VPN options
by Keith Lofstrom
I am planning on running a Virtual Private Network from my Fedora
firewall out to a UML virtual colo (running RH9) at another site.
That site will be the place I present services to the world;
httpd, ssh, sftp, smtp. This is to comply with the "no servers"
and dynamic ip restrictions on my Comcast connection to the net;
if my firewall always drives an outbound connection to the
colocation site, I am not worried about changes of ip address,
and I am not opening any inbound ports.
There are a number of options for the VPN - the most attractive
are cipe ( http://sites.inka.de/sites/bigred/devel/cipe.html )
and FreeSwan ( http://www.freeswan.org/ ), though I am told that
one can do all this through an ssh tunnel. I would rather have
simple and secure than super-duper; I have plenty of bandwidth,
and will send outbound http and smtp from the firewall, so the
main bandwidth user will be incoming spam/b/b/b/b mail.
Anyone have some experiences to share about setting up VPN? Is
there anything about either cipe or FreeSwan that is likely to
break with FC1 or FC2?
Keith
--
Keith Lofstrom keithl(a)ieee.org Voice (503)-520-1993
KLIC --- Keith Lofstrom Integrated Circuits --- "Your Ideas in Silicon"
Design Contracting in Bipolar and CMOS - Analog, Digital, and Scan ICs
4 years, 6 months
copy and paste from mouse when window full of icons?
by Gianluca Cecchi
Hello,
while using "Files", the explorer application (version 3.28.1-stable) in my
Fedora 28 system, I have sometimes this kind of problem:
- I normally use what should be "list view" with list of file names
- if I have to paste a file/dir or group of copied files/dirs into a
location where the page listed is full (no blank space inside it), it seems
that I cannot paste: the right mouse click doesn't offer the paste option.
In these cases I temporarily switch to what should be "icon view" and in
this case I always have some blank space because of how items are displayed.
I select a blank space and then right-mouse --> paste
Then I come back to list view...
Is this a sort of bug or what?
Based on this link
https://help.gnome.org/users/gnome-help/stable/files-copy.html.en
I should have "paste" option in menu, but it doesn't happen, see screenshot:
https://drive.google.com/file/d/1X1ZPYPJ5B8IRDA6T_LL5AfbCD2YFAy6_/view?us...
NOTE: keyboard shortcut ctrl+c and ctrl+v works, though
Thanks in advance.
Gianluca
4 years, 9 months
Mounting internal disk spins up connected external USB disks
by Wolfgang Pfeiffer
Mounting an internally installed disk on a laptop spins up all
disks connected to this machine via USB. And I try to prevent these
externally connected disks to spin up.
The behaviour, IIRC, started a few months ago on the previous F27 and
continues now on F28. Before that I don't remember this behaviour to
have happened.
I thought it was some smartd issue, and stopped this service
("/usr/bin/systemctl stop smartd.service") - to no avail: mounting the
internal disk still spins up the external ones.
The internal disk is identified by "smartctl -d test /dev/sda" like
so:
[ ... ]
/dev/sda: Device of type 'scsi' [SCSI] detected
/dev/sda [SAT]: Device open changed type from 'scsi' to 'sat'
/dev/sda [SAT]: Device of type 'sat' [ATA] opened
(On a side note: I'm astonished that a smartctl simple info flag is
changing some device type like shown above)
External disks are identified by a smartctl test like so:
One:
"[USB Sunplus]: Device of type 'usbsunplus' [ATA] detected"
the other one:
"[SAT]: Device of type 'sat' [ATA] detected"
Anyone an idea about where to start investigating this issue? Where
could such behaviour possibly be set up?
Thanks in anticipation.
Wolfgang
5 years, 2 months
F29 support for Intel Rapid Storage Technology (RST)
by dsavage@peaknet.net
Does Fedora 29 support the Intel RST (Rapid Storage Technology) chip for
hardware RAID? My new ThinkPad P72 came with an RST chip set up with two
2TB PCIe M.2 SSDs in a RAID1 config. The Fedora-29-MATE-Compiz spin DVD
doesn't "see" it. Nor does Clonezilla.
There's a BIOS mode setting for the Intel RST: "RST" mode for RAID, and
"AHCI" mode for separate SATA drives. Changing that setting to AHCI will
probably break the RAID1 array and render the P72 unbootable. I don't know
if that would a destructive, irreversible change, or if changing the mode
setting back to RST would restore everything.
I've only tried the MATE spin. One purpose of this question is to find out
if the full installation DVD supports the Intel RST chip.
--Doc
Robert G. (Doc) Savage
Fairview Heights, IL
"Perfection is the enemy of good enough."
-- Admiral of the Fleet Sergei G. Gorshkov
5 years, 3 months
Failed to start Load Kernel Modules.
by Sudhir Khanger
Hello,
I get *Failed to start Load Kernel Modules* during the boot.
Everytime Kernel is updated VirtualBox modules fail I have to reboot into
the new Kernel, run the following commands and then it starts working.
$ sudo akmods --force
$ sudo dracut -v -f
$ sudo grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
Then everything starts working again and the boot error goes away. You can
found the background of the issue in the link below.
https://bugzilla.redhat.com/show_bug.cgi?id=1254340
My question is how can I automate this task.
5 years, 4 months
ACPI errors (was: f24 boot fails; need help).
by William
Good evening,
One of the problems reported in the log file "rdsosreport.txt" generated
by the failed boots discussed in the "f24 boot fails; need help" topic
was a set of "ACPI" errors. Here are the relevant lines (with added
line numbers) from that log file (the first and last lines are just for
context):
----------
862 [ 1.218683] coyote kernel: ata4: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
863 [ 1.218927] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
864 [ 1.219196] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff92ef8e0db488), AE_NOT_FOUND
(20160930/psparse-543)
865 [ 1.219856] coyote kernel: ata2.00: ATA-8:
ST2000DM001-1CH164, CC24, max UDMA/133
866 [ 1.220017] coyote kernel: ata2.00: 3907029168 sectors, multi
16: LBA48 NCQ (depth 31/32), AA
867 [ 1.220812] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
868 [ 1.221100] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff92ef8e0db488), AE_NOT_FOUND
(20160930/psparse-543)
869 [ 1.221620] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
870 [ 1.221909] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff92ef8e0dbac8), AE_NOT_FOUND
(20160930/psparse-543)
871 [ 1.222200] coyote kernel: ata6.00: ATAPI: HL-DT-ST BD-RE
BH14NS40, 1.00, max UDMA/100
872 [ 1.222374] coyote kernel: ata2.00: configured for UDMA/133
873 [ 1.222582] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
874 [ 1.222908] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff92ef8e0db348), AE_NOT_FOUND
(20160930/psparse-543)
875 [ 1.222919] coyote kernel: scsi 1:0:0:0: Direct-Access
ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
876 [ 1.223466] coyote kernel: ata4.00: ATAPI: PIONEER BD-RW
BDR-208M, 1.10, max UDMA/100
877 [ 1.226360] coyote kernel: ata7: SATA link down (SStatus 0
SControl 300)
878 [ 1.226407] coyote kernel: ata9: SATA link down (SStatus 0
SControl 300)
879 [ 1.226501] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
880 [ 1.226507] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff92ef8e0dbac8), AE_NOT_FOUND
(20160930/psparse-543)
881 [ 1.226519] coyote kernel: ata6.00: configured for UDMA/100
882 [ 1.227197] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
883 [ 1.227204] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff92ef8e0db348), AE_NOT_FOUND
(20160930/psparse-543)
884 [ 1.227217] coyote kernel: ata4.00: configured for UDMA/100
----------
What is this all about? Is this a real problem or a false alarm? How
do I fix it?
thanks,
Bill.
5 years, 5 months
Install on Zotac Zbox CI327?
by wwp
Hello there,
(after a looong time not using Fedora, just back to it!)
I've tried installing Fedora on a Zotac Zbox CI327 (Intel Celeron
N3450 inside) but this happens to fail. I've tried F25 but it has
not the right kernel to make it (I've read about 4.10 minimum), then
tried F26-Alpha-1.7 Live and Rawhide-20170518 Live but none could
reach the graphical login. They both boot, some steps take a lot of
time and I end up in a state I don't understand but which is not
friendly ;-).
Here's a link to a rdsosreport.txt file generated using Rawhide, I must
admit that I don't know what to do now..
https://paste.fedoraproject.org/paste/iRx8d~7Luk2TC3bsaDuuT15M1UNdIGYhyRL...
BTW, I could install and run a Ubuntu 17.10 daily
(artful-desktop-amd64-20170519.iso) - wow it starts up pretty quickly -
and that gave me hope!
Any hint or experience w/ such hardware?
Regards,
--
wwp
5 years, 5 months
VPN Interface not Remaining Active With Firewall?
by Stephen Morris
Hi,
When I start one of the two vpn definitions, that have been in
networkmanager for years and used to work fine (I haven't used them in
quite a while), it starts and I get a pop-up message saying that
interface tun0 has been activated in the firewall default zone (being
fedoraworkstation). This interface remains active for about a minute or
so until I get the pop-up message that interface tun0 has been
deactivated in the firewall default zone, and the vpn is no longer
connected. The vpn connection is using Openvpn.
I have checked dmesg for any message relative to tun0 or firewall
and there are no messages for either. How do I determine why the vpn
won't stay active?
regards,
Steve
5 years, 5 months
Changing mount options without restarting
by Patrick O'Callaghan
I'm getting "filesystem not responding" messages from an NFS-mounted
NAS which I suspect is just slow (it spins down its disks when not in
use). I'm using automount and that appears to be related as it never
used to happen with normal mounting. I've changed the 'timeo' parameter
in the /etc/fstab line and run 'mount -a' but the mount parameters for
the filesystem have not changed. I've also restarted anything that
seems relevant from systemd:
systemctl restart storage-Backups.mount
and
systemctl restart proc-fs-nfsd.mount
and
systemctl restart proc-sys-fs-binfmt_misc.automount
to no effect.
How can I get this to work without rebooting?
poc
5 years, 6 months
Optical track ball finally arrived
by Robert Moskowitz
Thanks to all.
The kensington Expert Track ball arrived today. Crazy Michigan
no-fault... It had to be ordered via a doctors order for workstation
modification and then through an approved medical supply house that
could only order it directly from Kensington...
But it is here and I CAN work with it left-handed. This keeps my right
hand on the keyboard with less stress not having to reach for a
right-hand mouse (I just could not control a regular mouse left-handed).
This is going to make a difference in my work and my recovery.
BTW, I am taking my first steps without a cane and am 'graduating' to
out-patient PT for the walking. But the dislocated shoulder has another
3 weeks to go...
Take care
5 years, 6 months