Dennis,
Have you tried building the system on an eMMC card and booting that?
Just curious.
Thanks,
Stewart
On 08/23/2017 10:41 AM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
> Hi Dennis,
>
> I have been doing the same process as you with the exception that I
> change the UUIDs in extlinux.conf and /etc/fstab. The other thing I
> do, because I change update the UUIDs, is create a new initramfs. I
> will try again later without creating a new initramfs to see if I can
> get to where you are. BTW, I also am trying to load the Mate spin,
> not the server release.
>
> Can you try an experiment for me? Can you try to upgrade your system
> doing a "dnf -y update" command. The reboot to ensure it reboots
> with the new kernel? By doing the dnf upgrade, you will force the
> system to use dracut to create a new initramfs image. Let's see if
> this now works. This is essentially where the system began failing
> after f24. We need some confidence that the upgrade process is not
> going to kill our path forward.
I plugged in a usb2 ethernet adapter and updated the system and it came
back fine, however I had to use a usb2 ethernet adapater in the usb2
port as it seems the usb3 port is not working, the ethernet onboard is
wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
Dennis
> Thanks.
>
> Stewart
>
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>> --
>>>
>>> Hello Dennis,
>>>
>>> that looks beautiful. You have a running Odroid-XU4 with actual
>>> Kernel
>>> with Fedora 26 !!
>>>
>>> How did you manage it? I haven't so much luck with the
>>> installation.
>>>
>>> Thanks
>>> Andreas
>> I ran
>>
>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>> I grabbed from
https://github.com/hardkernel/u-boot/tree/odroidxu4-
>> v201
>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>> tzsw.bin.hardkernel and sd_fusing.sh
>> then ran
>> sh sd_fusing.sh /dev/sdb
>> I used parted to resize partition 4 mounted it and ran xfs_growfs
>> so it
>> filled the sd card
>>
>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
>> unlock the root account as initial-setup is not running.
>>
>> of couse /dev/sdb was my sdcard, make sure you have the right
>> device
>> for yours. It does seem that the nic is not detected however.
>>
>> Dennis
>>
>>
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org