5e:ad:cb (unauthorized port) [ 25.825378] wlan0: moving STA a0:f3:c1:5e:ad:cb to state 4 [ 25.834943] wlcore: Association completed. [ 74.762924] cfg80211: Verifying active interfaces after reg change [ 3509.140323] systemd-timedated[2077]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/. [ 4081.882324] usb 1-1: new full-speed USB device number 2 using ci_hdrc [ 4082.181067] usbcore: registered new interface driver usbserial [ 4082.181263] usbcore: registered new interface driver usbserial_generic [ 4082.181687] usbserial: USB Serial support registered for generic [ 4082.218678] usbcore: registered new interface driver ftdi_sio [ 4082.224482] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4082.224622] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected [ 4082.226184] usb 1-1: Detected FT232RL [ 4082.226197] usb 1-1: Number of endpoints 2 [ 4082.226206] usb 1-1: Endpoint 1 MaxPacketSize 64 [ 4082.226214] usb 1-1: Endpoint 2 MaxPacketSize 64 [ 4082.226223] usb 1-1: Setting MaxPacketSize 64 [ 4082.228950] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 4084.899093] usb 1-1: USB disconnect, device number 2 [ 4084.900760] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 [ 4084.901034] ftdi_sio 1-1:1.0: device disconnected