Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix
will break that board.
Works okay on the Beaglebone White using the F21 TC1 Minimal image. Hit
a couple of errors at the beginning, but the system came up fine.
U-Boot SPL 2014.10 (Nov 11 2014 - 07:35:06)
No AC power, disabling frequency switch
MMC: block number 0x100 exceeds max(0x0)
MMC: block number 0x200 exceeds max(0x0)
*** Error - No Valid Environment Area found
Using default environment
...
Paul
Adam
On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson <pbrobinson(a)gmail.com> wrote:
> Hi Adam,
>
> Problem should now be fixed with -5
>
> Can you test and provide karma so we can get it in GA.
>
>
https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-201...
>
> On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode <adam(a)spicenitz.org> wrote:
>> This is still present with -3. It looks like this version of U-Boot is
>> not capable of booting from the internal eMMC on beaglebone black.
>>
>> U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41)
>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
>> spl: mmc init failed: err - -19
>> ### ERROR ### Please RESET the board ###
>>
>>
>> I found at least another thread about this issue, from version 2014.07:
>>
https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
>>
>>
>> Adam
>>
>> On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson(a)gmail.com>
>> wrote:
>>> A minor bug and is fixed in uboot-tools-2014.10-3.fc21
>>>
>>> Peter
>>>
>>> On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam(a)spicenitz.org>
wrote:
>>>> Hopefully I did something wrong, but it's not working at all for me
on
>>>> the beaglebone black:
>>>>
>>>> Here is what I get when I try to boot from eMMC:
>>>>
>>>> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
>>>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
>>>> spl: mmc init failed: err - -19
>>>> ### ERROR ### Please RESET the board ###
>>>>
>>>>
>>>>
>>>> Here is what I get when I make a new SD card from the latest minimal
>>>> image:
>>>>
>>>>
>>>> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
>>>>
>>>> Watchdog enabled
>>>> I2C: ready
>>>> DRAM: 512 MiB
>>>> NAND: 0 MiB
>>>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
>>>> *** Error - No Valid Environment Area found
>>>> *** Warning - bad CRC, using default environment
>>>>
>>>> Net: <ethaddr> not set. Validating first E-fuse MAC
>>>> cpsw, usb_ether
>>>> Hit any key to stop autoboot: 0
>>>> switch to partitions #0, OK
>>>> mmc0 is current device
>>>> Scanning mmc 0:2...
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Failed to mount ext2 filesystem...
>>>> ** Unrecognized filesystem type **
>>>> Card did not respond to voltage select!
>>>> Booting from nand ...
>>>>
>>>> no devices available
>>>>
>>>> no devices available
>>>> Bad Linux ARM zImage magic!
>>>>
>>>>
>>>>
>>>>
>>>> When I am in the uboot command processor, I cannot select the internal
>>>> eMMC at all:
>>>>
>>>> U-Boot# mmc dev 1
>>>> Card did not respond to voltage select!
>>>>
>>>>
>>>>
>>>> Previously, I was booting with no problems from either eMMC or SD with
>>>> F21.
>>>>
>>>>
>>>>
>>>> Thanks,
>>>>
>>>> Adam
>>>>
>>>>
>>>> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson
<pbrobinson(a)gmail.com>
>>>> wrote:
>>>>> Hi All,
>>>>>
>>>>> Just a heads up that the u-boot 2014.10 GA is on it's way to
Fedora 21.
>>>>>
>>>>>
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
>>>>>
>>>>> This release contains numerous fixes and improvements over the
>>>>> currently shipping release including, but by no means limited to:
>>>>> * Upstream generic distro support (huge thanks to Dennis Gilmore
and
>>>>> Steven Warren for their tireless work to get this upstream
>>>>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans
for
>>>>> this tireless work on this)
>>>>> * Numerous other improvements too long to name.
>>>>>
>>>>> New devices that we now enable in this release, in no particular
order,
>>>>> include:
>>>>>
>>>>> AllWinner:
>>>>> A10-OLinuXino-Lime
>>>>> A10s-OLinuXino-M
>>>>> A13-OLinuXino
>>>>> A13-OLinuXinoM
>>>>> A20-OLinuXino_MICRO
>>>>> Bananapi
>>>>> Cubieboard
>>>>> Cubieboard2
>>>>> Cubietruck
>>>>> Mele_A1000
>>>>> Mele_A1000G
>>>>> Mini-X
>>>>> Mini-X-1Gb
>>>>>
>>>>> Tegra:
>>>>> jetson-tk1
>>>>>
>>>>> i.MX6
>>>>> cm_fx6 (Utilite)
>>>>> riotboard
>>>>>
>>>>> It's not yet in nightly builds but I'm going to request it
for the
>>>>> next Beta TC compose.
>>>>>
>>>>> Known issues:
>>>>> * Panda is not yet ported to generic distro support
>>>>>
>>>>> Please test and provide feedback.
>>>>>
>>>>> Peter
>>>>> _______________________________________________
>>>>> arm mailing list
>>>>> arm(a)lists.fedoraproject.org
>>>>>
https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm