On Mon, Sep 18, 2017 at 9:46 PM, Robert Moskowitz <rgm(a)htt-consult.com> wrote:
On 09/17/2017 06:12 AM, Peter Robinson wrote:
>
> On Sun, Sep 17, 2017 at 3:49 AM, Robert Moskowitz <rgm(a)htt-consult.com>
> wrote:
>>
>>
>> On 09/16/2017 07:57 AM, Peter Robinson wrote:
>>>
>>> On Fri, Sep 15, 2017 at 7:19 PM, Robert Moskowitz
<rgm(a)htt-consult.com>
>>> wrote:
>>>>
>>>> I think this one is even worst than 0913. At least with what little I
>>>> tested.
>>>>
>>>> Still no ethernet, but the link is up. Further, I forgot to mention
>>>> last
>>>> time, the config network option on the console is only offering the
>>>> hostname
>>>> to change. No ethernet, not surprisingly. But I set the hostname and
>>>> it
>>>> does not 'take'. On continue it does not display an X in front
of the
>>>> networking option and once I do log in as root, the hostname is still
>>>> localhost. I can change the hostname with the normal commands.
>>>
>>> What version of u-boot? There was an issue that affected some
>>> AllWinner A20 devices, make sure you're running 2017.09 rc4
>>
>>
>> Dah, I had to do was check the saved console session:
>>
>> U-Boot SPL 2017.09-rc2 (Aug 25 2017 - 17:20:07)
>> DRAM: 1024 MiB
>> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
>> Trying to boot from MMC1
>>
>>
>> U-Boot 2017.09-rc2 (Aug 25 2017 - 17:20:07 +0000) Allwinner Technology
>>
>> CPU: Allwinner A20 (SUN7I)
>> [rgm@lx120e arm]$ head screenlog.6bad -n20
>> �
>> U-Boot SPL 2017.09-rc2 (Aug 25 2017 - 17:20:07)
>> DRAM: 1024 MiB
>> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
>> Trying to boot from MMC1
>>
>>
>> U-Boot 2017.09-rc2 (Aug 25 2017 - 17:20:07 +0000) Allwinner Technology
>>
>> CPU: Allwinner A20 (SUN7I)
>> Model: Cubietech Cubieboard2
>> I2C: ready
>> DRAM: 1 GiB
>> MMC: SUNXI SD/MMC: 0
>>
>> So Koji is building the image with RC2. Please point me to RC4 and I
>> will
>> test with that. Or please roll RC4 into the build process.
>
>
https://koji.fedoraproject.org/koji/buildinfo?buildID=966566
This takes me to the uboot tools, not the uboot images. I did a little
digging around, but I don't really know what to look for to get the file
with the actual images.
They are there, under noarch section
I thought it was uboot-tools, as I have used that to get the
Cubieboard2
uboot to work with the CubieTruck Centos7 image. :(
Please point me to where I can get the RC4 uboot.
That link is correct, just look closer, maybe search uboot-images in
your browser?
> thanks
>
>
>>
>> It will be added to the build once we're out of freeze post beta,
>> although that will be a 2017.09 GA build.
>>
>>>>> I plugged in the TP-link USB wifi dongle, and the console went crazy
>>>>> scrolling messages. I had to unplug the dongle. The last few
messages
>>>>> are:
>>>>>
>>>>> [ 6040.341864] usb 4-1: ath9k_htc: USB layer deinitialized
>>>>
>>>> You need to include the full trace (from the point it says begin trace
>>>> or similar), but that's not really a ARM/cubieboard specific crash
>>>>
>>> Since I am looking at the capture file...
>>>
>>> um, the whole capture is 440KB. How do you want it...
>>
>> I don't actually want any of it because I don't have much interest in
>> terrible ath9K wireless dongles but the crash between the star/end
>> indicators certainly won't be 440K, there's never any reason for a
>> full dmesg.
>>
>