On 04/13/2018 02:34 AM, Peter Robinson wrote:
Hi,
> i have a inet 3f tablet (pov protab 255xxl) and managed to get fedora 27 running on
the board with a inet1 dtb,
That means nothing to me, I'm guessing it's a cheap AllWinner based
device, do you have any more details? Are you using a Fedora u-boot or
your own? If Fedora what's it called? What Fedora image are you using?
> The kernel from the initial image boots and everything (except for the touchscreen)
works.
Touch screen is no real surprise if it's an AllWinner based tablet,
they change them constantly based on cost and availability.
> this is version 4.13.3-300.fc27.amv7hl,
> i also installed version 4.13.9-300.fc27.amv7hl,
If one 4.13 works it's not surprising others do, what about 4.14.x
> and these also work fine,
>
> Then i updated to the latest fedora 27 kernel 4.15.15-300.fc27.armv7hl and this
kernel starts booting, but then the screen goes blank, and i cannot login via ssh either,
Can you some how grab the output up until it goes blank, I suspect
that last output might give us some idea.
> the same happened with a self compiled kernel 4.17.0-0.rc0.git0.300.fc27.armv7hl with
lima drivers patched.
What about a Fedora 4.16.2 (built yesterday) kernel? Unfortunately we
can't help with custom built kernels, it's almost impossible to remote
debug the Fedora ones, custom is the never step of impossible.
> I have tried to find the serial port pins on the board, but could not locate them,
also kernel versions 4.14 i have not tried yet because i cannot find them precompiled.
Hi,
It looks like
sunxi.org has a web page for this device:
http://linux-sunxi.org/INet_3F
According to the wiki article the serial port pins are hidden under the touch screen
cable.
-Will
Kernels can always be found in koji to download:
https://koji.fedoraproject.org/koji/packageinfo?packageID=8
You'll find every thing to the latest 4.17 linus snapshot there.
> Are there any parameters i can change to try to make it boot, or get more output in
the process? Or a link to documentation :)
Sadly there's no MakeItWork kernel command line option, it's a matter
of getting debug and trying to work out what went wrong and why. We
don't explicitly support these devices due to the lack of ease of
supporting them as you're finding out, but we don't do anything to
actively stop them working, it's very much a best effort, I suspect
there's something upstream that has regressed, the question is working
out what, and the last of that early boot output will be the best spot
to start.
Peter
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org