Re: Exactly how slow is Fedora 27 on an RP3 ? dnf update takes hours ?
by linux guy
I removed the suspect SD card from the RPi3 and tested it in my laptop.
# hdparm -Tt /dev/mmcblk0
/dev/mmcblk0:
Timing cached reads: 15750 MB in 2.00 seconds = 7893.74 MB/sec
Timing buffered disk reads: 88 MB in 3.05 seconds = 28.82 MB/sec <---
This was 365 kB/sec in the RPi3.
It seems to test OK in the laptop. Bad connection in the RPi3 ?
So I prepared a second class 10 SD card with the same image. I tested it in
the laptop that I used to prepare it.
# hdparm -Tt /dev/mmcblk0
/dev/mmcblk0:
Timing cached reads: 15908 MB in 2.00 seconds = 7973.32 MB/sec
Timing buffered disk reads: 54 MB in 3.05 seconds = 17.71 MB/sec
The second SD is actually slower to read than the first one, in the
laptop. 28.82 versus 17.71 MB/sec
I booted the 2nd SD card in the RPi3.
# hdparm -Tt /dev/mmcblk0
/dev/mmcblk0:
Timing cached reads: 816 MB in 2.00 seconds 408.21 MB/sec
Timing buffered disk reads: 66 MB in 3.03 seconds = 21.81 MB/sec <---
Faster than it was in the laptop !
#time dnf update - install 32 packages, update 275, just like last time
I ran #time dnf update and stopped it at 47 packages.
real: 30m46.181s
user: 0.00s
sys: 0m.020s
I retested the SD card and got the same read speeds as above.
On Wed, Jan 24, 2018 at 2:06 PM, Duff, Bryan <bryan.duff1(a)abbott.com> wrote:
> That would be a good place to start. FWIW, all my micro SD cards are
> Sandisk ultra’s . Unfortunately I don’t see that /sys/block is well
> populated (no model).
>
>
>
> -Bryan
>
>
>
> *From:* linux guy [mailto:linuxguy123@gmail.com]
> *Sent:* Wednesday, January 24, 2018 2:51 PM
> *To:* Duff, Bryan
> *Cc:* Richard Ryniker; arm(a)lists.fedoraproject.org; marcin steć
> *Subject:* Re: [fedora-arm] Re: Exactly how slow is Fedora 27 on an RP3 ?
> dnf update takes hours ?
>
>
>
> Found the issue:
>
>
>
> sudo hdparm -Tt /dev/mmcblk0
>
>
>
> /dev/mmcblk0:
>
> Timing cached reads: 240 MB in 2.00 seconds = 119.84 MB/sec
>
> Timing buffered disk reads: 2 MB in 5.60 seconds = 365.82 kB/sec
> <------ Wow !
>
>
>
> Bad memory card ????
>
>
>
>
>
> On Wed, Jan 24, 2018 at 1:39 PM, Duff, Bryan <bryan.duff1(a)abbott.com>
> wrote:
>
> Eh, I’ll give it a go… on F26 armhf7l. Keep in mind my repos may be
> different, so it might very the timing by maybe 30s?
>
>
>
> time sudo dnf install rygel –y
>
>
>
> Unfortunately it’s only 21 packages for me. And now that I look at it,
> would probably be better to “dnf download” first and time that separately.
>
>
>
> //start snip
>
> …
>
> Complete!
>
>
>
> real 3m34.645s
>
> user 1m54.094s
>
> sys 1m19.396s
>
> # and
>
> sudo hdparm -Tt /dev/mmcblk0
>
>
>
> /dev/mmcblk0:
>
> Timing cached reads: 834 MB in 2.00 seconds = 417.21 MB/sec
>
> Timing buffered disk reads: 68 MB in 3.06 seconds = 22.24 MB/sec
>
> //end snip
>
>
>
> Thanks.
>
>
>
> -Bryan
>
>
>
> *From:* linux guy [mailto:linuxguy123@gmail.com]
> *Sent:* Wednesday, January 24, 2018 2:31 PM
> *To:* Richard Ryniker
> *Cc:* arm(a)lists.fedoraproject.org; marcin steć
> *Subject:* [fedora-arm] Re: Exactly how slow is Fedora 27 on an RP3 ? dnf
> update takes hours ?
>
>
>
> I just ran #time dnf install rygel on my fresh install. It required 56
> packages.
>
>
>
> real 64m43.986s
>
> user 1m59.778s
>
> sys 0m25.893s
>
>
>
> This is on a console only machine, no GUI.
>
>
>
> Could someone run the same process on their RPi3 and see what they get ?
>
>
>
>
>
> This communication may contain information that is proprietary,
> confidential, or exempt from disclosure. If you are not the intended
> recipient, please note that any other dissemination, distribution, use or
> copying of this communication is strictly prohibited. Anyone who receives
> this message in error should notify the sender immediately by telephone or
> by return e-mail and delete it from his or her computer.
>
>
>
5 years, 1 month
The 4.15 kernel rebase on stable releases
by Peter Robinson
Hi All,
Just a heads up that the 4.15 kernel is headed to stable releases.
I did a bunch of testing over the weekend and fixed up a bunch of
issues, added some minor enhancements across a number of platforms.
There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes
for people to test, I expect a 4.15.3 kernel going to updates-testing
later today or tomorrow.
A few notes for the fixes I added:
* fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
* Crypto/rng engine on some AllWinner devices now loads/works
(A10/A143/A20 at least, I suspect more will come with later kernels)
* Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
* A bunch of improvements for monitor detection on the Raspberry Pi
* Ethernet driver more stable on AllWInner A64/H5 platforms (like Pine64)
* Numerous other upstream fixes improvements that headed upstream
* 4.15.3 (not in the build above) will include aarch64 fixes for
Spectre/Meltdown.
So please test and feel free to reply to this thread with any new
issues you see with the 4.15 series, or any positive results.
[1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088
5 years, 1 month
Fedora ARM & AArch64 Status Meeting Minutes 2018-02-13
by Paul Whalen
========================================================
#fedora-meeting-2: Fedora ARM and AArch64 Status Meeting
========================================================
Meeting started by pwhalen at 15:00:07 UTC. The full logs are available
at
https://meetbot.fedoraproject.org/fedora-meeting-2/2018-02-13/fedora_arm_...
.
Meeting summary
---------------
* roll call (pwhalen, 15:00:07)
* 1) ==== Userspace Status ==== (pwhalen, 15:05:07)
* Mass rebuild is complete. (pwhalen, 15:05:27)
* List of failures -
https://kojipkgs.fedoraproject.org/mass-rebuild/f28-failures.html
(pwhalen, 15:06:02)
* List of packages needing rebuild -
https://kojipkgs.fedoraproject.org/mass-rebuild/f28-need-rebuild.html
(pwhalen, 15:06:27)
* 2) ==== Kernel Status ==== (pwhalen, 15:11:24)
* Latest - kernel-4.16.0-0.rc1.git0.1.fc28 (pwhalen, 15:11:36)
* LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1043729
(pwhalen, 15:11:36)
* F27 - kernel-4.15.2-301.fc27 (pwhalen, 15:12:55)
* LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1043716
(pwhalen, 15:12:55)
* Please test and report any issues to the list or #fedora-arm.
(pwhalen, 15:13:16)
* 3) ==== Bootloader Status ==== (pwhalen, 15:20:12)
* uboot-tools-2018.03-0.3.rc2.fc28 (pwhalen, 15:20:28)
* LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1043960
(pwhalen, 15:20:28)
* 4) == F28 Testing == (pwhalen, 15:28:31)
* 5) == Open Floor == (pwhalen, 15:34:30)
Meeting ended at 15:41:18 UTC.
Action Items
------------
Action Items, by person
-----------------------
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* pwhalen (38)
* pbrobinson (26)
* optimist (14)
* jlinton (10)
* jsmith (6)
* zodbot (4)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
5 years, 1 month
Using generic tuning form armhfp
by Florian Weimer
GCC offers a generic tuning option for Arm these days, but we select
-mtune=cortex-8a instead.
Is this still a good choice?
Thanks,
Florian
5 years, 1 month
Fedora ARM & AArch64 Status Meeting Minutes 2018-02-06
by Paul Whalen
========================================================
#fedora-meeting-2: Fedora ARM and AArch64 Status Meeting
========================================================
Meeting started by pwhalen at 15:00:37 UTC. The full logs are available
at
https://meetbot.fedoraproject.org/fedora-meeting-2/2018-02-06/fedora_arm_...
.
Meeting summary
---------------
* roll call (pwhalen, 15:00:37)
* 1) ==== Userspace Status ==== (pwhalen, 15:04:54)
* Firefox FTBFS - https://bugzilla.redhat.com/show_bug.cgi?id=1523912
(pwhalen, 15:05:33)
* LINK: https://github.com/hexchat/hexchat/issues/2116 (jlinton2,
15:09:00)
* 2) ==== Kernel Status ==== (pwhalen, 15:13:40)
* Latest - kernel-4.15.0-1.fc28 (pwhalen, 15:13:51)
* LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1021748
(pwhalen, 15:13:51)
* Please test and report any issues to the list or #fedora-arm.
(pwhalen, 15:16:02)
* 3) ==== Bootloader Status ==== (pwhalen, 15:17:53)
* Latest - uboot-tools-2018.03-0.1.rc1.fc28 (pwhalen, 15:18:04)
* LINK: https://koji.fedoraproject.org/koji/buildinfo?buildID=1022079
(pwhalen, 15:18:04)
* Rawhide install fails on reboot due to incomplete efi boot menu
entry (pwhalen, 15:22:07)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=1542141
(pwhalen, 15:22:17)
* 4) == Open Floor == (pwhalen, 15:27:45)
Meeting ended at 15:37:32 UTC.
Action Items
------------
Action Items, by person
-----------------------
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* pwhalen (27)
* pbrobinson (22)
* jlinton2 (13)
* jsmith (6)
* zodbot (5)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
5 years, 1 month