Patching aarch64 support into Fedora (Round 4)
by Al Stone
Based on recent IRC discussions, some changes were made to
the patchify script [0] and the Fedora package archive scanned
again. The overall goal is to try to find all of those Fedora
packages that use autoconf or ./configure to build but that do
not yet have the updates to recognize 'aarch64' as a valid
target (i.e., they need newer versions of config.sub or
config.guess). And, if they do not, generate a patch that
will add the latest config.* files.
What changed? The parsing of the spec file needed to look
at the %build and %prep sections is a bit smarter. It used
to see some uses of autoconf/configure in the initial prologue
for a spec file (e.g., BuildRequires: autoconf) as a proper
use of autoconf when it clearly is not. Additionally, if
autoreconf is being used outside of an if-block, and it is
using -i/--install and -f/--force, these are packages that
will correct themselves on build so do not need patching [1].
These changes should eliminate some false positives and catch
some packages that may have inadvertently been skipped over.
The list of packages needing patching is here:
http://fedorapeople.org/~ahs3/patchify/run4/patched.pkgs
This lists 2027 packages that need patching (most of which
already have bugs filed against them, but there were some
new ones found (341) and others removed (290). I'll be
comparing this against the aarch64 tracking bug [2] to be
sure we're in sync and all the right notifications have
been made.
Note that all of the package lists and a README describing
what each list represents are also at:
http://fedorapeople.org/~ahs3/patchify/run4/
Some data I found interesting from this scan [3] are:
-- there are 572 dead packages in the archive
-- 196 packages already use autoreconf -i -f which is higher
than I thought it might be
-- there are 105 cases where it's difficult to determine the
source directory name when all you have is the package name
-- a lot of packages use ./configure, but most of them do not
need or use config.sub/config.guess
And the best one: 579 packages have already been modified to use
the latest config.sub/config.guess and are already able to handle
aarch64.
So, action items for me are: (1) make sure the AArch64 tracking bug
is listing bugs for the right list of packages, and (2) help close
as many of those bugs as I can.
If you can help, please do.
Notes:
[0] git://fedorapeople.org/~ahs3/patchify.git
[1] The specific package list is:
http://fedorapeople.org/~ahs3/patchify/run4/autoreconf.pkgs
[2] https://bugzilla.redhat.com/show_bug.cgi?id=922257
[3] This is the output summary from the scan:
--- Results ---
Total packages examined: 12088
Total dead packages: 572
Total packages using autoreconf properly: 196
Total patches available: 2027
Total packages using ./configure but not config.*: 8353
Total packages using config.* with aarch64 in them: 579
--- Configuration ---
365 use autoconf in some recognized form
196 use autoreconf with correct options
3512 use configure in some recognized form
7715 do not mention autoconf or configure
--- Error Conditions ---
0 cases of unclassified errors
251 cases where we could not unpack the SRPM
1 cases where we there was no spec file
105 cases where we could not find the source directory
0 cases where we could not cp -r the source directory
0 cases where "find config.*" reported errors
4 cases where we could not overwrite a config.* file
--
ciao,
al
-----------------------------------
Al Stone
Software Engineer
Red Hat, Inc.
ahs3(a)redhat.com
-----------------------------------
11 years
Pogo not responding this morning
by Robert Moskowitz
I left my ssh connections up overnight after all the changes to a
different port. This morning, neither of them were responding.
I ended up powering down, and booting back up. The boot reached the
kernel and remained unresponsive. Yesterday, I did not make any changes
to uboot to boot off the usb or to load the Fedora boot into NAND. I
did run yum update to get all current code.
I took the usb drive out, and changed /etc/ssh/sshd_config back to
default port (22) via mounting the usb on my notebook. I powered the
pogo back up, but no difference. Since then I built a new usb drive and
am up running with that.
I looked some more at the old drive. The only entries in messages after
my stopping last night was the 3am cron logrotate. What else should I
look at to troubleshoot this failure.
I am going to leave this build pretty much alone. I am going to run yum
update.
11 years
arm F-19 Branched report: 20130419 changes
by Fedora compose checker
Compose started at Fri Apr 19 11:10:04 UTC 2013
Broken deps for armhfp
----------------------------------------------------------
[R-GenomicFeatures]
R-GenomicFeatures-1.6.1-3.fc18.noarch requires R-rtracklayer
[RepetierHost]
RepetierHost-0.84-1.fc19.noarch requires mono(OpenTK.GLControl) = 0:1.1.0.0
RepetierHost-0.84-1.fc19.noarch requires mono(OpenTK) = 0:1.1.0.0
[aeolus-conductor]
aeolus-all-0.10.6-2.fc19.noarch requires mongodb-server
aeolus-all-0.10.6-2.fc19.noarch requires iwhd
aeolus-conductor-0.10.6-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[alexandria]
alexandria-0.6.9-4.fc19.noarch requires ruby(abi) >= 0:1.9.1
[amide]
amide-1.0.0-4.fc19.armv7hl requires libvolpack.so.1
[bochs]
bochs-2.6-2.fc19.armv7hl requires bochs-bios = 0:2.6-2.fc19
[clementine]
clementine-1.1.1-1.fc19.armv7hl requires libprotobuf.so.7
clementine-1.1.1-1.fc19.armv7hl requires libimobiledevice.so.3
[cloud-init]
cloud-init-0.7.1-3.fc19.noarch requires dmidecode
[coccinella]
coccinella-0.96.20-5.fc19.noarch requires iaxclient
[condor-cloud]
condor-cloud-0.1-6.fc19.noarch requires qemu-kvm >= 0:0.14
condor-cloud-node-0.1-6.fc19.noarch requires qemu-kvm >= 0:0.14
[connman]
connman-1.5-4.fc19.armv7hl requires libxtables.so.7
connman-1.5-4.fc19.armv7hl requires libgnutls.so.26(GNUTLS_1_4)
connman-1.5-4.fc19.armv7hl requires libgnutls.so.26
[csmith]
csmith-2.1.0-8.fc19.armv7hl requires perl(Sys::CPU)
[deltacloud-core]
deltacloud-core-1.0.5-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[denemo]
denemo-0.9.4-0.fc18.armv7hl requires libgtksourceview-3.0.so.0
[devtodo2]
devtodo2-2.1-3.20120711git8dee6.fc19.armv7hl requires libgo.so.0
[eruby]
eruby-1.0.5-19.fc18.armv7hl requires libruby.so.1.9
eruby-libs-1.0.5-19.fc18.armv7hl requires ruby(abi) >= 0:1.9.0
eruby-libs-1.0.5-19.fc18.armv7hl requires libruby.so.1.9
[fcitx-libpinyin]
fcitx-libpinyin-0.2.1-1.fc19.armv7hl requires libpinyin.so.2(LIBPINYIN)
fcitx-libpinyin-0.2.1-1.fc19.armv7hl requires libpinyin.so.2
[flowcanvas]
flowcanvas-0.7.1-8.fc18.armv7hl requires libgraph.so.5
[gauche-gtk]
1:gauche-gtk-0.6-0.8.20120403gitf7d3f802f3750.fc19.armv7hl requires libgauche-0.9.so.0.2
[gdal]
gdal-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-java-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-libs-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-perl-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-ruby-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
[gdcm]
gdcm-2.0.18-6.fc18.armv7hl requires libpoppler.so.26
[gearbox]
gearbox-10.11-3.fc19.armv7hl requires libIceUtil.so.35b
[ghc-hakyll]
ghc-hakyll-devel-3.4.0.0-3.fc19.armv7hl requires ghc-devel(hamlet-1.1.6.3-6690965f99be1c8cbd4475b13c7d8a9b)
[gnome-applets]
1:gnome-applets-3.5.92-3.fc18.armv7hl requires libgweather-3.so.1
[gnome-boxes]
gnome-boxes-3.8.0-1.fc19.armv7hl requires libvirt-daemon-kvm
[gnome-panel]
gnome-panel-3.6.2-5.fc19.armv7hl requires libgnome-desktop-3.so.5
gnome-panel-devel-3.6.2-5.fc19.armv7hl requires libgnome-desktop-3.so.5
[gnome-pie]
gnome-pie-0.5.3-3.20120826git1b93e1.fc19.armv7hl requires libbamf3.so.0
[gnomint]
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26(GNUTLS_2_8)
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26(GNUTLS_1_4)
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26
[gooddata-cl]
gooddata-cl-1.2.56-2.fc19.noarch requires gdata-java
[gorm]
gorm-1.2.18-1.fc19.armv7hl requires libgnustep-gui.so.0.22
[imagefactory]
imagefactory-1.1.2-1.fc19.noarch requires python-libguestfs
imagefactory-1.1.2-1.fc19.noarch requires iwhd >= 0:1.2
[kawa]
1:kawa-1.11-5.fc19.armv7hl requires servlet25
[libkolab]
php-kolab-0.4.1-3.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-kolab-0.4.1-3.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[librasterlite]
librasterlite-1.1c-5.fc19.armv7hl requires libspatialite.so.3
[livecd-tools]
1:livecd-tools-19.1-1.fc19.armv7hl requires hfsplus-tools
[liveusb-creator]
liveusb-creator-3.11.7-3.fc19.noarch requires syslinux-extlinux
liveusb-creator-3.11.7-3.fc19.noarch requires syslinux
[logwatch]
logwatch-7.4.0-24.20130102svn127.fc19.noarch requires perl(Sys::CPU)
[mingw-qt5-qtscript]
mingw32-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw32(qt5widgets.dll)
mingw32-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw32(qt5gui.dll)
mingw32-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw32(qt5core.dll)
mingw64-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw64(qt5widgets.dll)
mingw64-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw64(qt5gui.dll)
mingw64-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw64(qt5core.dll)
[mingw-qwt]
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtxmld4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtxml4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtsvgd4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtsvg4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtguid4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtgui4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtcored4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtcore4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtxmld4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtxml4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtsvgd4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtsvg4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtguid4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtgui4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtcored4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtcore4.dll)
[msp430-libc]
msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3
[mumble]
murmur-1.2.3-12.fc19.armv7hl requires libIceUtil.so.35b
murmur-1.2.3-12.fc19.armv7hl requires libIce.so.35b
[mygui]
mygui-3.2.0-4.fc19.armv7hl requires libCommon.so
mygui-demos-3.2.0-4.fc19.armv7hl requires libCommon.so
mygui-tools-3.2.0-4.fc19.armv7hl requires libCommon.so
[nightview]
nightview-cli-0.3.3-7.fc18.armv7hl requires libcfitsio.so.0
nightview-gui-0.3.3-7.fc18.armv7hl requires libcfitsio.so.0
[ooo2gd]
ooo2gd-3.0.0-6.fc19.armv7hl requires gdata-java
[openpts]
openpts-0.2.6-6.fc19.armv7hl requires tboot
[openshift-origin-broker]
openshift-origin-broker-1.5.1-1.fc19.noarch requires mongodb-server
[openstack-nova]
openstack-nova-compute-2013.1-0.11.rc1.fc19.noarch requires qemu-kvm
openstack-nova-compute-2013.1-0.11.rc1.fc19.noarch requires python-libguestfs
[ovirt-engine]
ovirt-engine-notification-service-3.1.0-1.fc19.noarch requires classpathx-mail
[ovirt-node]
ovirt-node-2.6.0-1.fc19.noarch requires grub2
ovirt-node-plugin-cim-2.6.0-1.fc19.noarch requires libvirt-cim
[oz]
oz-0.10.0-1.fc19.noarch requires python-libguestfs >= 0:1.18
oz-0.10.0-1.fc19.noarch requires libvirt-daemon-kvm
[pdns]
pdns-3.1-4.fc19.armv7hl requires libboost_serialization-mt.so.1.50.0
pdns-3.1-4.fc19.armv7hl requires libboost_program_options-mt.so.1.50.0
[perl-Bio-ASN1-EntrezGene]
perl-Bio-ASN1-EntrezGene-1.091-17.fc19.noarch requires perl(Bio::Index::AbstractSeq)
[perl-Bio-SamTools]
perl-Bio-SamTools-1.35-2.fc19.armv7hl requires perl(Bio::SeqFeature::Lite)
perl-Bio-SamTools-1.35-2.fc19.armv7hl requires perl(Bio::PrimarySeq)
[perl-Math-Clipper]
perl-Math-Clipper-1.17-3.fc19.armv7hl requires libpolyclipping.so.5
[perl-YAML-Parser-Syck]
perl-YAML-Parser-Syck-0.01-24.fc19.armv7hl requires libsyck.so.0
[php-horde-Horde-Vfs]
php-horde-Horde-Vfs-2.0.4-3.fc19.noarch requires php-pear(pear.horde.org/Horde_Auth) >= 0:2.0.0
[php-xcache]
php-xcache-3.0.1-2.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-xcache-3.0.1-2.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[rootplot]
rootplot-2.2.1-7.fc19.noarch requires root-python
[rubygem-aeolus-cli]
rubygem-aeolus-cli-0.5.0-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-aeolus-image]
rubygem-aeolus-image-0.5.0-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-apipie-rails]
rubygem-apipie-rails-0.0.13-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-boxgrinder-build]
rubygem-boxgrinder-build-0.10.4-1.fc19.noarch requires ruby-libguestfs
rubygem-boxgrinder-build-0.10.4-1.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-boxgrinder-core]
rubygem-boxgrinder-core-0.3.14-1.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-cucumber]
rubygem-cucumber-1.2.1-3.fc19.noarch requires rubygem(gherkin) >= 0:2.4.5
[rubygem-gem2rpm]
rubygem-gem2rpm-0.8.1-2.fc18.noarch requires ruby(abi) = 0:1.9.1
[rubygem-gettext_i18n_rails]
rubygem-gettext_i18n_rails-0.9.2-1.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-newgem]
rubygem-newgem-1.5.3-10.fc19.noarch requires rubygem(RedCloth)
[rubygem-pam]
rubygem-pam-1.5.4-14.fc19.armv7hl requires ruby(abi) >= 0:1.9
[rubygem-rack-mount]
rubygem-rack-mount-0.7.1-7.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-slim]
rubygem-slim-1.2.2-9.fc19.noarch requires rubygem(temple) < 0:0.5
rubygem-slim-1.2.2-9.fc19.noarch requires ruby(abi) = 0:1.9.1
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
[scirenderer]
scirenderer-1.0.7-1.fc19.noarch requires jogl2
[spacewalk-web]
spacewalk-dobby-1.9.22-2.fc19.noarch requires perl(Spacewalk::Setup)
[spatialite-tools]
spatialite-tools-3.1.0b-1.fc19.armv7hl requires libspatialite.so.3
[spring-installer]
ca-installer-20090316-13.fc19.armv7hl requires spring
spring-installer-20090316-13.fc19.armv7hl requires spring
[spring-maps-default]
spring-maps-default-0.1-10.fc19.noarch requires spring
[springlobby]
springlobby-0.147-4.fc19.armv7hl requires spring
[stp]
stp-0.1-12.20121002svn.fc19.armv7hl requires libcryptominisat-2.9.5.so
[synce-gnome]
synce-gnome-0.11-8.fc19.noarch requires odccm
[synce-kpm]
synce-kpm-0.15.1-5.fc19.noarch requires odccm
[syntastic]
syntastic-d-2.3.0-9.20120917git72856e6.fc19.noarch requires ldc
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[thermostat]
thermostat-0.6.0-12.fc19.armv7hl requires mongodb-server
thermostat-0.6.0-12.fc19.armv7hl requires mongodb
[tpp]
tpp-1.3.1-11.fc19.noarch requires ruby(abi) >= 0:1.8
[uwsgi]
uwsgi-plugin-php-1.2.6-8.fc19.armv7hl requires libphp5-5.4.so
uwsgi-plugin-rack-1.2.6-8.fc19.armv7hl requires libruby.so.1.9
uwsgi-plugin-ruby-1.2.6-8.fc19.armv7hl requires libruby.so.1.9
[vdsm]
vdsm-4.10.3-12.fc19.armv7hl requires qemu-kvm >= 2:0.15.0-4
vdsm-gluster-4.10.3-12.fc19.noarch requires glusterfs >= 0:3.4.0
vdsm-hook-fileinject-4.10.3-12.fc19.noarch requires python-libguestfs
[wallaby]
ruby-wallaby-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
wallaby-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
wallaby-http-server-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
wallaby-utils-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[weka]
weka-3.6.8-2.fc19.noarch requires javasqlite
[wxMaxima]
wxMaxima-12.09.0-2.fc19.armv7hl requires maxima >= 0:5.20
[xmms2]
xmms2-ruby-0.8-8.fc19.armv7hl requires ruby(abi) = 0:1.9.1
xmms2-ruby-0.8-8.fc19.armv7hl requires libruby.so.1.9
[zarafa]
php-mapi-7.0.13-1.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-mapi-7.0.13-1.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[zorba]
zorba-php-2.7.0-2.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
zorba-php-2.7.0-2.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
zorba-ruby-2.7.0-2.fc19.armv7hl requires ruby(abi) = 0:1.9.1
New package: xorg-x11-glamor-0.5.0-5.20130401git81aadb8.fc19
X.org glamor library
Updated Packages:
anaconda-19.20-1.fc19
---------------------
* Tue Apr 16 2013 Brian C. Lane <bcl(a)redhat.com> - 19.20-1
- Fix two more syntax errors in the custom spoke. (#952662) (dlehman)
* Mon Apr 15 2013 Brian C. Lane <bcl(a)redhat.com> - 19.19-1
- Show device size with full precision to avoid spurious resize. (#951276)
(dlehman)
- Fix another typo (old_fstype->old_fs_type). (#951593) (dlehman)
- Fix typo encryption_changed->changed_encryption. (#950700) (dlehman)
- Remove some remnants of old multipath code. (#951259) (dlehman)
- Protect the block device containing the stage2 image. (dlehman)
- Clarify code for iutil.get_active_console() etc. (wwoods)
* Thu Apr 11 2013 Brian C. Lane <bcl(a)redhat.com> - 19.18-1
- Revert "Revert "Don't emit "gfxterm" in grub2 configs (#821355)"" (pjones)
- Make "s" a hotkey for "Save Changes" on Advanced User Configuration. (pjones)
- Clean up tracebacks saved in pstore space (#950709) (pjones)
- Move anaconda-yum to /usr/libexec/anaconda/ (bcl)
- Cleanup: remove dead upgrade code (wwoods)
- Fix console= persistence, remove serial (#928269) (wwoods)
- Revert "Don't emit "gfxterm" in grub2 configs (#821355)" (pjones)
- Disable grub2-mkconfig's submenus by default. (pjones)
- Don't emit "gfxterm" in grub2 configs (#821355) (pjones)
- updates to boot-options.txt (wwoods)
- flags.py: remove unused flags (wwoods)
- remove flags.virtpconsole (wwoods)
- Call os.chdir("/") after calling os.chroot (vpodzime)
* Tue Apr 09 2013 Brian C. Lane <bcl(a)redhat.com> - 19.17-1
- Pass open file to execWithRedirect for vncpasswd (#948638) (bcl)
- Fix ip= saving in parse-kickstart (hamzy)
- Fix initial raid level when switching to a raid-capable device type.
(dlehman)
- The raid level combo cannot be not sensitive for preexisting devices.
(dlehman)
- Make sure fstype combo is not sensitive for btrfs devices. (dlehman)
- Add an entry to the raid level combo for btrfs' single. (dlehman)
- Clean up _save_right_side and adapt to changes in blivet.devicefactory.
(dlehman)
- Remove anaconda's udev rules. (dlehman)
- Add requires for some things that aren't strictly required by blivet.
(dlehman)
- Parent's finalize method needs self (vpodzime)
- Use Sphinx syntax for docstrings (vpodzime)
- Use None for unbounded size requests. (dlehman)
- Disable yum lock debugging for the final release. (clumens)
- The source spoke should display something nicer than "Not ready" (#948112).
(clumens)
- Don't run storage execution in an endless loop (#948331, #948285). (clumens)
- If an incorrect source is given for a ks install, don't fallback (#948212).
(clumens)
- Fix a bug when creating a new mountpoint with no given size (#948228).
(clumens)
- memInstalled has moved (#947261). (clumens)
- Correctly report an error if OSError is hit when setting up the source
(#947634). (clumens)
- Add anaconda-yum to %files (bcl)
* Thu Apr 04 2013 Brian C. Lane <bcl(a)redhat.com> - 19.16-1
- Modify LocaledWrapper to use our safe_dbus module (#928287) (vpodzime)
- Add module providing safe DBus operations (vpodzime)
- Define a DEFAULT_DBUS_TIMEOUT constant and use it (vpodzime)
- Execute the yum transaction in another process (bcl)
- Add anaconda-yum (bcl)
- Add execReadlines utility (bcl)
- Use namedtuple instead of our magic tuples (vpodzime)
- Tell python-meh architecture of the anaconda package (vpodzime)
- Add release number to the result of getAnacondaVersion (vpodzime)
- Fix _isys.so location in the updates.img (vpodzime)
- Network spoke: Fix reading of device type from combobox (#947120) (rvykydal)
Size change: 6770 bytes
kernel-3.9.0-0.rc6.git2.3.fc19
------------------------------
* Mon Apr 15 2013 Josh Boyer <jwboyer(a)redhat.com>
- Grab fixes for UEFI space issues (rhbz 947142)
* Fri Apr 12 2013 Josh Boyer <jwboyer(a)redhat.com>
- Enable CONFIG_LDM_PARTITION (rhbz 948636)
* Thu Apr 11 2013 Justin M. Forbes <jforbes(a)redhat.com> - 3.9.0-0.rc6.git2
- Linux v3.9-rc6-115-g7ee32a6
- libsas: use right function to alloc smp response (rhbz 949875)
- Reenable debugging options.
* Thu Apr 11 2013 Dave Jones <davej(a)redhat.com>
- Print out some extra debug information when we hit bad page tables.
* Tue Apr 09 2013 Peter Robinson <pbrobinson(a)fedoraproject.org>
- Add patch to fix building some ARM tegra modules
- Some minor ARM OMAP updates
* Mon Apr 08 2013 Justin M. Forbes <jforbes(a)redhat.com> - 3.9.0-0.rc6.git0.1
- Disable debugging options.
- Linux v3.9-rc6
* Fri Apr 05 2013 Justin M. Forbes <jforbes(a)redhat.com>
- Move cpufreq drivers to be modular (rhbz 746372)
* Wed Apr 03 2013 Dave Jones <davej(a)redhat.com>
- Enable MTD_CHAR/MTD_BLOCK (Needed for SFC)
Enable 10gigE on 64-bit only.
* Wed Apr 03 2013 Justin M. Forbes <jforbes(a)redhat.com> - 3.9.0-0.rc5.git2.1
- Linux v3.9-rc5-146-gda241ef
- Drop basrelease back to 1 until 3.9 is out of rc
* Wed Apr 03 2013 Peter Robinson <pbrobinson(a)fedoraproject.org>
- Add upstream usb-next OMAP patch to fix usb on omap/mvebu
Size change: 146709 bytes
libreoffice-4.0.2.2-2.fc19
--------------------------
* Fri Apr 05 2013 Kalev Lember <kalevlember(a)gmail.com> - 1:4.0.2.2-2
- Resolves: rhbz#949106 libreoffice drags in both openjdk 1.7.0 and 1.8.0
Size change: 260 bytes
lorax-19.2-1.fc19
-----------------
* Mon Apr 15 2013 Brian C. Lane <bcl(a)redhat.com> 19.2-1
- Let devices get detected and started automatically. (dlehman(a)redhat.com)
- Fix import of version (bcl(a)redhat.com)
- fix version query and add one to the log file (hamzy(a)us.ibm.com)
- Do not remove files required by tools from the s390utils-base package.
(jstodola(a)redhat.com)
Size change: 745 bytes
mesa-9.1-6.fc19
---------------
* Thu Apr 11 2013 Dave Airlie <airlied(a)redhat.com> 9.1-6
- enable glx tls for glamor to work properly
* Thu Apr 04 2013 Adam Jackson <ajax(a)redhat.com> 9.1-5
- Enable llvmpipe even on non-SSE2 machines (#909473)
* Tue Mar 26 2013 Adam Jackson <ajax(a)redhat.com> 9.1-4
- Fix build with private LLVM
Size change: 1336 bytes
python-blivet-0.11-1.fc19
-------------------------
* Mon Apr 15 2013 David Lehman <dlehman(a)redhat.com> - 0.11-1
- Fix handling of isohybrid media. (#950510) (dlehman)
- Fix getting dracut setup args from dasd.conf. (#950964) (dlehman)
* Tue Apr 09 2013 David Lehman <dlehman(a)redhat.com> - 0.10-1
- Extended partitions containing logical partitions are not leaves. (#949912) (dlehman)
- Remove devices in reverse order in Blivet.recursiveRemove. (#949912) (dlehman)
- Rewrite the DeviceFactory classes. (dlehman)
- Hook up error handling in installer-specific methods. (#948250) (dlehman)
- Don't traceback if fcoe.startup is called without fcoe utils present. (dlehman)
- Fix logic error that causes us to ignore disks in exclusiveDisks. (dlehman)
- Slightly improve currentSize for btrfs volumes. (dlehman)
- Simplify multipath handling. (dlehman)
- Don't expect anaconda udev rules to be in use. (dlehman)
- Drop requires for things only needed for OS installation. (dlehman)
- New version: 0.9 (bcl)
- Only install packages for devices and filesystems used by the OS. (dlehman)
- Fix LVMLogicalVolumeDevice.maxSize. (dlehman)
- Fix handling of name=None in newLV, newMDArray, newVG. (dlehman)
- Allow calls to suggestDeviceName with only a prefix argument. (dlehman)
- Move mdadm superblock size calculation into devicelibs.mdraid. (dlehman)
Size change: -113467 bytes
selinux-policy-3.12.1-28.fc19
-----------------------------
* Mon Apr 08 2013 Dan Walsh <dwalsh(a)redhat.com> 3.12.1-28
- Allow httpd_t to connect to osapi_compute port using httpd_use_openstack bolean
- Fixes for dlm_controld
- Fix apache_read_sys_content_rw_dirs() interface
- Allow logrotate to read /var/log/z-push dir
- Allow postfix_postdrop to acces postfix_public socket
- Allow sched_setscheduler for cupsd_t
- Add missing context for /usr/sbin/snmpd
- Allow consolehelper more access discovered by Tom London
- Allow fsdaemon to send signull to all domain
- Add port definition for osapi_compute port
- Allow unconfined to create /etc/hostname with correct labeling
- Add systemd_filetrans_named_hostname() interface
* Sat Apr 06 2013 Dan Walsh <dwalsh(a)redhat.com> 3.12.1-27
- Fix file_contexts.subs to label /run/lock correctly
* Fri Apr 05 2013 Miroslav Grepl <mgrepl(a)redhat.com> 3.12.1-26
- Try to label on controlC devices up to 30 correctly
- Add mount_rw_pid_files() interface
- Add additional mount/umount interfaces needed by mock
- fsadm_t sends audit messages in reads kernel_ipc_info when doing livecd-iso-to-disk
- Fix tabs
- Allow initrc_domain to search rgmanager lib files
- Add more fixes which make mock working together with confined users
* Allow mock_t to manage rpm files
* Allow mock_t to read rpm log files
* Allow mock to setattr on tmpfs, devpts
* Allow mount/umount filesystems
- Add rpm_read_log() interface
- yum-cron runs rpm from within it.
- Allow tuned to transition to dmidecode
- Allow firewalld to do net_admin
- Allow mock to unmont tmpfs_t
- Fix virt_sigkill() interface
- Add additional fixes for mock. Mainly caused by mount running in mock_t
- Allow mock to write sysfs_t and mount pid files
- Add mailman_domain to mailman_template()
- Allow openvswitch to execute shell
- Allow qpidd to use kerberos
- Allow mailman to use fusefs, needs back port to RHEL6
- Allow apache and its scripts to use anon_inodefs
- Add alias for git_user_content_t and git_sys_content_t so that RHEL6 will update to RHEL7
- Realmd needs to connect to samba ports, needs back port to F18 also
- Allow colord to read /run/initial-setup-
- Allow sanlock-helper to send sigkill to virtd which is registred to sanlock
- Add virt_kill() interface
- Add rgmanager_search_lib() interface
- Allow wdmd to getattr on all filesystems. Back ported from RHEL6
* Tue Apr 02 2013 Miroslav Grepl <mgrepl(a)redhat.com> 3.12.1-25
- Allow realmd to create tmp files
- FIx ircssi_home_t type to irssi_home_t
- Allow adcli running as realmd_t to connect to ldap port
- Allow NetworkManager to transition to ipsec_t, for running strongswan
- Make openshift_initrc_t an lxc_domain
- Allow gssd to manage user_tmp_t files
- Fix handling of irclogs in users homedir
- Fix labeling for drupal an wp-content in subdirs of /var/www/html
- Allow abrt to read utmp_t file
- Fix openshift policy to transition lnk_file, sock-file an fifo_file when created in a tmpfs_t, needs back port to RHEL6
- fix labeling for (oo|rhc)-restorer-wrapper.sh
- firewalld needs to be able to write to network sysctls
- Fix mozilla_plugin_dontaudit_rw_sem() interface
- Dontaudit generic ipc read/write to a mozilla_plugin for sandbox_x domains
- Add mozilla_plugin_dontaudit_rw_sem() interface
- Allow svirt_lxc_t to transition to openshift domains
- Allow condor domains block_suspend and dac_override caps
- Allow condor_master to read passd
- Allow condor_master to read system state
- Allow NetworkManager to transition to ipsec_t, for running strongswan
- Lots of access required by lvm_t to created encrypted usb device
- Allow xdm_t to dbus communicate with systemd_localed_t
- Label strongswan content as ipsec_exec_mgmt_t for now
- Allow users to dbus chat with systemd_localed
- Fix handling of .xsession-errors in xserver.if, so kde will work
- Might be a bug but we are seeing avc's about people status on init_t:service
- Make sure we label content under /var/run/lock as <<none>>
- Allow daemon and systemprocesses to search init_var_run_t directory
- Add boolean to allow xdm to write xauth data to the home directory
- Allow mount to write keys for the unconfined domain
- Add unconfined_write_keys() interface
* Tue Mar 26 2013 Miroslav Grepl <mgrepl(a)redhat.com> 3.12.1-24
- Add labeling for /usr/share/pki
- Allow programs that read var_run_t symlinks also read var_t symlinks
- Add additional ports as mongod_port_t for 27018, 27019, 28017, 28018 and 28019 ports
- Fix labeling for /etc/dhcp directory
- add missing systemd_stub_unit_file() interface
- Add files_stub_var() interface
- Add lables for cert_t directories
- Make localectl set-x11-keymap working at all
- Allow abrt to manage mock build environments to catch build problems.
- Allow virt_domains to setsched for running gdb on itself
- Allow thumb_t to execute user home content
- Allow pulseaudio running as mozilla_plugin_t to read /run/systemd/users/1000
- Allow certwatch to execut /usr/bin/httpd
- Allow cgred to send signal perms to itself, needs back port to RHEL6
- Allow openshift_cron_t to look at quota
- Allow cups_t to read inhered tmpfs_t from the kernel
- Allow yppasswdd to use NIS
- Tuned wants sys_rawio capability
- Add ftpd_use_fusefs boolean
- Allow dirsrvadmin_t to signal itself
Size change: 6985 bytes
xorg-x11-drv-ati-7.1.0-5.20130408git6e74aacc5.fc19
--------------------------------------------------
* Thu Apr 11 2013 Jerome Glisse <jglisse(a)redhat.com> 7.1.0-5
- No need to patch for enabling glamor with git snapshot
* Mon Apr 08 2013 Jerome Glisse <jglisse(a)redhat.com> 7.1.0-4
- Git snapshot
- Enable glamor acceleration for southern island GPU
Size change: -592599 bytes
Summary:
Added Packages: 1
Removed Packages: 0
Upgraded Packages: 8
Size of added packages: 106514 (104 k)
Size change of modified packages: -543261 (-531 k)
Size of removed packages: 0 (0 )
Size change: -436747 (-427 k)
Compose finished at Fri Apr 19 12:10:28 UTC 2013
11 years
arm rawhide report: 20130419 changes
by Fedora compose checker
Compose started at Fri Apr 19 08:10:03 UTC 2013
Broken deps for armhfp
----------------------------------------------------------
[R-ALL]
R-ALL-1.4.14-1.fc20.noarch requires R-core >= 0:3.0.0
[R-AnnotationDbi]
R-AnnotationDbi-1.22.1-1.fc20.noarch requires R-core >= 0:3.0.0
[R-BSgenome]
R-BSgenome-1.28.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-BSgenome.Celegans.UCSC.ce2]
R-BSgenome.Celegans.UCSC.ce2-1.3.19-3.fc20.noarch requires R-core >= 0:3.0.0
[R-BiocGenerics]
R-BiocGenerics-0.6.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-DBI]
R-DBI-0.2.5-7.fc20.noarch requires R-core >= 0:3.0.0
[R-DynDoc]
R-DynDoc-1.38.0-1.fc20.noarch requires R-core >= 0:3.0.0
R-DynDoc-1.38.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-GenomicFeatures]
R-GenomicFeatures-1.12.0-1.fc20.noarch requires R-rtracklayer
R-GenomicFeatures-1.12.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-RM2]
R-RM2-0.0-12.fc20.noarch requires R-core >= 0:3.0.0
[R-abind]
R-abind-1.4.0-5.fc20.noarch requires R-core >= 0:3.0.0
[R-affydata]
R-affydata-1.11.18-1.fc20.noarch requires R-core >= 0:3.0.0
[R-biomaRt]
R-biomaRt-2.16.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-car]
R-car-2.0.16-1.fc20.noarch requires R-core >= 0:3.0.0
[R-fibroEset]
R-fibroEset-1.4.9-1.fc20.noarch requires R-core >= 0:3.0.0
[R-hgu133acdf]
R-hgu133acdf-2.12.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-hgu95av2cdf]
R-hgu95av2cdf-2.12.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-hgu95av2probe]
R-hgu95av2probe-2.12.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-multcomp]
R-multcomp-1.2.17-1.fc20.noarch requires R-core >= 0:3.0.0
[R-nws]
1:R-nws-1.7.0.1-7.fc20.noarch requires R-core >= 0:3.0.0
[R-qvalue]
R-qvalue-1.34.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-systemfit]
R-systemfit-1.1.15-4.fc20.noarch requires R-core >= 0:3.0.0
[R-timeDate]
R-timeDate-2160.97-1.fc20.noarch requires R-core >= 0:3.0.0
[R-tkWidgets]
R-tkWidgets-1.38.0-1.fc20.noarch requires R-core >= 0:3.0.0
[R-widgetTools]
R-widgetTools-1.38.0-1.fc20.noarch requires R-core >= 0:3.0.0
[RepetierHost]
RepetierHost-0.84-1.fc19.noarch requires mono(OpenTK.GLControl) = 0:1.1.0.0
RepetierHost-0.84-1.fc19.noarch requires mono(OpenTK) = 0:1.1.0.0
[aeolus-conductor]
aeolus-all-0.10.6-2.fc19.noarch requires mongodb-server
aeolus-all-0.10.6-2.fc19.noarch requires iwhd
aeolus-conductor-0.10.6-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[alsa-firmware]
alsa-firmware-1.0.27-1.fc20.noarch requires alsa-tools-firmware >= 0:1.0.27
[amide]
amide-1.0.0-4.fc19.armv7hl requires libvolpack.so.1
[bochs]
bochs-2.6.1-1.fc20.armv7hl requires bochs-bios = 0:2.6.1-1.fc20
[clementine]
clementine-1.1.1-1.fc19.armv7hl requires libprotobuf.so.7
clementine-1.1.1-1.fc19.armv7hl requires libimobiledevice.so.3
[cloud-init]
cloud-init-0.7.1-4.fc20.noarch requires dmidecode
[coccinella]
coccinella-0.96.20-5.fc19.noarch requires iaxclient
[condor-cloud]
condor-cloud-0.1-6.fc19.noarch requires qemu-kvm >= 0:0.14
condor-cloud-node-0.1-6.fc19.noarch requires qemu-kvm >= 0:0.14
[connman]
connman-1.5-4.fc19.armv7hl requires libxtables.so.7
connman-1.5-4.fc19.armv7hl requires libgnutls.so.26(GNUTLS_1_4)
connman-1.5-4.fc19.armv7hl requires libgnutls.so.26
[csmith]
csmith-2.1.0-8.fc19.armv7hl requires perl(Sys::CPU)
[deltacloud-core]
deltacloud-core-1.0.5-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[eg]
eg-1.7.5.2-1.fc20.noarch requires perl(one)
eg-1.7.5.2-1.fc20.noarch requires perl(it)
eg-1.7.5.2-1.fc20.noarch requires perl(an)
[flowcanvas]
flowcanvas-0.7.1-8.fc18.armv7hl requires libgraph.so.5
[gauche-gtk]
1:gauche-gtk-0.6-0.8.20120403gitf7d3f802f3750.fc19.armv7hl requires libgauche-0.9.so.0.2
[gdal]
gdal-1.9.2-1.fc19.armv7hl requires libspatialite.so.3
gdal-1.9.2-1.fc19.armv7hl requires libcfitsio.so.0
gdal-java-1.9.2-1.fc19.armv7hl requires libspatialite.so.3
gdal-java-1.9.2-1.fc19.armv7hl requires libcfitsio.so.0
gdal-libs-1.9.2-1.fc19.armv7hl requires libspatialite.so.3
gdal-libs-1.9.2-1.fc19.armv7hl requires libcfitsio.so.0
gdal-perl-1.9.2-1.fc19.armv7hl requires libspatialite.so.3
gdal-perl-1.9.2-1.fc19.armv7hl requires libcfitsio.so.0
gdal-ruby-1.9.2-1.fc19.armv7hl requires ruby(abi) = 0:1.9.1
gdal-ruby-1.9.2-1.fc19.armv7hl requires libspatialite.so.3
gdal-ruby-1.9.2-1.fc19.armv7hl requires libruby.so.1.9
gdal-ruby-1.9.2-1.fc19.armv7hl requires libcfitsio.so.0
[gnome-applet-sensors]
gnome-applet-sensors-3.0.0-4.fc18.armv7hl requires libpanel-applet-4.so.0
[gnome-applets]
1:gnome-applets-3.5.92-3.fc18.armv7hl requires libpanel-applet-4.so.0
1:gnome-applets-3.5.92-3.fc18.armv7hl requires libgweather-3.so.1
[gnome-boxes]
gnome-boxes-3.8.0-1.fc20.armv7hl requires libvirt-daemon-kvm
[gnome-pie]
gnome-pie-0.5.3-3.20120826git1b93e1.fc19.armv7hl requires libbamf3.so.0
[gnome-shell-extensions]
gnome-shell-extension-common-3.8.1-1.fc20.noarch requires gnome-shell >= 0:3.8.1
[gnomint]
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26(GNUTLS_2_8)
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26(GNUTLS_1_4)
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26
[gooddata-cl]
gooddata-cl-1.2.56-2.fc19.noarch requires gdata-java
[imagefactory]
imagefactory-1.1.2-1.fc19.noarch requires python-libguestfs
imagefactory-1.1.2-1.fc19.noarch requires iwhd >= 0:1.2
[kawa]
1:kawa-1.11-5.fc19.armv7hl requires servlet25
[libkolab]
php-kolab-0.4.1-3.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-kolab-0.4.1-3.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[librasterlite]
librasterlite-1.1c-5.fc19.armv7hl requires libspatialite.so.3
[livecd-tools]
1:livecd-tools-19.2-1.fc20.armv7hl requires hfsplus-tools
[liveusb-creator]
liveusb-creator-3.11.7-3.fc19.noarch requires syslinux-extlinux
liveusb-creator-3.11.7-3.fc19.noarch requires syslinux
[logwatch]
logwatch-7.4.0-24.20130102svn127.fc19.noarch requires perl(Sys::CPU)
[mapserver]
php-mapserver-6.0.3-9.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-mapserver-6.0.3-9.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[mingw-qt5-qtdeclarative]
mingw32-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw32(qt5widgets.dll)
mingw32-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw32(qt5test.dll)
mingw32-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw32(qt5sql.dll)
mingw32-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw32(qt5network.dll)
mingw32-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw32(qt5gui.dll)
mingw32-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw32(qt5core.dll)
mingw64-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw64(qt5widgets.dll)
mingw64-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw64(qt5test.dll)
mingw64-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw64(qt5sql.dll)
mingw64-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw64(qt5network.dll)
mingw64-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw64(qt5gui.dll)
mingw64-qt5-qtdeclarative-5.0.1-1.fc20.noarch requires mingw64(qt5core.dll)
[mingw-qt5-qtquick1]
mingw32-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw32(qt5widgets.dll)
mingw32-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw32(qt5sql.dll)
mingw32-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw32(qt5opengl.dll)
mingw32-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw32(qt5network.dll)
mingw32-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw32(qt5gui.dll)
mingw32-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw32(qt5core.dll)
mingw64-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw64(qt5widgets.dll)
mingw64-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw64(qt5sql.dll)
mingw64-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw64(qt5opengl.dll)
mingw64-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw64(qt5network.dll)
mingw64-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw64(qt5gui.dll)
mingw64-qt5-qtquick1-5.0.1-1.fc20.noarch requires mingw64(qt5core.dll)
[mingw-qt5-qtscript]
mingw32-qt5-qtscript-5.0.1-1.fc20.noarch requires mingw32(qt5widgets.dll)
mingw32-qt5-qtscript-5.0.1-1.fc20.noarch requires mingw32(qt5gui.dll)
mingw32-qt5-qtscript-5.0.1-1.fc20.noarch requires mingw32(qt5core.dll)
mingw64-qt5-qtscript-5.0.1-1.fc20.noarch requires mingw64(qt5widgets.dll)
mingw64-qt5-qtscript-5.0.1-1.fc20.noarch requires mingw64(qt5gui.dll)
mingw64-qt5-qtscript-5.0.1-1.fc20.noarch requires mingw64(qt5core.dll)
[mingw-qwt]
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtxmld4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtxml4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtsvgd4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtsvg4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtguid4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtgui4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtcored4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtcore4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtxmld4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtxml4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtsvgd4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtsvg4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtguid4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtgui4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtcored4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtcore4.dll)
[msp430-libc]
msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3
[mygui]
mygui-3.2.0-4.fc20.armv7hl requires libCommon.so
mygui-demos-3.2.0-4.fc20.armv7hl requires libCommon.so
mygui-tools-3.2.0-4.fc20.armv7hl requires libCommon.so
[nightview]
nightview-cli-0.3.3-7.fc18.armv7hl requires libcfitsio.so.0
nightview-gui-0.3.3-7.fc18.armv7hl requires libcfitsio.so.0
[nodejs-millstone]
nodejs-millstone-0.5.15-3.fc20.noarch requires npm(srs) < 0:0.3
nodejs-millstone-0.5.15-3.fc20.noarch requires npm(srs) >= 0:0.2.20
[nodejs-uglify-js]
nodejs-uglify-js-2.2.5-2.fc20.noarch requires npm(optimist) < 0:0.4
[ooo2gd]
ooo2gd-3.0.0-6.fc19.armv7hl requires gdata-java
[openpts]
openpts-0.2.6-6.fc19.armv7hl requires tboot
[openshift-origin-broker]
openshift-origin-broker-1.4.1-1.fc19.noarch requires mongodb-server
[openstack-nova]
openstack-nova-compute-2013.1-2.fc20.noarch requires qemu-kvm
openstack-nova-compute-2013.1-2.fc20.noarch requires python-libguestfs
[ovirt-engine]
ovirt-engine-notification-service-3.1.0-1.fc19.noarch requires classpathx-mail
[ovirt-node]
ovirt-node-2.6.0-1.fc19.noarch requires grub2
ovirt-node-plugin-cim-2.6.0-1.fc19.noarch requires libvirt-cim
[oz]
oz-0.10.0-1.fc19.noarch requires python-libguestfs >= 0:1.18
oz-0.10.0-1.fc19.noarch requires libvirt-daemon-kvm
[pacemaker]
pacemaker-1.1.9-0.1.70ad9fa.git.fc19.armv7hl requires resource-agents
[pagekite]
pagekite-0.5.5a-3.fc20.noarch requires python-SocksipyChain
[perl-Bio-ASN1-EntrezGene]
perl-Bio-ASN1-EntrezGene-1.091-17.fc19.noarch requires perl(Bio::Index::AbstractSeq)
[perl-Bio-SamTools]
perl-Bio-SamTools-1.35-2.fc19.armv7hl requires perl(Bio::SeqFeature::Lite)
perl-Bio-SamTools-1.35-2.fc19.armv7hl requires perl(Bio::PrimarySeq)
[perl-Math-Clipper]
perl-Math-Clipper-1.17-3.fc19.armv7hl requires libpolyclipping.so.5
[perl-YAML-Parser-Syck]
perl-YAML-Parser-Syck-0.01-24.fc19.armv7hl requires libsyck.so.0
[pfstools]
pfstools-1.8.5-6.fc19.armv7hl requires libMagickCore.so.5
pfstools-1.8.5-6.fc19.armv7hl requires libMagick++.so.5
pfstools-imgmagick-1.8.5-6.fc19.armv7hl requires libMagickCore.so.5
pfstools-imgmagick-1.8.5-6.fc19.armv7hl requires libMagick++.so.5
[php-xcache]
php-xcache-3.0.1-2.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-xcache-3.0.1-2.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[rootplot]
rootplot-2.2.1-7.fc19.noarch requires root-python
[rubygem-aeolus-cli]
rubygem-aeolus-cli-0.5.0-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-aeolus-image]
rubygem-aeolus-image-0.5.0-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-boxgrinder-build]
rubygem-boxgrinder-build-0.10.4-3.fc20.noarch requires ruby-libguestfs
[rubygem-cucumber]
rubygem-cucumber-1.2.1-3.fc19.noarch requires rubygem(gherkin) >= 0:2.4.5
[rubygem-gem2rpm]
rubygem-gem2rpm-0.8.1-2.fc18.noarch requires ruby(abi) = 0:1.9.1
[rubygem-openshift-origin-node]
rubygem-openshift-origin-node-1.5.17-2.fc20.noarch requires pam_openshift
[rubygem-pam]
rubygem-pam-1.5.4-14.fc20.armv7hl requires ruby(abi) >= 0:1.9
[rubygem-redcarpet]
rubygem-redcarpet-2.1.1-5.fc18.armv7hl requires ruby(abi) = 0:1.9.1
rubygem-redcarpet-2.1.1-5.fc18.armv7hl requires libruby.so.1.9
[sblim-cim-client]
sblim-cim-client-1.3.9.3-4.fc19.noarch requires tog-pegasus >= 2:2.5.1
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
[scirenderer]
scirenderer-1.1.0-1.fc20.noarch requires jogl2
[spacewalk-web]
spacewalk-dobby-1.9.22-2.fc19.noarch requires perl(Spacewalk::Setup)
[spring-installer]
ca-installer-20090316-13.fc19.armv7hl requires spring
spring-installer-20090316-13.fc19.armv7hl requires spring
[spring-maps-default]
spring-maps-default-0.1-10.fc19.noarch requires spring
[springlobby]
springlobby-0.169-2.fc20.armv7hl requires spring
springlobby-0.169-2.fc20.armv7hl requires 8b0356ea0472ca9c430944a69a94798d8528db.debug
springlobby-0.169-2.fc20.armv7hl requires 895cd425a48bca347866b6056fd99198cdbfab.debug
[synce-gnome]
synce-gnome-0.11-8.fc19.noarch requires odccm
[synce-kpm]
synce-kpm-0.15.1-5.fc19.noarch requires odccm
[syntastic]
syntastic-d-2.3.0-9.20120917git72856e6.fc19.noarch requires ldc
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[thermostat]
thermostat-0.6.0-12.fc20.armv7hl requires mongodb-server
thermostat-0.6.0-12.fc20.armv7hl requires mongodb
[vdsm]
vdsm-4.10.3-13.fc20.armv7hl requires qemu-kvm >= 2:0.15.0-4
vdsm-hook-fileinject-4.10.3-13.fc20.noarch requires python-libguestfs
[weka]
weka-3.6.8-2.fc19.noarch requires javasqlite
[wxMaxima]
wxMaxima-12.09.0-2.fc19.armv7hl requires maxima >= 0:5.20
[xastir]
1:xastir-2.0.0-7.fc19.armv7hl requires libMagickCore.so.5
[zarafa]
php-mapi-7.0.13-1.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-mapi-7.0.13-1.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[zorba]
zorba-php-2.7.0-2.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
zorba-php-2.7.0-2.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
zorba-ruby-2.7.0-2.fc19.armv7hl requires ruby(abi) = 0:1.9.1
New package: nodejs-vows-0.7.0-4.fc20
Asynchronous behavior-driven development (BDD) and continuous integration
New package: perl-ElasticSearch-0.64-2.fc20
API for communicating with ElasticSearch
New package: perl-JSON-Pointer-0.01-1.fc20
Perl implementation of JSON Pointer
Updated Packages:
ack-2.00-1.fc20
---------------
* Thu Apr 18 2013 Robin Lee <cheeselee(a)fedoraproject.org> - 2.00-1
- Update to 2.0
Size change: 72408 bytes
glances-1.6.1-1.fc20
--------------------
* Thu Apr 18 2013 Michel Salim <salimma(a)fedoraproject.org> - 1.6.1-1
- Update to 1.6.1
* Tue Mar 19 2013 Michel Salim <salimma(a)fedoraproject.org> - 1.6-2
- On el5, build against python26 stack
Size change: 530 bytes
jetty-9.0.0-3.fc20
------------------
* Thu Apr 18 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 9.0.0-3
- Remove maven-license-plugin
- Conditionally disable jetty-spring
- Fix OSGi conditionals
Size change: 206 bytes
linux-firmware-20130418-0.1.gitb584174.fc20
-------------------------------------------
* Thu Apr 18 2013 Josh Boyer <jwboyer(a)redhat.com> - 20130418-0.1.gitb584174
- Update to latest upstream git tree
Size change: 1056707 bytes
maven-verifier-1.4-4.fc20
-------------------------
* Fri Apr 19 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 1.4-4
- Update to maven-shared-utils 0.3
Size change: 192 bytes
mock-1.1.32-1.fc20
------------------
* Thu Apr 18 2013 Clark Williams <williams(a)redhat.com> - 1.1.32-1
- fixed post scriptlet to use correct keyword to getent
Size change: 345 bytes
perl-Debug-Client-0.25-1.fc20
-----------------------------
* Thu Apr 18 2013 Jitka Plesnikova <jplesnik(a)redhat.com> - 0.25-1
- 0.25 bump
Size change: -1959 bytes
perl-HTTP-Tiny-0.029-1.fc20
---------------------------
* Thu Apr 18 2013 Petr Pisar <ppisar(a)redhat.com> - 0.029-1
- 0.029 bump
Size change: 372 bytes
perl-Module-ExtractUse-0.30-1.fc20
----------------------------------
* Thu Apr 18 2013 Paul Howarth <paul(a)city-fan.org> - 0.30-1
- Update to 0.30
- Add accessors and tests for _in_eval/_out_of_eval
- Reworked 80_failing.t to TODO tests
- Added more require-in-string corner test cases
- Fix the case for eval["']expr["'] and add regression tests
Size change: 553 bytes
perl-Test-Class-0.39-1.fc20
---------------------------
* Thu Apr 18 2013 Petr Pisar <ppisar(a)redhat.com> - 0.39-1
- 0.39 bump
Size change: -392 bytes
php-deepend-Mockery-0.8.0-1.fc20
--------------------------------
* Thu Apr 18 2013 Christof Damian <christof(a)damian.net> - 0.8.0-1
- upstream 0.8.0
Size change: 2416 bytes
php-digitalsandwich-Phake-1.0.2-4.fc20
--------------------------------------
Size change: -1104 bytes
php-swift-Swift-4.3.1-1.fc20
----------------------------
* Thu Apr 18 2013 Christof Damian <christof(a)damian.net> - 4.3.1-1
- upstream 4.3.1
Size change: -449 bytes
pyflakes-0.7-1.fc20
-------------------
* Thu Apr 18 2013 Ville Skyttä <ville.skytta(a)iki.fi> - 0.7-1
- Update to 0.7.
Size change: 2627 bytes
python-django-extensions-1.1.1-1.fc20
-------------------------------------
* Thu Apr 18 2013 Richard Marko <rmarko(a)fedoraproject.org> - 1.1.1-1
- New version
Size change: -156543 bytes
python-fdb-1.1-1.fc20
---------------------
* Thu Apr 18 2013 Philippe Makowski <makowski(a)fedoraproject.org> 1.1-1
- New upstream 1.1 fix bug PYFB-30 - BLOBs are truncated at first zero byte
* Mon Apr 01 2013 Philippe Makowski <makowski(a)fedoraproject.org> 1.0-1
- New upstream 1.0
Size change: 2615 bytes
selinux-policy-3.12.1-32.fc20
-----------------------------
* Wed Apr 17 2013 Miroslav Grepl <mgrepl(a)redhat.com> 3.12.1-32
- Allow realmd to run ipa, really needs to be an unconfined_domain
- Allow sandbox domains to use inherted terminals
- Allow pscd to use devices labeled svirt_image_t in order to use cat cards.
- Add label for new alsa pid
- Alsa now uses a pid file and needs to setsched
- Fix oracleasmfs_t definition
- Add support for sshd_unit_file_t
- Add oracleasmfs_t
- Allow unlabeled_t files to be stored on unlabeled_t filesystems
Size change: 1462 bytes
system-config-services-0.101.9-1.fc20
-------------------------------------
* Thu Apr 18 2013 Nils Philippsen <nils(a)redhat.com> - 0.101.9-1
- version 0.101.9:
- catch "file not found" exceptions while enabling/disabling units
- catch gtk import errors (missing display, etc., #884944)
Size change: -781 bytes
youtube-dl-2013.04.18-1.fc20
----------------------------
* Thu Apr 18 2013 Till Maas <opensource(a)till.name> - 2013.04.18-1
- Update to new release
Size change: 8758 bytes
yum-3.4.3-84.fc20
-----------------
* Thu Apr 18 2013 James Antill <james at fedoraproject.org> - 3.4.3-84
- update to latest HEAD.
- Move yum-security into core.
- A bunch of minor fixes for yum-cron.
- Update yum-cron to add security/minimal/etc. updates.
- Add socks support to proxy config.
Size change: 8787 bytes
yum-utils-1.1.31-14.fc20
------------------------
* Thu Apr 18 2013 Zdenek Pavlas <zpavlas(a)redhat.com> - 1.1.31-14
- yum-utils.bash: load yum.bash first
Size change: 220 bytes
Summary:
Added Packages: 3
Removed Packages: 0
Upgraded Packages: 21
Size of added packages: 218383 (213 k)
Size change of modified packages: 996970 (974 k)
Size of removed packages: 0 (0 )
Size change: 1215353 (1.2 M)
Compose finisheded at Fri Apr 19 09:26:28 UTC 2013
11 years
f18 updates
by Robert Moskowitz
I am kind of up and running on my pogo with the f18 img.
So I am trying to set things up a bit like I like then and first try
running 'yum update'. 172 package need updating, but only117Mb!
Quite a list of things. Is this correct? Should I really do this?
Well I guess I really need to stay current, it seems that this image is
suppose to be current, but this is a lot to update...
No new kernel at least.
11 years
trying to move ssh to a different port
by Robert Moskowitz
I always move sshd from port 22 to port nnn. To do this I use semanage
(which I had to install):
semanage port -a -t ssh_port_t -p tcp nnn
then edit /etc/ssh/sshd_config to point to port nnn.
then I edit iptables (which is off on this install, interesting, though
selinux is not) to open up port nnn.
Finally I restart sshd.
Well, first off I am sshed into the box doing this on port 22. status of
sshd is it is listening on port nnn. I tried opening another ssh
session (without stoping the one running right now), to port and get:
No route to host
To the old port 22 I get
Connection refused.
I do this all the time with Fedora and Centos. What am I missing on
this system?
I put the port back to 22 until I figure this out.
11 years
Re: [fedora-arm] Bad image/instructions? - Re: Problems with a pogoplug v02
by Robert Moskowitz
On 04/18/2013 04:26 PM, Derek Atkins wrote:
> On Thu, April 18, 2013 4:19 pm, Robert Moskowitz wrote:
>>
>> # NOTE: substitute "usb 1:1" with "usb 0:1" on non-Plus model devices,
>> or try:
>> usb start
>> ext2ls usb x:1
>> #where x can be any integer but usually 0-3, the right number will show
>> a directory listing including the files uInitrd and uImage
>>
>> Well no usb or ext2ls commands. I searched all over the image. I ran
>> updatedb, the tried locate. Nothing. Now what?
> usb and ext2ls commands are "uboot" commands when you're sitting in the
> uboot shell. Also, you might need a "newer" version of uboot to get ext
> support.
Hi, Derek, long time no see :)
Fancy meeting you here.
I read the instructions again, and see I missed an important part:
"Depending on the model/version of the plug/uboot, additional uboot
parameters may be necessary or the existing ones could be edited. To do
that, stop the boot process during the countdown and follow the
instructions here. The Fedora 18 Kirkwood images contain an ext3
filesystem that cannot be booted directly by certain plugs (such as the
GuruPlug) at this time. Please follow the appropriate installation
instructions for your device."
So fortunately I am still getting that netconsole to interupt the boot
process and issue these commands...
I am going back to that 8Gb usb drive first. If it works, it gives me
more room to put software on the system.
11 years
arm F-19 Branched report: 20130418 changes
by Fedora compose checker
Compose started at Thu Apr 18 11:10:04 UTC 2013
Broken deps for armhfp
----------------------------------------------------------
[R-GenomicFeatures]
R-GenomicFeatures-1.6.1-3.fc18.noarch requires R-rtracklayer
[RepetierHost]
RepetierHost-0.84-1.fc19.noarch requires mono(OpenTK.GLControl) = 0:1.1.0.0
RepetierHost-0.84-1.fc19.noarch requires mono(OpenTK) = 0:1.1.0.0
[aeolus-conductor]
aeolus-all-0.10.6-2.fc19.noarch requires mongodb-server
aeolus-all-0.10.6-2.fc19.noarch requires iwhd
aeolus-conductor-0.10.6-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[alexandria]
alexandria-0.6.9-4.fc19.noarch requires ruby(abi) >= 0:1.9.1
[amide]
amide-1.0.0-4.fc19.armv7hl requires libvolpack.so.1
[bochs]
bochs-2.6-2.fc19.armv7hl requires bochs-bios = 0:2.6-2.fc19
[clementine]
clementine-1.1.1-1.fc19.armv7hl requires libprotobuf.so.7
clementine-1.1.1-1.fc19.armv7hl requires libimobiledevice.so.3
[cloud-init]
cloud-init-0.7.1-3.fc19.noarch requires dmidecode
[coccinella]
coccinella-0.96.20-5.fc19.noarch requires iaxclient
[condor-cloud]
condor-cloud-0.1-6.fc19.noarch requires qemu-kvm >= 0:0.14
condor-cloud-node-0.1-6.fc19.noarch requires qemu-kvm >= 0:0.14
[connman]
connman-1.5-4.fc19.armv7hl requires libxtables.so.7
connman-1.5-4.fc19.armv7hl requires libgnutls.so.26(GNUTLS_1_4)
connman-1.5-4.fc19.armv7hl requires libgnutls.so.26
[csmith]
csmith-2.1.0-8.fc19.armv7hl requires perl(Sys::CPU)
[deltacloud-core]
deltacloud-core-1.0.5-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[denemo]
denemo-0.9.4-0.fc18.armv7hl requires libgtksourceview-3.0.so.0
[devtodo2]
devtodo2-2.1-3.20120711git8dee6.fc19.armv7hl requires libgo.so.0
[eruby]
eruby-1.0.5-19.fc18.armv7hl requires libruby.so.1.9
eruby-libs-1.0.5-19.fc18.armv7hl requires ruby(abi) >= 0:1.9.0
eruby-libs-1.0.5-19.fc18.armv7hl requires libruby.so.1.9
[fcitx-libpinyin]
fcitx-libpinyin-0.2.1-1.fc19.armv7hl requires libpinyin.so.2(LIBPINYIN)
fcitx-libpinyin-0.2.1-1.fc19.armv7hl requires libpinyin.so.2
[flowcanvas]
flowcanvas-0.7.1-8.fc18.armv7hl requires libgraph.so.5
[gauche-gtk]
1:gauche-gtk-0.6-0.8.20120403gitf7d3f802f3750.fc19.armv7hl requires libgauche-0.9.so.0.2
[gdal]
gdal-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-java-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-libs-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-perl-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
gdal-ruby-1.9.2-4.fc19.armv7hl requires libspatialite.so.3
[gdcm]
gdcm-2.0.18-6.fc18.armv7hl requires libpoppler.so.26
[gearbox]
gearbox-10.11-3.fc19.armv7hl requires libIceUtil.so.35b
[ghc-hakyll]
ghc-hakyll-devel-3.4.0.0-3.fc19.armv7hl requires ghc-devel(hamlet-1.1.6.3-6690965f99be1c8cbd4475b13c7d8a9b)
[gnome-applets]
1:gnome-applets-3.5.92-3.fc18.armv7hl requires libgweather-3.so.1
[gnome-boxes]
gnome-boxes-3.8.0-1.fc19.armv7hl requires libvirt-daemon-kvm
[gnome-panel]
gnome-panel-3.6.2-5.fc19.armv7hl requires libgnome-desktop-3.so.5
gnome-panel-devel-3.6.2-5.fc19.armv7hl requires libgnome-desktop-3.so.5
[gnome-pie]
gnome-pie-0.5.3-3.20120826git1b93e1.fc19.armv7hl requires libbamf3.so.0
[gnomint]
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26(GNUTLS_2_8)
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26(GNUTLS_1_4)
gnomint-1.2.1-5.fc18.armv7hl requires libgnutls.so.26
[gooddata-cl]
gooddata-cl-1.2.56-2.fc19.noarch requires gdata-java
[gorm]
gorm-1.2.18-1.fc19.armv7hl requires libgnustep-gui.so.0.22
[imagefactory]
imagefactory-1.1.2-1.fc19.noarch requires python-libguestfs
imagefactory-1.1.2-1.fc19.noarch requires iwhd >= 0:1.2
[kawa]
1:kawa-1.11-5.fc19.armv7hl requires servlet25
[libkolab]
php-kolab-0.4.1-3.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-kolab-0.4.1-3.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[librasterlite]
librasterlite-1.1c-5.fc19.armv7hl requires libspatialite.so.3
[livecd-tools]
1:livecd-tools-19.1-1.fc19.armv7hl requires hfsplus-tools
[liveusb-creator]
liveusb-creator-3.11.7-3.fc19.noarch requires syslinux-extlinux
liveusb-creator-3.11.7-3.fc19.noarch requires syslinux
[logwatch]
logwatch-7.4.0-24.20130102svn127.fc19.noarch requires perl(Sys::CPU)
[mingw-qt5-qtscript]
mingw32-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw32(qt5widgets.dll)
mingw32-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw32(qt5gui.dll)
mingw32-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw32(qt5core.dll)
mingw64-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw64(qt5widgets.dll)
mingw64-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw64(qt5gui.dll)
mingw64-qt5-qtscript-5.0.1-1.fc19.noarch requires mingw64(qt5core.dll)
[mingw-qwt]
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtxmld4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtxml4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtsvgd4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtsvg4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtguid4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtgui4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtcored4.dll)
mingw32-qwt-6.0.1-2.fc19.noarch requires mingw32(qtcore4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtxmld4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtxml4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtsvgd4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtsvg4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtguid4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtgui4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtcored4.dll)
mingw64-qwt-6.0.1-2.fc19.noarch requires mingw64(qtcore4.dll)
[msp430-libc]
msp430-libc-20120224-2.fc19.noarch requires msp430-gcc >= 0:4.6.3
[mumble]
murmur-1.2.3-12.fc19.armv7hl requires libIceUtil.so.35b
murmur-1.2.3-12.fc19.armv7hl requires libIce.so.35b
[mygui]
mygui-3.2.0-4.fc19.armv7hl requires libCommon.so
mygui-demos-3.2.0-4.fc19.armv7hl requires libCommon.so
mygui-tools-3.2.0-4.fc19.armv7hl requires libCommon.so
[nightview]
nightview-cli-0.3.3-7.fc18.armv7hl requires libcfitsio.so.0
nightview-gui-0.3.3-7.fc18.armv7hl requires libcfitsio.so.0
[ooo2gd]
ooo2gd-3.0.0-6.fc19.armv7hl requires gdata-java
[openpts]
openpts-0.2.6-6.fc19.armv7hl requires tboot
[openshift-origin-broker]
openshift-origin-broker-1.5.1-1.fc19.noarch requires mongodb-server
[openstack-nova]
openstack-nova-compute-2013.1-0.11.rc1.fc19.noarch requires qemu-kvm
openstack-nova-compute-2013.1-0.11.rc1.fc19.noarch requires python-libguestfs
[ovirt-engine]
ovirt-engine-notification-service-3.1.0-1.fc19.noarch requires classpathx-mail
[ovirt-node]
ovirt-node-2.6.0-1.fc19.noarch requires grub2
ovirt-node-plugin-cim-2.6.0-1.fc19.noarch requires libvirt-cim
[oz]
oz-0.10.0-1.fc19.noarch requires python-libguestfs >= 0:1.18
oz-0.10.0-1.fc19.noarch requires libvirt-daemon-kvm
[pdns]
pdns-3.1-4.fc19.armv7hl requires libboost_serialization-mt.so.1.50.0
pdns-3.1-4.fc19.armv7hl requires libboost_program_options-mt.so.1.50.0
[perl-Bio-ASN1-EntrezGene]
perl-Bio-ASN1-EntrezGene-1.091-17.fc19.noarch requires perl(Bio::Index::AbstractSeq)
[perl-Bio-SamTools]
perl-Bio-SamTools-1.35-2.fc19.armv7hl requires perl(Bio::SeqFeature::Lite)
perl-Bio-SamTools-1.35-2.fc19.armv7hl requires perl(Bio::PrimarySeq)
[perl-Math-Clipper]
perl-Math-Clipper-1.17-3.fc19.armv7hl requires libpolyclipping.so.5
[perl-YAML-Parser-Syck]
perl-YAML-Parser-Syck-0.01-24.fc19.armv7hl requires libsyck.so.0
[php-horde-Horde-Vfs]
php-horde-Horde-Vfs-2.0.4-3.fc19.noarch requires php-pear(pear.horde.org/Horde_Auth) >= 0:2.0.0
[php-xcache]
php-xcache-3.0.1-2.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-xcache-3.0.1-2.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[python-blivet]
python-blivet-0.9-1.fc19.noarch requires hfsplus-tools
[rootplot]
rootplot-2.2.1-7.fc19.noarch requires root-python
[rubygem-aeolus-cli]
rubygem-aeolus-cli-0.5.0-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-aeolus-image]
rubygem-aeolus-image-0.5.0-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-apipie-rails]
rubygem-apipie-rails-0.0.13-3.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-boxgrinder-build]
rubygem-boxgrinder-build-0.10.4-1.fc19.noarch requires ruby-libguestfs
rubygem-boxgrinder-build-0.10.4-1.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-boxgrinder-core]
rubygem-boxgrinder-core-0.3.14-1.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-cucumber]
rubygem-cucumber-1.2.1-3.fc19.noarch requires rubygem(gherkin) >= 0:2.4.5
[rubygem-gem2rpm]
rubygem-gem2rpm-0.8.1-2.fc18.noarch requires ruby(abi) = 0:1.9.1
[rubygem-gettext_i18n_rails]
rubygem-gettext_i18n_rails-0.9.2-1.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-newgem]
rubygem-newgem-1.5.3-10.fc19.noarch requires rubygem(RedCloth)
[rubygem-pam]
rubygem-pam-1.5.4-14.fc19.armv7hl requires ruby(abi) >= 0:1.9
[rubygem-rack-mount]
rubygem-rack-mount-0.7.1-7.fc19.noarch requires ruby(abi) = 0:1.9.1
[rubygem-slim]
rubygem-slim-1.2.2-9.fc19.noarch requires rubygem(temple) < 0:0.5
rubygem-slim-1.2.2-9.fc19.noarch requires ruby(abi) = 0:1.9.1
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
[scirenderer]
scirenderer-1.0.7-1.fc19.noarch requires jogl2
[spacewalk-web]
spacewalk-dobby-1.9.22-2.fc19.noarch requires perl(Spacewalk::Setup)
[spatialite-tools]
spatialite-tools-3.1.0b-1.fc19.armv7hl requires libspatialite.so.3
[spring-installer]
ca-installer-20090316-13.fc19.armv7hl requires spring
spring-installer-20090316-13.fc19.armv7hl requires spring
[spring-maps-default]
spring-maps-default-0.1-10.fc19.noarch requires spring
[springlobby]
springlobby-0.147-4.fc19.armv7hl requires spring
[stp]
stp-0.1-12.20121002svn.fc19.armv7hl requires libcryptominisat-2.9.5.so
[synce-gnome]
synce-gnome-0.11-8.fc19.noarch requires odccm
[synce-kpm]
synce-kpm-0.15.1-5.fc19.noarch requires odccm
[syntastic]
syntastic-d-2.3.0-9.20120917git72856e6.fc19.noarch requires ldc
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[thermostat]
thermostat-0.6.0-12.fc19.armv7hl requires mongodb-server
thermostat-0.6.0-12.fc19.armv7hl requires mongodb
[tpp]
tpp-1.3.1-11.fc19.noarch requires ruby(abi) >= 0:1.8
[uwsgi]
uwsgi-plugin-php-1.2.6-8.fc19.armv7hl requires libphp5-5.4.so
uwsgi-plugin-rack-1.2.6-8.fc19.armv7hl requires libruby.so.1.9
uwsgi-plugin-ruby-1.2.6-8.fc19.armv7hl requires libruby.so.1.9
[vdsm]
vdsm-4.10.3-12.fc19.armv7hl requires qemu-kvm >= 2:0.15.0-4
vdsm-gluster-4.10.3-12.fc19.noarch requires glusterfs >= 0:3.4.0
vdsm-hook-fileinject-4.10.3-12.fc19.noarch requires python-libguestfs
[wallaby]
ruby-wallaby-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
wallaby-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
wallaby-http-server-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
wallaby-utils-0.16.0-2.fc19.noarch requires ruby(abi) = 0:1.9.1
[weka]
weka-3.6.8-2.fc19.noarch requires javasqlite
[wxMaxima]
wxMaxima-12.09.0-2.fc19.armv7hl requires maxima >= 0:5.20
[xmms2]
xmms2-ruby-0.8-8.fc19.armv7hl requires ruby(abi) = 0:1.9.1
xmms2-ruby-0.8-8.fc19.armv7hl requires libruby.so.1.9
[zarafa]
php-mapi-7.0.13-1.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
php-mapi-7.0.13-1.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
[zorba]
zorba-php-2.7.0-2.fc19.armv7hl requires php(zend-abi) = 0:20100525-armv7hl-32
zorba-php-2.7.0-2.fc19.armv7hl requires php(api) = 0:20100412-armv7hl-32
zorba-ruby-2.7.0-2.fc19.armv7hl requires ruby(abi) = 0:1.9.1
Summary:
Added Packages: 0
Removed Packages: 0
Upgraded Packages: 0
Size of added packages: 0 (0 )
Size change of modified packages: 0 (0 )
Size of removed packages: 0 (0 )
Size change: 0 (0 )
Compose finished at Thu Apr 18 12:44:19 UTC 2013
11 years