arm January 2013

arm@lists.fedoraproject.org

51 participants
172 discussions

Re: [fedora-arm] ELF reloc type defines
by Jon Masters 22 Jan '13

22 Jan '13

Great! Thanks. I wrote up some text on relocations for an aarch64 article...need to finish that and mention 32-bit too. -- Sent from my phone. Please excuse formatting and brevity. Petr Machata <pmachata(a)redhat.com> wrote: Jerry James <loganjerry(a)gmail.com> writes: > Upstream has one problem, though. On the other supported platforms > (Debian, various flavors of BSD), the reloc type defines > (R_ARM_MOVT_ABS, etc.) are available in some userspace header. I see > them in the Llinux kernel sources, in arch/arm/include/asm/elf.h, but > neither GCL upstream nor I can find them in any available userspace > header on Fedora 18. Does anybody know if they are available > somewhere? The relocation numbers are generally in elf.h distributed by glibc (elf/elf.h in the source). R_ARM_MOVT_ABS in particular is absent from that file though. I see it listed in [1], so I I'll post a patch adding these missing defines later today. Thanks, PM [1] ELF for the ARM® Architecture http://infocenter.arm.com/help/topic/com.arm.doc.ihi0044e/IHI0044E_aaelf.pdf _______________________________________________ arm mailing list arm(a)lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm

1 0

Re: [fedora-arm] F18 ARM Final plan from this morning's hackfest discussion
by Peter Robinson 22 Jan '13

22 Jan '13

On Mon, Jan 21, 2013 at 6:55 PM, Peter Robinson <pbrobinson(a)gmail.com> wrote: > On Mon, Jan 21, 2013 at 6:51 PM, Brendan Conoboy <blc(a)redhat.com> wrote: >> On 01/21/2013 03:38 PM, Peter Robinson wrote: >>> >>> On Sun, Jan 20, 2013 at 8:09 PM, Brendan Conoboy <blc(a)redhat.com> wrote: >>>> >>>> Slight correction: plan is to add a kernel sub package in 3.7 that >>>> includes dtbs. This won't go in the rc since the rc will be 3.6 based. >>> >>> >>> Why a kernel sub package? Why don't we add the dtb files for the >>> platforms that will work to the kernels that support it. We will >>> support half a dozen omap devices (and maybe include a few others that >>> might work) but there's no point shipping 100s of dtb files for >>> devices that we don't even enable the SoC for. >> >> >> I don't have a firm opinion on this except that we should make a sustainable >> decision. In my book all that really matters is that upgrading the kernel >> from 3.6 to 3.7 allows the systems we support to continue booting (and 3.7 >> to 3.8, etc). In my book that means the kernel provides the dtb (or >> requires a subpackage that contains the dtb). And the boot script knows to >> load the dtb if it's available. Wwe might as well do it the way we mean to >> keep on doing it, so picking good paths for these dtbs makes sense. There >> will presumably be quite a few of these files with kernel unification. > > I think then it should be as part of the kernel. We can make a better > decision and they are small so I don't see splitting it into another > file makes sense. The directory should be default like the firmwares > do but again we should be going with an upstream standard. Not sure why the list got removed but re-adding. Peter

4 5

ELF reloc type defines
by Jerry James 22 Jan '13

22 Jan '13

Greetings, I've been chasing a build problem with GCL on ARM for some time. Upstream has found what appears to be a solution, with the help of an ARM VM derived from the Fedora 18 Beta image. Thanks for that! Upstream has one problem, though. On the other supported platforms (Debian, various flavors of BSD), the reloc type defines (R_ARM_MOVT_ABS, etc.) are available in some userspace header. I see them in the Llinux kernel sources, in arch/arm/include/asm/elf.h, but neither GCL upstream nor I can find them in any available userspace header on Fedora 18. Does anybody know if they are available somewhere? Thanks, -- Jerry James http://www.jamezone.org/

3 2

arm F-18 Branched report: 20130122 changes
by Fedora compose checker 22 Jan '13

22 Jan '13

Compose started at Tue Jan 22 11:10:25 UTC 2013 Broken deps for arm ---------------------------------------------------------- [aeolus-conductor] aeolus-all-0.10.6-2.fc18.noarch requires mongodb-server aeolus-all-0.10.6-2.fc18.noarch requires iwhd aeolus-all-0.10.6-2.fc18.noarch requires imagefactory-jeosconf-ec2-rhel aeolus-all-0.10.6-2.fc18.noarch requires imagefactory-jeosconf-ec2-fedora aeolus-all-0.10.6-2.fc18.noarch requires imagefactory [asterisk] asterisk-fax-10.0.0-2.fc18.1.armv5tel requires libtiff.so.3 asterisk-snmp-10.0.0-2.fc18.1.armv5tel requires perl(:MODULE_COMPAT_5.14.2) asterisk-snmp-10.0.0-2.fc18.1.armv5tel requires librpmio.so.2 asterisk-snmp-10.0.0-2.fc18.1.armv5tel requires librpm.so.2 [bochs] bochs-2.6-1.fc18.armv5tel requires bochs-bios = 0:2.6-1.fc18 [bootconf] bootconf-1.4-6.fc18.noarch requires grub [cloud-init] cloud-init-0.7.1-2.fc18.noarch requires dmidecode [coccinella] coccinella-0.96.20-4.fc18.noarch requires iaxclient [condor-cloud] condor-cloud-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 condor-cloud-node-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-node-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 [condor-ec2-enhanced] condor-ec2-enhanced-1.3.1-1.fc18.noarch requires condor >= 0:7.4.4-0.9 [condor-ec2-enhanced-hooks] condor-ec2-enhanced-hooks-1.3.1-1.fc18.noarch requires condor >= 0:7.2.0-4 [condor-job-hooks] condor-job-hooks-1.5-6.fc18.noarch requires condor >= 0:7.0.2-4 [condor-low-latency] condor-low-latency-1.2-2.fc18.2.noarch requires condor >= 0:7.0.2-4 [condor-wallaby] condor-wallaby-client-5.0.3-1.fc18.noarch requires python-qmf >= 0:0.9.1073306 condor-wallaby-client-5.0.3-1.fc18.noarch requires condor >= 0:7.4.4-0.9 [cumin] cumin-0.1.5220-2.fc18.noarch requires python-qpid-qmf [ember-media] ember-media-0.6.2.1-3.fc18.noarch requires ember < 0:0.6.3 ember-media-0.6.2.1-3.fc18.noarch requires ember >= 0:0.6.2 [ghc-blaze-builder-conduit] ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv5tel requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [ghc-wai-extra] ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(zlib-conduit-0.4.0.1-3ea276ab63a21b643b6b16bbb7d15db0) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(wai-1.2.0.2-4ef119d16429dd118fdb8f8fe5d95a11) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(text-0.11.1.13-0fafa88b8c349f02f033f955ed8e5450) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(resourcet-0.3.2.1-487979a99c0b1634b1faab2417e55313) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(conduit-0.4.1.1-445f14eaa0bd15f8394f3c3cd8c22933) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(blaze-builder-conduit-0.4.0.1-2bf092c4e6f8a03a980a62cd1cf57a97) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-warp] ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(wai-0.4.3-c7e018d3a17422327676e6db7ee6214b) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(simple-sendfile-0.2.1-0e14a3eb9c52aac28e1260faf550afb2) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(enumerator-0.4.18-f4fc4be158c65b36dfdffe4bc7341da4) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(blaze-builder-enumerator-0.2.0.3-e19ec51d67a209312bc2e2ad87f6b9bd) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-zlib-conduit] ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv5tel requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [gnome-boxes] gnome-boxes-3.6.2-1.fc18.armv5tel requires libvirt-daemon-kvm [gofer] ruby-gofer-0.74-1.fc18.noarch requires rubygem(qpid) >= 0:0.16.0 [jaffl] jaffl-0.5.9-1.fc16.noarch requires jffi [jnr-ffi] jnr-ffi-0.5.10-3.fc17.noarch requires jffi [jnr-posix] jnr-posix-1.1.8-3.fc18.noarch requires jffi [jruby] jruby-1.6.3-3.fc17.noarch requires jffi >= 0:1.0.10 [liveusb-creator] liveusb-creator-3.11.7-2.fc18.noarch requires syslinux-extlinux liveusb-creator-3.11.7-2.fc18.noarch requires syslinux [mcollective-qpid-plugin] mcollective-qpid-plugin-0.1.1-3.fc18.noarch requires ruby-qpid-qmf [merkaartor] merkaartor-0.18.0-0.3.git654e49ba.fc17.armv5tel requires libexiv2.so.11 [nfsometer] nfsometer-1.1-2.fc18.noarch requires filebench [openlierox] openlierox-0.57-0.16.beta8.fc15.armv5tel requires libzip.so.1 [openpts] openpts-0.2.6-4.fc18.armv5tel requires tboot [openshift-origin-broker] openshift-origin-broker-0.6.17-3.fc18.noarch requires mongodb-server [openstack-nova] openstack-nova-compute-2012.2-1.fc18.noarch requires qemu-kvm openstack-nova-compute-2012.2-1.fc18.noarch requires libguestfs-mount >= 0:1.7.17 [ovirt-node] ovirt-node-2.5.1-1.fc18.noarch requires grub2 [oz] oz-0.9.0-1.fc18.noarch requires python-libguestfs [perl-MongoDB] perl-MongoDB-0.41-3.fc15.armv5tel requires perl(:MODULE_COMPAT_5.12.4) [pharosc] pharosc-xcircuit-8.3-6.fc18.noarch requires xcircuit [rakudo-star] rakudo-star-0.0.2011.07_3.6.0-5.fc18.1.armv5tel requires libparrot.so.3.6.0 [rootplot] rootplot-2.2.1-6.fc18.noarch requires root-python [ruby-spqr] ruby-spqr-0.3.6-3.fc18.noarch requires ruby-qmf [rubygem-RedCloth] rubygem-RedCloth-4.2.3-3.fc17.armv5tel requires ruby(abi) = 0:1.8 rubygem-RedCloth-4.2.3-3.fc17.armv5tel requires libruby.so.1.8 [rubygem-boxgrinder-build] rubygem-boxgrinder-build-0.10.4-1.fc18.noarch requires ruby-libguestfs [rubygem-childprocess] rubygem-childprocess-0.2.0-4.fc18.noarch requires rubygem(ffi) < 0:1.1 rubygem-childprocess-0.2.0-4.fc18.noarch requires rubygem(ffi) >= 0:1.0.6 [rubygem-openshift-origin-msg-broker-mcollective] rubygem-openshift-origin-msg-broker-mcollective-0.1.1-9.fc18.noarch requires qpid-cpp-server rubygem-openshift-origin-msg-broker-mcollective-0.1.1-9.fc18.noarch requires qpid-cpp-client [rubygem-rb-inotify] rubygem-rb-inotify-0.8.8-1.fc18.noarch requires rubygem(ffi) [rubygem-selenium-webdriver] rubygem-selenium-webdriver-2.3.2-4.fc18.noarch requires rubygem(ffi) >= 0:1.0.7 [spring-installer] ca-installer-20090316-12.fc18.armv5tel requires spring spring-installer-20090316-12.fc18.armv5tel requires spring [spring-maps-default] spring-maps-default-0.1-9.fc18.noarch requires spring [springlobby] springlobby-0.147-1.fc18.armv5tel requires spring [synce-gnome] synce-gnome-0.11-7.fc18.noarch requires odccm [synce-kpm] synce-kpm-0.15.1-3.fc18.noarch requires odccm [thermostat] thermostat-0.4.0-3.fc18.armv5tel requires mongodb-server thermostat-0.4.0-3.fc18.armv5tel requires mongodb [tomahawk] tomahawk-0.4.2-1.fc18.armv5tel requires libechonest.so.1.2 tomahawk-0.4.2-1.fc18.armv5tel requires libattica.so.0.3 [vdsm] vdsm-4.10.0-11.fc18.armv5tel requires qemu-kvm >= 2:0.15.0-4 vdsm-4.10.0-11.fc18.armv5tel requires dmidecode [vegastrike-data] vegastrike-data-0.5.1-2.r1.fc18.noarch requires vegastrike >= 0:0.5.1 [wallaby] python-wallaby-0.16.0-1.fc18.noarch requires python-qpid-qmf ruby-wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-http-server-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-utils-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 [weka] weka-3.6.8-1.fc18.noarch requires javasqlite [wxMaxima] wxMaxima-12.09.0-1.fc18.armv5tel requires maxima >= 0:5.20 Broken deps for armhfp ---------------------------------------------------------- [aeolus-conductor] aeolus-all-0.10.6-2.fc18.noarch requires mongodb-server aeolus-all-0.10.6-2.fc18.noarch requires iwhd aeolus-all-0.10.6-2.fc18.noarch requires imagefactory-jeosconf-ec2-rhel aeolus-all-0.10.6-2.fc18.noarch requires imagefactory-jeosconf-ec2-fedora aeolus-all-0.10.6-2.fc18.noarch requires imagefactory [asterisk] asterisk-fax-10.0.0-2.fc18.1.armv7hl requires libtiff.so.3 asterisk-snmp-10.0.0-2.fc18.1.armv7hl requires perl(:MODULE_COMPAT_5.14.2) asterisk-snmp-10.0.0-2.fc18.1.armv7hl requires librpmio.so.2 asterisk-snmp-10.0.0-2.fc18.1.armv7hl requires librpm.so.2 [bochs] bochs-2.6-1.fc18.armv7hl requires bochs-bios = 0:2.6-1.fc18 [bootconf] bootconf-1.4-6.fc18.noarch requires grub [cloud-init] cloud-init-0.7.1-2.fc18.noarch requires dmidecode [coccinella] coccinella-0.96.20-4.fc18.noarch requires iaxclient [condor-cloud] condor-cloud-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 condor-cloud-node-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-node-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 [condor-ec2-enhanced] condor-ec2-enhanced-1.3.1-1.fc18.noarch requires condor >= 0:7.4.4-0.9 [condor-ec2-enhanced-hooks] condor-ec2-enhanced-hooks-1.3.1-1.fc18.noarch requires condor >= 0:7.2.0-4 [condor-job-hooks] condor-job-hooks-1.5-6.fc18.noarch requires condor >= 0:7.0.2-4 [condor-low-latency] condor-low-latency-1.2-2.fc18.2.noarch requires condor >= 0:7.0.2-4 [condor-wallaby] condor-wallaby-client-5.0.3-1.fc18.noarch requires python-qmf >= 0:0.9.1073306 condor-wallaby-client-5.0.3-1.fc18.noarch requires condor >= 0:7.4.4-0.9 [cumin] cumin-0.1.5220-2.fc18.noarch requires python-qpid-qmf [ember-media] ember-media-0.6.2.1-3.fc18.noarch requires ember < 0:0.6.3 ember-media-0.6.2.1-3.fc18.noarch requires ember >= 0:0.6.2 [ghc-blaze-builder-conduit] ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv7hl requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [ghc-wai-extra] ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(zlib-conduit-0.4.0.1-3ea276ab63a21b643b6b16bbb7d15db0) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(wai-1.2.0.2-4ef119d16429dd118fdb8f8fe5d95a11) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(text-0.11.1.13-0fafa88b8c349f02f033f955ed8e5450) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(resourcet-0.3.2.1-487979a99c0b1634b1faab2417e55313) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(conduit-0.4.1.1-445f14eaa0bd15f8394f3c3cd8c22933) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(blaze-builder-conduit-0.4.0.1-2bf092c4e6f8a03a980a62cd1cf57a97) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-warp] ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(wai-0.4.3-c7e018d3a17422327676e6db7ee6214b) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(simple-sendfile-0.2.1-0e14a3eb9c52aac28e1260faf550afb2) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(enumerator-0.4.18-f4fc4be158c65b36dfdffe4bc7341da4) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(blaze-builder-enumerator-0.2.0.3-e19ec51d67a209312bc2e2ad87f6b9bd) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-zlib-conduit] ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv7hl requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [gnome-boxes] gnome-boxes-3.6.2-1.fc18.armv7hl requires libvirt-daemon-kvm [gofer] ruby-gofer-0.74-1.fc18.noarch requires rubygem(qpid) >= 0:0.16.0 [jaffl] jaffl-0.5.9-1.fc16.noarch requires jffi [jnr-ffi] jnr-ffi-0.5.10-3.fc17.noarch requires jffi [jnr-posix] jnr-posix-1.1.8-3.fc18.noarch requires jffi [jruby] jruby-1.6.3-3.fc17.noarch requires jffi >= 0:1.0.10 [liveusb-creator] liveusb-creator-3.11.7-2.fc18.noarch requires syslinux-extlinux liveusb-creator-3.11.7-2.fc18.noarch requires syslinux [mcollective-qpid-plugin] mcollective-qpid-plugin-0.1.1-3.fc18.noarch requires ruby-qpid-qmf [merkaartor] merkaartor-0.18.0-0.3.git654e49ba.fc17.armv7hl requires libexiv2.so.11 [nfsometer] nfsometer-1.1-2.fc18.noarch requires filebench [openlierox] openlierox-0.57-0.16.beta8.fc15.armv7hl requires libzip.so.1 [openpts] openpts-0.2.6-4.fc18.armv7hl requires tboot [openshift-origin-broker] openshift-origin-broker-0.6.17-3.fc18.noarch requires mongodb-server [openstack-nova] openstack-nova-compute-2012.2-1.fc18.noarch requires qemu-kvm openstack-nova-compute-2012.2-1.fc18.noarch requires libguestfs-mount >= 0:1.7.17 [ovirt-node] ovirt-node-2.5.1-1.fc18.noarch requires grub2 [oz] oz-0.9.0-1.fc18.noarch requires python-libguestfs [perl-MongoDB] perl-MongoDB-0.41-3.fc15.armv7hl requires perl(:MODULE_COMPAT_5.12.4) [pharosc] pharosc-xcircuit-8.3-6.fc18.noarch requires xcircuit [rakudo-star] rakudo-star-0.0.2011.07_3.6.0-5.fc18.1.armv7hl requires libparrot.so.3.6.0 [rootplot] rootplot-2.2.1-6.fc18.noarch requires root-python [ruby-spqr] ruby-spqr-0.3.6-3.fc18.noarch requires ruby-qmf [rubygem-RedCloth] rubygem-RedCloth-4.2.3-3.fc17.armv7hl requires ruby(abi) = 0:1.8 rubygem-RedCloth-4.2.3-3.fc17.armv7hl requires libruby.so.1.8 [rubygem-boxgrinder-build] rubygem-boxgrinder-build-0.10.4-1.fc18.noarch requires ruby-libguestfs [rubygem-childprocess] rubygem-childprocess-0.2.0-4.fc18.noarch requires rubygem(ffi) < 0:1.1 rubygem-childprocess-0.2.0-4.fc18.noarch requires rubygem(ffi) >= 0:1.0.6 [rubygem-openshift-origin-msg-broker-mcollective] rubygem-openshift-origin-msg-broker-mcollective-0.1.1-9.fc18.noarch requires qpid-cpp-server rubygem-openshift-origin-msg-broker-mcollective-0.1.1-9.fc18.noarch requires qpid-cpp-client [rubygem-rb-inotify] rubygem-rb-inotify-0.8.8-1.fc18.noarch requires rubygem(ffi) [rubygem-selenium-webdriver] rubygem-selenium-webdriver-2.3.2-4.fc18.noarch requires rubygem(ffi) >= 0:1.0.7 [spring-installer] ca-installer-20090316-12.fc18.armv7hl requires spring spring-installer-20090316-12.fc18.armv7hl requires spring [spring-maps-default] spring-maps-default-0.1-9.fc18.noarch requires spring [springlobby] springlobby-0.147-1.fc18.armv7hl requires spring [synce-gnome] synce-gnome-0.11-7.fc18.noarch requires odccm [synce-kpm] synce-kpm-0.15.1-3.fc18.noarch requires odccm [thermostat] thermostat-0.4.0-3.fc18.armv7hl requires mongodb-server thermostat-0.4.0-3.fc18.armv7hl requires mongodb [tomahawk] tomahawk-0.4.2-1.fc18.armv7hl requires libechonest.so.1.2 tomahawk-0.4.2-1.fc18.armv7hl requires libattica.so.0.3 [vdsm] vdsm-4.10.0-11.fc18.armv7hl requires qemu-kvm >= 2:0.15.0-4 vdsm-4.10.0-11.fc18.armv7hl requires dmidecode [vegastrike-data] vegastrike-data-0.5.1-2.r1.fc18.noarch requires vegastrike >= 0:0.5.1 [wallaby] python-wallaby-0.16.0-1.fc18.noarch requires python-qpid-qmf ruby-wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-http-server-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-utils-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 [weka] weka-3.6.8-1.fc18.noarch requires javasqlite [wxMaxima] wxMaxima-12.09.0-1.fc18.armv7hl requires maxima >= 0:5.20 Summary: Added Packages: 0 Removed Packages: 0 Upgraded Packages: 0 Compose finished at Tue Jan 22 12:25:16 UTC 2013

1 0

arm rawhide report: 20130122 changes
by Fedora compose checker 22 Jan '13

22 Jan '13

Compose started at Tue Jan 22 08:10:41 UTC 2013 Broken deps for arm ---------------------------------------------------------- [ClanLib] ClanLib-2.3.6-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ClanLib-2.3.6-3.fc18.armv5tel requires libjpeg.so.62 [ClanLib06] ClanLib06-0.6.5-23.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ClanLib06-0.6.5-23.fc18.armv5tel requires libjpeg.so.62 [GREYCstoration] GREYCstoration-2.8-11.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) GREYCstoration-2.8-11.fc18.armv5tel requires libjpeg.so.62 [Io-language] Io-language-graphics-and-sound-20110912-6.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) Io-language-graphics-and-sound-20110912-6.fc19.armv5tel requires libjpeg.so.62 [LabPlot] LabPlot-1.6.0.3-1.fc18.armv5tel requires libaudiofile.so.0 [PyQt] PyQt-3.18.1-14.fc18.armv5tel requires libjpeg.so.62 [WindowMaker] WINGs-libs-0.95.3-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) WINGs-libs-0.95.3-3.fc18.armv5tel requires libjpeg.so.62 [aeolus-conductor] aeolus-all-0.10.6-2.fc18.noarch requires mongodb-server aeolus-all-0.10.6-2.fc18.noarch requires iwhd [amarok] amarok-2.6.90-2.fc19.armv5tel requires kde-runtime >= 0:4.9.95 [amsn] amsn-0.98.9-4.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) amsn-0.98.9-4.fc18.armv5tel requires libjpeg.so.62 [apper] apper-0.8.0-0.11.20121126git.fc18.armv5tel requires kde-runtime >= 0:4.9.4 [asterisk] asterisk-fax-10.0.0-2.fc18.1.armv5tel requires libtiff.so.3 asterisk-snmp-10.0.0-2.fc18.1.armv5tel requires perl(:MODULE_COMPAT_5.14.2) asterisk-snmp-10.0.0-2.fc18.1.armv5tel requires librpmio.so.2 asterisk-snmp-10.0.0-2.fc18.1.armv5tel requires librpm.so.2 [audiocd-kio] audiocd-kio-4.9.90-1.fc19.armv5tel requires kde-runtime >= 0:4.9.95 audiocd-kio-libs-4.9.90-1.fc19.armv5tel requires libkcompactdisc(armv5tel-32) >= 0:4.9.95 audiocd-kio-libs-4.9.90-1.fc19.armv5tel requires libkcddb(armv5tel-32) >= 0:4.9.95 [avogadro] avogadro-1.0.3-12.fc19.armv5tel requires libGLEW.so.1.7 avogadro-libs-1.0.3-12.fc19.armv5tel requires libGLEW.so.1.7 [blender] 1:blender-2.63a-10.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 1:blender-2.63a-10.fc19.armv5tel requires libjpeg.so.62 1:blender-2.63a-10.fc19.armv5tel requires libGLEW.so.1.7 1:blenderplayer-2.63a-10.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 1:blenderplayer-2.63a-10.fc19.armv5tel requires libjpeg.so.62 1:blenderplayer-2.63a-10.fc19.armv5tel requires libGLEW.so.1.7 [bochs] bochs-2.6-1.fc19.armv5tel requires bochs-bios = 0:2.6-1.fc19 [bootconf] bootconf-1.4-6.fc18.noarch requires grub [calligra] calligra-core-2.5.4-1.fc18.armv5tel requires kdebase-runtime >= 0:4.9.4 calligra-karbon-2.5.4-1.fc18.armv5tel requires libjpeg.so.62 calligra-kexi-map-form-widget-2.5.4-1.fc18.armv5tel requires marble >= 1:4.9.4 calligra-krita-2.5.4-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) calligra-krita-2.5.4-1.fc18.armv5tel requires libjpeg.so.62 calligra-krita-2.5.4-1.fc18.armv5tel requires libGLEW.so.1.7 calligra-krita-libs-2.5.4-1.fc18.armv5tel requires libGLEW.so.1.7 calligra-okular-odpgenerator-2.5.4-1.fc18.armv5tel requires okular >= 0:4.9.4 calligra-reports-map-element-2.5.4-1.fc18.armv5tel requires marble >= 1:4.9.4 [calligra-l10n] calligra-l10n-2.5.93-1.fc19.noarch requires calligra-core >= 0:2.5.93 [celestia] celestia-1.6.1-6.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) celestia-1.6.1-6.fc18.armv5tel requires libjpeg.so.62 [cheese] 2:cheese-3.6.2-1.fc18.armv5tel requires libgnome-desktop-3.so.4 2:cheese-libs-3.6.2-1.fc18.armv5tel requires libgnome-desktop-3.so.4 [cinepaint] cinepaint-libs-1.3-4.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) cinepaint-libs-1.3-4.fc18.armv5tel requires libjpeg.so.62 [cinnamon] cinnamon-1.6.7-2.fc18.armv5tel requires libgnome-desktop-3.so.4 [clean-extra-utils] clean-extra-utils-0.1-1.fc19.armv5tel requires clean [cloud-init] cloud-init-0.7.0-1.fc18.noarch requires dmidecode [coccinella] coccinella-0.96.20-4.fc18.noarch requires iaxclient [condor-cloud] condor-cloud-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 condor-cloud-node-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-node-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 [condor-ec2-enhanced] condor-ec2-enhanced-1.3.1-1.fc19.noarch requires condor >= 0:7.4.4-0.9 [condor-ec2-enhanced-hooks] condor-ec2-enhanced-hooks-1.3.1-1.fc19.noarch requires condor >= 0:7.2.0-4 [condor-job-hooks] condor-job-hooks-1.5-6.fc18.noarch requires condor >= 0:7.0.2-4 [condor-low-latency] condor-low-latency-1.2-2.fc18.2.noarch requires condor >= 0:7.0.2-4 [condor-wallaby] condor-wallaby-client-5.0.3-1.fc19.noarch requires python-qmf >= 0:0.9.1073306 condor-wallaby-client-5.0.3-1.fc19.noarch requires condor >= 0:7.4.4-0.9 [contour] contour-0.3-1.fc18.armv5tel requires kde-runtime >= 0:4.9.3 [control-center] 1:control-center-3.6.3-1.fc18.armv5tel requires libgnome-desktop-3.so.4 [coq] coq-8.4-1.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkTree) = 0:fbfcb4129253ccc61b07e95fc884b43b coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkThread) = 0:ef5b249d4af0f4f90eb991407ae53d3a coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkText) = 0:bbba6ca7afaed7b789d2b545308039b7 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkSignal) = 0:40cae66e85ec9d92363e99ab49ea8ce6 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkPackProps) = 0:2815066310c90240e2f295efb031e008 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkPack) = 0:f01c49a93091edd644dd3c81e82b670e coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkMain) = 0:136dceeebea50518bb23d5608f265036 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkEnums) = 0:0c703e1dac4d056ea0bc450e99f597e5 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkData) = 0:130caaaa62a9faecfe8f624df72a9434 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkButton) = 0:a8d70be67c92d33c403b6f04a06b9869 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkBaseProps) = 0:8ef17db6754fc20a7303c451a798c319 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GtkBase) = 0:95ebb1139c4ecb64afe71c2e024fa8b6 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(Gobject) = 0:65f4b079004bddd8960117f8b7ba3b43 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(Glib) = 0:0557158580d573c73e54a0e092bcdb6e coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GdkKeysyms) = 0:9b8ec1329362407f66e4cde66071bea7 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GdkEvent) = 0:a07cb442ac61635e8b9501a010e5737c coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GdkEnums) = 0:6456774ccb10c2892915bca4512c4f6d coq-coqide-8.4-1.fc19.armv5tel requires ocaml(Gdk) = 0:2249830890d06ca283a90c548caec46f coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GWindow) = 0:200762a6c68891da87d2caadc0ed4502 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GTree) = 0:ee57a7e3dd7ed82c73559ae42a488760 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GToolbox) = 0:3f8567efad59e19075dfdef5075d9b26 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GText) = 0:09abcc26d15d77bd9ab5923f4a0d9ce0 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GRange) = 0:0bdc0491017d2255021a68128392bc5c coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GPack) = 0:b98c2508aa5d5c1f2b5e55750d9efdae coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GObj) = 0:54fb0d9be12943809e58ce2a201e8a5f coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GMisc) = 0:50cafd209d922ed2beae7329392d77d3 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GMenu) = 0:d7b7921230cecd4cb87a245367dee540 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GList) = 0:11b5f38428ffd21158b5407824101b9e coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GFile) = 0:5d6b251fb77c75c352d3095ba9fd7b97 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GEdit) = 0:e5ef8b0bb8e268c6550045985b2b1522 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GDraw) = 0:65c96e832a892d832d36d29aa186fc37 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GContainer) = 0:1cf49582a74c278b07a2283f28487d89 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GButton) = 0:bd9944f5965dbdb176266014b1c6eb58 coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GBroken) = 0:80b4f54e859d301713a31114b904e60d coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GBin) = 0:762daa4bcabc3cdff60a9960a151659e coq-coqide-8.4-1.fc19.armv5tel requires ocaml(GAction) = 0:ce4cf98afb8cf4eb4c4481feb408b1ba [cumin] cumin-0.1.5522-4.fc19.noarch requires python-qpid-qmf [cyphesis] cyphesis-0.5.26-7.fc18.armv5tel requires libwfmath-0.3.so.6 cyphesis-0.5.26-7.fc18.armv5tel requires libvarconf-1.0.so.7 cyphesis-0.5.26-7.fc18.armv5tel requires libskstream-0.3.so.6 cyphesis-0.5.26-7.fc18.armv5tel requires libmercator-0.3.so.1 [dbmail] dbmail-3.0.2-4.fc18.armv5tel requires vixie-cron [digikam] digikam-2.9.0-3.fc18.armv5tel requires libkipi.so.9 digikam-2.9.0-3.fc18.armv5tel requires kdebase-runtime >= 0:4.9.4 digikam-libs-2.9.0-3.fc18.armv5tel requires libkipi.so.9 digikam-libs-2.9.0-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) digikam-libs-2.9.0-3.fc18.armv5tel requires libjpeg.so.62 kipi-plugins-2.9.0-3.fc18.armv5tel requires libkipi.so.9 kipi-plugins-2.9.0-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) kipi-plugins-2.9.0-3.fc18.armv5tel requires libjpeg.so.62 kipi-plugins-libs-2.9.0-3.fc18.armv5tel requires libkipi.so.9 kipi-plugins-libs-2.9.0-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) kipi-plugins-libs-2.9.0-3.fc18.armv5tel requires libjpeg.so.62 libkgeomap-2.9.0-3.fc18.armv5tel requires marble >= 1:4.9.4 [dmapd] dmapd-0.0.48-2.fc18.armv5tel requires libjpeg.so.62 [dmlite-plugins-memcache] dmlite-plugins-memcache-0.4.0-1.fc18.armv5tel requires libmemcached.so.10 [dnf] dnf-0.2.20-1.gitdec970f.fc19.noarch requires python-hawkey = 0:0.3.6 [dogtag-pki] dogtag-pki-10.0.1-1.fc19.noarch requires pki-tools >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-symkey >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-server >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-javadoc >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-ca >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-base >= 0:10.0.1 [dwatch] dwatch-0.1.1-10.fc18.armv5tel requires vixie-cron [e16] e16-1.0.11-1.fc18.armv5tel requires libaudiofile.so.0 [ebview] ebview-0.3.6.2-7.fc18.armv5tel requires VLGothic-fonts [eclipse-linuxtools] eclipse-perf-1.2.0-1.fc19.noarch requires perf [ekiga] ekiga-3.9.90-1.fc19.armv5tel requires libpt.so.2.10.7 ekiga-3.9.90-1.fc19.armv5tel requires libopal.so.3.10.7 [ember-media] ember-media-0.7.0-1.fc19.noarch requires ember < 0:0.7.1 ember-media-0.7.0-1.fc19.noarch requires ember >= 0:0.7.0 [eog] eog-3.6.2-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) eog-3.6.2-1.fc18.armv5tel requires libjpeg.so.62 eog-3.6.2-1.fc18.armv5tel requires libgnome-desktop-3.so.4 [epiphany] 1:epiphany-3.6.1-2.fc18.armv5tel requires libgnome-desktop-3.so.4 [espresso] espresso-mpich2-3.0.2-4.fc18.armv5tel requires libmpich.so.3 [evince] evince-dvi-3.5.5-1.fc19.armv5tel requires libkpathsea.so.4 [evolution] evolution-3.6.2-3.fc18.armv5tel requires libgweather-3.so.1 evolution-3.6.2-3.fc18.armv5tel requires libgnome-desktop-3.so.4 evolution-bogofilter-3.6.2-3.fc18.armv5tel requires libgnome-desktop-3.so.4 evolution-devel-3.6.2-3.fc18.armv5tel requires evolution-data-server-devel >= 0:3.6.2 evolution-pst-3.6.2-3.fc18.armv5tel requires libgnome-desktop-3.so.4 evolution-spamassassin-3.6.2-3.fc18.armv5tel requires libgnome-desktop-3.so.4 [evolution-data-server] evolution-data-server-3.5.92-1.fc19.armv5tel requires libgweather-3.so.1 [evolution-ews] evolution-ews-3.6.1-1.fc18.armv5tel requires evolution-data-server >= 0:3.6.1 [evolution-mapi] evolution-mapi-3.6.2-1.fc18.armv5tel requires evolution-data-server >= 0:3.6.2 evolution-mapi-devel-3.6.2-1.fc18.armv5tel requires evolution-data-server-devel >= 0:3.6.2 [frama-c] frama-c-1.7-9.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 frama-c-1.7-9.fc19.armv5tel requires ocaml(SourceView2Enums) = 0:a4719464b5ba0296d71295f6b8478e70 frama-c-1.7-9.fc19.armv5tel requires ocaml(OgtkSourceView2Props) = 0:0f46098897daa6065ad3b1af5e474848 frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkTree) = 0:fbfcb4129253ccc61b07e95fc884b43b frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkSourceView2Props) = 0:cb78ac1a9caf077866c26a562b34fb5a frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkSignal) = 0:40cae66e85ec9d92363e99ab49ea8ce6 frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkPackProps) = 0:2815066310c90240e2f295efb031e008 frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkPack) = 0:f01c49a93091edd644dd3c81e82b670e frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkEnums) = 0:0c703e1dac4d056ea0bc450e99f597e5 frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkBaseProps) = 0:8ef17db6754fc20a7303c451a798c319 frama-c-1.7-9.fc19.armv5tel requires ocaml(GtkBase) = 0:95ebb1139c4ecb64afe71c2e024fa8b6 frama-c-1.7-9.fc19.armv5tel requires ocaml(Gobject) = 0:65f4b079004bddd8960117f8b7ba3b43 frama-c-1.7-9.fc19.armv5tel requires ocaml(Glib) = 0:0557158580d573c73e54a0e092bcdb6e frama-c-1.7-9.fc19.armv5tel requires ocaml(GdkEvent) = 0:a07cb442ac61635e8b9501a010e5737c frama-c-1.7-9.fc19.armv5tel requires ocaml(GdkEnums) = 0:6456774ccb10c2892915bca4512c4f6d frama-c-1.7-9.fc19.armv5tel requires ocaml(Gdk) = 0:2249830890d06ca283a90c548caec46f frama-c-1.7-9.fc19.armv5tel requires ocaml(GWindow) = 0:200762a6c68891da87d2caadc0ed4502 frama-c-1.7-9.fc19.armv5tel requires ocaml(GTree) = 0:ee57a7e3dd7ed82c73559ae42a488760 frama-c-1.7-9.fc19.armv5tel requires ocaml(GToolbox) = 0:3f8567efad59e19075dfdef5075d9b26 frama-c-1.7-9.fc19.armv5tel requires ocaml(GText) = 0:09abcc26d15d77bd9ab5923f4a0d9ce0 frama-c-1.7-9.fc19.armv5tel requires ocaml(GSourceView2) = 0:4c5b39cea6d2b5bcbe088c71de5ac0c7 frama-c-1.7-9.fc19.armv5tel requires ocaml(GRange) = 0:0bdc0491017d2255021a68128392bc5c frama-c-1.7-9.fc19.armv5tel requires ocaml(GPack) = 0:b98c2508aa5d5c1f2b5e55750d9efdae frama-c-1.7-9.fc19.armv5tel requires ocaml(GObj) = 0:54fb0d9be12943809e58ce2a201e8a5f frama-c-1.7-9.fc19.armv5tel requires ocaml(GMisc) = 0:50cafd209d922ed2beae7329392d77d3 frama-c-1.7-9.fc19.armv5tel requires ocaml(GMenu) = 0:d7b7921230cecd4cb87a245367dee540 frama-c-1.7-9.fc19.armv5tel requires ocaml(GList) = 0:11b5f38428ffd21158b5407824101b9e frama-c-1.7-9.fc19.armv5tel requires ocaml(GFile) = 0:5d6b251fb77c75c352d3095ba9fd7b97 frama-c-1.7-9.fc19.armv5tel requires ocaml(GEdit) = 0:e5ef8b0bb8e268c6550045985b2b1522 frama-c-1.7-9.fc19.armv5tel requires ocaml(GDraw) = 0:65c96e832a892d832d36d29aa186fc37 frama-c-1.7-9.fc19.armv5tel requires ocaml(GContainer) = 0:1cf49582a74c278b07a2283f28487d89 frama-c-1.7-9.fc19.armv5tel requires ocaml(GButton) = 0:bd9944f5965dbdb176266014b1c6eb58 frama-c-1.7-9.fc19.armv5tel requires ocaml(GBroken) = 0:80b4f54e859d301713a31114b904e60d frama-c-1.7-9.fc19.armv5tel requires ocaml(GBin) = 0:762daa4bcabc3cdff60a9960a151659e frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(SourceView2Enums) = 0:a4719464b5ba0296d71295f6b8478e70 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(OgtkSourceView2Props) = 0:0f46098897daa6065ad3b1af5e474848 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkText) = 0:bbba6ca7afaed7b789d2b545308039b7 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkSourceView2Props) = 0:cb78ac1a9caf077866c26a562b34fb5a frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkSignal) = 0:40cae66e85ec9d92363e99ab49ea8ce6 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkPackProps) = 0:2815066310c90240e2f295efb031e008 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkPack) = 0:f01c49a93091edd644dd3c81e82b670e frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkMain) = 0:136dceeebea50518bb23d5608f265036 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkEnums) = 0:0c703e1dac4d056ea0bc450e99f597e5 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkBaseProps) = 0:8ef17db6754fc20a7303c451a798c319 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GtkBase) = 0:95ebb1139c4ecb64afe71c2e024fa8b6 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(Gobject) = 0:65f4b079004bddd8960117f8b7ba3b43 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(Glib) = 0:0557158580d573c73e54a0e092bcdb6e frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GdkEvent) = 0:a07cb442ac61635e8b9501a010e5737c frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GdkEnums) = 0:6456774ccb10c2892915bca4512c4f6d frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(Gdk) = 0:2249830890d06ca283a90c548caec46f frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GWindow) = 0:200762a6c68891da87d2caadc0ed4502 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GTree) = 0:ee57a7e3dd7ed82c73559ae42a488760 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GToolbox) = 0:3f8567efad59e19075dfdef5075d9b26 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GText) = 0:09abcc26d15d77bd9ab5923f4a0d9ce0 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GSourceView2) = 0:4c5b39cea6d2b5bcbe088c71de5ac0c7 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GRange) = 0:0bdc0491017d2255021a68128392bc5c frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GPack) = 0:b98c2508aa5d5c1f2b5e55750d9efdae frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GObj) = 0:54fb0d9be12943809e58ce2a201e8a5f frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GMisc) = 0:50cafd209d922ed2beae7329392d77d3 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GMenu) = 0:d7b7921230cecd4cb87a245367dee540 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GList) = 0:11b5f38428ffd21158b5407824101b9e frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GFile) = 0:5d6b251fb77c75c352d3095ba9fd7b97 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GEdit) = 0:e5ef8b0bb8e268c6550045985b2b1522 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GDraw) = 0:65c96e832a892d832d36d29aa186fc37 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GContainer) = 0:1cf49582a74c278b07a2283f28487d89 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GButton) = 0:bd9944f5965dbdb176266014b1c6eb58 frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GBroken) = 0:80b4f54e859d301713a31114b904e60d frama-c-devel-1.7-9.fc19.armv5tel requires ocaml(GBin) = 0:762daa4bcabc3cdff60a9960a151659e [freeipa] freeipa-server-3.1.0-2.fc18.armv5tel requires krb5-server < 0:1.11 freeipa-server-strict-3.1.0-2.fc18.armv5tel requires krb5-server = 0:1.10.3 [freewrl] freewrl-1.22.13.1-3.fc18.armv5tel requires libjpeg.so.62 freewrl-1.22.13.1-3.fc18.armv5tel requires libGLEW.so.1.7 libEAI-1.22.13.1-3.fc18.armv5tel requires libjpeg.so.62 libEAI-1.22.13.1-3.fc18.armv5tel requires libGLEW.so.1.7 [gambas2] gambas2-gb-v4l-2.24.0-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gambas2-gb-v4l-2.24.0-3.fc18.armv5tel requires libjpeg.so.62 [gambas3] gambas3-gb-opengl-3.3.2-1.fc19.armv5tel requires libGLEW.so.1.7 gambas3-gb-opengl-glsl-3.3.2-1.fc19.armv5tel requires libGLEW.so.1.7 gambas3-gb-sdl-3.3.2-1.fc19.armv5tel requires libGLEW.so.1.7 gambas3-gb-v4l-3.3.2-1.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gambas3-gb-v4l-3.3.2-1.fc19.armv5tel requires libjpeg.so.62 [gappalib-coq] gappalib-coq-0.18.0-4.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 [gdal] gdal-1.9.1-14.fc18.armv5tel requires libwebp.so.2 gdal-1.9.1-14.fc18.armv5tel requires libjpeg.so.62 gdal-java-1.9.1-14.fc18.armv5tel requires libwebp.so.2 gdal-java-1.9.1-14.fc18.armv5tel requires libjpeg.so.62 gdal-libs-1.9.1-14.fc18.armv5tel requires libwebp.so.2 gdal-libs-1.9.1-14.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gdal-libs-1.9.1-14.fc18.armv5tel requires libjpeg.so.62 gdal-perl-1.9.1-14.fc18.armv5tel requires libwebp.so.2 gdal-perl-1.9.1-14.fc18.armv5tel requires libjpeg.so.62 gdal-ruby-1.9.1-14.fc18.armv5tel requires libwebp.so.2 gdal-ruby-1.9.1-14.fc18.armv5tel requires libjpeg.so.62 [gdb-heap] gdb-heap-0.5-10.fc18.armv5tel requires glibc(armv5tel-32) = 0:2.16 [geeqie] geeqie-1.1-1.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) geeqie-1.1-1.fc19.armv5tel requires libjpeg.so.62 [gegl] gegl-0.2.0-2.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gegl-0.2.0-2.fc18.armv5tel requires libjpeg.so.62 [ghc-blaze-builder-conduit] ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv5tel requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [ghc-wai-extra] ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(zlib-conduit-0.4.0.1-3ea276ab63a21b643b6b16bbb7d15db0) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(wai-1.2.0.2-4ef119d16429dd118fdb8f8fe5d95a11) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(text-0.11.1.13-0fafa88b8c349f02f033f955ed8e5450) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(resourcet-0.3.2.1-487979a99c0b1634b1faab2417e55313) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(conduit-0.4.1.1-445f14eaa0bd15f8394f3c3cd8c22933) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(blaze-builder-conduit-0.4.0.1-2bf092c4e6f8a03a980a62cd1cf57a97) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv5tel requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-warp] ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(wai-0.4.3-c7e018d3a17422327676e6db7ee6214b) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(simple-sendfile-0.2.1-0e14a3eb9c52aac28e1260faf550afb2) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(enumerator-0.4.18-f4fc4be158c65b36dfdffe4bc7341da4) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(blaze-builder-enumerator-0.2.0.3-e19ec51d67a209312bc2e2ad87f6b9bd) ghc-warp-devel-0.4.6.3-3.fc18.armv5tel requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-zlib-conduit] ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv5tel requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv5tel requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [gimp] 2:gimp-2.8.2-1.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 2:gimp-2.8.2-1.fc19.armv5tel requires libjpeg.so.62 [gnash] 1:gnash-0.8.10-4.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 1:gnash-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 1:gnash-cygnal-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 1:gnash-extension-dejagnu-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 1:gnash-extension-fileio-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 1:gnash-extension-lirc-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 1:gnash-extension-mysql-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 1:python-gnash-0.8.10-4.fc18.armv5tel requires libjpeg.so.62 [gnofract4d] gnofract4d-3.14-2.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gnofract4d-3.14-2.fc18.armv5tel requires libjpeg.so.62 [gnome-applets] 1:gnome-applets-3.5.92-3.fc18.armv5tel requires libgweather-3.so.1 [gnome-boxes] gnome-boxes-3.5.5-1.fc19.armv5tel requires libvirt-daemon-kvm gnome-boxes-3.5.5-1.fc19.armv5tel requires libcogl.so.9 [gnome-color-manager] gnome-color-manager-3.6.0-2.fc19.armv5tel requires libgnome-desktop-3.so.4 [gnome-contacts] gnome-contacts-3.6.2-1.fc18.armv5tel requires libgnome-desktop-3.so.4 [gnome-documents] gnome-documents-3.6.2-1.fc18.armv5tel requires libgnome-desktop-3.so.4 [gnome-font-viewer] gnome-font-viewer-3.6.2-1.fc18.armv5tel requires libgnome-desktop-3.so.4 [gnome-panel] gnome-panel-3.6.2-2.fc18.armv5tel requires libgweather-3.so.1 gnome-panel-3.6.2-2.fc18.armv5tel requires libgnome-desktop-3.so.4 gnome-panel-devel-3.6.2-2.fc18.armv5tel requires libgnome-desktop-3.so.4 [gnome-settings-daemon] gnome-settings-daemon-3.6.3-2.fc18.armv5tel requires libgnome-desktop-3.so.4 gnome-settings-daemon-devel-3.6.3-2.fc18.armv5tel requires libgnome-desktop-3.so.4 [gnome-shell] gnome-shell-3.6.2-6.fc18.armv5tel requires libgnome-desktop-3.so.4 [gnome-shell-extensions] gnome-shell-extension-common-3.7.4-1.fc19.noarch requires gnome-shell >= 0:3.7.4 [gnuplot] gnuplot-4.6.1-4.fc18.armv5tel requires libjpeg.so.62 gnuplot-minimal-4.6.1-4.fc18.armv5tel requires libjpeg.so.62 [gnustep-gui] gnustep-gui-0.22.0-3.fc18.armv5tel requires libjpeg.so.62 gnustep-gui-libs-0.22.0-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gnustep-gui-libs-0.22.0-3.fc18.armv5tel requires libjpeg.so.62 [gofer] ruby-gofer-0.75-1.fc19.noarch requires rubygem(qpid) >= 0:0.16.0 [gr-air-modes] gr-air-modes-0-0.7.20120905git6c7a7370.fc18.armv5tel requires libgruel-3.6.3rc0.so.0.0.0 gr-air-modes-0-0.7.20120905git6c7a7370.fc18.armv5tel requires libgnuradio-core-3.6.3rc0.so.0.0.0 [grads] grads-2.0.1-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) grads-2.0.1-3.fc18.armv5tel requires libjpeg.so.62 [grass] grass-6.4.2-4.fc18.armv5tel requires libgeos-3.3.2.so grass-libs-6.4.2-4.fc18.armv5tel requires libgeos-3.3.2.so [grilo-plugins] grilo-plugins-0.2.5-1.fc18.armv5tel requires grilo >= 0:0.2.4 [gstreamer-plugins-good] gstreamer-plugins-good-0.10.31-5.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gstreamer-plugins-good-0.10.31-5.fc18.armv5tel requires libjpeg.so.62 [gstreamer1-plugins-good] gstreamer1-plugins-good-1.0.4-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gstreamer1-plugins-good-1.0.4-1.fc18.armv5tel requires libjpeg.so.62 [gthumb] gthumb-3.0.2-3.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gthumb-3.0.2-3.fc19.armv5tel requires libjpeg.so.62 [gwenview] gwenview-4.9.5-1.fc18.armv5tel requires libkipi.so.9 gwenview-4.9.5-1.fc18.armv5tel requires kde-runtime >= 0:4.9.5 gwenview-libs-4.9.5-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gwenview-libs-4.9.5-1.fc18.armv5tel requires libjpeg.so.62 [gyachi] gyachi-1.2.11-4.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) gyachi-1.2.11-4.fc18.armv5tel requires libjpeg.so.62 [hplip] 1:hpijs-3.12.11-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 1:hpijs-3.12.11-1.fc18.armv5tel requires libjpeg.so.62 [hugin] hugin-2011.4.0-9.fc19.armv5tel requires libjpeg.so.62 hugin-2011.4.0-9.fc19.armv5tel requires libGLEW.so.1.7 hugin-base-2011.4.0-9.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) hugin-base-2011.4.0-9.fc19.armv5tel requires libjpeg.so.62 hugin-base-2011.4.0-9.fc19.armv5tel requires libGLEW.so.1.7 [imagefactory] imagefactory-1.1.1-1.fc17.noarch requires python-libguestfs imagefactory-1.1.1-1.fc17.noarch requires iwhd >= 0:1.2 [jaffl] jaffl-0.5.9-1.fc16.noarch requires jffi [jnr-ffi] jnr-ffi-0.5.10-3.fc17.noarch requires jffi [jnr-posix] jnr-posix-1.1.8-3.fc18.noarch requires jffi [jruby] jruby-1.6.3-3.fc17.noarch requires jffi >= 0:1.0.10 [kalzium] kalzium-4.9.5-1.fc18.armv5tel requires libGLEW.so.1.7 kalzium-4.9.5-1.fc18.armv5tel requires kde-runtime >= 0:4.9.5 kalzium-libs-4.9.5-1.fc18.armv5tel requires libkdeedu(armv5tel-32) >= 0:4.9.5 kalzium-libs-4.9.5-1.fc18.armv5tel requires libGLEW.so.1.7 [kcm-fcitx] kcm-fcitx-0.4.1-1.fc19.armv5tel requires kdebase-runtime >= 0:4.9.95 [kcm_wacomtablet] kcm_wacomtablet-1.3.7-2.fc18.armv5tel requires kdebase-runtime >= 0:4.9.3 [kde-baseapps] kde-baseapps-4.9.95-1.fc19.armv5tel requires kde-runtime >= 0:4.9.95 [kde-plasma-networkmanagement] 1:kde-plasma-networkmanagement-0.9.0.5-2.fc18.armv5tel requires kdebase-runtime >= 0:4.9.4 [kde-runtime] kde-runtime-libs-4.9.2-2.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) kde-runtime-libs-4.9.2-2.fc19.armv5tel requires libjpeg.so.62 [kde-workspace] kde-workspace-4.9.2-4.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) kde-workspace-4.9.2-4.fc19.armv5tel requires libjpeg.so.62 kdm-themes-4.9.2-4.fc19.noarch requires kde-wallpapers = 0:4.9.2 [kdeaccessibility] 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kmouth >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kmousetool >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kmag >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kaccessible >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires jovie >= 0:4.9.97 [kdebindings] kdebindings-4.9.97-1.fc19.noarch requires smokeqt >= 0:4.9.97 kdebindings-4.9.97-1.fc19.noarch requires smokekde >= 0:4.9.97 kdebindings-devel-4.9.97-1.fc19.noarch requires smokeqt-devel >= 0:4.9.97 kdebindings-devel-4.9.97-1.fc19.noarch requires smokekde-devel >= 0:4.9.97 [kdeedu] kdeedu-4.9.97-1.fc19.noarch requires step >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires parley >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires pairs >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kwordquiz >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kturtle >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires ktouch >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires klettres >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kiten >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires khangman >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kgeography >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kanagram >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kalzium >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires blinken >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires rocs >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kmplot >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kig >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kbruch >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kalgebra >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires cantor >= 0:4.9.97 [kdegraphics] 7:kdegraphics-4.9.97-1.fc19.noarch requires svgpart >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires okular >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires ksnapshot >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires ksaneplugin >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kruler >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kolourpaint >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kgamma >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kdegraphics-thumbnailers >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kdegraphics-strigi-analyzer >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kdegraphics-mobipocket >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kcolorchooser >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kamera >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires gwenview >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libksane >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libkipi >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libkexiv2 >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libkdcraw >= 0:4.9.97 [kdegraphics-mobipocket] kdegraphics-mobipocket-4.9.5-1.fc18.armv5tel requires okular-libs(armv5tel-32) >= 0:4.9.5 kdegraphics-mobipocket-4.9.5-1.fc18.armv5tel requires kde-runtime >= 0:4.9.5 [kdelibs3] kdelibs3-3.5.10-42.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) kdelibs3-3.5.10-42.fc18.armv5tel requires libjpeg.so.62 [kdemultimedia] 6:kdemultimedia-4.9.97-1.fc19.noarch requires kscd >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires kmix >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires juk >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires dragon >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires audiocd-kio >= 0:4.9.97 6:kdemultimedia-libs-4.9.97-1.fc19.noarch requires libkcompactdisc >= 0:4.9.97 6:kdemultimedia-libs-4.9.97-1.fc19.noarch requires libkcddb >= 0:4.9.97 6:kdemultimedia-libs-4.9.97-1.fc19.noarch requires audiocd-kio-libs >= 0:4.9.97 [kdenetwork] 7:kdenetwork-kopete-4.9.2-1.fc19.armv5tel requires libjpeg.so.62 7:kdenetwork-kopete-libs-4.9.2-1.fc19.armv5tel requires libjpeg.so.62 7:kdenetwork-krdc-4.9.2-1.fc19.armv5tel requires libjpeg.so.62 7:kdenetwork-krfb-4.9.2-1.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 7:kdenetwork-krfb-4.9.2-1.fc19.armv5tel requires libjpeg.so.62 [kdeutils] 6:kdeutils-4.9.97-1.fc19.noarch requires sweeper >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires superkaramba >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires kremotecontrol >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires kfloppy >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires kcharselect >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires filelight >= 1:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kwallet >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires ktimer >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kgpg >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kdf >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kcalc >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires ark >= 0:4.9.97 [kimono] kimono-4.9.5-1.fc18.armv5tel requires smokekde(armv5tel-32) >= 0:4.9.5 kimono-4.9.5-1.fc18.armv5tel requires qyoto(armv5tel-32) >= 0:4.9.5 kimono-akonadi-4.9.5-1.fc18.armv5tel requires smokekde-akonadi(armv5tel-32) >= 0:4.9.5 [kphotoalbum] kphotoalbum-4.3-1.fc18.armv5tel requires marble >= 1:4.9.4 kphotoalbum-4.3-1.fc18.armv5tel requires libkipi.so.9 kphotoalbum-4.3-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) kphotoalbum-4.3-1.fc18.armv5tel requires libjpeg.so.62 kphotoalbum-4.3-1.fc18.armv5tel requires kde-runtime >= 0:4.9.4 [krecipes] krecipes-2.0-0.1.beta2.fc18.armv5tel requires kde-runtime >= 0:4.9.3 [kscope] kscope-1.9.4-8.fc18.armv5tel requires libqscintilla2.so.8 [ktp-contact-applet] ktp-contact-applet-0.5.1-1.fc18.armv5tel requires kde-runtime >= 0:4.9.4 [ktp-text-ui] ktp-text-ui-0.5.0-1.fc19.armv5tel requires libtelepathy-logger.so.2 [leechcraft] leechcraft-popishu-0.5.80-1.fc18.armv5tel requires libqscintilla2.so.8 [lessjs] lessjs-1.3.1-4.fc19.noarch requires nodejs [libclaw] libclaw-1.7.0-5.fc17.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) libclaw-1.7.0-5.fc17.armv5tel requires libjpeg.so.62 [libfm] libfm-1.1.0-1.fc19.armv5tel requires libmenu-cache.so.1 libfm-gtk-1.1.0-1.fc19.armv5tel requires libmenu-cache.so.1 [libfreenect] libfreenect-opencv-0.1.2-2.fc19.armv5tel requires libopencv_nonfree.so.2.4 libfreenect-opencv-0.1.2-2.fc19.armv5tel requires libopencv_gpu.so.2.4 [libkdcraw] libkdcraw-4.9.1-1.fc19.armv5tel requires libjpeg.so.62 [librasterlite] librasterlite-1.1c-2.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) librasterlite-1.1c-2.fc19.armv5tel requires libjpeg.so.62 [libreoffice] 1:libreoffice-binfilter-3.6.3.2-8.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 1:libreoffice-binfilter-3.6.3.2-8.fc18.armv5tel requires libjpeg.so.62 1:libreoffice-core-3.6.3.2-8.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) 1:libreoffice-core-3.6.3.2-8.fc18.armv5tel requires libjpeg.so.62 1:libreoffice-core-3.6.3.2-8.fc18.armv5tel requires libexttextcat-1.0.so.0 1:libreoffice-core-3.6.3.2-8.fc18.armv5tel requires libcmis-0.2.so.2 [lightdm-kde] lightdm-kde-0.3.1-1.fc19.armv5tel requires kde-runtime >= 0:4.9.95 [liveusb-creator] liveusb-creator-3.11.7-2.fc18.noarch requires syslinux-extlinux liveusb-creator-3.11.7-2.fc18.noarch requires syslinux [lmms] lmms-0.4.13-3.fc18.armv5tel requires libstk.so.0 [lxlauncher] lxlauncher-0.2.1-12.fc18.armv5tel requires libmenu-cache.so.1 [lxpanel] lxpanel-0.5.10-2.fc18.armv5tel requires libmenu-cache.so.1 [mapserver] mapserver-6.0.3-6.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) mapserver-6.0.3-6.fc18.armv5tel requires libjpeg.so.62 mapserver-perl-6.0.3-6.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) mapserver-perl-6.0.3-6.fc18.armv5tel requires libjpeg.so.62 mapserver-python-6.0.3-6.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) mapserver-python-6.0.3-6.fc18.armv5tel requires libjpeg.so.62 php-mapserver-6.0.3-6.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) php-mapserver-6.0.3-6.fc18.armv5tel requires libjpeg.so.62 [mate-image-viewer] mate-image-viewer-1.5.0-2.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) mate-image-viewer-1.5.0-2.fc18.armv5tel requires libjpeg.so.62 [mathgl] mathgl-1.11.2-7.fc17.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) mathgl-1.11.2-7.fc17.armv5tel requires libjpeg.so.62 [mcollective-qpid-plugin] mcollective-qpid-plugin-1.1.2-1.fc19.noarch requires ruby-qpid-qmf [merkaartor] merkaartor-0.18.0-0.3.git654e49ba.fc17.armv5tel requires libexiv2.so.11 [minetest] minetest-0.3.1-11.fc18.armv5tel requires libjpeg.so.62 [mod_security_crs] mod_security_crs-2.2.6-4.fc19.noarch requires mod_security >= 0:2.7.0 [monkeystudio] monkeystudio-1.9.0.2-2.20120501svn4458.fc18.armv5tel requires libqscintilla2.so.8 [mpi4py] mpi4py-mpich2-1.3-5.fc18.armv5tel requires libmpich.so.3 python3-mpi4py-mpich2-1.3-5.fc18.armv5tel requires libmpich.so.3 [mygui] mygui-3.2.0-2.fc19.armv5tel requires libCommon.so mygui-demos-3.2.0-2.fc19.armv5tel requires libCommon.so mygui-tools-3.2.0-2.fc19.armv5tel requires libCommon.so [nagios] nagios-3.4.3-3.fc18.armv5tel requires libjpeg.so.62 [nautilus] nautilus-3.6.3-4.fc18.armv5tel requires libgnome-desktop-3.so.4 [nautilus-open-terminal] nautilus-open-terminal-0.19-6.fc18.armv5tel requires libgnome-desktop-3.so.4 [ncl] ncl-6.0.0-7.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ncl-6.0.0-7.fc18.armv5tel requires libjpeg.so.62 [netcdf-cxx4] netcdf-cxx4-mpich2-4.2-6.fc18.armv5tel requires libmpichcxx.so.3 netcdf-cxx4-mpich2-4.2-6.fc18.armv5tel requires libmpich.so.3 [nfsometer] nfsometer-1.3-1.fc19.noarch requires filebench [nip2] nip2-7.28.5-1.fc18.armv5tel requires libjpeg.so.62 [node-gyp] node-gyp-0.8.2-3.fc19.noarch requires npm(semver) < 0:2 node-gyp-0.8.2-3.fc19.noarch requires npm(semver) >= 0:1 node-gyp-0.8.2-3.fc19.noarch requires npm(request) node-gyp-0.8.2-3.fc19.noarch requires nodejs-devel node-gyp-0.8.2-3.fc19.noarch requires nodejs(engine) >= 0:0.6.0 [nodejs-abbrev] nodejs-abbrev-1.0.4-2.fc19.noarch requires nodejs(engine) [nodejs-ansi] nodejs-ansi-0.1.2-4.fc19.noarch requires nodejs(engine) [nodejs-archy] nodejs-archy-0.0.2-5.fc19.noarch requires nodejs(engine) [nodejs-async] nodejs-async-0.1.22-3.fc19.noarch requires nodejs(engine) [nodejs-block-stream] nodejs-block-stream-0.0.6-4.fc19.noarch requires nodejs(engine) [nodejs-charm] nodejs-charm-0.1.0-1.fc19.noarch requires nodejs(engine) [nodejs-chownr] nodejs-chownr-0.0.1-6.fc19.noarch requires nodejs(engine) [nodejs-config-chain] nodejs-config-chain-1.1.3-3.fc19.noarch requires nodejs(engine) [nodejs-couch-login] nodejs-couch-login-0.1.15-2.fc19.noarch requires npm(request) nodejs-couch-login-0.1.15-2.fc19.noarch requires nodejs(engine) [nodejs-delayed-stream] nodejs-delayed-stream-0.0.5-2.fc19.noarch requires nodejs(engine) >= 0:0.4.0 [nodejs-form-data] nodejs-form-data-0.0.6-2.fc19.noarch requires npm(combined-stream) = 0:0.0.3 nodejs-form-data-0.0.6-2.fc19.noarch requires nodejs(engine) [nodejs-fstream] nodejs-fstream-0.1.21-3.fc19.noarch requires nodejs(engine) >= 0:0.6 [nodejs-fstream-npm] nodejs-fstream-npm-0.1.3-2.fc19.noarch requires npm(fstream-ignore) < 0:0.1 nodejs-fstream-npm-0.1.3-2.fc19.noarch requires npm(fstream-ignore) >= 0:0.0.5 nodejs-fstream-npm-0.1.3-2.fc19.noarch requires nodejs(engine) [nodejs-glob] nodejs-glob-3.1.14-2.fc19.noarch requires nodejs(engine) [nodejs-graceful-fs] nodejs-graceful-fs-1.1.14-2.fc19.noarch requires nodejs(engine) >= 0:0.4.0 [nodejs-inherits] nodejs-inherits-1.0.0-6.fc19.noarch requires nodejs(engine) [nodejs-ini] nodejs-ini-1.0.5-2.fc19.noarch requires nodejs(engine) [nodejs-init-package-json] nodejs-init-package-json-0.0.7-3.fc19.noarch requires npm(semver) < 0:2 nodejs-init-package-json-0.0.7-3.fc19.noarch requires npm(semver) >= 0:1 nodejs-init-package-json-0.0.7-3.fc19.noarch requires nodejs(engine) [nodejs-lockfile] nodejs-lockfile-0.2.1-2.fc19.noarch requires nodejs(engine) [nodejs-lru-cache] nodejs-lru-cache-2.2.1-2.fc19.noarch requires nodejs(engine) [nodejs-mime] nodejs-mime-1.2.7-2.fc19.noarch requires nodejs(engine) [nodejs-minimatch] nodejs-minimatch-0.2.9-2.fc19.noarch requires nodejs(engine) [nodejs-mkdirp] nodejs-mkdirp-0.3.4-2.fc19.noarch requires nodejs(engine) [nodejs-mute-stream] nodejs-mute-stream-0.0.3-3.fc19.noarch requires nodejs(engine) [nodejs-nopt] nodejs-nopt-2.0.0-3.fc19.noarch requires nodejs(engine) [nodejs-npm-registry-client] nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires npm(semver) < 0:1.2 nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires npm(semver) >= 0:1.1.0 nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires npm(request) nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires nodejs(engine) [nodejs-npmconf] nodejs-npmconf-0.0.16-3.fc19.noarch requires nodejs(engine) [nodejs-npmlog] nodejs-npmlog-0.0.2-2.fc19.noarch requires nodejs(engine) [nodejs-once] nodejs-once-1.1.1-2.fc19.noarch requires nodejs(engine) [nodejs-opts] nodejs-opts-1.2.2-2.fc19.noarch requires nodejs(engine) >= 0:0.1.90 [nodejs-osenv] nodejs-osenv-0.0.3-2.fc19.noarch requires nodejs(engine) [nodejs-promzard] nodejs-promzard-0.2.0-3.fc19.noarch requires nodejs(engine) [nodejs-proto-list] nodejs-proto-list-1.2.2-2.fc19.noarch requires nodejs(engine) [nodejs-read] nodejs-read-1.0.4-4.fc19.noarch requires nodejs(engine) >= 0:0.8 [nodejs-read-installed] nodejs-read-installed-0.0.4-2.fc19.noarch requires npm(semver) < 0:2 nodejs-read-installed-0.0.4-2.fc19.noarch requires npm(semver) >= 0:1 nodejs-read-installed-0.0.4-2.fc19.noarch requires nodejs(engine) [nodejs-read-package-json] nodejs-read-package-json-0.1.12-2.fc19.noarch requires npm(semver) < 0:2 nodejs-read-package-json-0.1.12-2.fc19.noarch requires npm(semver) >= 0:1 nodejs-read-package-json-0.1.12-2.fc19.noarch requires nodejs(engine) [nodejs-retry] nodejs-retry-0.6.0-2.fc19.noarch requires nodejs(engine) [nodejs-rimraf] nodejs-rimraf-2.1.1-2.fc19.noarch requires nodejs(engine) [nodejs-sigmund] nodejs-sigmund-1.0.0-2.fc19.noarch requires nodejs(engine) [nodejs-slide] nodejs-slide-1.1.3-4.fc19.noarch requires nodejs(engine) [nodejs-tar] nodejs-tar-0.1.14-3.fc19.noarch requires nodejs(engine) [nodejs-uid-number] nodejs-uid-number-0.0.3-4.fc19.noarch requires nodejs(engine) [nodejs-which] nodejs-which-1.0.5-4.fc19.noarch requires nodejs(engine) [nodejs-yamlish] nodejs-yamlish-0.0.5-1.fc19.noarch requires nodejs(engine) [nut] nut-cgi-2.6.5-6.fc19.armv5tel requires libjpeg.so.62 [ocaml-camlimages] ocaml-camlimages-4.0.1-7.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ocaml-camlimages-4.0.1-7.fc18.armv5tel requires libjpeg.so.62 [ocaml-libvirt] ocaml-libvirt-0.6.1.2-5.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 [ocaml-xml-light] ocaml-xml-light-2.3-0.1.svn234.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 [octave] 6:octave-3.6.3-2.fc19.armv5tel requires libcxsparse.so.2 6:octave-3.6.3-2.fc19.armv5tel requires libcholmod.so.1 6:octave-3.6.3-2.fc19.armv5tel requires libGraphicsMagick.so.3 6:octave-3.6.3-2.fc19.armv5tel requires libGraphicsMagick++.so.3 6:octave-3.6.3-2.fc19.armv5tel requires hdf5 = 0:1.8.9 [okular] okular-part-4.9.2-1.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) okular-part-4.9.2-1.fc19.armv5tel requires libjpeg.so.62 [opencv] opencv-2.4.3-3.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) opencv-2.4.3-3.fc18.armv5tel requires libjpeg.so.62 [openlierox] openlierox-0.57-0.16.beta8.fc15.armv5tel requires libzip.so.1 [openpts] openpts-0.2.6-5.fc19.armv5tel requires tboot [openscad] openscad-2013.01.08-1.fc18.armv5tel requires libGLEW.so.1.7 [openshift-origin-broker] openshift-origin-broker-1.1.1-2.fc19.noarch requires mongodb-server [openstack-nova] openstack-nova-compute-2013.1-0.3.g1.fc19.noarch requires qemu-kvm openstack-nova-compute-2013.1-0.3.g1.fc19.noarch requires python-libguestfs [osm2pgsql] osm2pgsql-0.70.5-0.9.20121021svn.fc18.armv5tel requires libgeos-3.3.2.so [ovirt-node] ovirt-node-2.5.1-1.fc19.noarch requires grub2 [oz] oz-0.9.0-1.fc19.noarch requires python-libguestfs [pandoc] ghc-pandoc-devel-1.9.4.2-5.fc19.armv5tel requires ghc-devel(citeproc-hs-0.3.4-52860e1ffa82c88d0e3315516bf87ffd) [perl-GD] perl-GD-2.44-12.fc18.armv5tel requires libjpeg.so.62 [perl-Language-Prolog-Yaswi] perl-Language-Prolog-Yaswi-0.21-6.fc19.armv5tel requires libswipl.so.6.2.2 [perl-MongoDB] perl-MongoDB-0.41-3.fc15.armv5tel requires perl(:MODULE_COMPAT_5.12.4) [petitboot] petitboot-0.2-7.fc17.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) petitboot-0.2-7.fc17.armv5tel requires libjpeg.so.62 [pharosc] pharosc-xcircuit-8.3-6.fc18.noarch requires xcircuit [photoprint] photoprint-0.4.2-0.8.pre2.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) photoprint-0.4.2-0.8.pre2.fc18.armv5tel requires libjpeg.so.62 [php-pecl-gearman] php-pecl-gearman-1.0.2-1.fc18.armv5tel requires libgearman.so.6 [plasma-mobile] plasma-mobile-0.4-1.fc18.armv5tel requires kde-workspace >= 0:4.9.4 [ppl] ppl-java-1.0-3.fc19.3.armv5tel requires jpackage-utils(armv5tel-32) ppl-java-1.0-3.fc19.3.armv5tel requires java(armv5tel-32) >= 1:1.6.0 ppl-java-javadoc-1.0-3.fc19.3.armv5tel requires jpackage-utils(armv5tel-32) [pygame] pygame-1.9.1-11.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) pygame-1.9.1-11.fc18.armv5tel requires libjpeg.so.62 [pyicq-t] pyicq-t-0.8.1.5-16.fc19.noarch requires python-pillow [pypar] pypar-mpich2-2.1.4_94-7.fc18.armv5tel requires libmpich.so.3 [python-basemap] python-basemap-0.99.4-14.fc18.armv5tel requires libgeos-3.3.2.so [qlandkartegt] qlandkartegt-1.4.0-2.fc17.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) qlandkartegt-1.4.0-2.fc17.armv5tel requires libjpeg.so.62 [quake3] quake3-1.36-14.svn2102.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) quake3-1.36-14.svn2102.fc18.armv5tel requires libjpeg.so.62 [qyoto] qyoto-4.9.2-1.fc19.armv5tel requires libqscintilla2.so.8 [rakudo-star] rakudo-star-0.0.2011.07_3.6.0-5.fc18.1.armv5tel requires libparrot.so.3.6.0 [rekonq] rekonq-2.0-1.fc19.armv5tel requires kde-runtime >= 0:4.9.95 [remmina] remmina-plugins-vnc-1.0.0-5.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) remmina-plugins-vnc-1.0.0-5.fc18.armv5tel requires libjpeg.so.62 [rootplot] rootplot-2.2.1-6.fc18.noarch requires root-python [rosa-launcher] rosa-launcher-2.0.0-1.fc19.armv5tel requires kdebase-runtime >= 0:4.9.95 [ruby-korundum] ruby-korundum-4.9.5-1.fc18.armv5tel requires smokekde(armv5tel-32) >= 0:4.9.5 ruby-korundum-4.9.5-1.fc18.armv5tel requires ruby-qt(armv5tel-32) >= 0:4.9.5 ruby-korundum-akonadi-4.9.5-1.fc18.armv5tel requires smokekde-akonadi(armv5tel-32) >= 0:4.9.5 [ruby-qt] ruby-qt-4.9.2-1.fc19.armv5tel requires libqscintilla2.so.8 [ruby-spqr] ruby-spqr-0.3.6-3.fc18.noarch requires ruby-qmf [rubygem-RedCloth] rubygem-RedCloth-4.2.3-3.fc17.armv5tel requires ruby(abi) = 0:1.8 rubygem-RedCloth-4.2.3-3.fc17.armv5tel requires libruby.so.1.8 [rubygem-boxgrinder-build] rubygem-boxgrinder-build-0.10.4-1.fc19.noarch requires ruby-libguestfs [rubygem-childprocess] rubygem-childprocess-0.3.6-1.fc19.noarch requires rubygem(ffi) < 0:1.1 rubygem-childprocess-0.3.6-1.fc19.noarch requires rubygem(ffi) >= 0:1.0.6 [rubygem-net-ping] rubygem-net-ping-1.5.3-6.fc19.noarch requires rubygem(net-ldap) < 0:0.3 rubygem-net-ping-1.5.3-6.fc19.noarch requires rubygem(ffi) >= 0:1.0.0 [rubygem-openshift-origin-msg-broker-mcollective] rubygem-openshift-origin-msg-broker-mcollective-1.2.7-2.fc19.noarch requires ruby-qpid-qmf rubygem-openshift-origin-msg-broker-mcollective-1.2.7-2.fc19.noarch requires qpid-cpp-server rubygem-openshift-origin-msg-broker-mcollective-1.2.7-2.fc19.noarch requires qpid-cpp-client [rubygem-rb-inotify] rubygem-rb-inotify-0.8.8-1.fc18.noarch requires rubygem(ffi) [rubygem-selenium-webdriver] rubygem-selenium-webdriver-2.3.2-4.fc18.noarch requires rubygem(ffi) >= 0:1.0.7 [scala] scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library) [scirenderer] scirenderer-1.0.2-4.fc19.noarch requires jogl2 [scotch] scotch-5.1.11-3.fc18.armv5tel requires libmpich.so.3 [seamonkey] seamonkey-2.13.2-2.fc18.armv5tel requires libjpeg.so.62 [sear] sear-0.6.4-0.9.g0b70ddb.fc18.armv5tel requires libwfmath-0.3.so.6 sear-0.6.4-0.9.g0b70ddb.fc18.armv5tel requires libvarconf-1.0.so.7 sear-0.6.4-0.9.g0b70ddb.fc18.armv5tel requires libskstream-0.3.so.6 sear-0.6.4-0.9.g0b70ddb.fc18.armv5tel requires libmercator-0.3.so.1 sear-0.6.4-0.9.g0b70ddb.fc18.armv5tel requires libjpeg.so.62 sear-0.6.4-0.9.g0b70ddb.fc18.armv5tel requires liberis-1.3.so.19 [smb4k] smb4k-1.0.5-1.fc19.armv5tel requires kdebase-runtime >= 0:4.9.95 [smokeqt] smokeqt-4.9.2-1.fc19.armv5tel requires libqscintilla2.so.8 [spacewalk-web] spacewalk-dobby-1.8.49-1.fc19.noarch requires perl(Spacewalk::Setup) [speed-dreams] speed-dreams-2.1.0-11.trunk_r4810.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) speed-dreams-2.1.0-11.trunk_r4810.fc19.armv5tel requires libjpeg.so.62 [spice-gtk] spice-glib-0.12.101-1.fc19.armv5tel requires libusbredirparser.so.0 spice-glib-0.12.101-1.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) spice-glib-0.12.101-1.fc19.armv5tel requires libjpeg.so.62 spice-gtk-0.12.101-1.fc19.armv5tel requires libusbredirparser.so.0 spice-gtk-0.12.101-1.fc19.armv5tel requires libjpeg.so.62 spice-gtk-python-0.12.101-1.fc19.armv5tel requires libusbredirparser.so.0 spice-gtk-python-0.12.101-1.fc19.armv5tel requires libjpeg.so.62 spice-gtk-tools-0.12.101-1.fc19.armv5tel requires libusbredirparser.so.0 spice-gtk-tools-0.12.101-1.fc19.armv5tel requires libjpeg.so.62 spice-gtk3-0.12.101-1.fc19.armv5tel requires libusbredirparser.so.0 spice-gtk3-0.12.101-1.fc19.armv5tel requires libjpeg.so.62 [spring-installer] ca-installer-20090316-12.fc18.armv5tel requires spring spring-installer-20090316-12.fc18.armv5tel requires spring [spring-maps-default] spring-maps-default-0.1-9.fc18.noarch requires spring [springlobby] springlobby-0.147-1.fc19.armv5tel requires spring [sssd] sssd-1.9.3-1.fc18.armv5tel requires libldb(armv5tel-32) = 0:1.1.13 [supertuxkart] supertuxkart-0.7.3-2.fc19.armv5tel requires libIrrlicht18.so.1 supertuxkart-0.7.3-2.fc19.armv5tel requires libIrrXML18.so.1 [synce-gnome] synce-gnome-0.11-7.fc18.noarch requires odccm [synce-kpm] synce-kpm-0.15.1-3.fc18.noarch requires odccm [telepathy-logger-qt] telepathy-logger-qt-0.5.0-1.fc19.armv5tel requires libtelepathy-logger.so.2 [tex-musixtex] tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf [thermostat] thermostat-0.4.0-3.fc18.armv5tel requires mongodb-server thermostat-0.4.0-3.fc18.armv5tel requires mongodb [tomahawk] tomahawk-0.4.2-1.fc18.armv5tel requires libechonest.so.1.2 tomahawk-0.4.2-1.fc18.armv5tel requires libattica.so.0.3 [tracker] tracker-0.14.2-4.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) tracker-0.14.2-4.fc19.armv5tel requires libjpeg.so.62 [ufraw] ufraw-0.18-14.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ufraw-0.18-14.fc19.armv5tel requires libjpeg.so.62 ufraw-cinepaint-0.18-14.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ufraw-cinepaint-0.18-14.fc19.armv5tel requires libjpeg.so.62 ufraw-gimp-0.18-14.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) ufraw-gimp-0.18-14.fc19.armv5tel requires libjpeg.so.62 [usb_modeswitch-data] usb_modeswitch-data-20121109-1.fc19.noarch requires usb_modeswitch >= 0:1.2.5 [vdrift] vdrift-20120722-1.fc18.armv5tel requires libGLEW.so.1.7 [vdsm] vdsm-4.10.0-11.fc18.armv5tel requires qemu-kvm >= 2:0.15.0-4 vdsm-4.10.0-11.fc18.armv5tel requires dmidecode [vegastrike-data] vegastrike-data-0.5.1-2.r1.fc18.noarch requires vegastrike >= 0:0.5.1 [vigra] vigra-1.8.0-6.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) vigra-1.8.0-6.fc18.armv5tel requires libjpeg.so.62 vigra-python-1.8.0-6.fc18.armv5tel requires libjpeg.so.62 [vips] vips-7.28.5-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) vips-7.28.5-1.fc18.armv5tel requires libjpeg.so.62 vips-python-7.28.5-1.fc18.armv5tel requires libjpeg.so.62 vips-tools-7.28.5-1.fc18.armv5tel requires libjpeg.so.62 [vtk] vtk-examples-5.10.1-2.fc19.armv5tel requires vtkdata = 0:5.10.1 vtk-testing-5.10.1-2.fc19.armv5tel requires vtkdata = 0:5.10.1 [wallaby] python-wallaby-0.16.0-1.fc18.noarch requires python-qpid-qmf ruby-wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-http-server-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-utils-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 [warzone2100] warzone2100-3.1-0.9.rc2.fc19.armv5tel requires libGLEW.so.1.7 [webkitgtk3] webkitgtk3-1.10.2-1.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) webkitgtk3-1.10.2-1.fc18.armv5tel requires libjpeg.so.62 [weka] weka-3.6.8-1.fc19.noarch requires javasqlite [whenjobs] whenjobs-0.7.3-3.fc19.armv5tel requires ocaml(runtime) = 0:4.00.0 [wxMaxima] wxMaxima-12.09.0-1.fc18.armv5tel requires maxima >= 0:5.20 [xemacs-packages-base] xemacs-packages-base-20121228-1.fc19.noarch requires xemacs(bin) >= 0:21.5.33 [xine-ui] xine-ui-0.99.7-2.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) xine-ui-0.99.7-2.fc19.armv5tel requires libjpeg.so.62 [xorg-x11-drivers] xorg-x11-drivers-7.7-1.fc19.armv5tel requires xorg-x11-drv-nv [xorg-x11-drv-apm] xorg-x11-drv-apm-1.2.5-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-apm-1.2.5-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-ast] xorg-x11-drv-ast-0.97.0-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-ast-0.97.0-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-ati] xorg-x11-drv-ati-7.0.0-0.8.20121015gitbd9e2c064.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-ati-7.0.0-0.8.20121015gitbd9e2c064.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-cirrus] xorg-x11-drv-cirrus-1.5.1-3.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-cirrus-1.5.1-3.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-dummy] xorg-x11-drv-dummy-0.3.6-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-dummy-0.3.6-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-evdev] xorg-x11-drv-evdev-2.7.3-1.fc19.armv5tel requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-evdev-2.7.3-1.fc19.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-fbdev] xorg-x11-drv-fbdev-0.4.3-3.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-fbdev-0.4.3-3.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-glint] xorg-x11-drv-glint-1.2.8-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-glint-1.2.8-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-i128] xorg-x11-drv-i128-1.3.6-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-i128-1.3.6-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-i740] xorg-x11-drv-i740-1.3.4-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-i740-1.3.4-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-ivtv] xorg-x11-drv-ivtv-1.2.0-0.1.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-ivtv-1.2.0-0.1.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-keyboard] xorg-x11-drv-keyboard-1.6.2-3.fc18.armv5tel requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-keyboard-1.6.2-3.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-mach64] xorg-x11-drv-mach64-6.9.3-6.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-mach64-6.9.3-6.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-mga] xorg-x11-drv-mga-1.6.1-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-mga-1.6.1-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-modesetting] xorg-x11-drv-modesetting-0.4.0-4.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-modesetting-0.4.0-4.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-mouse] xorg-x11-drv-mouse-1.8.1-3.fc18.armv5tel requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-mouse-1.8.1-3.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-nouveau] 1:xorg-x11-drv-nouveau-1.0.2-1.fc19.armv5tel requires xserver-abi(videodrv-13) >= 0:0 1:xorg-x11-drv-nouveau-1.0.2-1.fc19.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-qxl] xorg-x11-drv-qxl-0.0.22-5.20120718gitde6620788.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-qxl-0.0.22-5.20120718gitde6620788.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-r128] xorg-x11-drv-r128-6.9.1-1.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-r128-6.9.1-1.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-rendition] xorg-x11-drv-rendition-4.2.5-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-rendition-4.2.5-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-s3virge] xorg-x11-drv-s3virge-1.10.6-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-s3virge-1.10.6-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-savage] xorg-x11-drv-savage-2.3.6-4.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-savage-2.3.6-4.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-siliconmotion] xorg-x11-drv-siliconmotion-1.7.7-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-siliconmotion-1.7.7-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-sis] xorg-x11-drv-sis-0.10.7-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-sis-0.10.7-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-sisusb] xorg-x11-drv-sisusb-0.9.6-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-sisusb-0.9.6-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-synaptics] xorg-x11-drv-synaptics-1.6.2-6.fc19.armv5tel requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-synaptics-1.6.2-6.fc19.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-tdfx] xorg-x11-drv-tdfx-1.4.5-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-tdfx-1.4.5-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-trident] xorg-x11-drv-trident-1.3.6-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-trident-1.3.6-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-v4l] xorg-x11-drv-v4l-0.2.0-23.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-v4l-0.2.0-23.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-vesa] xorg-x11-drv-vesa-2.3.2-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-vesa-2.3.2-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-void] xorg-x11-drv-void-1.4.0-12.fc18.armv5tel requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-void-1.4.0-12.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-voodoo] xorg-x11-drv-voodoo-1.2.5-2.fc18.armv5tel requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-voodoo-1.2.5-2.fc18.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-wacom] xorg-x11-drv-wacom-0.17.0-1.fc19.armv5tel requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-wacom-0.17.0-1.fc19.armv5tel requires xserver-abi(ansic-0) >= 0:4 [xsane] xsane-0.998-12.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) xsane-0.998-12.fc19.armv5tel requires libjpeg.so.62 xsane-gimp-0.998-12.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) xsane-gimp-0.998-12.fc19.armv5tel requires libjpeg.so.62 [yelp] 1:yelp-3.6.2-1.fc18.armv5tel requires yelp-xsl [yelp-tools] yelp-tools-3.6.1-1.fc18.noarch requires yelp-xsl [zbar] zbar-0.10-11.fc18.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) zbar-0.10-11.fc18.armv5tel requires libjpeg.so.62 zbar-gtk-0.10-11.fc18.armv5tel requires libjpeg.so.62 zbar-pygtk-0.10-11.fc18.armv5tel requires libjpeg.so.62 zbar-qt-0.10-11.fc18.armv5tel requires libjpeg.so.62 [zoneminder] zoneminder-1.25.0-9.fc19.armv5tel requires libjpeg.so.62(LIBJPEG_6.2) zoneminder-1.25.0-9.fc19.armv5tel requires libjpeg.so.62 Broken deps for armhfp ---------------------------------------------------------- [ClanLib] ClanLib-2.3.6-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ClanLib-2.3.6-3.fc18.armv7hl requires libjpeg.so.62 [ClanLib06] ClanLib06-0.6.5-23.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ClanLib06-0.6.5-23.fc18.armv7hl requires libjpeg.so.62 [GREYCstoration] GREYCstoration-2.8-11.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) GREYCstoration-2.8-11.fc18.armv7hl requires libjpeg.so.62 [Io-language] Io-language-graphics-and-sound-20110912-6.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) Io-language-graphics-and-sound-20110912-6.fc19.armv7hl requires libjpeg.so.62 [LabPlot] LabPlot-1.6.0.3-1.fc18.armv7hl requires libaudiofile.so.0 [PyQt] PyQt-3.18.1-14.fc18.armv7hl requires libjpeg.so.62 [WindowMaker] WINGs-libs-0.95.3-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) WINGs-libs-0.95.3-3.fc18.armv7hl requires libjpeg.so.62 [aeolus-conductor] aeolus-all-0.10.6-2.fc18.noarch requires mongodb-server aeolus-all-0.10.6-2.fc18.noarch requires iwhd [amarok] amarok-2.6.90-2.fc19.armv7hl requires kde-runtime >= 0:4.9.95 [amsn] amsn-0.98.9-4.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) amsn-0.98.9-4.fc18.armv7hl requires libjpeg.so.62 [apper] apper-0.8.0-0.11.20121126git.fc18.armv7hl requires kde-runtime >= 0:4.9.4 [asterisk] asterisk-fax-10.0.0-2.fc18.1.armv7hl requires libtiff.so.3 asterisk-snmp-10.0.0-2.fc18.1.armv7hl requires perl(:MODULE_COMPAT_5.14.2) asterisk-snmp-10.0.0-2.fc18.1.armv7hl requires librpmio.so.2 asterisk-snmp-10.0.0-2.fc18.1.armv7hl requires librpm.so.2 [audiocd-kio] audiocd-kio-4.9.90-1.fc19.armv7hl requires kde-runtime >= 0:4.9.95 audiocd-kio-libs-4.9.90-1.fc19.armv7hl requires libkcompactdisc(armv7hl-32) >= 0:4.9.95 audiocd-kio-libs-4.9.90-1.fc19.armv7hl requires libkcddb(armv7hl-32) >= 0:4.9.95 [avogadro] avogadro-1.0.3-12.fc19.armv7hl requires libGLEW.so.1.7 avogadro-libs-1.0.3-12.fc19.armv7hl requires libGLEW.so.1.7 [blender] 1:blender-2.63a-10.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 1:blender-2.63a-10.fc19.armv7hl requires libjpeg.so.62 1:blender-2.63a-10.fc19.armv7hl requires libGLEW.so.1.7 1:blenderplayer-2.63a-10.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 1:blenderplayer-2.63a-10.fc19.armv7hl requires libjpeg.so.62 1:blenderplayer-2.63a-10.fc19.armv7hl requires libGLEW.so.1.7 [bochs] bochs-2.6-1.fc19.armv7hl requires bochs-bios = 0:2.6-1.fc19 [bootconf] bootconf-1.4-6.fc18.noarch requires grub [calligra] calligra-core-2.5.4-1.fc18.armv7hl requires kdebase-runtime >= 0:4.9.4 calligra-karbon-2.5.4-1.fc18.armv7hl requires libjpeg.so.62 calligra-kexi-map-form-widget-2.5.4-1.fc18.armv7hl requires marble >= 1:4.9.4 calligra-krita-2.5.4-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) calligra-krita-2.5.4-1.fc18.armv7hl requires libjpeg.so.62 calligra-krita-2.5.4-1.fc18.armv7hl requires libGLEW.so.1.7 calligra-krita-libs-2.5.4-1.fc18.armv7hl requires libGLEW.so.1.7 calligra-okular-odpgenerator-2.5.4-1.fc18.armv7hl requires okular >= 0:4.9.4 calligra-reports-map-element-2.5.4-1.fc18.armv7hl requires marble >= 1:4.9.4 [calligra-l10n] calligra-l10n-2.5.93-1.fc19.noarch requires calligra-core >= 0:2.5.93 [celestia] celestia-1.6.1-6.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) celestia-1.6.1-6.fc18.armv7hl requires libjpeg.so.62 [cheese] 2:cheese-3.6.2-1.fc18.armv7hl requires libgnome-desktop-3.so.4 2:cheese-libs-3.6.2-1.fc18.armv7hl requires libgnome-desktop-3.so.4 [cinepaint] cinepaint-libs-1.3-4.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) cinepaint-libs-1.3-4.fc18.armv7hl requires libjpeg.so.62 [cinnamon] cinnamon-1.6.7-2.fc18.armv7hl requires libgnome-desktop-3.so.4 [clean-extra-utils] clean-extra-utils-0.1-1.fc19.armv7hl requires clean [cloud-init] cloud-init-0.7.0-1.fc18.noarch requires dmidecode [coccinella] coccinella-0.96.20-4.fc18.noarch requires iaxclient [condor-cloud] condor-cloud-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 condor-cloud-node-0.1-5.fc18.noarch requires qemu-kvm >= 0:0.14 condor-cloud-node-0.1-5.fc18.noarch requires condor-vm-gahp >= 0:7.7.0 [condor-ec2-enhanced] condor-ec2-enhanced-1.3.1-1.fc19.noarch requires condor >= 0:7.4.4-0.9 [condor-ec2-enhanced-hooks] condor-ec2-enhanced-hooks-1.3.1-1.fc19.noarch requires condor >= 0:7.2.0-4 [condor-job-hooks] condor-job-hooks-1.5-6.fc18.noarch requires condor >= 0:7.0.2-4 [condor-low-latency] condor-low-latency-1.2-2.fc18.2.noarch requires condor >= 0:7.0.2-4 [condor-wallaby] condor-wallaby-client-5.0.3-1.fc19.noarch requires python-qmf >= 0:0.9.1073306 condor-wallaby-client-5.0.3-1.fc19.noarch requires condor >= 0:7.4.4-0.9 [contour] contour-0.3-1.fc18.armv7hl requires kde-runtime >= 0:4.9.3 [control-center] 1:control-center-3.6.3-1.fc18.armv7hl requires libgnome-desktop-3.so.4 [coq] coq-8.4-1.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkTree) = 0:fbfcb4129253ccc61b07e95fc884b43b coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkThread) = 0:ef5b249d4af0f4f90eb991407ae53d3a coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkText) = 0:bbba6ca7afaed7b789d2b545308039b7 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkSignal) = 0:40cae66e85ec9d92363e99ab49ea8ce6 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkPackProps) = 0:2815066310c90240e2f295efb031e008 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkPack) = 0:f01c49a93091edd644dd3c81e82b670e coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkMain) = 0:136dceeebea50518bb23d5608f265036 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkEnums) = 0:0c703e1dac4d056ea0bc450e99f597e5 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkData) = 0:130caaaa62a9faecfe8f624df72a9434 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkButton) = 0:a8d70be67c92d33c403b6f04a06b9869 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkBaseProps) = 0:8ef17db6754fc20a7303c451a798c319 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GtkBase) = 0:95ebb1139c4ecb64afe71c2e024fa8b6 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(Gobject) = 0:65f4b079004bddd8960117f8b7ba3b43 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(Glib) = 0:0557158580d573c73e54a0e092bcdb6e coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GdkKeysyms) = 0:9b8ec1329362407f66e4cde66071bea7 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GdkEvent) = 0:a07cb442ac61635e8b9501a010e5737c coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GdkEnums) = 0:6456774ccb10c2892915bca4512c4f6d coq-coqide-8.4-1.fc19.armv7hl requires ocaml(Gdk) = 0:2249830890d06ca283a90c548caec46f coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GWindow) = 0:200762a6c68891da87d2caadc0ed4502 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GTree) = 0:ee57a7e3dd7ed82c73559ae42a488760 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GToolbox) = 0:3f8567efad59e19075dfdef5075d9b26 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GText) = 0:09abcc26d15d77bd9ab5923f4a0d9ce0 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GRange) = 0:0bdc0491017d2255021a68128392bc5c coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GPack) = 0:b98c2508aa5d5c1f2b5e55750d9efdae coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GObj) = 0:54fb0d9be12943809e58ce2a201e8a5f coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GMisc) = 0:50cafd209d922ed2beae7329392d77d3 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GMenu) = 0:d7b7921230cecd4cb87a245367dee540 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GList) = 0:11b5f38428ffd21158b5407824101b9e coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GFile) = 0:5d6b251fb77c75c352d3095ba9fd7b97 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GEdit) = 0:e5ef8b0bb8e268c6550045985b2b1522 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GDraw) = 0:65c96e832a892d832d36d29aa186fc37 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GContainer) = 0:1cf49582a74c278b07a2283f28487d89 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GButton) = 0:bd9944f5965dbdb176266014b1c6eb58 coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GBroken) = 0:80b4f54e859d301713a31114b904e60d coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GBin) = 0:762daa4bcabc3cdff60a9960a151659e coq-coqide-8.4-1.fc19.armv7hl requires ocaml(GAction) = 0:ce4cf98afb8cf4eb4c4481feb408b1ba [cumin] cumin-0.1.5522-4.fc19.noarch requires python-qpid-qmf [cyphesis] cyphesis-0.5.26-7.fc18.armv7hl requires libwfmath-0.3.so.6 cyphesis-0.5.26-7.fc18.armv7hl requires libvarconf-1.0.so.7 cyphesis-0.5.26-7.fc18.armv7hl requires libskstream-0.3.so.6 cyphesis-0.5.26-7.fc18.armv7hl requires libmercator-0.3.so.1 [dbmail] dbmail-3.0.2-4.fc18.armv7hl requires vixie-cron [digikam] digikam-2.9.0-3.fc18.armv7hl requires libkipi.so.9 digikam-2.9.0-3.fc18.armv7hl requires kdebase-runtime >= 0:4.9.4 digikam-libs-2.9.0-3.fc18.armv7hl requires libkipi.so.9 digikam-libs-2.9.0-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) digikam-libs-2.9.0-3.fc18.armv7hl requires libjpeg.so.62 kipi-plugins-2.9.0-3.fc18.armv7hl requires libkipi.so.9 kipi-plugins-2.9.0-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) kipi-plugins-2.9.0-3.fc18.armv7hl requires libjpeg.so.62 kipi-plugins-libs-2.9.0-3.fc18.armv7hl requires libkipi.so.9 kipi-plugins-libs-2.9.0-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) kipi-plugins-libs-2.9.0-3.fc18.armv7hl requires libjpeg.so.62 libkgeomap-2.9.0-3.fc18.armv7hl requires marble >= 1:4.9.4 [dmapd] dmapd-0.0.48-2.fc18.armv7hl requires libjpeg.so.62 [dmlite-plugins-memcache] dmlite-plugins-memcache-0.4.0-1.fc18.armv7hl requires libmemcached.so.10 [dnf] dnf-0.2.20-1.gitdec970f.fc19.noarch requires python-hawkey = 0:0.3.6 [dogtag-pki] dogtag-pki-10.0.1-1.fc19.noarch requires pki-tools >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-symkey >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-server >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-javadoc >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-ca >= 0:10.0.1 dogtag-pki-10.0.1-1.fc19.noarch requires pki-base >= 0:10.0.1 [dwatch] dwatch-0.1.1-10.fc18.armv7hl requires vixie-cron [e16] e16-1.0.11-1.fc18.armv7hl requires libaudiofile.so.0 [ebview] ebview-0.3.6.2-7.fc18.armv7hl requires VLGothic-fonts [eclipse-linuxtools] eclipse-perf-1.2.0-1.fc19.noarch requires perf [ekiga] ekiga-3.9.90-1.fc19.armv7hl requires libpt.so.2.10.7 ekiga-3.9.90-1.fc19.armv7hl requires libopal.so.3.10.7 [ember-media] ember-media-0.7.0-1.fc19.noarch requires ember < 0:0.7.1 ember-media-0.7.0-1.fc19.noarch requires ember >= 0:0.7.0 [eog] eog-3.6.2-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) eog-3.6.2-1.fc18.armv7hl requires libjpeg.so.62 eog-3.6.2-1.fc18.armv7hl requires libgnome-desktop-3.so.4 [epiphany] 1:epiphany-3.6.1-2.fc18.armv7hl requires libgnome-desktop-3.so.4 [espresso] espresso-mpich2-3.0.2-4.fc18.armv7hl requires libmpich.so.3 [evince] evince-dvi-3.5.5-1.fc19.armv7hl requires libkpathsea.so.4 [evolution] evolution-3.6.2-3.fc18.armv7hl requires libgweather-3.so.1 evolution-3.6.2-3.fc18.armv7hl requires libgnome-desktop-3.so.4 evolution-bogofilter-3.6.2-3.fc18.armv7hl requires libgnome-desktop-3.so.4 evolution-devel-3.6.2-3.fc18.armv7hl requires evolution-data-server-devel >= 0:3.6.2 evolution-pst-3.6.2-3.fc18.armv7hl requires libgnome-desktop-3.so.4 evolution-spamassassin-3.6.2-3.fc18.armv7hl requires libgnome-desktop-3.so.4 [evolution-data-server] evolution-data-server-3.5.92-1.fc19.armv7hl requires libgweather-3.so.1 [evolution-ews] evolution-ews-3.6.1-1.fc18.armv7hl requires evolution-data-server >= 0:3.6.1 [evolution-mapi] evolution-mapi-3.6.2-1.fc18.armv7hl requires evolution-data-server >= 0:3.6.2 evolution-mapi-devel-3.6.2-1.fc18.armv7hl requires evolution-data-server-devel >= 0:3.6.2 [frama-c] frama-c-1.7-9.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 frama-c-1.7-9.fc19.armv7hl requires ocaml(SourceView2Enums) = 0:a4719464b5ba0296d71295f6b8478e70 frama-c-1.7-9.fc19.armv7hl requires ocaml(OgtkSourceView2Props) = 0:0f46098897daa6065ad3b1af5e474848 frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkTree) = 0:fbfcb4129253ccc61b07e95fc884b43b frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkSourceView2Props) = 0:cb78ac1a9caf077866c26a562b34fb5a frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkSignal) = 0:40cae66e85ec9d92363e99ab49ea8ce6 frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkPackProps) = 0:2815066310c90240e2f295efb031e008 frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkPack) = 0:f01c49a93091edd644dd3c81e82b670e frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkEnums) = 0:0c703e1dac4d056ea0bc450e99f597e5 frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkBaseProps) = 0:8ef17db6754fc20a7303c451a798c319 frama-c-1.7-9.fc19.armv7hl requires ocaml(GtkBase) = 0:95ebb1139c4ecb64afe71c2e024fa8b6 frama-c-1.7-9.fc19.armv7hl requires ocaml(Gobject) = 0:65f4b079004bddd8960117f8b7ba3b43 frama-c-1.7-9.fc19.armv7hl requires ocaml(Glib) = 0:0557158580d573c73e54a0e092bcdb6e frama-c-1.7-9.fc19.armv7hl requires ocaml(GdkEvent) = 0:a07cb442ac61635e8b9501a010e5737c frama-c-1.7-9.fc19.armv7hl requires ocaml(GdkEnums) = 0:6456774ccb10c2892915bca4512c4f6d frama-c-1.7-9.fc19.armv7hl requires ocaml(Gdk) = 0:2249830890d06ca283a90c548caec46f frama-c-1.7-9.fc19.armv7hl requires ocaml(GWindow) = 0:200762a6c68891da87d2caadc0ed4502 frama-c-1.7-9.fc19.armv7hl requires ocaml(GTree) = 0:ee57a7e3dd7ed82c73559ae42a488760 frama-c-1.7-9.fc19.armv7hl requires ocaml(GToolbox) = 0:3f8567efad59e19075dfdef5075d9b26 frama-c-1.7-9.fc19.armv7hl requires ocaml(GText) = 0:09abcc26d15d77bd9ab5923f4a0d9ce0 frama-c-1.7-9.fc19.armv7hl requires ocaml(GSourceView2) = 0:4c5b39cea6d2b5bcbe088c71de5ac0c7 frama-c-1.7-9.fc19.armv7hl requires ocaml(GRange) = 0:0bdc0491017d2255021a68128392bc5c frama-c-1.7-9.fc19.armv7hl requires ocaml(GPack) = 0:b98c2508aa5d5c1f2b5e55750d9efdae frama-c-1.7-9.fc19.armv7hl requires ocaml(GObj) = 0:54fb0d9be12943809e58ce2a201e8a5f frama-c-1.7-9.fc19.armv7hl requires ocaml(GMisc) = 0:50cafd209d922ed2beae7329392d77d3 frama-c-1.7-9.fc19.armv7hl requires ocaml(GMenu) = 0:d7b7921230cecd4cb87a245367dee540 frama-c-1.7-9.fc19.armv7hl requires ocaml(GList) = 0:11b5f38428ffd21158b5407824101b9e frama-c-1.7-9.fc19.armv7hl requires ocaml(GFile) = 0:5d6b251fb77c75c352d3095ba9fd7b97 frama-c-1.7-9.fc19.armv7hl requires ocaml(GEdit) = 0:e5ef8b0bb8e268c6550045985b2b1522 frama-c-1.7-9.fc19.armv7hl requires ocaml(GDraw) = 0:65c96e832a892d832d36d29aa186fc37 frama-c-1.7-9.fc19.armv7hl requires ocaml(GContainer) = 0:1cf49582a74c278b07a2283f28487d89 frama-c-1.7-9.fc19.armv7hl requires ocaml(GButton) = 0:bd9944f5965dbdb176266014b1c6eb58 frama-c-1.7-9.fc19.armv7hl requires ocaml(GBroken) = 0:80b4f54e859d301713a31114b904e60d frama-c-1.7-9.fc19.armv7hl requires ocaml(GBin) = 0:762daa4bcabc3cdff60a9960a151659e frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(StdLabels) = 0:d2c5c504aa4f47bc4ff5e379f4216635 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(SourceView2Enums) = 0:a4719464b5ba0296d71295f6b8478e70 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(OgtkSourceView2Props) = 0:0f46098897daa6065ad3b1af5e474848 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkText) = 0:bbba6ca7afaed7b789d2b545308039b7 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkSourceView2Props) = 0:cb78ac1a9caf077866c26a562b34fb5a frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkSignal) = 0:40cae66e85ec9d92363e99ab49ea8ce6 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkPackProps) = 0:2815066310c90240e2f295efb031e008 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkPack) = 0:f01c49a93091edd644dd3c81e82b670e frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkMain) = 0:136dceeebea50518bb23d5608f265036 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkEnums) = 0:0c703e1dac4d056ea0bc450e99f597e5 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkBaseProps) = 0:8ef17db6754fc20a7303c451a798c319 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GtkBase) = 0:95ebb1139c4ecb64afe71c2e024fa8b6 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(Gobject) = 0:65f4b079004bddd8960117f8b7ba3b43 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(Glib) = 0:0557158580d573c73e54a0e092bcdb6e frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GdkEvent) = 0:a07cb442ac61635e8b9501a010e5737c frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GdkEnums) = 0:6456774ccb10c2892915bca4512c4f6d frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(Gdk) = 0:2249830890d06ca283a90c548caec46f frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GWindow) = 0:200762a6c68891da87d2caadc0ed4502 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GTree) = 0:ee57a7e3dd7ed82c73559ae42a488760 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GToolbox) = 0:3f8567efad59e19075dfdef5075d9b26 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GText) = 0:09abcc26d15d77bd9ab5923f4a0d9ce0 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GSourceView2) = 0:4c5b39cea6d2b5bcbe088c71de5ac0c7 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GRange) = 0:0bdc0491017d2255021a68128392bc5c frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GPack) = 0:b98c2508aa5d5c1f2b5e55750d9efdae frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GObj) = 0:54fb0d9be12943809e58ce2a201e8a5f frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GMisc) = 0:50cafd209d922ed2beae7329392d77d3 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GMenu) = 0:d7b7921230cecd4cb87a245367dee540 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GList) = 0:11b5f38428ffd21158b5407824101b9e frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GFile) = 0:5d6b251fb77c75c352d3095ba9fd7b97 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GEdit) = 0:e5ef8b0bb8e268c6550045985b2b1522 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GDraw) = 0:65c96e832a892d832d36d29aa186fc37 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GContainer) = 0:1cf49582a74c278b07a2283f28487d89 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GButton) = 0:bd9944f5965dbdb176266014b1c6eb58 frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GBroken) = 0:80b4f54e859d301713a31114b904e60d frama-c-devel-1.7-9.fc19.armv7hl requires ocaml(GBin) = 0:762daa4bcabc3cdff60a9960a151659e [freeipa] freeipa-server-3.1.0-2.fc18.armv7hl requires krb5-server < 0:1.11 freeipa-server-strict-3.1.0-2.fc18.armv7hl requires krb5-server = 0:1.10.3 [freewrl] freewrl-1.22.13.1-3.fc18.armv7hl requires libjpeg.so.62 freewrl-1.22.13.1-3.fc18.armv7hl requires libGLEW.so.1.7 libEAI-1.22.13.1-3.fc18.armv7hl requires libjpeg.so.62 libEAI-1.22.13.1-3.fc18.armv7hl requires libGLEW.so.1.7 [gambas2] gambas2-gb-v4l-2.24.0-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gambas2-gb-v4l-2.24.0-3.fc18.armv7hl requires libjpeg.so.62 [gambas3] gambas3-gb-opengl-3.3.2-1.fc19.armv7hl requires libGLEW.so.1.7 gambas3-gb-opengl-glsl-3.3.2-1.fc19.armv7hl requires libGLEW.so.1.7 gambas3-gb-sdl-3.3.2-1.fc19.armv7hl requires libGLEW.so.1.7 gambas3-gb-v4l-3.3.2-1.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gambas3-gb-v4l-3.3.2-1.fc19.armv7hl requires libjpeg.so.62 [gappalib-coq] gappalib-coq-0.18.0-4.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 [gdal] gdal-1.9.1-14.fc18.armv7hl requires libwebp.so.2 gdal-1.9.1-14.fc18.armv7hl requires libjpeg.so.62 gdal-java-1.9.1-14.fc18.armv7hl requires libwebp.so.2 gdal-java-1.9.1-14.fc18.armv7hl requires libjpeg.so.62 gdal-libs-1.9.1-14.fc18.armv7hl requires libwebp.so.2 gdal-libs-1.9.1-14.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gdal-libs-1.9.1-14.fc18.armv7hl requires libjpeg.so.62 gdal-perl-1.9.1-14.fc18.armv7hl requires libwebp.so.2 gdal-perl-1.9.1-14.fc18.armv7hl requires libjpeg.so.62 gdal-ruby-1.9.1-14.fc18.armv7hl requires libwebp.so.2 gdal-ruby-1.9.1-14.fc18.armv7hl requires libjpeg.so.62 [gdb-heap] gdb-heap-0.5-10.fc18.armv7hl requires glibc(armv7hl-32) = 0:2.16 [geeqie] geeqie-1.1-1.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) geeqie-1.1-1.fc19.armv7hl requires libjpeg.so.62 [gegl] gegl-0.2.0-2.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gegl-0.2.0-2.fc18.armv7hl requires libjpeg.so.62 [ghc-blaze-builder-conduit] ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-blaze-builder-conduit-devel-0.4.0.2-3.fc18.armv7hl requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [ghc-wai-extra] ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(zlib-conduit-0.4.0.1-3ea276ab63a21b643b6b16bbb7d15db0) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(wai-1.2.0.2-4ef119d16429dd118fdb8f8fe5d95a11) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(text-0.11.1.13-0fafa88b8c349f02f033f955ed8e5450) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(resourcet-0.3.2.1-487979a99c0b1634b1faab2417e55313) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(conduit-0.4.1.1-445f14eaa0bd15f8394f3c3cd8c22933) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(blaze-builder-conduit-0.4.0.1-2bf092c4e6f8a03a980a62cd1cf57a97) ghc-wai-extra-devel-1.2.0.4-1.fc18.armv7hl requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-warp] ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(wai-0.4.3-c7e018d3a17422327676e6db7ee6214b) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(simple-sendfile-0.2.1-0e14a3eb9c52aac28e1260faf550afb2) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(network-2.3.0.11-dcc9b8a6d9649db45917aac14a31d530) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(http-types-0.6.10-1da40366e36003d89dac03331ebe9585) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(enumerator-0.4.18-f4fc4be158c65b36dfdffe4bc7341da4) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(case-insensitive-0.4.0.1-4f83c17ad203c8196a5cbff6f6934a8e) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(blaze-builder-enumerator-0.2.0.3-e19ec51d67a209312bc2e2ad87f6b9bd) ghc-warp-devel-0.4.6.3-3.fc18.armv7hl requires ghc-devel(blaze-builder-0.3.1.0-2bbf2a268f05ac890876dd9c56192ceb) [ghc-zlib-conduit] ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv7hl requires ghc-devel(transformers-0.2.2.0-f4e1b941e0825c00ee0acf24d73c8a87) ghc-zlib-conduit-devel-0.4.0.2-1.fc18.armv7hl requires ghc-devel(conduit-0.4.2-5f88c11b8a186be06897e40ef93e7de5) [gimp] 2:gimp-2.8.2-1.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 2:gimp-2.8.2-1.fc19.armv7hl requires libjpeg.so.62 [gnash] 1:gnash-0.8.10-4.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 1:gnash-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 1:gnash-cygnal-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 1:gnash-extension-dejagnu-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 1:gnash-extension-fileio-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 1:gnash-extension-lirc-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 1:gnash-extension-mysql-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 1:python-gnash-0.8.10-4.fc18.armv7hl requires libjpeg.so.62 [gnofract4d] gnofract4d-3.14-2.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gnofract4d-3.14-2.fc18.armv7hl requires libjpeg.so.62 [gnome-applets] 1:gnome-applets-3.5.92-3.fc18.armv7hl requires libgweather-3.so.1 [gnome-boxes] gnome-boxes-3.5.5-1.fc19.armv7hl requires libvirt-daemon-kvm gnome-boxes-3.5.5-1.fc19.armv7hl requires libcogl.so.9 [gnome-color-manager] gnome-color-manager-3.6.0-2.fc19.armv7hl requires libgnome-desktop-3.so.4 [gnome-contacts] gnome-contacts-3.6.2-1.fc18.armv7hl requires libgnome-desktop-3.so.4 [gnome-documents] gnome-documents-3.6.2-1.fc18.armv7hl requires libgnome-desktop-3.so.4 [gnome-font-viewer] gnome-font-viewer-3.6.2-1.fc18.armv7hl requires libgnome-desktop-3.so.4 [gnome-panel] gnome-panel-3.6.2-2.fc18.armv7hl requires libgweather-3.so.1 gnome-panel-3.6.2-2.fc18.armv7hl requires libgnome-desktop-3.so.4 gnome-panel-devel-3.6.2-2.fc18.armv7hl requires libgnome-desktop-3.so.4 [gnome-settings-daemon] gnome-settings-daemon-3.6.3-2.fc18.armv7hl requires libgnome-desktop-3.so.4 gnome-settings-daemon-devel-3.6.3-2.fc18.armv7hl requires libgnome-desktop-3.so.4 [gnome-shell] gnome-shell-3.6.2-6.fc18.armv7hl requires libgnome-desktop-3.so.4 [gnome-shell-extensions] gnome-shell-extension-common-3.7.4-1.fc19.noarch requires gnome-shell >= 0:3.7.4 [gnuplot] gnuplot-4.6.1-4.fc18.armv7hl requires libjpeg.so.62 gnuplot-minimal-4.6.1-4.fc18.armv7hl requires libjpeg.so.62 [gnustep-gui] gnustep-gui-0.22.0-3.fc18.armv7hl requires libjpeg.so.62 gnustep-gui-libs-0.22.0-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gnustep-gui-libs-0.22.0-3.fc18.armv7hl requires libjpeg.so.62 [gofer] ruby-gofer-0.75-1.fc19.noarch requires rubygem(qpid) >= 0:0.16.0 [gr-air-modes] gr-air-modes-0-0.7.20120905git6c7a7370.fc18.armv7hl requires libgruel-3.6.3rc0.so.0.0.0 gr-air-modes-0-0.7.20120905git6c7a7370.fc18.armv7hl requires libgnuradio-core-3.6.3rc0.so.0.0.0 [grads] grads-2.0.1-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) grads-2.0.1-3.fc18.armv7hl requires libjpeg.so.62 [grass] grass-6.4.2-4.fc18.armv7hl requires libgeos-3.3.2.so grass-libs-6.4.2-4.fc18.armv7hl requires libgeos-3.3.2.so [grilo-plugins] grilo-plugins-0.2.5-1.fc18.armv7hl requires grilo >= 0:0.2.4 [gstreamer-plugins-good] gstreamer-plugins-good-0.10.31-5.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gstreamer-plugins-good-0.10.31-5.fc18.armv7hl requires libjpeg.so.62 [gstreamer1-plugins-good] gstreamer1-plugins-good-1.0.4-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gstreamer1-plugins-good-1.0.4-1.fc18.armv7hl requires libjpeg.so.62 [gthumb] gthumb-3.0.2-3.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gthumb-3.0.2-3.fc19.armv7hl requires libjpeg.so.62 [gwenview] gwenview-4.9.5-1.fc18.armv7hl requires libkipi.so.9 gwenview-4.9.5-1.fc18.armv7hl requires kde-runtime >= 0:4.9.5 gwenview-libs-4.9.5-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gwenview-libs-4.9.5-1.fc18.armv7hl requires libjpeg.so.62 [gyachi] gyachi-1.2.11-4.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) gyachi-1.2.11-4.fc18.armv7hl requires libjpeg.so.62 [hplip] 1:hpijs-3.12.11-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 1:hpijs-3.12.11-1.fc18.armv7hl requires libjpeg.so.62 [hugin] hugin-2011.4.0-9.fc19.armv7hl requires libjpeg.so.62 hugin-2011.4.0-9.fc19.armv7hl requires libGLEW.so.1.7 hugin-base-2011.4.0-9.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) hugin-base-2011.4.0-9.fc19.armv7hl requires libjpeg.so.62 hugin-base-2011.4.0-9.fc19.armv7hl requires libGLEW.so.1.7 [imagefactory] imagefactory-1.1.1-1.fc17.noarch requires python-libguestfs imagefactory-1.1.1-1.fc17.noarch requires iwhd >= 0:1.2 [jaffl] jaffl-0.5.9-1.fc16.noarch requires jffi [jnr-ffi] jnr-ffi-0.5.10-3.fc17.noarch requires jffi [jnr-posix] jnr-posix-1.1.8-3.fc18.noarch requires jffi [jruby] jruby-1.6.3-3.fc17.noarch requires jffi >= 0:1.0.10 [kalzium] kalzium-4.9.5-1.fc18.armv7hl requires libGLEW.so.1.7 kalzium-4.9.5-1.fc18.armv7hl requires kde-runtime >= 0:4.9.5 kalzium-libs-4.9.5-1.fc18.armv7hl requires libkdeedu(armv7hl-32) >= 0:4.9.5 kalzium-libs-4.9.5-1.fc18.armv7hl requires libGLEW.so.1.7 [kcm-fcitx] kcm-fcitx-0.4.1-1.fc19.armv7hl requires kdebase-runtime >= 0:4.9.95 [kcm_wacomtablet] kcm_wacomtablet-1.3.7-2.fc18.armv7hl requires kdebase-runtime >= 0:4.9.3 [kde-baseapps] kde-baseapps-4.9.95-1.fc19.armv7hl requires kde-runtime >= 0:4.9.95 [kde-plasma-networkmanagement] 1:kde-plasma-networkmanagement-0.9.0.5-2.fc18.armv7hl requires kdebase-runtime >= 0:4.9.4 [kde-runtime] kde-runtime-libs-4.9.2-2.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) kde-runtime-libs-4.9.2-2.fc19.armv7hl requires libjpeg.so.62 [kde-workspace] kde-workspace-4.9.2-4.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) kde-workspace-4.9.2-4.fc19.armv7hl requires libjpeg.so.62 kdm-themes-4.9.2-4.fc19.noarch requires kde-wallpapers = 0:4.9.2 [kdeaccessibility] 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kmouth >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kmousetool >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kmag >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires kaccessible >= 0:4.9.97 1:kdeaccessibility-4.9.97-1.fc19.noarch requires jovie >= 0:4.9.97 [kdebindings] kdebindings-4.9.97-1.fc19.noarch requires smokeqt >= 0:4.9.97 kdebindings-4.9.97-1.fc19.noarch requires smokekde >= 0:4.9.97 kdebindings-devel-4.9.97-1.fc19.noarch requires smokeqt-devel >= 0:4.9.97 kdebindings-devel-4.9.97-1.fc19.noarch requires smokekde-devel >= 0:4.9.97 [kdeedu] kdeedu-4.9.97-1.fc19.noarch requires step >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires parley >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires pairs >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kwordquiz >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kturtle >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires ktouch >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires klettres >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kiten >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires khangman >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kgeography >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kanagram >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires kalzium >= 0:4.9.97 kdeedu-4.9.97-1.fc19.noarch requires blinken >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires rocs >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kmplot >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kig >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kbruch >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires kalgebra >= 0:4.9.97 kdeedu-math-4.9.97-1.fc19.noarch requires cantor >= 0:4.9.97 [kdegraphics] 7:kdegraphics-4.9.97-1.fc19.noarch requires svgpart >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires okular >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires ksnapshot >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires ksaneplugin >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kruler >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kolourpaint >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kgamma >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kdegraphics-thumbnailers >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kdegraphics-strigi-analyzer >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kdegraphics-mobipocket >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kcolorchooser >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires kamera >= 0:4.9.97 7:kdegraphics-4.9.97-1.fc19.noarch requires gwenview >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libksane >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libkipi >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libkexiv2 >= 0:4.9.97 7:kdegraphics-libs-4.9.97-1.fc19.noarch requires libkdcraw >= 0:4.9.97 [kdegraphics-mobipocket] kdegraphics-mobipocket-4.9.5-1.fc18.armv7hl requires okular-libs(armv7hl-32) >= 0:4.9.5 kdegraphics-mobipocket-4.9.5-1.fc18.armv7hl requires kde-runtime >= 0:4.9.5 [kdelibs3] kdelibs3-3.5.10-42.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) kdelibs3-3.5.10-42.fc18.armv7hl requires libjpeg.so.62 [kdemultimedia] 6:kdemultimedia-4.9.97-1.fc19.noarch requires kscd >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires kmix >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires juk >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires dragon >= 0:4.9.97 6:kdemultimedia-4.9.97-1.fc19.noarch requires audiocd-kio >= 0:4.9.97 6:kdemultimedia-libs-4.9.97-1.fc19.noarch requires libkcompactdisc >= 0:4.9.97 6:kdemultimedia-libs-4.9.97-1.fc19.noarch requires libkcddb >= 0:4.9.97 6:kdemultimedia-libs-4.9.97-1.fc19.noarch requires audiocd-kio-libs >= 0:4.9.97 [kdenetwork] 7:kdenetwork-kopete-4.9.2-1.fc19.armv7hl requires libjpeg.so.62 7:kdenetwork-kopete-libs-4.9.2-1.fc19.armv7hl requires libjpeg.so.62 7:kdenetwork-krdc-4.9.2-1.fc19.armv7hl requires libjpeg.so.62 7:kdenetwork-krfb-4.9.2-1.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 7:kdenetwork-krfb-4.9.2-1.fc19.armv7hl requires libjpeg.so.62 [kdeutils] 6:kdeutils-4.9.97-1.fc19.noarch requires sweeper >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires superkaramba >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires kremotecontrol >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires kfloppy >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires kcharselect >= 0:4.9.97 6:kdeutils-4.9.97-1.fc19.noarch requires filelight >= 1:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kwallet >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires ktimer >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kgpg >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kdf >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires kcalc >= 0:4.9.97 6:kdeutils-minimal-4.9.97-1.fc19.noarch requires ark >= 0:4.9.97 [kimono] kimono-4.9.5-1.fc18.armv7hl requires smokekde(armv7hl-32) >= 0:4.9.5 kimono-4.9.5-1.fc18.armv7hl requires qyoto(armv7hl-32) >= 0:4.9.5 kimono-akonadi-4.9.5-1.fc18.armv7hl requires smokekde-akonadi(armv7hl-32) >= 0:4.9.5 [kphotoalbum] kphotoalbum-4.3-1.fc18.armv7hl requires marble >= 1:4.9.4 kphotoalbum-4.3-1.fc18.armv7hl requires libkipi.so.9 kphotoalbum-4.3-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) kphotoalbum-4.3-1.fc18.armv7hl requires libjpeg.so.62 kphotoalbum-4.3-1.fc18.armv7hl requires kde-runtime >= 0:4.9.4 [krecipes] krecipes-2.0-0.1.beta2.fc18.armv7hl requires kde-runtime >= 0:4.9.3 [kscope] kscope-1.9.4-8.fc18.armv7hl requires libqscintilla2.so.8 [ktp-contact-applet] ktp-contact-applet-0.5.1-1.fc18.armv7hl requires kde-runtime >= 0:4.9.4 [ktp-text-ui] ktp-text-ui-0.5.0-1.fc19.armv7hl requires libtelepathy-logger.so.2 [leechcraft] leechcraft-popishu-0.5.80-1.fc18.armv7hl requires libqscintilla2.so.8 [lessjs] lessjs-1.3.1-4.fc19.noarch requires nodejs [libclaw] libclaw-1.7.0-5.fc17.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) libclaw-1.7.0-5.fc17.armv7hl requires libjpeg.so.62 [libfm] libfm-1.1.0-1.fc19.armv7hl requires libmenu-cache.so.1 libfm-gtk-1.1.0-1.fc19.armv7hl requires libmenu-cache.so.1 [libfreenect] libfreenect-opencv-0.1.2-2.fc19.armv7hl requires libopencv_nonfree.so.2.4 libfreenect-opencv-0.1.2-2.fc19.armv7hl requires libopencv_gpu.so.2.4 [libkdcraw] libkdcraw-4.9.1-1.fc19.armv7hl requires libjpeg.so.62 [librasterlite] librasterlite-1.1c-2.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) librasterlite-1.1c-2.fc19.armv7hl requires libjpeg.so.62 [libreoffice] 1:libreoffice-binfilter-3.6.3.2-8.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 1:libreoffice-binfilter-3.6.3.2-8.fc18.armv7hl requires libjpeg.so.62 1:libreoffice-core-3.6.3.2-8.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) 1:libreoffice-core-3.6.3.2-8.fc18.armv7hl requires libjpeg.so.62 1:libreoffice-core-3.6.3.2-8.fc18.armv7hl requires libexttextcat-1.0.so.0 1:libreoffice-core-3.6.3.2-8.fc18.armv7hl requires libcmis-0.2.so.2 [lightdm-kde] lightdm-kde-0.3.1-1.fc19.armv7hl requires kde-runtime >= 0:4.9.95 [liveusb-creator] liveusb-creator-3.11.7-2.fc18.noarch requires syslinux-extlinux liveusb-creator-3.11.7-2.fc18.noarch requires syslinux [lmms] lmms-0.4.13-3.fc18.armv7hl requires libstk.so.0 [lxlauncher] lxlauncher-0.2.1-12.fc18.armv7hl requires libmenu-cache.so.1 [lxpanel] lxpanel-0.5.10-2.fc18.armv7hl requires libmenu-cache.so.1 [mapserver] mapserver-6.0.3-6.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) mapserver-6.0.3-6.fc18.armv7hl requires libjpeg.so.62 mapserver-perl-6.0.3-6.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) mapserver-perl-6.0.3-6.fc18.armv7hl requires libjpeg.so.62 mapserver-python-6.0.3-6.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) mapserver-python-6.0.3-6.fc18.armv7hl requires libjpeg.so.62 php-mapserver-6.0.3-6.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) php-mapserver-6.0.3-6.fc18.armv7hl requires libjpeg.so.62 [mate-image-viewer] mate-image-viewer-1.5.0-2.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) mate-image-viewer-1.5.0-2.fc18.armv7hl requires libjpeg.so.62 [mathgl] mathgl-1.11.2-7.fc17.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) mathgl-1.11.2-7.fc17.armv7hl requires libjpeg.so.62 [mcollective-qpid-plugin] mcollective-qpid-plugin-1.1.2-1.fc19.noarch requires ruby-qpid-qmf [merkaartor] merkaartor-0.18.0-0.3.git654e49ba.fc17.armv7hl requires libexiv2.so.11 [minetest] minetest-0.3.1-11.fc18.armv7hl requires libjpeg.so.62 [mod_security_crs] mod_security_crs-2.2.6-4.fc19.noarch requires mod_security >= 0:2.7.0 [monkeystudio] monkeystudio-1.9.0.2-2.20120501svn4458.fc18.armv7hl requires libqscintilla2.so.8 [mpi4py] mpi4py-mpich2-1.3-5.fc18.armv7hl requires libmpich.so.3 python3-mpi4py-mpich2-1.3-5.fc18.armv7hl requires libmpich.so.3 [mygui] mygui-3.2.0-2.fc19.armv7hl requires libCommon.so mygui-demos-3.2.0-2.fc19.armv7hl requires libCommon.so mygui-tools-3.2.0-2.fc19.armv7hl requires libCommon.so [nagios] nagios-3.4.3-3.fc18.armv7hl requires libjpeg.so.62 [nautilus] nautilus-3.6.3-4.fc18.armv7hl requires libgnome-desktop-3.so.4 [nautilus-open-terminal] nautilus-open-terminal-0.19-6.fc18.armv7hl requires libgnome-desktop-3.so.4 [ncl] ncl-6.0.0-7.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ncl-6.0.0-7.fc18.armv7hl requires libjpeg.so.62 [netcdf-cxx4] netcdf-cxx4-mpich2-4.2-6.fc18.armv7hl requires libmpichcxx.so.3 netcdf-cxx4-mpich2-4.2-6.fc18.armv7hl requires libmpich.so.3 [nfsometer] nfsometer-1.3-1.fc19.noarch requires filebench [nip2] nip2-7.28.5-1.fc18.armv7hl requires libjpeg.so.62 [node-gyp] node-gyp-0.8.2-3.fc19.noarch requires npm(semver) < 0:2 node-gyp-0.8.2-3.fc19.noarch requires npm(semver) >= 0:1 node-gyp-0.8.2-3.fc19.noarch requires npm(request) node-gyp-0.8.2-3.fc19.noarch requires nodejs-devel node-gyp-0.8.2-3.fc19.noarch requires nodejs(engine) >= 0:0.6.0 [nodejs-abbrev] nodejs-abbrev-1.0.4-2.fc19.noarch requires nodejs(engine) [nodejs-ansi] nodejs-ansi-0.1.2-4.fc19.noarch requires nodejs(engine) [nodejs-archy] nodejs-archy-0.0.2-5.fc19.noarch requires nodejs(engine) [nodejs-async] nodejs-async-0.1.22-3.fc19.noarch requires nodejs(engine) [nodejs-block-stream] nodejs-block-stream-0.0.6-4.fc19.noarch requires nodejs(engine) [nodejs-charm] nodejs-charm-0.1.0-1.fc19.noarch requires nodejs(engine) [nodejs-chownr] nodejs-chownr-0.0.1-6.fc19.noarch requires nodejs(engine) [nodejs-config-chain] nodejs-config-chain-1.1.3-3.fc19.noarch requires nodejs(engine) [nodejs-couch-login] nodejs-couch-login-0.1.15-2.fc19.noarch requires npm(request) nodejs-couch-login-0.1.15-2.fc19.noarch requires nodejs(engine) [nodejs-delayed-stream] nodejs-delayed-stream-0.0.5-2.fc19.noarch requires nodejs(engine) >= 0:0.4.0 [nodejs-form-data] nodejs-form-data-0.0.6-2.fc19.noarch requires npm(combined-stream) = 0:0.0.3 nodejs-form-data-0.0.6-2.fc19.noarch requires nodejs(engine) [nodejs-fstream] nodejs-fstream-0.1.21-3.fc19.noarch requires nodejs(engine) >= 0:0.6 [nodejs-fstream-npm] nodejs-fstream-npm-0.1.3-2.fc19.noarch requires npm(fstream-ignore) < 0:0.1 nodejs-fstream-npm-0.1.3-2.fc19.noarch requires npm(fstream-ignore) >= 0:0.0.5 nodejs-fstream-npm-0.1.3-2.fc19.noarch requires nodejs(engine) [nodejs-glob] nodejs-glob-3.1.14-2.fc19.noarch requires nodejs(engine) [nodejs-graceful-fs] nodejs-graceful-fs-1.1.14-2.fc19.noarch requires nodejs(engine) >= 0:0.4.0 [nodejs-inherits] nodejs-inherits-1.0.0-6.fc19.noarch requires nodejs(engine) [nodejs-ini] nodejs-ini-1.0.5-2.fc19.noarch requires nodejs(engine) [nodejs-init-package-json] nodejs-init-package-json-0.0.7-3.fc19.noarch requires npm(semver) < 0:2 nodejs-init-package-json-0.0.7-3.fc19.noarch requires npm(semver) >= 0:1 nodejs-init-package-json-0.0.7-3.fc19.noarch requires nodejs(engine) [nodejs-lockfile] nodejs-lockfile-0.2.1-2.fc19.noarch requires nodejs(engine) [nodejs-lru-cache] nodejs-lru-cache-2.2.1-2.fc19.noarch requires nodejs(engine) [nodejs-mime] nodejs-mime-1.2.7-2.fc19.noarch requires nodejs(engine) [nodejs-minimatch] nodejs-minimatch-0.2.9-2.fc19.noarch requires nodejs(engine) [nodejs-mkdirp] nodejs-mkdirp-0.3.4-2.fc19.noarch requires nodejs(engine) [nodejs-mute-stream] nodejs-mute-stream-0.0.3-3.fc19.noarch requires nodejs(engine) [nodejs-nopt] nodejs-nopt-2.0.0-3.fc19.noarch requires nodejs(engine) [nodejs-npm-registry-client] nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires npm(semver) < 0:1.2 nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires npm(semver) >= 0:1.1.0 nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires npm(request) nodejs-npm-registry-client-0.2.11-2.fc19.noarch requires nodejs(engine) [nodejs-npmconf] nodejs-npmconf-0.0.16-3.fc19.noarch requires nodejs(engine) [nodejs-npmlog] nodejs-npmlog-0.0.2-2.fc19.noarch requires nodejs(engine) [nodejs-once] nodejs-once-1.1.1-2.fc19.noarch requires nodejs(engine) [nodejs-opts] nodejs-opts-1.2.2-2.fc19.noarch requires nodejs(engine) >= 0:0.1.90 [nodejs-osenv] nodejs-osenv-0.0.3-2.fc19.noarch requires nodejs(engine) [nodejs-promzard] nodejs-promzard-0.2.0-3.fc19.noarch requires nodejs(engine) [nodejs-proto-list] nodejs-proto-list-1.2.2-2.fc19.noarch requires nodejs(engine) [nodejs-read] nodejs-read-1.0.4-4.fc19.noarch requires nodejs(engine) >= 0:0.8 [nodejs-read-installed] nodejs-read-installed-0.0.4-2.fc19.noarch requires npm(semver) < 0:2 nodejs-read-installed-0.0.4-2.fc19.noarch requires npm(semver) >= 0:1 nodejs-read-installed-0.0.4-2.fc19.noarch requires nodejs(engine) [nodejs-read-package-json] nodejs-read-package-json-0.1.12-2.fc19.noarch requires npm(semver) < 0:2 nodejs-read-package-json-0.1.12-2.fc19.noarch requires npm(semver) >= 0:1 nodejs-read-package-json-0.1.12-2.fc19.noarch requires nodejs(engine) [nodejs-retry] nodejs-retry-0.6.0-2.fc19.noarch requires nodejs(engine) [nodejs-rimraf] nodejs-rimraf-2.1.1-2.fc19.noarch requires nodejs(engine) [nodejs-sigmund] nodejs-sigmund-1.0.0-2.fc19.noarch requires nodejs(engine) [nodejs-slide] nodejs-slide-1.1.3-4.fc19.noarch requires nodejs(engine) [nodejs-tar] nodejs-tar-0.1.14-3.fc19.noarch requires nodejs(engine) [nodejs-uid-number] nodejs-uid-number-0.0.3-4.fc19.noarch requires nodejs(engine) [nodejs-which] nodejs-which-1.0.5-4.fc19.noarch requires nodejs(engine) [nodejs-yamlish] nodejs-yamlish-0.0.5-1.fc19.noarch requires nodejs(engine) [nut] nut-cgi-2.6.5-6.fc19.armv7hl requires libjpeg.so.62 [ocaml-camlimages] ocaml-camlimages-4.0.1-7.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ocaml-camlimages-4.0.1-7.fc18.armv7hl requires libjpeg.so.62 [ocaml-libvirt] ocaml-libvirt-0.6.1.2-5.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 [ocaml-xml-light] ocaml-xml-light-2.3-0.1.svn234.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 [octave] 6:octave-3.6.3-2.fc19.armv7hl requires libcxsparse.so.2 6:octave-3.6.3-2.fc19.armv7hl requires libcholmod.so.1 6:octave-3.6.3-2.fc19.armv7hl requires libGraphicsMagick.so.3 6:octave-3.6.3-2.fc19.armv7hl requires libGraphicsMagick++.so.3 6:octave-3.6.3-2.fc19.armv7hl requires hdf5 = 0:1.8.9 [okular] okular-part-4.9.2-1.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) okular-part-4.9.2-1.fc19.armv7hl requires libjpeg.so.62 [opencv] opencv-2.4.3-3.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) opencv-2.4.3-3.fc18.armv7hl requires libjpeg.so.62 [openlierox] openlierox-0.57-0.16.beta8.fc15.armv7hl requires libzip.so.1 [openpts] openpts-0.2.6-5.fc19.armv7hl requires tboot [openscad] openscad-2013.01.08-1.fc18.armv7hl requires libGLEW.so.1.7 [openshift-origin-broker] openshift-origin-broker-1.1.1-2.fc19.noarch requires mongodb-server [openstack-nova] openstack-nova-compute-2013.1-0.3.g1.fc19.noarch requires qemu-kvm openstack-nova-compute-2013.1-0.3.g1.fc19.noarch requires python-libguestfs [osm2pgsql] osm2pgsql-0.70.5-0.9.20121021svn.fc18.armv7hl requires libgeos-3.3.2.so [ovirt-node] ovirt-node-2.5.1-1.fc19.noarch requires grub2 [oz] oz-0.9.0-1.fc19.noarch requires python-libguestfs [pandoc] ghc-pandoc-devel-1.9.4.2-5.fc19.armv7hl requires ghc-devel(citeproc-hs-0.3.4-52860e1ffa82c88d0e3315516bf87ffd) [perl-GD] perl-GD-2.44-12.fc18.armv7hl requires libjpeg.so.62 [perl-Language-Prolog-Yaswi] perl-Language-Prolog-Yaswi-0.21-6.fc19.armv7hl requires libswipl.so.6.2.2 [perl-MongoDB] perl-MongoDB-0.41-3.fc15.armv7hl requires perl(:MODULE_COMPAT_5.12.4) [petitboot] petitboot-0.2-7.fc17.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) petitboot-0.2-7.fc17.armv7hl requires libjpeg.so.62 [pharosc] pharosc-xcircuit-8.3-6.fc18.noarch requires xcircuit [photoprint] photoprint-0.4.2-0.8.pre2.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) photoprint-0.4.2-0.8.pre2.fc18.armv7hl requires libjpeg.so.62 [php-pecl-gearman] php-pecl-gearman-1.0.2-1.fc18.armv7hl requires libgearman.so.6 [plasma-mobile] plasma-mobile-0.4-1.fc18.armv7hl requires kde-workspace >= 0:4.9.4 [ppl] ppl-java-1.0-3.fc19.3.armv7hl requires jpackage-utils(armv7hl-32) ppl-java-1.0-3.fc19.3.armv7hl requires java(armv7hl-32) >= 1:1.6.0 ppl-java-javadoc-1.0-3.fc19.3.armv7hl requires jpackage-utils(armv7hl-32) [pygame] pygame-1.9.1-11.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) pygame-1.9.1-11.fc18.armv7hl requires libjpeg.so.62 [pyicq-t] pyicq-t-0.8.1.5-16.fc19.noarch requires python-pillow [pypar] pypar-mpich2-2.1.4_94-7.fc18.armv7hl requires libmpich.so.3 [python-basemap] python-basemap-0.99.4-14.fc18.armv7hl requires libgeos-3.3.2.so [qlandkartegt] qlandkartegt-1.4.0-2.fc17.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) qlandkartegt-1.4.0-2.fc17.armv7hl requires libjpeg.so.62 [quake3] quake3-1.36-14.svn2102.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) quake3-1.36-14.svn2102.fc18.armv7hl requires libjpeg.so.62 [qyoto] qyoto-4.9.2-1.fc19.armv7hl requires libqscintilla2.so.8 [rakudo-star] rakudo-star-0.0.2011.07_3.6.0-5.fc18.1.armv7hl requires libparrot.so.3.6.0 [rekonq] rekonq-2.0-1.fc19.armv7hl requires kde-runtime >= 0:4.9.95 [remmina] remmina-plugins-vnc-1.0.0-5.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) remmina-plugins-vnc-1.0.0-5.fc18.armv7hl requires libjpeg.so.62 [rootplot] rootplot-2.2.1-6.fc18.noarch requires root-python [rosa-launcher] rosa-launcher-2.0.0-1.fc19.armv7hl requires kdebase-runtime >= 0:4.9.95 [ruby-korundum] ruby-korundum-4.9.5-1.fc18.armv7hl requires smokekde(armv7hl-32) >= 0:4.9.5 ruby-korundum-4.9.5-1.fc18.armv7hl requires ruby-qt(armv7hl-32) >= 0:4.9.5 ruby-korundum-akonadi-4.9.5-1.fc18.armv7hl requires smokekde-akonadi(armv7hl-32) >= 0:4.9.5 [ruby-qt] ruby-qt-4.9.2-1.fc19.armv7hl requires libqscintilla2.so.8 [ruby-spqr] ruby-spqr-0.3.6-3.fc18.noarch requires ruby-qmf [rubygem-RedCloth] rubygem-RedCloth-4.2.3-3.fc17.armv7hl requires ruby(abi) = 0:1.8 rubygem-RedCloth-4.2.3-3.fc17.armv7hl requires libruby.so.1.8 [rubygem-boxgrinder-build] rubygem-boxgrinder-build-0.10.4-1.fc19.noarch requires ruby-libguestfs [rubygem-childprocess] rubygem-childprocess-0.3.6-1.fc19.noarch requires rubygem(ffi) < 0:1.1 rubygem-childprocess-0.3.6-1.fc19.noarch requires rubygem(ffi) >= 0:1.0.6 [rubygem-net-ping] rubygem-net-ping-1.5.3-6.fc19.noarch requires rubygem(net-ldap) < 0:0.3 rubygem-net-ping-1.5.3-6.fc19.noarch requires rubygem(ffi) >= 0:1.0.0 [rubygem-openshift-origin-msg-broker-mcollective] rubygem-openshift-origin-msg-broker-mcollective-1.2.7-2.fc19.noarch requires ruby-qpid-qmf rubygem-openshift-origin-msg-broker-mcollective-1.2.7-2.fc19.noarch requires qpid-cpp-server rubygem-openshift-origin-msg-broker-mcollective-1.2.7-2.fc19.noarch requires qpid-cpp-client [rubygem-rb-inotify] rubygem-rb-inotify-0.8.8-1.fc18.noarch requires rubygem(ffi) [rubygem-selenium-webdriver] rubygem-selenium-webdriver-2.3.2-4.fc18.noarch requires rubygem(ffi) >= 0:1.0.7 [scala] scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library) [scirenderer] scirenderer-1.0.2-4.fc19.noarch requires jogl2 [scotch] scotch-5.1.11-3.fc18.armv7hl requires libmpich.so.3 [seamonkey] seamonkey-2.13.2-2.fc18.armv7hl requires libjpeg.so.62 [sear] sear-0.6.4-0.9.g0b70ddb.fc18.armv7hl requires libwfmath-0.3.so.6 sear-0.6.4-0.9.g0b70ddb.fc18.armv7hl requires libvarconf-1.0.so.7 sear-0.6.4-0.9.g0b70ddb.fc18.armv7hl requires libskstream-0.3.so.6 sear-0.6.4-0.9.g0b70ddb.fc18.armv7hl requires libmercator-0.3.so.1 sear-0.6.4-0.9.g0b70ddb.fc18.armv7hl requires libjpeg.so.62 sear-0.6.4-0.9.g0b70ddb.fc18.armv7hl requires liberis-1.3.so.19 [smb4k] smb4k-1.0.5-1.fc19.armv7hl requires kdebase-runtime >= 0:4.9.95 [smokeqt] smokeqt-4.9.2-1.fc19.armv7hl requires libqscintilla2.so.8 [spacewalk-web] spacewalk-dobby-1.8.49-1.fc19.noarch requires perl(Spacewalk::Setup) [speed-dreams] speed-dreams-2.1.0-11.trunk_r4810.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) speed-dreams-2.1.0-11.trunk_r4810.fc19.armv7hl requires libjpeg.so.62 [spice-gtk] spice-glib-0.12.101-1.fc19.armv7hl requires libusbredirparser.so.0 spice-glib-0.12.101-1.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) spice-glib-0.12.101-1.fc19.armv7hl requires libjpeg.so.62 spice-gtk-0.12.101-1.fc19.armv7hl requires libusbredirparser.so.0 spice-gtk-0.12.101-1.fc19.armv7hl requires libjpeg.so.62 spice-gtk-python-0.12.101-1.fc19.armv7hl requires libusbredirparser.so.0 spice-gtk-python-0.12.101-1.fc19.armv7hl requires libjpeg.so.62 spice-gtk-tools-0.12.101-1.fc19.armv7hl requires libusbredirparser.so.0 spice-gtk-tools-0.12.101-1.fc19.armv7hl requires libjpeg.so.62 spice-gtk3-0.12.101-1.fc19.armv7hl requires libusbredirparser.so.0 spice-gtk3-0.12.101-1.fc19.armv7hl requires libjpeg.so.62 [spring-installer] ca-installer-20090316-12.fc18.armv7hl requires spring spring-installer-20090316-12.fc18.armv7hl requires spring [spring-maps-default] spring-maps-default-0.1-9.fc18.noarch requires spring [springlobby] springlobby-0.147-1.fc19.armv7hl requires spring [sssd] sssd-1.9.3-1.fc18.armv7hl requires libldb(armv7hl-32) = 0:1.1.13 [supertuxkart] supertuxkart-0.7.3-2.fc19.armv7hl requires libIrrlicht18.so.1 supertuxkart-0.7.3-2.fc19.armv7hl requires libIrrXML18.so.1 [synce-gnome] synce-gnome-0.11-7.fc18.noarch requires odccm [synce-kpm] synce-kpm-0.15.1-3.fc18.noarch requires odccm [telepathy-logger-qt] telepathy-logger-qt-0.5.0-1.fc19.armv7hl requires libtelepathy-logger.so.2 [tex-musixtex] tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf [thermostat] thermostat-0.4.0-3.fc18.armv7hl requires mongodb-server thermostat-0.4.0-3.fc18.armv7hl requires mongodb [tomahawk] tomahawk-0.4.2-1.fc18.armv7hl requires libechonest.so.1.2 tomahawk-0.4.2-1.fc18.armv7hl requires libattica.so.0.3 [tracker] tracker-0.14.2-4.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) tracker-0.14.2-4.fc19.armv7hl requires libjpeg.so.62 [ufraw] ufraw-0.18-14.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ufraw-0.18-14.fc19.armv7hl requires libjpeg.so.62 ufraw-cinepaint-0.18-14.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ufraw-cinepaint-0.18-14.fc19.armv7hl requires libjpeg.so.62 ufraw-gimp-0.18-14.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) ufraw-gimp-0.18-14.fc19.armv7hl requires libjpeg.so.62 [usb_modeswitch-data] usb_modeswitch-data-20121109-1.fc19.noarch requires usb_modeswitch >= 0:1.2.5 [vdrift] vdrift-20120722-1.fc18.armv7hl requires libGLEW.so.1.7 [vdsm] vdsm-4.10.0-11.fc18.armv7hl requires qemu-kvm >= 2:0.15.0-4 vdsm-4.10.0-11.fc18.armv7hl requires dmidecode [vegastrike-data] vegastrike-data-0.5.1-2.r1.fc18.noarch requires vegastrike >= 0:0.5.1 [vigra] vigra-1.8.0-6.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) vigra-1.8.0-6.fc18.armv7hl requires libjpeg.so.62 vigra-python-1.8.0-6.fc18.armv7hl requires libjpeg.so.62 [vips] vips-7.28.5-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) vips-7.28.5-1.fc18.armv7hl requires libjpeg.so.62 vips-python-7.28.5-1.fc18.armv7hl requires libjpeg.so.62 vips-tools-7.28.5-1.fc18.armv7hl requires libjpeg.so.62 [vtk] vtk-examples-5.10.1-2.fc19.armv7hl requires vtkdata = 0:5.10.1 vtk-testing-5.10.1-2.fc19.armv7hl requires vtkdata = 0:5.10.1 [wallaby] python-wallaby-0.16.0-1.fc18.noarch requires python-qpid-qmf ruby-wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-http-server-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 wallaby-utils-0.16.0-1.fc18.noarch requires ruby-qmf >= 0:0.7.929717 [warzone2100] warzone2100-3.1-0.9.rc2.fc19.armv7hl requires libGLEW.so.1.7 [webkitgtk3] webkitgtk3-1.10.2-1.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) webkitgtk3-1.10.2-1.fc18.armv7hl requires libjpeg.so.62 [weka] weka-3.6.8-1.fc19.noarch requires javasqlite [whenjobs] whenjobs-0.7.3-3.fc19.armv7hl requires ocaml(runtime) = 0:4.00.0 [wxMaxima] wxMaxima-12.09.0-1.fc18.armv7hl requires maxima >= 0:5.20 [xemacs-packages-base] xemacs-packages-base-20121228-1.fc19.noarch requires xemacs(bin) >= 0:21.5.33 [xine-ui] xine-ui-0.99.7-2.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) xine-ui-0.99.7-2.fc19.armv7hl requires libjpeg.so.62 [xorg-x11-drivers] xorg-x11-drivers-7.7-1.fc19.armv7hl requires xorg-x11-drv-nv [xorg-x11-drv-apm] xorg-x11-drv-apm-1.2.5-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-apm-1.2.5-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-ast] xorg-x11-drv-ast-0.97.0-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-ast-0.97.0-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-ati] xorg-x11-drv-ati-7.0.0-0.8.20121015gitbd9e2c064.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-ati-7.0.0-0.8.20121015gitbd9e2c064.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-cirrus] xorg-x11-drv-cirrus-1.5.1-3.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-cirrus-1.5.1-3.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-dummy] xorg-x11-drv-dummy-0.3.6-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-dummy-0.3.6-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-evdev] xorg-x11-drv-evdev-2.7.3-1.fc19.armv7hl requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-evdev-2.7.3-1.fc19.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-fbdev] xorg-x11-drv-fbdev-0.4.3-3.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-fbdev-0.4.3-3.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-glint] xorg-x11-drv-glint-1.2.8-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-glint-1.2.8-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-i128] xorg-x11-drv-i128-1.3.6-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-i128-1.3.6-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-i740] xorg-x11-drv-i740-1.3.4-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-i740-1.3.4-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-ivtv] xorg-x11-drv-ivtv-1.2.0-0.1.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-ivtv-1.2.0-0.1.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-keyboard] xorg-x11-drv-keyboard-1.6.2-3.fc18.armv7hl requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-keyboard-1.6.2-3.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-mach64] xorg-x11-drv-mach64-6.9.3-6.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-mach64-6.9.3-6.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-mga] xorg-x11-drv-mga-1.6.1-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-mga-1.6.1-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-modesetting] xorg-x11-drv-modesetting-0.4.0-4.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-modesetting-0.4.0-4.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-mouse] xorg-x11-drv-mouse-1.8.1-3.fc18.armv7hl requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-mouse-1.8.1-3.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-nouveau] 1:xorg-x11-drv-nouveau-1.0.2-1.fc19.armv7hl requires xserver-abi(videodrv-13) >= 0:0 1:xorg-x11-drv-nouveau-1.0.2-1.fc19.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-qxl] xorg-x11-drv-qxl-0.0.22-5.20120718gitde6620788.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-qxl-0.0.22-5.20120718gitde6620788.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-r128] xorg-x11-drv-r128-6.9.1-1.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-r128-6.9.1-1.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-rendition] xorg-x11-drv-rendition-4.2.5-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-rendition-4.2.5-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-s3virge] xorg-x11-drv-s3virge-1.10.6-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-s3virge-1.10.6-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-savage] xorg-x11-drv-savage-2.3.6-4.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-savage-2.3.6-4.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-siliconmotion] xorg-x11-drv-siliconmotion-1.7.7-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-siliconmotion-1.7.7-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-sis] xorg-x11-drv-sis-0.10.7-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-sis-0.10.7-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-sisusb] xorg-x11-drv-sisusb-0.9.6-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-sisusb-0.9.6-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-synaptics] xorg-x11-drv-synaptics-1.6.2-6.fc19.armv7hl requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-synaptics-1.6.2-6.fc19.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-tdfx] xorg-x11-drv-tdfx-1.4.5-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-tdfx-1.4.5-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-trident] xorg-x11-drv-trident-1.3.6-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-trident-1.3.6-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-v4l] xorg-x11-drv-v4l-0.2.0-23.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-v4l-0.2.0-23.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-vesa] xorg-x11-drv-vesa-2.3.2-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-vesa-2.3.2-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-void] xorg-x11-drv-void-1.4.0-12.fc18.armv7hl requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-void-1.4.0-12.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-voodoo] xorg-x11-drv-voodoo-1.2.5-2.fc18.armv7hl requires xserver-abi(videodrv-13) >= 0:0 xorg-x11-drv-voodoo-1.2.5-2.fc18.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xorg-x11-drv-wacom] xorg-x11-drv-wacom-0.17.0-1.fc19.armv7hl requires xserver-abi(xinput-18) >= 0:0 xorg-x11-drv-wacom-0.17.0-1.fc19.armv7hl requires xserver-abi(ansic-0) >= 0:4 [xsane] xsane-0.998-12.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) xsane-0.998-12.fc19.armv7hl requires libjpeg.so.62 xsane-gimp-0.998-12.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) xsane-gimp-0.998-12.fc19.armv7hl requires libjpeg.so.62 [yelp] 1:yelp-3.6.2-1.fc18.armv7hl requires yelp-xsl [yelp-tools] yelp-tools-3.6.1-1.fc18.noarch requires yelp-xsl [zbar] zbar-0.10-11.fc18.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) zbar-0.10-11.fc18.armv7hl requires libjpeg.so.62 zbar-gtk-0.10-11.fc18.armv7hl requires libjpeg.so.62 zbar-pygtk-0.10-11.fc18.armv7hl requires libjpeg.so.62 zbar-qt-0.10-11.fc18.armv7hl requires libjpeg.so.62 [zoneminder] zoneminder-1.25.0-9.fc19.armv7hl requires libjpeg.so.62(LIBJPEG_6.2) zoneminder-1.25.0-9.fc19.armv7hl requires libjpeg.so.62 New package: node-gyp-0.8.2-3.fc19 Node.js native addon build tool New package: nodejs-tar-0.1.14-3.fc19 Tar for Node.js New package: zathura-djvu-0.2.1-2.fc18 DjVu support for zathura Updated Packages: 389-admin-1.1.31-1.fc18.1 ------------------------- * Wed Jan 16 2013 Noriko Hosoi <nhosoi(a)redhat.com> - 1.1.31-1 - bump version to 1.1.30 - Ticket #476 - 389 ds do not start on F18 due to missing modules - Ticket #293 - remove-ds-admin.pl does not remove everything - Ticket 400 - BIND operation result not checked properly in admin server - Ticket 401 - Console login fails with anonymous access disabled BackupPC-3.2.1-10.fc19 ---------------------- SimplyHTML-0.16.5-1.fc19 ------------------------ * Sat Jan 19 2013 Johannes Lips <hannes(a)fedoraproject.org> 0.16.5-1 - update to latest upstream version asm2-2.2.3-12.fc19 ------------------ * Tue Jan 22 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 0:2.2.3-12 - Install versioned POMs instead of versionless * Tue Jan 22 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 0:2.2.3-11 - Remove versionless jar symlinks - Resolves: rhbz#896512 binutils-2.23.51.0.8-4.fc19 --------------------------- * Mon Jan 21 2013 Nick Clifton <nickc(a)redhat.com> - 2.23.51.0.8-4 - Allow more whitespace in ARM instructions. (#892261) * Tue Jan 15 2013 Patsy Franklin <pfrankli(a)redhat.com> - 2.23.51.0.8-3 - Add bc to BuildRequires when running the testsuite. (#895321) * Wed Jan 02 2013 Nick Clifton <nickc(a)redhat.com> - 2.23.51.0.8-2 - Add runtime link with libdl. (#889134) * Wed Jan 02 2013 Nick Clifton <nickc(a)redhat.com> - 2.23.51.0.8-1 - Rebase on 2.23.51.0.8 release. (#890382) dnf-0.2.20-1.gitdec970f.fc19 ---------------------------- * Fri Jan 18 2013 Aleš Kozumplík <ales(a)redhat.com> - 0.2.20-1.gitdec970f - fix '--exclude' command-line option (related RhBug:871892) - Introduce --best switch to force trying latest packages in transactions ( RhBug:882211) - fix '--disablerepo' (related RhBug:871892) - Tell RPM it's OK to downgrade during dist-sync (RhBug:894339) - 'dnf install' should skip already installed packages and say so. (RhBug:882851) eclipse-jbosstools-4.0.0-1.fc19 ------------------------------- * Tue Oct 16 2012 Gerard Ryan <galileo(a)fedoraproject.org> - 4.0.0-1 - Update to upstream 4.0.0.Final - Add script create-tarball.sh to create source tarball from Git. - Update locations for symlinked jars and POM macros. - Remove unnecessary pom macros. fedmsg-notify-0.4.0-2.fc19 -------------------------- * Sat Jan 19 2013 Luke Macken <lmacken(a)redhat.com> - 0.4.0-2 - Require python-fedora for the PackageDB client fetchmail-6.3.24-1.fc19 ----------------------- * Mon Jan 07 2013 Vitezslav Crhonek <vcrhonek(a)redhat.com> - 6.3.24-1 - Update to fetchmail-6.3.24 * Tue Dec 11 2012 Vitezslav Crhonek <vcrhonek(a)redhat.com> - 6.3.23-1 - Update to fetchmail-6.3.23 gjs-1.35.3-1.fc19 ----------------- * Thu Dec 20 2012 Kalev Lember <kalevlember(a)gmail.com> - 1.35.3-1 - Update to 1.35.3 gnome-screensaver-3.6.1-2.fc19 ------------------------------ * Fri Dec 21 2012 Kalev Lember <kalevlember(a)gmail.com> - 3.6.1-2 - Rebuilt for libgnome-desktop-3 3.7.3 soname bump kamoso-2.0.2-9.fc19 ------------------- * Fri Dec 21 2012 Rex Dieter <rdieter(a)fedoraproject.org> 2.0.2-9 - fix build for older libkipi * Fri Dec 21 2012 Rex Dieter <rdieter(a)fedoraproject.org> 2.0.2-8 - Kamoso has a missing icon for the pictures button (848079) - pull in upstream fix for broken about dialog * Wed Nov 21 2012 Rex Dieter <rdieter(a)fedoraproject.org> 2.0.2-7 - fix build against libkipi-4.9.50+ (kde#307147) kbibtex-0.4.1-1.fc19 -------------------- libquvi-scripts-0.4.10-1.fc19 ----------------------------- * Fri Jan 18 2013 Nicoleau Fabien <nicoleau.fabien(a)gmail.com> 0.4.10-1 - Update to 0.4.10 mate-screensaver-1.5.1-2.fc19 ----------------------------- * Fri Dec 21 2012 Nelson Marques <nmo.marques(a)gmail.com> - 1.5.1-3 - Add missing dependencies for proper build and conditionals for using systemd or CK dependending on version. - Rework %configure * Wed Dec 05 2012 Nelson Marques <nmo.marques(a)gmail.com> - 1.5.1-2 * add mate-screensaver-1.5.1-only_allow_one_instance.patch: fix double password prompt when returning from hibernate/suspend. Only allow one instance per user. maven-dependency-analyzer-1.3-4.fc19 ------------------------------------ * Tue Jan 22 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 1.3-4 - Replace asm2 R with objectweb-asm - Resolves: rhbz#902641 mingw-libarchive-3.1.1-1.fc19 ----------------------------- * Sat Jan 19 2013 Michael Cronenworth <mike(a)cchtml.com> - 3.1.1-1 - New upstream release. mingw-libsigsegv-2.6-7.fc19 --------------------------- * Sat Jan 19 2013 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 2.6-7 - Fixed FTBFS against latest automake openscad-2013.01.08-1.fc18 -------------------------- * Tue Jan 08 2013 Miro Hrončok <mhroncok(a)redhat.com> - 2013.01.08-1 - New version * Sun Jan 06 2013 Miro Hrončok <miro(a)hroncok.cz> - 2013.01.05-1 - New version oxygen-icon-theme-4.9.98-1.fc19 ------------------------------- * Sat Jan 19 2013 Rex Dieter <rdieter(a)fedoraproject.org> - 4.9.98-1 - 4.9.98 perl-DBI-1.623-1.fc19 --------------------- * Thu Jan 03 2013 Petr Šabata <contyk(a)redhat.com> - 1.623-1 - 1.623 bump perl-HTML-Template-2.94-1.fc19 ------------------------------ * Fri Jan 18 2013 Tom Callaway <spot(a)fedoraproject.org> - 2.94-1 - update to 2.94 perl-Image-ExifTool-9.13-1.fc19 ------------------------------- * Fri Jan 18 2013 Tom Callaway <spot(a)fedoraproject.org> - 9.13-1 - update to 9.13 (stable) php-shout-0.9.2-12.fc19 ----------------------- * Fri Jan 04 2013 Remi Collet <remi(a)fedoraproject.org> - 0.9.2-12 - modernize, remove deprecated calls, add arginfo for reflection php-symfony2-BrowserKit-2.1.7-1.fc19 ------------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-ClassLoader-2.1.7-1.fc19 ------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Config-2.1.7-1.fc19 -------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Console-2.1.7-1.fc19 --------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-CssSelector-2.1.7-1.fc19 ------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-DependencyInjection-2.1.7-1.fc19 --------------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-DomCrawler-2.1.7-1.fc19 ------------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-EventDispatcher-2.1.7-1.fc19 ----------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Filesystem-2.1.7-1.fc19 ------------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Finder-2.1.7-1.fc19 -------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Form-2.1.7-1.fc19 ------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-HttpFoundation-2.1.7-1.fc19 ---------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-HttpKernel-2.1.7-1.fc19 ------------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Locale-2.1.7-1.fc19 -------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-OptionsResolver-2.1.7-1.fc19 ----------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Process-2.1.7-1.fc19 --------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Routing-2.1.7-1.fc19 --------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Security-2.1.7-1.fc19 ---------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Serializer-2.1.7-1.fc19 ------------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Templating-2.1.7-1.fc19 ------------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Translation-2.1.7-1.fc19 ------------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Validator-2.1.7-1.fc19 ----------------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-symfony2-Yaml-2.1.7-1.fc19 ------------------------------ * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 2.1.7-1 - Updated to upstream version 2.1.7 php-twig-Twig-1.12.1-1.fc19 --------------------------- * Fri Jan 18 2013 Shawn Iwinski <shawn.iwinski(a)gmail.com> 1.12.1-1 - Updated to upstream version 1.12.1 policycoreutils-2.1.13-55.fc19 ------------------------------ * Tue Jan 15 2013 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-55 - Update Translations - Fix handling of semanage generate --cgi -n MODULE PATHTO/CGI - This fixes the spec file and script file getting wrong names for modules and types. * Wed Jan 09 2013 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-54 - Additional patch from Miroslav to handle role attributes * Wed Jan 09 2013 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-53 - Update with Miroslav patch to handle role attributes - Update Translations - import sepolicy will only throw exception on missing policy iff selinux is enabled * Sat Jan 05 2013 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-52 - Update to latest patches from eparis/Upstream - secon: add support for setrans color information in prompt output - Update translations * Fri Jan 04 2013 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-51 - Update translations - Fix sepolicy booleans to handle autogenerated booleans descriptions - Cleanups of sepolicy manpage - Fix crash on git_shell man page generation * Thu Jan 03 2013 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-50 - Update translations - update sepolicy manpage to generate fcontext equivalence data and to list default file context paths. - Add ability to generate policy for confined admins and domains like puppet. * Thu Dec 20 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-49 - Fix semanage permissive , this time with the patch. - Update translations * Wed Dec 19 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-48 - Fix semanage permissive - Change to use correct gtk forward button - Update po python-dbusmock-0.4.0-1.fc19 ---------------------------- * Mon Jan 21 2013 Bastien Nocera <bnocera(a)redhat.com> 0.4.0-1 - Update to 0.4.0 python-django-horizon-2013.1-0.3.g2.fc19 ---------------------------------------- * Sat Jan 19 2013 Matthias Runge <mrunge(a)redhat.com> - 2013.1-0.4.g2 - update to grizzly-2 - fix compression during build * Mon Jan 07 2013 Matthias Runge <mrunge(a)redhat.com> - 2013.1-0.3.g1 - use nodejs/lessjs to compress ristretto-0.6.3-1.fc19 ---------------------- safekeep-1.4.1-1.fc19 --------------------- * Sat Jan 19 2013 Frank Crawford <frank(a)crawford.emu.id.au> 1.4.1-1 - Latest upstream release selinux-policy-3.11.1-69.1.fc19 ------------------------------- shigofumi-0.3-1.fc19 -------------------- umph-0.2.5-1.fc19 ----------------- * Fri Jan 18 2013 Nicoleau Fabien <nicoleau.fabien(a)gmail.com> 0.2.5-1 - Update to 0.2.5 w3m-0.5.3-8.fc19 ---------------- * Tue Dec 11 2012 Parag <pnemade AT redhat DOT com> - 0.5.3-8 - Resolves:rh#885940 - suggestions for further improvements - Drop w3m-0.4.1-helpcharset.patch as default encoding works fine - Drop w3m-0.5.1-gcc4.patch as compilation works fine without it wallpapoz-0.6.2-4.fc19 ---------------------- * Sat Jan 19 2013 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 0.6.2-4 - Support LXDE xorg-x11-drv-omap-0.4.3-1.fc19 ------------------------------ * Tue Jan 15 2013 Peter Robinson <pbrobinson(a)fedoraproject.org> 0.4.3-1 - Update to the 0.4.3 tagged release * Thu Jan 10 2013 Adam Jackson <ajax(a)redhat.com> - 0.4.2-3 - ABI rebuild Summary: Added Packages: 3 Removed Packages: 0 Upgraded Packages: 59 Compose finisheded at Tue Jan 22 09:39:26 UTC 2013

1 0

Re: [fedora-arm] FUDCon ARM related followup
by Peter Robinson 22 Jan '13

22 Jan '13

On Mon, Jan 21, 2013 at 1:57 PM, Bruno Wolff III <bruno(a)wolff.to> wrote: > On Sun, Jan 20, 2013 at 23:56:49 -0500, > Jonathan Masters <jcm(a)redhat.com> wrote: >> >> >> We had a number of conversations about how to involve more people in >> Fedora on ARM. We also had many other conversations that are being minuted >> on the wiki, with more notes and links to follow. Now is a great time to >> join arm@ and add your input. > > > Since a number of Fedora developers where given XO 1.75s last summer, > getting Fedora builds for those people might be a way to get more testing. > (Yeah, they mostly use Fedora stuff now, but they don't use a Fedora > kernel.) > > I have been testing OLPC builds, but that wipes my customizations, and I'd > rather do more normal Fedora testing with it. Fedora kernels don't support them because they're not all up stream and we don't have support for OFW even where their kernels are upstream. That being said you can use Fedora relatively easily while still doing an initial install with the XO image and getting XO kernel updates but still receiving standard Fedora updates and installing all the other standard Fedora stuff using yum. I documented it here: http://nullr0ute.com/2012/09/using-fedora-on-your-shiny-new-olpc-xo/ Peter

2 2

kernel-3.7.3-201.jcm1.fc18 (scratch build from FUDCon)
by Paul Whalen 21 Jan '13

21 Jan '13

Summary of testing kernel-3.7.3-201.jcm1.fc18 (http://arm.koji.fedoraproject.org/koji/taskinfo?taskID=1377370) Pandaboard ---------- - Boots, no dtb used, using u-boot Oct 2012 - when attempting to boot using device tree, the system hangs at starting the kernel Trimslice --------- - Boots using latest U-Boot (Aug 2012) & dtb - boot.scr used - http://fpaste.org/cYEn/ - confirmed /proc/device-tree exists - Did not boot on 'older' uboot commonly used (with or without use of dtb) Vexpress -------- - boots on F18 host by adding dtb to boot script - confirmed /proc/device-tree exists Highbank -------- - confirmed booting at FUDCon Paul

1 0

Issues on Trimslice with F18 beta
by Peter Robinson 21 Jan '13

21 Jan '13

Has anyone else seen issues booting on the Trimslice? Basically it boots through but seems unable to fine the rootfs so just hangs. http://www.fpaste.org/itUt/ Peter

4 7

Quick notes from Sunday....
by Jon Masters 21 Jan '13

21 Jan '13

On a plane...quickly written notes below. F18 - Eclipse. Needs builder gid change for mockuser. Apparently done but need known good NVR. - ghc-devel. Apparently just a dep issue. Needs followup. - js. Confusion exists as to whether fix works. Reconfirm what was tested and consider pkexec has broader issue, whether we are blocked. Probably needs technical probing. - PackageKit. Official update mechanism needs to work (see also pkexec). See also js. - v5 images. Should just need building once we have the above fixed. - dtb. Need to get dtb built into 3.6 based F18 RC images in order to be ready for 3.7. Especially OMAP and Tegra. Dennis prefers built in standard package, ok with doing so in 3.7 kernel (kernel-dtb) and pulling back into RC images as an exception this one time. Saves reissuing 3.6 kernel package. Some testing done. Need to verify all targets have right bits in place and check 3.7 kernel upgrade. Open issues - 3.7 kernel update scratch built. To send Peter final patch. Known working on highbank and versatile but unclear if upgrade works on e.g. OMAP. Need to at least get dtb in known good state on 3.6 image so we can hope to get 3.7 update right without hacks. Then need to test 3.7 more on OMAP, Tegra. - believe jcm's createrepo fix was never issued in an official package. Needs fix for PHX builders, etc. - spot experienced an issue likely caused by redhat-rpm-config not being installed by default in devel group, or via rpmbuild. Decision (acked by spot) to push for r-r-c dep on rpmbuild (all RPMs built on Fedora are generally Fedora/Red Hat targeted, other targets can then be supported specially via path override - we know we need Panu and others to agree this time around as not first time for this issue). - generic test package needed to e.g. on all arches cause fail if RPM macros or other build environment changes detected. Can then catch unintentional breaks like above mthumb. -- Sent from my iPad

5 7

perl-CGI failed dependencies
by Alex Villacís Lasso 21 Jan '13

21 Jan '13

Today I tried a yum update on my FC17 qemu system and got the following: Loaded plugins: presto Resolving Dependencies --> Running transaction check ---> Package perl-CGI.noarch 0:3.52-215.fc17 will be updated ---> Package perl-CGI.noarch 0:3.52-218.fc17 will be an update --> Processing Dependency: perl(:MODULE_COMPAT_5.14.3) for package: perl-CGI-3.52-218.fc17.noarch ---> Package tzdata.noarch 0:2012i-1.fc17 will be updated ---> Package tzdata.noarch 0:2012j-1.fc17 will be an update ---> Package tzdata-java.noarch 0:2012i-1.fc17 will be updated ---> Package tzdata-java.noarch 0:2012j-1.fc17 will be an update --> Finished Dependency Resolution Error: Package: perl-CGI-3.52-218.fc17.noarch (updates) Requires: perl(:MODULE_COMPAT_5.14.3) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest

2 2

← Newer
1
2
3
4
5
6
7
8
9
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

arm January 2013