I would have thought the first .dtb you were using was the correct one for you. I'm
surprised the LABEL=_/ option doesn't work. Maybe run blkid and double check the UUID?
Can you post the partition table? I only see p1 - p3.
On Mar 1, 2015, at 12:12 AM, Sergio Durigan Junior
<sergiodj(a)sergiodj.net> wrote:
> On Saturday, February 28 2015, Scott M. Jones wrote:
>
> I'm booting F21 LXDE successfully on Beagleboard xM rev B. Different
> DTB but the rest should be the same. Comparing mine to yours you may be
> loading the kernel at the wrong address. I'm not really using the boot.scr.
>
> More info here including my uEnv.txt:
>
https://lists.fedoraproject.org/pipermail/arm/2015-January/008901.html
Thanks for the reply, Scott. Actually, your post was one of the first
ones I saw, and apparently I should have paid more attention to it :-).
Well, I don't think the problem is loading the Linux kernel at the wrong
address, but rather using the wrong dtb file. I was using
omap3-beagle-xm.dtb, but when I replaced that by omap3-beagle-xm-ab.dtb,
at least I got the kernel to boot. I am not really sure the -ab version
fully works with rev C, but that's the best I've gotten now, apparently.
*However*, that did not really solve everything for me, because now I am
seeing errors during the boot, and I can't get the boot to complete.
Here's the full log:
<
http://fpaste.org/191874/51860941/>
The real problem is getting the root right here, I think (although I
also don't think the error messages are good too). I check the UUID of
the partition and it's all good; I also tried using the LABEL=_/ value
in the root= parameter, but it didn't work also.
Ideas here? Thanks,
--
Sergio
GPG key ID: 0x65FC5E36
Please send encrypted e-mail if possible
http://sergiodj.net/