More errors trying to connect to domain from command line linux:
*[root@ldap home]# net rpc join -d 3 -l -S ldap -U admin*
[2008/06/24 17:40:54, 3] param/loadparm.c:lp_load_ex(8669)
lp_load_ex: refreshing parameters
[2008/06/24 17:40:54, 3] param/loadparm.c:init_globals(4588)
Initialising global parameters
[2008/06/24 17:40:54, 3] param/params.c:pm_process(569)
params.c:pm_process() - Processing configuration file
"/etc/samba/smb.conf"
[2008/06/24 17:40:54, 3] param/loadparm.c:do_section(7334)
Processing section "[global]"
[2008/06/24 17:40:54, 2] lib/interface.c:add_interface(334)
added interface eth0 ip=fe80::211:25ff:fe0c:5d8d%eth0
bcast=fe80::ffff:ffff:ff
ff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
[2008/06/24 17:40:54, 2] lib/interface.c:add_interface(334)
added interface eth0 ip=192.168.1.12 bcast=192.168.1.255 netmask=
255.255.255.0
[2008/06/24 17:40:54, 3] libsmb/cliconnect.c:cli_start_connection(1632)
Connecting to host=ldap
[2008/06/24 17:40:54, 3] lib/util_sock.c:open_socket_out(1332)
Connecting to 192.168.1.12 at port 445
[2008/06/24 17:40:54, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
*rpc_pipe_bind: Remote machine ldap pipe \lsarpc fnum 0x750c bind request
retur
ned ok.*
[2008/06/24 17:40:54, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
rpc_pipe_bind: Remote machine ldap pipe \NETLOGON fnum 0x750d bind request
ret
urned ok.
[2008/06/24 17:40:54, 3] libsmb/trusts_util.c:just_change_the_password(56)
just_change_the_password: unable to setup creds (NT_STATUS_ACCESS_DENIED)!
[2008/06/24 17:40:54, 1] utils/net_rpc.c:run_rpc_command(181)
rpc command function failed! (NT_STATUS_ACCESS_DENIED)
*Enter admin's password:*
[2008/06/24 17:41:03, 3] libsmb/cliconnect.c:cli_start_connection(1632)
Connecting to host=ldap
[2008/06/24 17:41:03, 3] lib/util_sock.c:open_socket_out(1332)
Connecting to 192.168.1.12 at port 445
[2008/06/24 17:41:03, 3] libsmb/cliconnect.c:cli_session_setup_spnego(801)
Doing spnego session setup (blob length=58)
[2008/06/24 17:41:03, 3] libsmb/cliconnect.c:cli_session_setup_spnego(826)
got OID=1 3 6 1 4 1 311 2 2 10
[2008/06/24 17:41:03, 3] libsmb/cliconnect.c:cli_session_setup_spnego(834)
got principal=NONE
[2008/06/24 17:41:03, 3] libsmb/ntlmssp.c:ntlmssp_client_challenge(1025)
Got challenge flags:
[2008/06/24 17:41:03, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
Got NTLMSSP neg_flags=0x60898215
[2008/06/24 17:41:03, 3] libsmb/ntlmssp.c:ntlmssp_client_challenge(1047)
NTLMSSP: Set final flags:
[2008/06/24 17:41:03, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
Got NTLMSSP neg_flags=0x60088215
[2008/06/24 17:41:03, 3] libsmb/ntlmssp_sign.c:ntlmssp_sign_init(337)
NTLMSSP Sign/Seal - Initialising with flags:
[2008/06/24 17:41:03, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
Got NTLMSSP neg_flags=0x60088215
[2008/06/24 17:41:03, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
rpc_pipe_bind: Remote machine ldap pipe \lsarpc fnum 0x7503 bind request
retur
ned ok.
[2008/06/24 17:41:03, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2086)
rpc_pipe_bind: Remote machine ldap pipe \samr fnum 0x7504 bind request
returne
d ok.
*Creation of workstation account failed
Unable to join domain LDAP.*
[2008/06/24 17:41:03, 2] utils/net.c:main(1172)
return code = 1
Merle Reine
IT Manager Extraordinaire
Email Address: echo zreyr.ervar(a)tznvy.pbz | perl -pe 'y/a-z/n-za-m/'
On Tue, Jun 24, 2008 at 2:51 AM, yersinia <yersinia.spiros(a)gmail.com> wrote:
Likely are two different problem.
>
> "Transport endpoint is not connected" is a very - very - old XP problem
>
http://wiki.samba.org/index.php/Samba_Myths
>
> If you set smb ports = 445 (raw smb aka CIFS port) in smb.conf the message
> disappear - naturally you are to be sure that
> you serve only XP o Vista client.
>
> For the LDAP problem the message don't tell me so much. So try
>
> smbcontrol smbd debug 10
>
> and read again the log messages.
>
> Regards
>
> On Mon, Jun 23, 2008 at 10:56 PM, Merle Reine <merle.reine(a)gmail.com>
> wrote:
>
>> I know this has been asked a million times but I read all the posts and
>> none answer my issue so I hope someone will know a fix.
>>
>> I have fc9 with samba as PDC connecting to FDS.
>>
>> Followed the how-to to the letter but can not get my windows machine to
>> connect to the domain.
>>
>> My domain is : ldap
>> Windows machine is in random workgroup not associated with samba at all.
>>
>> When I try to add to domain using root and pass (yes, it is setup on
>> samba server), I get the following:
>>
>>
>> "The following error occured attempting to join the domain
"ldap":
>> A device attached to the system is not functioning.
>>
>> in /var/log/samba/samba.log:
>>
>> *[2008/06/23 13:53:44, 0] lib/util_sock.c:get_peer_addr_internal(1597)
>> getpeername failed. Error was Transport endpoint is not connected
>> [2008/06/23 13:53:44, 0] lib/util_sock.c:write_data(1059)
>> [2008/06/23 13:53:44, 0] lib/util_sock.c:get_peer_addr_internal(1597)
>> getpeername failed. Error was Transport endpoint is not connected
>> write_data: write failure in writing to client 0.0.0.0. Error
>> Connection reset
>> by peer
>> [2008/06/23 13:53:44, 0] smbd/process.c:srv_send_smb(74)
>> Error writing 4 bytes to client. -1. (Transport endpoint is not
>> connected)
>> [2008/06/23 13:53:44, 0] lib/util_sock.c:get_peer_addr_internal(1597)
>> getpeername failed. Error was Transport endpoint is not connected
>> [2008/06/23 13:53:44, 0] lib/util_sock.c:write_data(1059)
>> [2008/06/23 13:53:44, 0] lib/util_sock.c:get_peer_addr_internal(1597)
>> getpeername failed. Error was Transport endpoint is not connected
>> write_data: write failure in writing to client 0.0.0.0. Error
>> Connection reset
>> by peer
>> [2008/06/23 13:53:44, 0] smbd/process.c:srv_send_smb(74)
>> Error writing 4 bytes to client. -1. (Transport endpoint is not
>> connected)
>> [2008/06/23 13:53:44, 0] passdb/pdb_ldap.c:ldapsam_add_sam_account(2276)
>> ldapsam_add_sam_account: failed to modify/add user with uid = TEST$ (dn
>> = uid=
>> TEST$,ou=Computers,dc=gardenfreshcorp,dc=com)*
>>
>>
>> Any one have any ideas what I am missing?
>>
>> Thanks.
>>
>>
>>
>> Merle Reine
>> IT Manager Extraordinaire
>> Email Address: echo zreyr.ervar(a)tznvy.pbz | perl -pe 'y/a-z/n-za-m/'
>> --
>> Fedora-directory-users mailing list
>> Fedora-directory-users(a)redhat.com
>>
https://www.redhat.com/mailman/listinfo/fedora-directory-users
>>
>>
>
--
Fedora-directory-users mailing list
Fedora-directory-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/fedora-directory-users