Hi,
For me no issues to recive the logs.anyway, i have performed the following steps again,
1.Stop the "dirsrv" on both sides.
2.Enabled "nsslapd-errorlog-level: 8192" on both servers in "dse.ldif" file.
3.Started the "dirsrv" on both servers.
4.Export the datas in .ldif and imported to "sam" system
6.Then created one user under "ou=people" , as a uid=TT in supplier side (
varad.xxx.xxx.com)
7.but not replicated in other system...
[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): Disconnected from the consumer
[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): State: start -> ready_to_acquire_replica
[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): State: ready_to_acquire_replica -> wait_for_changes
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): State: wait_for_changes -> wait_for_changes
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): State: wait_for_changes -> start
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): No linger to cancel on the connection
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): Disconnected from the consumer
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): State: start -> ready_to_acquire_replica
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
varad.xxx.xxx.com port 389 to
sam.xxx.xxx.com port 389"" (sam:389): State: ready_to_acquire_replica -> wait_for_changes
Consumer system: (sam.xxx.xxx.xom):
[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): Disconnected from the consumer
[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): State: start -> ready_to_acquire_replica
[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): State: ready_to_acquire_replica -> wait_for_changes
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): State: wait_for_changes -> wait_for_changes
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): State: wait_for_changes -> start
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): No linger to cancel on the connection
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): Disconnected from the consumer
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): State: start -> ready_to_acquire_replica
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin - agmt="cn="Replication from
sam.xxx.xxx.com port 389 to
varad.xxx.xxx.com port 389"" (varad:389): State: ready_to_acquire_replica -> wait_for_changes
So,please let me know what is the problem ? and how to resolve ?
Regards,
Varad
On Wed, Jun 15, 2011 at 7:41 PM, Rich Megginson
<rmeggins@redhat.com> wrote:
On 06/14/2011 11:59 PM, s.varadha rajan wrote:
Hi,
Thanks for the reply.that's ok.but if i create one new user
in supplier side,it's not replicating to consumer side.i think
ubuntu 10.04 LTS supports fedora-ds 1.1.x and dont have updated
ppa links. for this case, shall i upgrade the latest version,
will give the solution? After upgrade, how can i migrate my
existing data.
First check your errors log on your supplier side to see if there
are any errors during the incremental update phase (the messages
below are from the init phase), then check the access log on the
consumer side to see if the supplier is connecting and attempting to
send the new user.
If that shows nothing, then try enabling the replication log level -
http://directory.fedoraproject.org/wiki/FAQ#Troubleshooting
or give me a solution for this.
Regards,
Varad
On Tue, Jun 14, 2011 at 8:26 PM, Rich
Megginson
<rmeggins@redhat.com>
wrote:
On 06/14/2011 08:23 AM, s.varadha rajan
wrote:
Hi,
I followed the procedure to configure
"multi-master replication" as per
http://directory.fedoraproject.org/wiki/Howto:MultiMasterReplication.
but i got an error as
From consumer side:
14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin
- multimaster_be_state_change: replica
o=netscaperoot is coming online; enabling
replication
[14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin
- replica_reload_ruv: Warning: new data for replica
o=netscaperoot does not match the data in the
changelog.
Recreating the changelog file. This could affect
replication with replica's consumers in which case
the consumers should be reinitialized.
This is not an error. It just means the consumer has been
initialized with data from the master, and it had old data
(probably from setup) which was wiped out.
From Supplier side:
[14/Jun/2011:19:26:12 +051800]
NSMMReplicationPlugin - Beginning total update of
replica "agmt="cn="Replication from
varad.xxx.xxx.com
port 389 to
sam.xxx.xxx.com
port 389"" (sam:389)".
[14/Jun/2011:19:26:15 +051800]
NSMMReplicationPlugin - Finished total update of
replica "agmt="cn="Replication from
varad.xxx.xxx.com
port 389 to
sam.xxx.xxx.com
port 389"" (sam:389)". Sent 120 entries.
Regards,
Varad
On Mon, May 30, 2011 at 12:27 PM, s.varadha rajan
<
rajanvaradhu@gmail.com>
wrote:
>
> Hi,
>
> Thanks for the reply.I will try and update
you further.
>
> Regards,
> Varad
>
>
>
> On Fri, May 27, 2011 at 8:30 PM, Rich
Megginson <
rmeggins@redhat.com>
wrote:
>>
>> On 05/27/2011 12:11 AM, s.varadha rajan
wrote:
>>
>> Hi,
>>
>> Can i get any update on my below query ?
>>
>> Regards,
>> Varad
>>
>> On Tue, May 24, 2011 at 6:17 PM,
s.varadha rajan <
rajanvaradhu@gmail.com>
wrote:
>>>
>>> Hi,
>>> We are using Ubuntu 10.04 server OS
and all the web applications are running on
that.We have already implemented fedora-ds for
ldap auth.now we are planning to go
some up-gradation.kindly let me know the
following,
>>> 1.How to migrate running fedora-ds
server to another server ?
>>> 2.i have taken all the user/group+etc
in ldif
format.is
it enough for migration or any other db
(/var/lib/dirsrv/slapd-<instance>) also need
to bacup ?
>>
>> LDIF should be fine.
>>>
>>> if any procedure please share with me
? how to import/export .ldif file
>>
>>
/usr/lib[64]/dirsrv/slapd-INSTNAME/db2ldif -
export database to ldif
>>
/usr/lib[64]/dirsrv/slapd-INSTNAME/ldif2db -
import database from ldif
>>>
>>>
3.in our
setup,one server is in public network.so i am
planning to do replication through "ldaps", i.e
local server to public server replication through
highly secure how to ?
>>
>> Not exactly, but there is plenty of
documentation - see
http://docs.redhat.com/docs/en-US/Red_Hat_Directory_Server/8.2/html-single/Administration_Guide/index.html#Managing_Replication-Replication_Overview
>>>
>>> Please help me on the above topics.
>>> Regards,
>>> Varad
>>
>> --
>> 389 users mailing list
>>
389-users@lists.fedoraproject.org
>>
https://admin.fedoraproject.org/mailman/listinfo/389-users
>