The package rpms/slic3r-prusa3d.git has added or updated architecture specific content in
its
spec file (ExclusiveArch/ExcludeArch or %ifarch/%ifnarch) in commit(s):
https://src.fedoraproject.org/cgit/rpms/slic3r-prusa3d.git/commit/?id=25c....
Change:
-ExcludeArch: ppc64 ppc64p7 s390x armv7hl aarch64
Thanks.
Full change:
============
commit 25ca25741bff0702990593112dbf0cf60502e3f1
Author: Jason Tibbitts <tibbs(a)math.uh.edu>
Date: Fri Jun 7 19:06:30 2019 -0500
Renamed to prusa-slicer.
diff --git a/.gitignore b/.gitignore
deleted file mode 100644
index fe88a85..0000000
--- a/.gitignore
+++ /dev/null
@@ -1,16 +0,0 @@
-/slic3r-0.9.8-7105243.tar.gz
-/slic3r-0.9.9-01e86c2.tar.gz
-/slic3r-0.9.10b-f13c611.tar.gz
-/slic3r-0.9.10b-d0eac88.tar.gz
-/1.0.0RC1.tar.gz
-/1.0.0RC2.tar.gz
-/1.0.0RC3.tar.gz
-/1.0.0.tar.gz
-/1.0.1.tar.gz
-/1.1.5.tar.gz
-/1.1.6.tar.gz
-/1.1.7.tar.gz
-/1.2.9.tar.gz
-/version_1.33.8.tar.gz
-/version_1.41.0.tar.gz
-/version_1.41.3.tar.gz
diff --git a/Slic3r-version_1.37.1-cmake-install.patch
b/Slic3r-version_1.37.1-cmake-install.patch
deleted file mode 100644
index 9546a6e..0000000
--- a/Slic3r-version_1.37.1-cmake-install.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- Slic3r-version_1.37.1/CMakeLists.txt.orig 2017-09-25 09:50:46.369876937 -0500
-+++ Slic3r-version_1.37.1/CMakeLists.txt 2017-09-25 09:53:32.145771582 -0500
-@@ -1,6 +1,8 @@
- # Boost 1.63 requires CMake 3.7 or newer
- cmake_minimum_required(VERSION 2.8)
-
-+include(GNUInstallDirs)
-+
- project(Slic3r)
-
- if (NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
-@@ -52,6 +54,6 @@
- install(PROGRAMS slic3r.pl DESTINATION bin RENAME slic3r-prusa3d)
-
- file(GLOB MyVar var/*.png)
--install(FILES ${MyVar} DESTINATION share/slic3r-prusa3d)
--install(FILES lib/Slic3r.pm DESTINATION lib/slic3r-prusa3d)
--install(DIRECTORY lib/Slic3r DESTINATION lib/slic3r-prusa3d)
-+install(FILES ${MyVar} DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/slic3r-prusa3d)
-+install(FILES lib/Slic3r.pm DESTINATION ${LIB_INSTALL_DIR}/slic3r-prusa3d)
-+install(DIRECTORY lib/Slic3r DESTINATION ${LIB_INSTALL_DIR}/slic3r-prusa3d)
---- Slic3r-version_1.37.1/xs/CMakeLists.txt.orig 2017-09-25 12:50:11.891168212 -0500
-+++ Slic3r-version_1.37.1/xs/CMakeLists.txt 2017-09-25 12:51:41.736654225 -0500
-@@ -2,6 +2,8 @@
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-
-+include(GNUInstallDirs)
-+
- # Add our own cmake module path.
- list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake/modules/)
-
-@@ -548,5 +550,5 @@
- endif ()
-
- # Installation
--install(TARGETS XS DESTINATION lib/slic3r-prusa3d/auto/Slic3r/XS)
--install(FILES lib/Slic3r/XS.pm DESTINATION lib/slic3r-prusa3d/Slic3r)
-+install(TARGETS XS DESTINATION ${LIB_INSTALL_DIR}/slic3r-prusa3d/auto/Slic3r/XS)
-+install(FILES lib/Slic3r/XS.pm DESTINATION ${LIB_INSTALL_DIR}/slic3r-prusa3d/Slic3r)
diff --git a/dead.package b/dead.package
new file mode 100644
index 0000000..3a3d400
--- /dev/null
+++ b/dead.package
@@ -0,0 +1 @@
+Renamed to prusa-slicer.
diff --git a/slic3r-boost169.patch b/slic3r-boost169.patch
deleted file mode 100644
index 753f0f4..0000000
--- a/slic3r-boost169.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- Slic3r-version_1.41.0/xs/src/libslic3r/GCodeSender.hpp~ 2019-01-30 12:25:49.223660421
+0000
-+++ Slic3r-version_1.41.0/xs/src/libslic3r/GCodeSender.hpp 2019-01-30 12:25:57.174646946
+0000
-@@ -8,6 +8,7 @@
- #include <boost/asio.hpp>
- #include <boost/bind.hpp>
- #include <boost/thread.hpp>
-+#include <boost/core/noncopyable.hpp>
-
- namespace Slic3r {
-
diff --git a/slic3r-buildpl.patch b/slic3r-buildpl.patch
deleted file mode 100644
index 74c93ae..0000000
--- a/slic3r-buildpl.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff --git a/Build.PL b/Build.PL
-index 5c650ce..09febb4 100644
---- a/Build.PL
-+++ b/Build.PL
-@@ -146,7 +146,9 @@ if (@missing_prereqs) {
- exit 1;
- } elsif (!$gui) {
- eval "use App::Prove; 1" or die "Failed to load App::Prove";
-- my $res = App::Prove->new->run ? 0 : 1;
-+ my $app = App::Prove->new;
-+ $app->process_args('-Ixs/blib/lib','-Ixs/blib/arch');
-+ my $res = $app->run ? 0 : 1;
- if ($res == 0) {
- print "If you also want to use the GUI you can now run `perl Build.PL
--gui` to install the required modules.\n";
- } else {
diff --git a/slic3r-clipper.patch b/slic3r-clipper.patch
deleted file mode 100644
index 820ef87..0000000
--- a/slic3r-clipper.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-diff --git a/xs/src/libslic3r/ClipperUtils.hpp b/xs/src/libslic3r/ClipperUtils.hpp
-index ab144f2..86331ac 100644
---- a/xs/src/libslic3r/ClipperUtils.hpp
-+++ b/xs/src/libslic3r/ClipperUtils.hpp
-@@ -2,7 +2,7 @@
- #define slic3r_ClipperUtils_hpp_
-
- #include <myinit.h>
--#include "clipper.hpp"
-+#include <polyclipping/clipper.hpp>
- #include "ExPolygon.hpp"
- #include "Polygon.hpp"
- #include "Surface.hpp"
-diff --git a/xs/src/libslic3r/Geometry.cpp b/xs/src/libslic3r/Geometry.cpp
-index 827029a..e5b54bb 100644
---- a/xs/src/libslic3r/Geometry.cpp
-+++ b/xs/src/libslic3r/Geometry.cpp
-@@ -3,7 +3,7 @@
- #include "ExPolygon.hpp"
- #include "Line.hpp"
- #include "PolylineCollection.hpp"
--#include "clipper.hpp"
-+#include <polyclipping/clipper.hpp>
- #include <algorithm>
- #include <cmath>
- #include <list>
-diff --git a/xs/xsp/Clipper.xsp b/xs/xsp/Clipper.xsp
-index d9530f7..3ba2448 100644
---- a/xs/xsp/Clipper.xsp
-+++ b/xs/xsp/Clipper.xsp
-@@ -2,7 +2,7 @@
-
- %{
- #include <myinit.h>
--#include "clipper.hpp"
-+#include <polyclipping/clipper.hpp>
- #include "libslic3r/ClipperUtils.hpp"
- %}
-
diff --git a/slic3r-datadir.patch b/slic3r-datadir.patch
deleted file mode 100644
index 90d9303..0000000
--- a/slic3r-datadir.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -up Slic3r-version_1.41.0/lib/Slic3r.pm.datadir Slic3r-version_1.41.0/lib/Slic3r.pm
---- Slic3r-version_1.41.0/lib/Slic3r.pm.datadir 2018-10-01 15:36:03.834202335 -0400
-+++ Slic3r-version_1.41.0/lib/Slic3r.pm 2018-10-01 15:37:07.508782953 -0400
-@@ -41,7 +41,7 @@ warn "Running Slic3r under Perl 5.16 is
- use FindBin;
-
- # Let the XS module know where the GUI resources reside.
--set_resources_dir(decode_path($FindBin::Bin) . (($^O eq 'darwin') ?
'/../Resources' : '/resources'));
-+set_resources_dir("/usr/share/slic3r-prusa3d/" . $_[0]);
- set_var_dir(resources_dir() . "/icons");
- set_local_dir(resources_dir() . "/localization/");
-
diff --git a/slic3r-english-locale.patch b/slic3r-english-locale.patch
deleted file mode 100644
index d01a79a..0000000
--- a/slic3r-english-locale.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff --git a/slic3r.pl b/slic3r.pl
-index a533250..814d8b7 100755
---- a/slic3r.pl
-+++ b/slic3r.pl
-@@ -11,6 +11,7 @@ BEGIN {
- use Getopt::Long qw(:config no_auto_abbrev);
- use List::Util qw(first);
- use POSIX qw(setlocale LC_NUMERIC);
-+$ENV{LC_NUMERIC} = 'en_US.UTF-8';
- use Slic3r;
- use Time::HiRes qw(gettimeofday tv_interval);
- $|++;
diff --git a/slic3r-linker.patch b/slic3r-linker.patch
deleted file mode 100644
index 481b458..0000000
--- a/slic3r-linker.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/xs/Build.PL b/xs/Build.PL
-index 51d1a01..cc5805b 100644
---- a/xs/Build.PL
-+++ b/xs/Build.PL
-@@ -219,6 +219,8 @@ print "\n";
- print 'With @INC: ', join(', ', map "\"$_\"", @INC),
"\n";
- print 'With @LIBS: ', join(', ', map "\"$_\"",
@LIBS), "\n";
-
-+push @LIBS, qw(-lpoly2tri);
-+
- my $build = Module::Build::WithXSpp->new(
- module_name => 'Slic3r::XS',
- dist_abstract => 'XS code for Slic3r',
diff --git a/slic3r-nlopt-fix.patch b/slic3r-nlopt-fix.patch
deleted file mode 100644
index 5603ddc..0000000
--- a/slic3r-nlopt-fix.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -up Slic3r-version_1.41.0/xs/src/libnest2d/cmake_modules/FindNLopt.cmake.nloptfix
Slic3r-version_1.41.0/xs/src/libnest2d/cmake_modules/FindNLopt.cmake
----
Slic3r-version_1.41.0/xs/src/libnest2d/cmake_modules/FindNLopt.cmake.nloptfix 2018-10-01
16:01:14.877278677 -0400
-+++ Slic3r-version_1.41.0/xs/src/libnest2d/cmake_modules/FindNLopt.cmake 2018-10-01
16:01:23.100093948 -0400
-@@ -29,7 +29,7 @@ if(NOT NLopt_DIR)
-
- set(NLopt_FOUND TRUE)
-
-- set(_NLopt_LIB_NAMES "nlopt")
-+ set(_NLopt_LIB_NAMES "nlopt_cxx")
- find_library(NLopt_LIBS
- NAMES ${_NLopt_LIB_NAMES})
- if(NOT NLopt_LIBS)
diff --git a/slic3r-prusa3d.appdata.xml b/slic3r-prusa3d.appdata.xml
deleted file mode 100644
index 79592a5..0000000
--- a/slic3r-prusa3d.appdata.xml
+++ /dev/null
@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- Copyright 2013 Alessandro Ranellucci <alessandro(a)unterwelt.it> -->
-<application>
- <id type="desktop">slic3r-prusa3d.desktop</id>
- <licence>CC-BY</licence>
- <summary>G-code generator for 3D printers</summary>
- <description>
- <p>Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code
instructions for 3D printers. It's compatible with any modern printer based on the
RepRap toolchain, including all those based on the Marlin, Sprinter and Repetier firmware.
It also works with Mach3 and LinuxCNC controllers. This is Slic3r Prusa Edition, a
modified version of Slic3r adding more features not only useful for the Prusa
printers.</p>
- <p>Key features are:</p>
- <ul>
- <li>additional complete command-line interface to use it with no
GUI</li>
- <li>multi-material (multiple extruders) object printing</li>
- <li>multiple G-code flavors supported (RepRap, Makerbot, Mach3
etc.)</li>
- <li>ability to plate multiple objects having distinct print
settings</li>
- <li>multithread processing</li>
- <li>STL auto-repair (tolerance for broken models)</li>
- </ul>
- </description>
- <screenshots>
- <screenshot type="default" width="1061"
height="594">https://cloud.githubusercontent.com/assets/2401...
- </screenshots>
- <url
type="homepage">https://github.com/prusa3d/Slic3r</url>
- <updatecontact>bubnikv(a)gmail.com</updatecontact>
-</application>
diff --git a/slic3r-prusa3d.desktop b/slic3r-prusa3d.desktop
deleted file mode 100644
index 545acb2..0000000
--- a/slic3r-prusa3d.desktop
+++ /dev/null
@@ -1,7 +0,0 @@
-[Desktop Entry]
-Name=Slic3r Prusa Edition
-Exec=slic3r-prusa3d
-Icon=slic3r-prusa3d
-Terminal=false
-Type=Application
-Categories=Graphics;3DGraphics;
diff --git a/slic3r-prusa3d.spec b/slic3r-prusa3d.spec
deleted file mode 100644
index 0948602..0000000
--- a/slic3r-prusa3d.spec
+++ /dev/null
@@ -1,313 +0,0 @@
-%global orig slic3r
-Name: %{orig}-prusa3d
-Version: 1.41.3
-Release: 2%{?dist}
-Summary: G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
-License: AGPLv3 and CC-BY
-# Images are CC-BY, code is AGPLv3
-URL:
https://github.com/prusa3d/Slic3r
-Source0:
https://github.com/prusa3d/Slic3r/archive/version_%{version}.tar.gz
-
-# Modify Build.PL so we are able to build this on Fedora
-Patch0: %{orig}-buildpl.patch
-
-# Use /usr/share/slic3r as datadir
-Patch1: %{orig}-datadir.patch
-Patch2: %{orig}-english-locale.patch
-Patch3: %{orig}-linker.patch
-#Patch4: %%{orig}-clipper.patch
-Patch5: %{orig}-nlopt-fix.patch
-Patch6: %{orig}-wayland.patch
-Patch7: %{orig}-boost169.patch
-
-Source1: %{name}.desktop
-Source2: %{name}.appdata.xml
-
-# This Slic3r does not support big endian
-#
https://github.com/prusa3d/Slic3r/commit/2085a482c76d88bfbb7ed8b5c598ff9f...
-# Does not seem to like wxWidgets on armv7hl or aarch64 either
-ExcludeArch: ppc64 ppc64p7 s390x armv7hl aarch64
-
-
-BuildRequires: boost-devel
-BuildRequires: cmake
-BuildRequires: curl-devel
-BuildRequires: desktop-file-utils
-BuildRequires: eigen3-devel
-BuildRequires: expat-devel
-BuildRequires: gcc-c++
-BuildRequires: glew-devel
-BuildRequires: gtest-devel
-BuildRequires: ImageMagick
-BuildRequires: NLopt-devel
-BuildRequires: perl-devel
-BuildRequires: perl-generators
-BuildRequires: perl(Alien::wxWidgets)
-# The Build.PL uses this, but we don't use it, so nah.
-# BuildRequires: perl(App::cpanminus)
-BuildRequires: perl(Class::XSAccessor)
-BuildRequires: perl(Devel::CheckLib)
-BuildRequires: perl(Encode::Locale) >= 1.05
-BuildRequires: perl(ExtUtils::CBuilder)
-BuildRequires: perl(ExtUtils::Embed)
-BuildRequires: perl(ExtUtils::MakeMaker) >= 6.80
-BuildRequires: perl(ExtUtils::ParseXS) >= 3.22
-BuildRequires: perl(ExtUtils::Typemaps::Default) >= 1.05
-BuildRequires: perl(ExtUtils::Typemaps::Basic)
-BuildRequires: perl(ExtUtils::Typemaps) >= 1.00
-BuildRequires: perl(File::Basename)
-BuildRequires: perl(File::Spec)
-BuildRequires: perl(Getopt::Long)
-BuildRequires: perl(Growl::GNTP) >= 0.15
-BuildRequires: perl(IO::Scalar)
-BuildRequires: perl(List::Util)
-BuildRequires: perl(Math::PlanePath) >= 53
-BuildRequires: perl(Module::Build::WithXSpp) >= 0.14
-BuildRequires: perl(Moo) >= 1.003001
-BuildRequires: perl(parent)
-BuildRequires: perl(POSIX)
-BuildRequires: perl(Scalar::Util)
-BuildRequires: perl(Storable)
-BuildRequires: perl(SVG)
-BuildRequires: perl(Test::Harness)
-BuildRequires: perl(Test::More)
-BuildRequires: perl(Thread::Semaphore)
-BuildRequires: perl(threads) >= 1.96
-BuildRequires: perl(Time::HiRes)
-BuildRequires: perl(Unicode::Normalize)
-BuildRequires: perl(Wx)
-BuildRequires: perl(XML::SAX)
-BuildRequires: perl(XML::SAX::ExpatXS)
-# BuildRequires: poly2tri-devel
-BuildRequires: qhull-devel
-BuildRequires: tbb-devel
-BuildRequires: wxBase3-devel
-BuildRequires: wxGTK3-devel
-#BuildRequires: admesh-devel >= 0.98.1
-#BuildRequires: polyclipping-devel >= 6.2.0
-
-Requires: perl(XML::SAX)
-Requires: perl(:MODULE_COMPAT_%(eval "`perl -V:version`"; echo
$version))
-#Requires: admesh-libs >= 0.98.1
-Requires: hicolor-icon-theme
-# For faster slicing
-Recommends: perl(Thread::Queue)
-
-# Fedora polyclipping version is not compatible
-Provides: bundled(polyclipping) = 6.2.9
-# Easier just to leave this in place
-Provides: bundled(poly2tri)
-# Upstream has custom patches, reluctant to send to upstream
-Provides: bundled(admesh-libs) = 0.98.1
-
-%description
-This is Slic3r Prusa Edition, a modified version of Slic3r adding more features
-not only useful for the Prusa printers.
-
-Slic3r is a G-code generator for 3D printers. It's compatible with RepRaps,
-Makerbots, Ultimakers and many more machines.
-See the project homepage at
slic3r.org and the documentation on the Slic3r wiki
-for more information.
-
-%prep
-%setup -qn Slic3r-version_%{version}
-
-# %%patch0 -p1
-%patch1 -p1 -b .datadir
-# %%patch2 -p1 -b .english
-# %%patch3 -p1 -b .linker
-#%%patch4 -p1
-%if %{?fedora} < 30
-%patch5 -p1 -b .nloptfix
-%endif
-%patch6 -p1 -b .wayland
-%patch7 -p1 -b .boost169
-
-# Remove bundled libs
-#rm -rf xs/src/admesh
-#rm xs/src/clipper.*pp
-# rm -rf xs/src/poly2tri
-# rm -rf xs/src/boost
-# rm -rf xs/src/glew
-# There is also Shiny, a profiler. But it's basically ifdefed out.
-
-# Fix the version
-sed -i 's/#define SLIC3R_VERSION .*$/#define SLIC3R_VERSION
"%{version}"/' xs/src/libslic3r/libslic3r.h
-
-# Fix the shebang
-sed -i 's|#!/usr/bin/env perl|#!%{__perl}|' %{orig}.pl
-
-#####################
-# Move it to a separate namespace, so it does not conflict with the slic3r package
-mv lib/Slic3r lib/Slic3rPrusa
-mv lib/Slic3r.pm lib/Slic3rPrusa.pm
-mv xs/lib/Slic3r xs/lib/Slic3rPrusa
-
-# Perl
-find . \( -name '*.pm' -o -name '*.t' -o -name '*.pl' -o -name
'*.PL' -o -name '*.xsp' -o -name '*.map' \) -exec \
- sed -i -e 's/Slic3r::/Slic3rPrusa::/g' \
- -e 's/package Slic3r;/package Slic3rPrusa;/g' \
- -e 's/{Slic3r};/{Slic3rPrusa};/g' \
- -e 's/use Slic3r;/use Slic3rPrusa;/g' \
- {} \;
-
-sed -i 's|/Slic3r/|/Slic3rPrusa/|g' xs/CMakeLists.txt
-sed -i 's|lib/Slic3r|lib/Slic3rPrusa|g' CMakeLists.txt
-
-# C++
-find xs/src \( -name '*.cpp' -o -name '*.c' -o -name '*.hpp' -o
-name '*.h' \) -exec \
- sed -i -e 's/Slic3r::/Slic3rPrusa::/g' \
- -e 's/namespace Slic3r/namespace Slic3rPrusa/g' \
- -e 's/MsgUpdateSlic3rPrusa/MsgUpdateSlic3r/g' \
- {} \;
-
-find src \( -name '*.cpp' -o -name '*.c' -o -name '*.hpp' -o
-name '*.h' \) -exec \
- sed -i -e 's/Slic3r::/Slic3rPrusa::/g' \
- -e 's/namespace Slic3r/namespace Slic3rPrusa/g' \
- -e 's/MsgUpdateSlic3rPrusa/MsgUpdateSlic3r/g' \
- {} \;
-
-# Settings directory
-sed -i 's/GetUserDataDir)/GetUserDataDir)."Prusa"/'
lib/Slic3rPrusa/GUI.pm
-
-#####################
-
-%build
-# perl ./Build.PL installdirs=vendor optimize="$RPM_OPT_FLAGS"
-mkdir Build
-pushd Build
-%{cmake} .. -DCMAKE_BUILD_TYPE=Release
-%{make_build}
-popd
-
-# prepare pngs in mutliple sizes
-for res in 16 24 32 48 128; do
- mkdir -p hicolor/${res}x${res}/apps
-done
-cd hicolor
-convert ../resources/icons/Slic3r.ico %{name}.png
-cp %{name}-0.png 128x128/apps/%{name}.png
-cp %{name}-2.png 48x48/apps/%{name}.png
-cp %{name}-3.png 32x32/apps/%{name}.png
-cp %{name}-4.png 24x24/apps/%{name}.png
-cp %{name}-5.png 16x16/apps/%{name}.png
-rm %{name}-*.png
-cd -
-
-# To avoid "iCCP: Not recognized known sRGB profile that has been edited"
-cd resources/icons/
-find . -type f -name "*.png" -exec convert {} -strip {} \;
-cd -
-
-%install
-pushd Build
-%{make_install}
-popd
-
-%if 0
-./Build install destdir=%{buildroot} create_packlist=0
-cd -
-find %{buildroot} -type f -name '*.bs' -size 0 -exec rm -f {} \;
-
-# I see no way of installing slic3r with it's build script
-# So I copy the files around manually
-mkdir -p %{buildroot}%{_bindir}
-mkdir -p %{buildroot}%{perl_vendorlib}
-
-cp -a %{orig}.pl %{buildroot}%{_bindir}/%{name}
-cp -ar lib/* %{buildroot}%{perl_vendorlib}
-%endif
-
-mkdir -p %{buildroot}%{_datadir}/%{name}
-cp -a resources/* %{buildroot}%{_datadir}/%{name}
-
-mkdir -p %{buildroot}%{_datadir}/icons
-mkdir -p %{buildroot}%{_datadir}/appdata
-cp -r hicolor %{buildroot}%{_datadir}/icons
-desktop-file-install --dir=%{buildroot}%{_datadir}/applications %{SOURCE1}
-
-cp %{SOURCE2} %{buildroot}%{_datadir}/appdata/%{name}.appdata.xml
-
-mv %{buildroot}/usr/lib/slic3r-prusa3d/* %{buildroot}%{perl_vendorarch}/
-mv %{buildroot}%{perl_vendorlib}/Slic3r %{buildroot}%{perl_vendorlib}/Slic3rPrusa
-
-%{_fixperms} %{buildroot}*
-
-%files
-%doc README.md
-%{_bindir}/%{name}
-%{perl_vendorlib}/Slic3rPrusa*
-%{perl_vendorarch}/Slic3rPrusa*
-%{perl_vendorarch}/auto/Slic3rPrusa*
-%{_datadir}/icons/hicolor/*/apps/%{name}.png
-%{_datadir}/applications/%{name}.desktop
-%{_datadir}/appdata/%{name}.appdata.xml
-%{_datadir}/%{name}
-
-%changelog
-* Fri May 31 2019 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.41.3-2
-- Perl 5.30 rebuild
-
-* Fri Feb 15 2019 Jason L Tibbitts III <tibbs(a)math.uh.edu> - 1.41.3-1
-- Update to 1.41.3.
-
-* Sat Feb 02 2019 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.41.0-4
-- Rebuilt for
https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
-
-* Wed Jan 30 2019 Jonathan Wakely <jwakely(a)redhat.com> - 1.41.0-3
-- Rebuilt and patched for Boost 1.69
-
-* Sun Dec 23 2018 Miro Hronok <mhroncok(a)redhat.com> - 1.41.0-2
-- Set GDK_BACKEND=x11 to prevent crashes on Wayland (#1661324)
-
-* Mon Oct 1 2018 Tom Callaway <spot(a)fedoraproject.org> - 1.41.0-1
-- update to 1.41.0
-
-* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> -
1.33.8-12
-- Rebuilt for
https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
-
-* Sat Jun 30 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.33.8-11
-- Perl 5.28 rebuild
-
-* Tue Jun 05 2018 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.33.8-10
-- Add missing BR perl(ExtUtils::CBuilder)
-
-* Fri Feb 09 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.33.8-9
-- Rebuilt for
https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
-
-* Thu Jan 18 2018 Igor Gnatenko <ignatenkobrain(a)fedoraproject.org> - 1.33.8-8
-- Remove obsolete scriptlets
-- Rebuilt for new boost
-
-* Thu Aug 03 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.33.8-7
-- Rebuilt for
https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
-
-* Thu Jul 27 2017 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.33.8-6
-- Rebuilt for
https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
-
-* Wed Jul 19 2017 Jonathan Wakely <jwakely(a)redhat.com> - 1.33.8-5
-- Rebuilt for s390x binutils bug
-
-* Tue Jul 18 2017 Jonathan Wakely <jwakely(a)redhat.com> - 1.33.8-4
-- Rebuilt for Boost 1.64
-
-* Thu Jun 08 2017 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.33.8-3
-- Perl 5.26 re-rebuild of bootstrapped packages
-
-* Mon May 15 2017 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> -
1.33.8-2
-- Rebuilt for
https://fedoraproject.org/wiki/Fedora_26_27_Mass_Rebuild
-
-* Wed Feb 22 2017 Miro Hronok <mhroncok(a)redhat.com> - 1.33.8-1
-- Update to 1.33.8
-- Mention it's a fork in the description and appdata file
-- Require hicolor-icon-theme
-- Exclude big endian arches
-
-* Sat Dec 17 2016 Miro Hronok <mhroncok(a)redhat.com> - 1.31.6-1
-- Update to 1.31.6
-- Bundle admesh
-- Recommend Thread::Queue for faster slicing
-- Unbundle glew
-
-* Fri Nov 11 2016 Miro Hronok <mhroncok(a)redhat.com> - 1.31.4-1
-- New package adapted from the slic3r package
diff --git a/slic3r-wayland.patch b/slic3r-wayland.patch
deleted file mode 100644
index 8a41b13..0000000
--- a/slic3r-wayland.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff --git a/slic3r.pl b/slic3r.pl
-index d9bed0a..7d8a249 100755
---- a/slic3r.pl
-+++ b/slic3r.pl
-@@ -18,6 +18,7 @@ use Slic3r::Geometry qw(deg2rad);
- use Time::HiRes qw(gettimeofday tv_interval);
- $|++;
- binmode STDOUT, ':utf8';
-+$ENV{GDK_BACKEND} = 'x11';
-
- # Convert all parameters from the local code page to utf8 on Windows.
- @ARGV = map Slic3r::decode_path($_), @ARGV if $^O eq 'MSWin32';
diff --git a/sources b/sources
deleted file mode 100644
index 108913a..0000000
--- a/sources
+++ /dev/null
@@ -1 +0,0 @@
-SHA512 (version_1.41.3.tar.gz) =
df22f6dfa6d9ec5fb838307c0dd690328b75d523d2c9e16bce5d9cda73cd2fe83a5d8b01c6437527c0a61195b673b23cede4411fd5372f95022c72f92df316ca